I don't know if this is really just a "screen lock with disabled bits" or if this is some full-blown idle mode, but I was wondering...
I don't have any car-accessories, but I'd still like to use TomTom. Now, TT offers some nice voice guidance, which is more than enough for just getting around (if I ever get really lost, I can pull over and pick the thing out of my pocket).
However, leaving TT running in my pocket means that the screen is on, the display changes and thus battery will be drained considerably faster than if the thing would be locked... not to mention an accidental press of a button (it's in my pocket, after all).
However, locking the phone turns the GPS off, so even if I leave TT running in the background it does me no good.
Is there anything I could try out in such a case?
So... this is impossible? :/
Nothing specially made for that has been released that I know of.
But from info I could gather around, RunGPS has the capability to be set to turn off the display leaving the GPS running.
So you could just install rungps as well, set it to turn off the display with GPS on, and at the same time also run your fav GPS app, tomtom in this case.
What should happen is that the screen will go off with the GPS still working (thanks to rungps) and tomtom will run in background being now able to access the gps device (still thanks to rungps).
Still worse for battery than having only the useful app running (as rungps will take some cpu cycles for itself and will cause more load on the device) but should still be better than leaving the display on at all times.
Let us know your results.
hey what do you know, 900th post
Hmmm... strange... Last I've noticed my GPS kept runnung while the device was locked. I used NaviComputer to track a walk I did with a friend and had my HD2 locked in my pocket most of the time.
ThoroSOE said:
Hmmm... strange... Last I've noticed my GPS kept runnung while the device was locked. I used NaviComputer to track a walk I did with a friend and had my HD2 locked in my pocket most of the time.
Click to expand...
Click to collapse
uhm, don't let that fool you.
First times I used navicomputer just for fun, I thought gps was running in background, but only later I realized that the GPS signal was restored right after turning on the display, and navicomputer was showing a straight line going from my latest positiotn before turning off the display, to the first positiotn it got after wakeup... and I'm sure of that since I double checked several times
In case you check and you DO have your GPS on at all times with device in standby using navicomputer, please let me know the list of installed programs you have (I doubt it tho)
jan-willem3 said:
Change this with your registery
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Unattended]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
Normaly the numbers are on "4" - put this on "1" and gps should stay awake even when you put the phone in standby.
It will stay on until a program stops using the gps.
Click to expand...
Click to collapse
Bib_x said:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\State\Unattended]
"gps0:"=dword:00000001
This was already "0". I changed it to "1", too.
Click to expand...
Click to collapse
Try this. It works on my HD2. I use Run.GPS to log my tracks while jogging or mountain biking.
Other way to keep gps-fix while screen is off - you have to do only a "screen off", not "standby". I did it with AEButtons+ (e.g. screen off on long-press green call-button) - but with this reg-changes it works better for me.
Or you can only lock your phone and let it go to standby on its own. Then gps-fix will still keep alive. GPS-fix only gets lost if you press hardware-power-button (red end call button) - and registry not changed like above.
Bib_x said:
Try this. It works on my HD2. I use Run.GPS to log my tracks while jogging or mountain biking.
Other way to keep gps-fix while screen is off - you have to do only a "screen off", not "standby". I did it with AEButtons+ (e.g. screen off on long-press green call-button) - but with this reg-changes it works better for me.
Or you can only lock your phone and let it go to standby on its own. Then gps-fix will still keep alive. GPS-fix only gets lost if you press hardware-power-button (red end call button) - and registry not changed like above.
Click to expand...
Click to collapse
Awesome, thanks!
I'll try it out tomorrow. A bit too late to go for a walk now.
Bib_x said:
Try this. It works on my HD2. I use Run.GPS to log my tracks while jogging or mountain biking.
Other way to keep gps-fix while screen is off - you have to do only a "screen off", not "standby". I did it with AEButtons+ (e.g. screen off on long-press green call-button) - but with this reg-changes it works better for me.
