Would Anything bad happen if i put in the SIM unlock code through Android?
Using latest HyperDroid build.
1024 LEO
MrBox
I used to use the sim lock through winmo, when I installed android I didn't have a problem (cant remember if it worked or not in android). Ive removed the lock since, but nothing bad ever happened.
FlYiN <*}}}><
htc hd 2 android froyo 2.1 how do i enter sim unlock code?
i have an htc hd2 running on android froyo 2.1 from NAND is it possible to use the sim unlock code while the phone is still on android
Since someone else had dug up this old thread, I wouldnt mind finding out the answer too.
I have a T-Mob HD2 with Android on NAND. It is currently sim locked to T-Mob but I plan on moving to 3 in the next few months. Is it possible to enter the unlock code via Android or would I need to go back to Win Mo, Enter the unlock code and then back to Android?
Thanks
Yeah wondering whos going to be the labrat to give it a try and let us know how it works out
menz83 said:
Since someone else had dug up this old thread, I wouldnt mind finding out the answer too.
I have a T-Mob HD2 with Android on NAND. It is currently sim locked to T-Mob but I plan on moving to 3 in the next few months. Is it possible to enter the unlock code via Android or would I need to go back to Win Mo, Enter the unlock code and then back to Android?
Thanks
Click to expand...
Click to collapse
I will be able to answer this soon as I have just ordered my unlock code from T-Mobile. Apparently it could take up to a month for it to arrive though!
It will work fine. There are no limitations on the sim depending on what software you're using.
Sent from my HD2 NANDroid using XDA App
MattOG said:
It will work fine. There are no limitations on the sim depending on what software you're using.
Sent from my HD2 NANDroid using XDA App
Click to expand...
Click to collapse
I thought I remembered someone trying to unlock the phone while in android and it wouldn't stick... it accepted the code but it kept showing as locked. Maybe it was with WP7... I can't remember. I'm getting my unlock code today, but I have wp7 on nand and android on SD, and I doubt we can sim unlock our phones while in sd android, but I might try it while in WP7 and see.
Wait, are we taking about the PHONE unlock code? Ie, phone is locked to T-mobile etc. or the SIM code, ie, put a pin in before you can use the sim.
Sent from my HD2 NANDroid using XDA App
MattOG said:
Wait, are we taking about the PHONE unlock code? Ie, phone is locked to T-mobile etc. or the SIM code, ie, put a pin in before you can use the sim.
Click to expand...
Click to collapse
As in my phone is network locked to T-Mobile and want to use an unlock code so I can use my phone on another network.
Yes, the 8-digit SIM unlock code can be entered through Android. I did it to my wife's phone 2 days ago.
secano said:
Yes, the 8-digit SIM unlock code can be entered through Android. I did it to my wife's phone 2 days ago.
Click to expand...
Click to collapse
So did you test it by putting a AT&T or whatever sim card in? Where you able to get 3G on a different network? I will be ordering my Sim Unlock code soon and it would be awesome if I didnt have to install winmo
Got my unlock code today. Put an o2 sim card, entered unlock code and worked fine. Tried with a vodafone sim card afterwards and it also worked fine too.
Sent from my HTC HD2 using XDA App
wrecless said:
So did you test it by putting a AT&T or whatever sim card in? Where you able to get 3G on a different network? I will be ordering my Sim Unlock code soon and it would be awesome if I didnt have to install winmo
Click to expand...
Click to collapse
When i asked for an unlock code i got a 15 digit code, (this is form T-Mobile).
Guys,
I hope we talking about network locked mobile devices. ;-)
My hd2 is on android and I get unlock code. But when I put different sim card, everything's work fine except radio, of course (no service). What is procedure to input network unlock code?
If I remembered correctly, when hd2 was on win6.5 and I put different sim, phone asked to unlock code. Now is a big difference.
Any suggestion?
Someone may explain the steps for introduce the unlock code under android? Because with android installed the HD2 dont ask about unlock code when i pu no T-MOB sim card.
not sure why code is not worknig.
