Hi I have 2 vibrants im triying to install new roms 1 of the vibrants works excellent but the other one when i turned off the phone and press the volume keys and press the power button I only see the battery charging also if i press the volume keys and the power the phone restar normally dont see the other screen any help. (debug mode is mark also mass storage)
Related
Power button does not respond at any point.
*EDIT:except after battery out for a long time, then power button WILL turn the phone on, but then continues to not function as per usual.
However, the phone automatically turns on as soon as the battery is placed in, so it's not dead at least.
Also can not get the phone to be recognised on either of two computers (one running Win 7 and the other Vista) always get "device has malfunctioned etc"
Have re-flashed a ROM from SD but same problem. If holding down the Vol Down on start up (putting the battery in) I can get to bootloader, hence the re-flash. But holding down both gets to the hard reset 'warning' screen, but it won't let me press Vol Up to actually do the hard reset.
All in all a frustrating problem which means I have to remove my battery to turn my phone off and have to use the option from Windows Menu to lock the device.
Any help with any of the problems is greatly appreciated.
Also Power Button mechanical function is still normal.
Many thanks.
Sounds like your end key has become faulty as well as your volume up button. Both of witch are common issues, especially the end button, but most peoples volume down button wears out first. This is do to the fact that the end/power key is in constant use from turning on and off the HD2 or from getting MAGLDR to pulled up a bootup for those running NAND Android. Also the volume keys take a lot of wear and tear from constant volume adjustment especially if you listen to alot of music on your HD2. Plus the volume ..down key takes extra wear and tear from being used to enter bootloader.
hello
hello vsem
Yes it does seem that way, however I have had teh battery out over night, when I put it back in this morning it DID NOT automatically initiate the boot sequence. But it did after I pressed the power button, so it must have read it to some extent?
Also when the phone is on I can change the volume up and down as per usual, its all a bit strange.
Any other way to initiate a hard reset other than that menu?
Thanks very much!
It seems you are having a hardware issue, try sending your device to the service centre.
Hi,
I just got a used T-Mobile HD2. Tried to power it on by following methods, but none of them works:
1. Press "power" button; no reaction;
2. Press "vol up + vol dn" and "power" button, no reaction;
3. Reset using the yellow button underneath the battery and re-power, no reaction;
4. Charging it using wall charger, the phone start to vibrate periodically and the screen start to flash with "stick together" page, but the charging led light is still OFF.
Is this a hardware problem? Anything else I could try ? Thanks.
With the charger plugged in and on, try the vol up and down together and press both and power button, hold down till the 4 colour screen comes on then flash a new raido and then a new rom, use a 50 radio
It could be hardware only time will tell
My A3 doesn't "wake up" from stand-by.
If I reset it keeping pressed power up button, it correctly reboots, I can see all boot process and it correctly reachs the starting home page.
If I keep touching screen, open apps, navigate from various menu all works fine. But when I leave it without pressing any button/screen for 10/15 sec (display power off delay) the screen correctly goes black, but there's no way to wake up it again although it seems working. The A3 "under" works because plugging to AC Adapter beeps the sound of charging in progress, PC (Kies or SmartSwitch) detect it correctly; only the screen remains black.
I already tried to wipe and even reflashed last firware with Odin but with no luck.
Is there anything else that I can try (except send it to repair center...)?
Thanks in adv
JYD
P.S. When I call It from another phone, it rings but the LCD remains black and doesn't respond clicking vol +, vol - and home buttons
P.S. 2 Thinks become "funny": Home button, vol + & vol - don't work at all. Power button powers off display, but long pressing it, doesn't pop up power off/reboot menu. Softkeys don't work.
Sounds like SoD. Try installing the app "Wake Lock" and choose the PARTIAL_WAKE_LOCK option.
Hello, some days ago my phone suddenly got black screen, the buttons light ON, it also vibrates, if i double press the home button it enter the camera because the shutter souns, led notification also lights, seems like everything work but the screen keeps black..