Or you can only lock your phone and let it go to standby on its own. Then gps-fix will still keep alive. GPS-fix only gets lost if you press hardware-power-button (red end call button) - and registry not changed like above.
Click to expand...
Click to collapse
as far as I know rungps is able to use the gps during screenoff as a feature.
I tried locking the device without pressing endbutton, but navicomputer loses the fix no matter what.
I also noticed thos reg patchesin some other thread but I also read there that other users tried them with no avail; did you test those registry fixes with software other than rungps by any chance?
Without these reg-changes i tested RunGPS and when i press hardware-power-button - GPS-fix was getting lost.
If i only did a screen off - then GPS-fix was still there.
Now with these reg-changes i can press hardware-power-button during running RunGPS and GPS-fix is still there.
I did only test with RunGPS because that is the only GPS-app i want to use while screen is off/device in standby.
If i use a navigation software (iGo8), then i want to have screen always on- so i didn´t test this scenario.
Bib_x said:
I did only test with RunGPS because that is the only GPS-app i want to use while screen is off/device in standby.
If i use a navigation software (iGo8), then i want to have screen always on- so i didn´t test this scenario.
Click to expand...
Click to collapse
I see, thank you, let's wait for the OP to test this himself.
Since I already knew rungps has a feature to turn off screen without losing gps signal, I don't think it's the reg settings, but rather it's rungps itself that allows you to do that; since you couldn't test different apps we don't even have a verification
I may try to get at it tomorrow, no guarantee I'll have the time tho
I´ve installed sportypal, too. Maybe i can make some tests this weekend.
Bib_x said:
I´ve installed sportypal, too. Maybe i can make some tests this weekend.
Click to expand...
Click to collapse
us wants tests with navicomputer
No really, navicomputer is cool anyway, so install that too since you're at it
All right! I'm back with some results. Now, a quick note: I switched to MapaMap, a Polish map application, as it has a lot better maps for Poland.
I performed two tests: firstly, I started a route around the street and used the softftware lock to lock the screen. Result? MM application kept running and kept talking to me. Nice. However, this is still vulnerable to the physical button being pressed and locking the phone; when that happens, MM looses GPS and, in fact, I think the system somehow pauses this applicaiton altogether (more on that in the next bit).
So, since the physical button is still possibly a problem (after all, during driving the phone is in my pocket, and it's not really difficult for that button to be pressed), I tweaked the registry as Bib_x suggested. However, it seems that even IF the GPS module was still running, the MM application enters this weird suspended state, and whenever I resumed it, it would always greet me with a "searching for GPS signal" message. Granted, it would find the signal very quickly, but it still didn't work while the screen was off.
The odd thing is that mode the application went into. Normally, when it's minimised, I can pick it from the task-switcher and bingo! It's instantly back up. But when I press the hardware lock button and then unlock the phone, I get the Windows "please wait, I'm working" wheel in the centre for a while, before the app is restored.
I can check with TT again to see if the problem is restricted to only MM, but something tells me it's not an isolated case. So now I'd need to figure out a way to keep MM working when the phone is locked; kind of like the music player.
EDIT: TomTom resumes a lot faster, but it still looses GPS; right after resuming it says "no GPS device", and that's with the registry changes applied and after restarting the phone.
Shaamaan said:
EDIT: TomTom resumes a lot faster, but it still looses GPS; right after resuming it says "no GPS device", and that's with the registry changes applied and after restarting the phone.
Click to expand...
Click to collapse
exactly my experience with any other gps software.
Didn't even try the reg tweaks as I didn't trust them that much.
Just try installing rungps as per my suggestion and using that at the same time with your fav navigation software, maybe the fact that rungps keeps the gps subsystem working while screen is off makes also the other app do its job.
After some more fooling around, I've made it, albeit I fear this method might be limited to MapaMap only.
When installing MM there are two options: either installing onto the HD2 or directly onto the MicroSD card. The former option will always install something called "wake up plugin" (might be worded differently in English) which doesn't show up in the "remove applications" menu, so it's more of an integral part of MM and probably can't be removed in this case. In the latter option, this plugin won't be installed, and in fact, is unavailable.