I have an HTC HD2 Leo locked by t-mobile. I installed Android on it. I am entering the code to unlock and I am getting back to the same message again. Do I need to install windows back on it again? I get an error saying incorrect password. Maybe my code is not correct. Any clues would help tremendously. If I put a t-mobile sim card in it I do not get the prompt but again no signal since it is not active.
Thanks,
Sophronis
this may sound strange but my unlock code only worked under windows!! So after spending a few hrs I rolled back to windows enter the code, then back to Android and everything worked fine.
Related
Hi. I am using an unlocked T-Mobile HTC HD2. I purchased it unlocked so I don't have the unlock code. Is there a way to retrieve it from the phone? I thought I might be needing it since there's a new ROM update for T-Mobile HTC HD2.
As far as i know, once this phone is unlocked, it will always be unlocked. Its not like the iphone where every time you get a new update, you have to re-jailbreak and unlock the phone.
adamhlj said:
As far as i know, once this phone is unlocked, it will always be unlocked. Its not like the iphone where every time you get a new update, you have to re-jailbreak and unlock the phone.
Click to expand...
Click to collapse
Thanks. I'll do a ROM update later today and I hope you're right or else I'll have to pay for an unlock code again. BTW, are there instances when we might need to re-enter the unlock code?
haydendo said:
Thanks. I'll do a ROM update later today and I hope you're right or else I'll have to pay for an unlock code again. BTW, are there instances when we might need to re-enter the unlock code?
Click to expand...
Click to collapse
Once the phone is SIM unlocked it will not get relocked when flashing a stock rom.
An unlocked phone is nothing illegal (since you can get the code from the carrier). I really don't see the reason to have the code.. If you are sending the phone in for repair, that should not be an issue unless you have a cooked ROM installed.
Hi guys,
I need some help as i've not been able to find anything searching around.
I have a T-Mobile HTC hero from my study abroad in England, then i want on to by an unlocked x10, and had left my hero apart. Now i was trying to unlock it to give as a gift to my brother, but after hard resetting i''m left at the First-Time Setup,
it is asking about the sim, but no other then the T-Mobile sim (which i dont own now) will work.
Can anybody please tell me how ca I get past this and manage to root my phone?
Well, you could follow through with your plan and unlock the phone. Then just follow through the setup with another SIM, then root. You don't need to root to unlock a phone.
First thank you for the quick reply.
but the problem is that with another sim, it just says Sim Locked, no setup no nothing,
while without any, it says please insert a sim
As said above, rooting won't help you unlock.
I've got a t-mobile hero here, and I unlocked it. Basically, you get the IMEI number, and you buy a code to unlock based on that IMEI.
You usually enter this code where it says SIM locked. I'm sure a little button appeared for me which let me enter my unlocking code.
But you can't do much without a SIM in the phone.
You can root without a SIM, normally, depending on what version of the ROM you are using
Well,
Isnt it that, if i manage to install a custom rom, my phone will be unlocked?
It is what i have been doing in WindowsMobile era.!
agron123456 said:
Well,
Isnt it that, if i manage to install a custom rom, my phone will be unlocked?
It is what i have been doing in WindowsMobile era.!
Click to expand...
Click to collapse
Nah, unfortunately not. The baseband is the part that gets unlocked, and no amount of flashing custom ROMs, updating radios etc will unlock it.
Buy a code and use it
That's my recommendation. I paid £6.75 roughly for mine on ebay. A lot will do it instantly when the seller is online. Just get someone who has huge positive feedback.
thank you
now i get it
can you point me to the one where you bought your code?
agron123456 said:
thank you
now i get it
can you point me to the one where you bought your code?
Click to expand...
Click to collapse
This is similar to the one I got mine from. I know people who have used this seller without issue.
http://cgi.ebay.co.uk/HTC-Unlock-Co...&pt=UK_Phones_Software_RL&hash=item3a5cbe7621
Hello guys,
got one atrix at&t 4g in hands right now wich cant accept any sim card. Even the at&t one. Customer told he bought it as unlocked at am usa bestbuy shop and as arrived in home realised it´s locked indeed. As far i can see also to at&t sim card as it asks for network pin. I tried to updated it to [STOCK ROM] Android 2.3.4 Gingerbread 4.5.91 (Safest Update) following xda guide, but it keeps locked also to at&t. N tip or help from someone?