I tried sme of the method around the web:
Power button + volume down (FAILED)
Power button + volume up (FAILED)
Power button + volume down + Home (FAILED)
Power button + volume up + Home (FAILED)
Delete cache (FAILED)
Factory Reset (I THINK IT FAILED, IT WAS HARD TO ENTER TO RECOVERY AND SELECT FACTORY RESET SINCE THE SCREEN DOESNT TURN ON)
Anything else i could do to get my phone back working..
I cannot take it to customer center because i bought in USA and Im from Mexico
Thanks in advanced guys
renehd2 said:
Hello, some days ago my phone suddenly got black screen, the buttons light ON, it also vibrates, if i double press the home button it enter the camera because the shutter souns, led notification also lights, seems like everything work but the screen keeps black..
I tried sme of the method around the web:
Power button + volume down (FAILED)
Power button + volume up (FAILED)
Power button + volume down + Home (FAILED)
Power button + volume up + Home (FAILED)
Delete cache (FAILED)
Factory Reset (I THINK IT FAILED, IT WAS HARD TO ENTER TO RECOVERY AND SELECT FACTORY RESET SINCE THE SCREEN DOESNT TURN ON)
Anything else i could do to get my phone back working..
I cannot take it to customer center because i bought in USA and Im from Mexico
Thanks in advanced guys
Click to expand...
Click to collapse
Fast fast try to return it before Trump wins . He will build the wall you know... Jk...
For my opinion LCD has to be changed. Due drop or in your pocked from high pressure i think its gone ...
Since as you said phone is working you can take pictures or receive calls but screen is always black.
Can you see its black color or screen isn't turning at all.
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Mine started with green stripes allover the screen and few days later - "black screen"
Samsung change the whole unit.
But if lcd doesnt work so, it wont recognize when i press the screen, can it?
Anyone with this problem
cavags5 said:
Anyone with this problem
Click to expand...
Click to collapse
It's hardware issue.
https://forum.xda-developers.com/showpost.php?p=70499471&postcount=73
S7 Edge BSoD Extra Info. needed
Hi,
Phone: I have a Samsung Galaxy S7 Edge SM-G935FD
I was using my phone to send a txt (and at the same time I think I was receiving a text or call because the menu and back touch buttons were lit up) and all of a sudden the phone crashed as I tried to finish my text but the touch wasnt responding, then the backlight turned of like it does if the phone is not being used. But the strange thing was that the menu and back touch buttons stayed lit up (Solid).
I tried many methods to restart the phone:
Power button + volume down (FAILED)
Power button + volume up (FAILED)
Power button + volume down + Home (FAILED)
Power button + volume up + Home (FAILED)
So I thought I'll let the battery die and then recharge and hopefully the phone would automatically restart like normal, however the phone does not show sign of charging now.
So I tried to connect to the PC but it wasn't being recognized however when I press and hold the power button a sound of detecting a device sounds and then when I take my finger off the sound of detaching occurs. But I couldn't see anything happening, until I went into device manager, under "Other Devices" , "Exynos8890" appears which I know is the chipset.
This is as much as I know of the problem. How do I solve thins problem without trying to factory reset the phone and lose all my data?
PS: I didn't backup my photos (My baby children only copies) or Notes in NotePad, which has some very important info.
Good morning all,
I apologize in advance for spelling mistakes.
Here I explain my problem on my smartphone, I buy a model S7 edge SM-G935F 32GO.
here I wanted to install one ui under android 9 so in custom rom but during this famous installation my phone crashed so me on that I wanted but nothing black screen ..
noted that I have about 56% left so on that I did not understand why we should not restart.
so i went home
I connect my phone to the mains but it goes nothing at all I don't have the animation of the battery which charges it and I also try the manipulation of the volume key - more power etc
but nothing but I could notice that when I connect the phone to the pc it connects but immediately after that it disconnects.
Thank you good day to the whole team
PS if I got the wrong category I apologize
Press and hold together: Volume Up + Home + Power button for a couple of seconds. Factory reset: After that select from Recovery Mode menu "wipe data / factory reset" using Volume buttons to navigate and Power button to confirm.
or if not
Press and hold together: Volume Down + Home + Power button for a couple of seconds.
And try to flush again