Initially, I've installed the app directly onto the phone, so that plugin was included automatically. My guess is that THIS was the bit responsible for putting the app into some sort of "sleep" state. However, when I installed the app onto the SD card without the plugin, I could lock the phone using the end-call button and the app wouldn't shut itself down like that; it even kept talking to me during the ride, so everything worked. Once more, I can confirm: THE SYSTEM KEPT ON WORKING DESPITE BEING LOCKED - I drove quite a distance and took some different turns, and the phone kept nicely informing me of the new distance and of upcoming turns.
This was all done using the registry settings suggested in this thread! Without them, the app will loose GPS data when the phone is locked, and if I set it to record my movements, it'll create a straight line between the start and end point, with a "no GPS signal" in the middle
EDIT: Do the registry values 1 and 4 mean "always on" and "always off"? What about values 2 and 3? I'm assuming there's no way to make the GPS module "smart", so that it's turned on only when needed? Or is it possible to add a manual switch for the GPS module to the Comm Manager?
GPS will only be on if a program sends this comand. And if you end the program, then this program sends a kill-comand to gps.
Have you tried with Pocketshield screen lock?
There is a setting at Locking > "Except when...", there you add exceptions to applications which will be allowed to continue running with the screen turned off.
The reg edits work for me with GPS Tuner and google maps, not with iGO8. I had actually tried that myself, but only the ones in "unattended" and set to 0 instead of 1 (as that's the fix that's used to keep music playing in Coreplayer and that works), but apparently it wasn't enough for the GPS. Good news
So this is sort of a multipurpose post, just saying some of the issue I have had with my Vibrant, and some of the possible solutions or at least information that I believe will help toward finding a solution.
About the GPS, this is what I have noticed:
I am pretty sure this is a software issue and this is why- I've noticed that I only have a problem when I am using the actual GPS and the network based location. I started to notice this first in Foursquare. Even when I could get a lock in Maps (albeit with a blue circle indicating it wasn't terribly accurate) Foursquare would always show where I last checked in... then I realized it wasn't showing where I last checked in, it was showing where I last was located using the GPS. I found that if I turned off the "Use GPS satellites" option, and only used the network location option, Foursquare (and indeed any other GPS program) got my location near instantly. Similarly, when I had only the satellite option checked (and not the network location) as long as I was outside I got a pretty quick and steady lock. When I put both options back on... everything all crappy again. So I've been keeping the actual GPS off unless I'm using navigation, in which case I switch, and I haven't had an issue yet. So I think this is something that they can fix in an update. Any other thoughts would be appreciated.
In regard to Social Network Sync:
It was driving me nuts that half the time I looked in the settings menu it would show that Facebook, Myspace, and Twitter (the Samsung variants) had "errors." Then I realized that for whatever stupid reason, they seem to only run into these errors on wifi. If I turned wifi off and synced... it worked. Turned it back on... didn't work. I tried this a few times. However, that said, the Social Network Sync is kind of broken. For example, even if you have it set to download all of your Facebook friends, after the first time it won't. To add them, you have to go into "Link contact, Get Friends, Facebook" and then check who you want to add .This is kind of annoying, and hopefully will also be fixed with a software update. Again, any thoughts would be appreciated.
About Flash:
This is honestly my biggest issue with the device. If you look in the applications it does have Flash lite. It just doesn't work. Coming from an almost flawless Flash experience on the MyTouch Slide to this is really not fun. The reason this annoys me so much though is because in apps that utilize the browser (for example NewsRob) whenever they load a page that has flash on it, you are kicked into the browser and get an error message (webkit error, file not found or some such.) When I'm browsing through articles in NewsRob it's incredibly annoying to have this stupid error message (which opens the browser, then an error, so it takes three back presses to get back to the article, all of which have a little delay.) Again, this is something that 2.2 should fix, but it's still frustrating. If anyone knows of any possible solution to this it'd be greatly appreciated.