Rgds,
Buy an unlock code perhaps?
i tried
Pat123 said:
Buy an unlock code perhaps?
Click to expand...
Click to collapse
i did it, but the 8-dig unlock code did not work. Will try a 16 dig from a diff supplier. Weird is it should accept at&t sim card. But it doesnot.
im having a bit of a hard time understanding what u mean by the ATT sim not being accepted..if u mean there no signal when u put the sim in, its because ur friend bought it without activating it with an ATT number most likely. In which case a non active ATT sim will not register with the Roaming partners which will show up on ur phone as no service. Get a valid code from a seller such as cellunlock.net i used them and they're code worked perfectly, once u sim unlock the phone then put in a SIM from ur country and it should pick up signal all u have to do then is create a motoblur account or choose to skip that process.
none sim card
djkinetic said:
im having a bit of a hard time understanding what u mean by the ATT sim not being accepted..if u mean there no signal when u put the sim in, its because ur friend bought it without activating it with an ATT number most likely. In which case a non active ATT sim will not register with the Roaming partners which will show up on ur phone as no service. Get a valid code from a seller such as cellunlock.net i used them and they're code worked perfectly, once u sim unlock the phone then put in a SIM from ur country and it should pick up signal all u have to do then is create a motoblur account or choose to skip that process.
Click to expand...
Click to collapse
Thany u for replying...
Sorry man for yr misunderstading. Wht i mean is wht i said: it does not accept any sim card. Neither one from at&t. Then, if i insert an at&t sim card (yep, i have more than 4 of them) phone asks for network pin, just like it asks when i insert other operators sim card, like claro brazil (i.e).
Its regular expected behavior should be accepting, at least, the at&t sim card since it´s from usa at&t. Of course it would not show network signal cos i am outside usa and my at&t sim cards have no credits, but it should not ask for a network pin when a at&t sim card is inserted.
Rgds,
Gingerblur
Hi there Antonio. Had same problem here in Peru. Thanks to Tenfar´s CMW recovery and Gingerblur I managed to make my Atrix work with Claro Peru and Movistar. Just look for them in the development forums.
duvate said:
Hi there Antonio. Had same problem here in Peru. Thanks to Tenfar´s CMW recovery and Gingerblur I managed to make my Atrix work with Claro Peru and Movistar. Just look for them in the development forums.
Click to expand...
Click to collapse
Can you explain what exactly it was that you did to resolve this issue??
up... up...
no success with tenfar´s as suggested by Duvate. N other help pls?
Rgds
8)
sounds like the phone is asking for a SIM Pin or what's known as a PUK Code, which unfortunately if u dont know it, u have to contact the carrier of the sim card for it, my advice would b to try to get a sim unlock code, put the code in just to make sure it is unlocked, then stick the sim for ur country's carrier inside the phone. It will probably ask for a pin again at that point call ur provider, and give them the imei/serial of the sim and ask for the sim pin/puk code. hopefully that resolves the problem. Also do not try to guess the code more then 3 times or u will fry/burn ur sim card and will need a new one.
Network pin code
djkinetic said:
sounds like the phone is asking for a SIM Pin or what's known as a PUK Code, which unfortunately if u dont know it, u have to contact the carrier of the sim card for it, my advice would b to try to get a sim unlock code, put the code in just to make sure it is unlocked, then stick the sim for ur country's carrier inside the phone. It will probably ask for a pin again at that point call ur provider, and give them the imei/serial of the sim and ask for the sim pin/puk code. hopefully that resolves the problem. Also do not try to guess the code more then 3 times or u will fry/burn ur sim card and will need a new one.
Click to expand...
Click to collapse
Thank u man, but it prompts for network pin code, no sim card pin code.
Thank u again. I appreciate it.
antoniolcrd said:
Thank u man, but it prompts for network pin code, no sim card pin code.
Thank u again. I appreciate it.
Click to expand...
Click to collapse
Are you sure it's an ATT Atrix? Could it be that you have for example a Bell Atrix?
p.s. according to widely spread beliefs, if you type in the network unlock code wrong too many times, the phone will become hard locked, meaning it won't accept any sim card. could be that the person you got it from did just that.
If you can still put in a network pin your good. See, you may have an AT&T sim, but it has no service so the phone wont read it until it's unlock. You need to purchase an unlock. DO NOT GO GUESSING. I believe the Atrix has 5 attempts before locking you out forever.
at & t
@xploited
yep, it´s from at&t. It is bundled into at&t pack and also i flashed it OTA last at&t release.
@Purple Drama Llama
yep, it still asks for network pin code to unlock. No one msg like contact operator or phone freezed or whatever. Then i think it may not be hardlocked... yet.
p.s: ordered a third supplier an unlock code. Hope not be refunded this time since i hope it may work good. Wish me luck.
Rgds,
Hi, guys. I have the same problem i've purchased atrix without contract in the at&t retail store, they e-mailed me the unlock code, but the code is wrong i said it to them, they were surprised and e-mailed me another one and it is wrong too they (in the att store) said, that either of them should work and they don't know what to do. i still cant use my sim card. At&t sim was never used in that phone. is it important to have att sim inserted even once? and what to do with the phone?
baseband needed
Hello guys,
pls would some1 upload here the baseband version 1.77.07p?
thnk u all.
antoniolcrd said:
Hello guys,
pls would some1 upload here the baseband version 1.77.07p?
thnk u all.
Click to expand...
Click to collapse
May wanna search in the correct forums for stuff like that probably get more responses.
Sent from my MB860 using xda premium
At Last!!!!
Hello Folks,
at last i managed to solve it. Flashed 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf back and got the same: unsuccesfull unlock. Then flashed the baseband Retail Brazil Radio.sbf and enter the unlocking code from at&t and Voila... unlocked!!!
Thank you all. Let me quickly get into Aura
Hello!
Junior
I'm also from Brazil and I am having the same problem!
Spend more details on how you achieved this miracle! if you can make the files available used would be great!
I'm with version 2.3.4
Abs
I'm a N00B, but I've spent close to 30 hours reading up on posts the past three days. I have the same problem as stated in the original post... even my AT&T sim results in a request for the unlock code now.
I started with an AT&T Atrix. I unlocked the boot loader, put CWM recovery on, put Alien v4 ROM on...then the next day AT&T called me with my unlock code for international use. When I put a new sim in it asked for the code, but did not accept it "Network unlock result unsuccessful" Two other sims just immediately went to "Subsidy Lock ..." statement without asking for the unlock code... then my AT&T sim stopped working, and went to asking for an unlock code right away. Phone also will not pick up any signal, nor connect to any networks
I have entered many codes many times, and not circumvented the error, nor permanently locked it...
My next steps are to install the Gingerbread 2.3 ROM available here: https://supportforums.motorola.com/thread/49191?start=0&tstart=0
Then use RSD lite to flash the AT&T 4.5.91 firmware available here: http://forum.xda-developers.com/showthread.php?t=1125944
After which I am hoping I can enter the unlock code, then re-unlock the boot loader, and flash back to alien v4 ROM again.
Do you think this will work, or have any other better ideas?
Should I use RSD Lite to flash the original firmware .sbf file?
My best guess is that the unlocked boot loader is preventing the phone from carrier unlocking ???
Extra credit:
- any idea how the phone is not permanently frozen after entering unlock codes up to 50 times?
- Will I need to put CWM recovery on the phone again?
- Any idea how the AT&T sim stopped working (while still working fine in another phone)
Please help and I hope this post will help others...
the boot loader unlock .sbf was only 13 MB, but the original 4.5.91 AT&T firmware .sbf is 1.5 GB unzipped... is flashing this mega-file through RSD lite the way to get this operating, or warrantee returnable again from its present state of unlocked boot loader, and not accepting any sims? Thank You
---------- Post added at 04:31 PM ---------- Previous post was at 03:31 PM ----------
FYI: when installing the MotoBlur Gingerbread 2.3 ROM I get a
"Verifying current system...
assert failed: apply_patch_check ("/... lots of alphanumerics
E:Error in /sdcard/Blur_Version....