Screen burn in I discovered today.
Much to my dismay, I noticed today that the clock digits were burnt into the screen, much like how the notifications were burnt into the screen on my Nexus One. The difference is that this took awhile to happen on my N1. Not three weeks like I've had the Vibrant. I don't know if this is permanent or just temporary, I have a pure white background open full screen right now, and will run like a color flashing thing next, hopefully this will get rid of it. If not... that's just excessively disappointing. I love love love having what is literally the most advanced screen technology in existence, and having a literally perfect black level, but screen burn in on a few week old device (that has been set at low or auto brightness since day one) is just not acceptable. I will post again after a day or so of white screen/colors and let ya'll know the results. But it's frustrating. Has any one else noticed this yet? Or have any other possible solutions?
Lastly, lag.
I've noticed that the ONLY lag on the device comes from stupid TouchWiz and the Buddies and Feeds widgets. With them disabled the device FLIES. With them on, it's slow and occasionally has to be force closed. For now I have the widgets in question disabled, but this is vastly annoying, and really makes me wish I had my MyTouch Slide back (except with this screen and processor lol.)
So, in conclusion, I generally love this device. But the second T-Mobile announces The MT3GHD, it'll be on eBay faster than you can say Android 2.2 with Espresso lol.
Quick update, jscreenfix app from market fixes the burn in, I let it run for about an hour. I'm going to do that every week just to be safe.
Sent from my SGH-T959 using XDA App
Would you like some cheese with your wine?
Sent from my SGH-T959 using XDA App
c0wb0ycliche said:
About the GPS, this is what I have noticed:
I am pretty sure this is a software issue and this is why- I've noticed that I only have a problem when I am using the actual GPS and the network based location. I started to notice this first in Foursquare. Even when I could get a lock in Maps (albeit with a blue circle indicating it wasn't terribly accurate) Foursquare would always show where I last checked in... then I realized it wasn't showing where I last checked in, it was showing where I last was located using the GPS. I found that if I turned off the "Use GPS satellites" option, and only used the network location option, Foursquare (and indeed any other GPS program) got my location near instantly. Similarly, when I had only the satellite option checked (and not the network location) as long as I was outside I got a pretty quick and steady lock. When I put both options back on... everything all crappy again. So I've been keeping the actual GPS off unless I'm using navigation, in which case I switch, and I haven't had an issue yet. So I think this is something that they can fix in an update. Any other thoughts would be appreciated.
Click to expand...
Click to collapse
Even though I personally believe the gps is a firmware/driver issue, your explanation above does nothing to narrow it to that... You say the GPS doesnt work right when it is turned on...
well... yeah.
blink55184 said:
Even though I personally believe the gps is a firmware/driver issue, your explanation above does nothing to narrow it to that... You say the GPS doesnt work right when it is turned on...
well... yeah.
Click to expand...
Click to collapse
In Location settings, there are two options, Use wireless network and Use GPS satellites. What I am saying is that if BOTH of these options are turned on, it doesn't seem to work properly. If I only use wireless networks, it works (even indoors) but isn't terribly accurate. If I use GPS only, and I am outside, it works, accurately. So I am just saying there seems to be some disconnect between the wireless network location and GPS location working in sync like they normally do.
And (@lemarg) I don't see how my post is whining, I'm just pointing out some observations about the issues I (and other people) been having with the phone. Maybe I misunderstand the point of a forum.
Had the BEST VR experience to date last night using the bundled Gear VR and playing Gunjack/Lands End until phone ran out of juice...
However that experience was marred when I fired the phone back up this morning and found that all the applications have suddenly starting rotating into landscape and despite rebooting twice, I cannot change the behaviour (it was fine yesterday). Ran some sensor checks which appear to be OK. I don't even seem to have a rotation lock button available as I did on my Note 3 as a workaround.