(Status 7)
Installation aborted"
any ideas? Thanks for your time on this...
Hello
Yesterday I loaded WP 7.5 Mango. According to different directions, and every time I'm out of range.
What I doing wrong? I use a turbo sim, because the phone has a lock on another carrier.
Before and after returning to the extent it is WM 6.5. Everything works fine.
Maybe someone had a similar problem?
not understand quit right this quote:
According to different directions, and every time I'm out of range.
Click to expand...
Click to collapse
but did your HD2 SIM unlocked or not? did your SIM card same provider as locked HD2?
you must first SIM unlock if you want use other SIM cards, unlock can be done only in WM6.5 and unlock code
dxdy said:
not understand quit right this quote:
but did your HD2 SIM unlocked or not? did your SIM card same provider as locked HD2?
you must first SIM unlock if you want use other SIM cards, unlock can be done only in WM6.5 and unlock code
Click to expand...
Click to collapse
My HD2 has a SIM lock, but I use "X-SIM/Turbo-SIM( card to unlock)
On WM 6.5 "X-SIM/Turbo-SIM works perfect bypasses SIM-lock
ok... i think this not work with WP7...
Hello xda-developers community!
In a few days I will be acquiring my friend's old Verizon HTC Trophy. I know that it's dual-band CDMA/GSM, and it has a Verizon SIM card in it. I use an iPhone 3GS on AT&T. Is it possible for me to carrier unlock the Trophy and use my AT&T SIM card in it? I really need a phone upgrade but my contract with AT&T ends in a year and a half. I'd prefer to be able to unlock the Trophy without having to use a site like freeunlocks.com and such, because i don't really trust them...
Any help is much appreciated!
Thanks,
drsn0w
On a related subject. Does Verizon lock out the US GSM bands on this phone like they did the global droid models?
If so, thats something else you need to deal with.
Im presently researching this, and may report back with what I find.
Also, if you cant get a carrier unlock free, i've used swiftunlocks several times in the past with great results. And he's cheaper then most of the others.
Unfortunately, it seems that I won't be getting the phone after all. apparently Verizon wants it back
Sent from my Nexus 7 using xda app-developers app
have problem with activation
i use verison trophy with gsm card, i bought unlock code on ebay from 2 different ellers and they have send me same code, now when i try to type it phone says *incorrect pin* and i have 65481 attemps
i had custom rom with hspl, then i have flash stock rom for hspl and have same problems
how can i unlock it?
yurchik92 said:
have problem with activation
i use verison trophy with gsm card, i bought unlock code on ebay from 2 different ellers and they have send me same code, now when i try to type it phone says *incorrect pin* and i have 65481 attemps
i had custom rom with hspl, then i have flash stock rom for hspl and have same problems
how can i unlock it?
Click to expand...
Click to collapse
most likely, you have the code wrong.
confirm you sent the correct IMEI.
Use the one from the phone software. *#06# in GSM mode, and NOT one on a label.
when i press *#06# i get 35176404780445101, in about it is 35176404780445
both unlockers used 35176404780445 when gave me code
what is problem i dont know
please help me, i have proplem like this first time, i unlock lot of phones but this 65k attemps is something evil
yurchik92 said:
when i press *#06# i get 35176404780445101, in about it is 35176404780445
both unlockers used 35176404780445 when gave me code
what is problem i dont know
please help me, i have proplem like this first time, i unlock lot of phones but this 65k attemps is something evil
Click to expand...
Click to collapse
Um, its pretty obvious what the problem is.
YOU USED THE WRONG NUMBER.
USE THE NUMBER FROM THE #*06# as I said above.
i have bought third code with imei from *#06# and it is same
i still cant unlock it and i have 65458 attemps
i have flash stock rom and still have not unlock it
help me please