Adding to this, I have also noticed that the fingerprint unlock feature seems to have disabled itself, even though it's still enabled in settings together with stored fingerprints. I know this is a new device, but this is pretty basic stuff that should be working... Not impressed!
Any others having similar issues?
Thanks,
G
Fixed... kinda
I since discovered that the rotate lock had become enabled and is still available on the settings icons (didn't recognise the icon in the locked portrait state). It actually did it again this morning and appears to be defaulting to this state after a cold boot - weird)...
The fingerprint issue appears to have been caused by loss of the screen timeout/instant lock with power button settings; however I hadn't changed these values, so there do seem to be some software glitches that need ironing out...
G
I am sure that I would not even know this except I have the Edge Panel "My Places" which I really like because I can set up a profile for work and have my phone go to vibrate when I pull in the parking lot and can get to the apps easily that I use most.
Well every now and then I have noticed that the profile has switched off of work and to home while I am at work, sitting at my desk and not moving. This has become more frequent in the last week. So when I hear the profile change I have looked at Google Maps and sure enough my GPS lock is showing that I am home. After about 30 seconds this all of the sudden updates back to my work location and the My Places profile updates right away.
I am sure if I did not have the My Places profiles set-up I would never know, but has anyone else ran in to this issue, and if so is there a way to fix this? Thanks
Similar issue here, except mine shows I'm home or wherever my last location was when I had my gps on when I'm trying to check for a route to somewhere, only fix that seems to work is closing and reopening google maps, thought it was a google maps issue, guess not.
*update* the latest update from AT&T this month seems to have fixed the auto-rotate function. I have had no issues regarding this problem since applying the update!
Trying to see who else has had this problem and has been able to find any common occurrences behind this mysterious issue.
I can sometimes go quite awhile before the auto rotate stops working but I don't normally turn the phone to landscape unless I'm viewing photos or looking at a video or maybe some websites that aren't mobile optimized.
Toggling the portrait rotate icon from the drop down does not fix the issue. So far the only way to get rotate working is to reboot android completely. I've had a theory that maybe my magnetic car mount is somehow messing with the sensor in the phone or the calibration of the unit but I've used the same magnet mount with my G3 and never had these issues. also sometimes when navigating GPS it will ask me to calibrate the phone and fly it thru the air in a figure 8 but I'll do that like an idiot and the calibration screen never goes away. I've also used the built in diagnostics inside the settings that check all the sub functions of the phone and everything is apparently working without issue!
..... starting to wonder why I even got this phone.
at&t hasn't even started my 50% off bill credits yet for this device...
undivide said:
Trying to see who else has had this problem and has been able to find any common occurrences behind this mysterious issue.
I can sometimes go quite awhile before the auto rotate stops working but I don't normally turn the phone to landscape unless I'm viewing photos or looking at a video or maybe some websites that aren't mobile optimized.
Toggling the portrait rotate icon from the drop down does not fix the issue. So far the only way to get rotate working is to reboot android completely. I've had a theory that maybe my magnetic car mount is somehow messing with the sensor in the phone or the calibration of the unit but I've used the same magnet mount with my G3 and never had these issues. also sometimes when navigating GPS it will ask me to calibrate the phone and fly it thru the air in a figure 8 but I'll do that like an idiot and the calibration screen never goes away. I've also used the built in diagnostics inside the settings that check all the sub functions of the phone and everything is apparently working without issue!
..... starting to wonder why I even got this phone.
at&t hasn't even started my 50% off bill credits yet for this device...
Click to expand...
Click to collapse
You are not alone. Mine did this yesterday. I had to reboot it to fix it. I do not use a magnetic mount but I do use wireless charging stations and I think they have a small magnet. I have done this for months though and so far the auto-rotate glitch has only happened 2 times.
I have had the same issues. But a reboot won't always fix it me.
problem resolved
latest update patch from AT&T seems to have fully resolved the issue of auto screen rotation not functioning. it now works 100% of the time and is even faster at recognizing when the device has been tilted to and from landscape/portrait