Pals,
I had problem with build 21677, i had replaced the dlls the caused bold fonts issue, also related to caller Id, but still have problem with calling, i am using phone canvas ver 4.0 for qvga, a lot of times when pressing the call button it takes sometime to activate the phone canvas, and sometimes the disconnect button not work, pls advise me what i should do!!
thx..
any help??
Related
May I ask a very stupid question? How to answer an incoming call?
Problem: when I got a new call, the mobile keeps reminding me as normal but neither the answer botton nor the menu could pick the call up!
I swear the botton and menu function well and it has no other obvious faluty!
Actually I have similar? Was putting it down to sliding it out of the case causing the hng up button to be pressed.
Yeah, I also have a similar problem,
mostly the close to end and the end key itself doesn't work, i always have to press the en button on the screen.
This also happens to the answer button sometimes:S:S
I got this problem when i flashed from the Swedish rom to the Niki Project V1 ROM. Flashing back to the HTC WWE Asia rom fixed the problem. I use WWE HTC Asia because its available with the new touch.dll as it seems like Niki Project V2 doesnt have it cooked in. But Niki Project V2 doesnt seem to hang on calls, its just slower when you touch the screen.
Now I worked out a very complicated way to answer the call:
1 slide it out, to open the phone menu
2 touch the keypad
3 press green answer botten
It's the only way I could answer my call! So great! Thank you fu**ing design!
Whenever i dial a number on my htc touch and press the green button to make the call than it automatically dial other number which i have previously dialled, it keeps doing that many times. Plz help me solving this issue
I think its a software bug... Its really annoying if someone calls me and I cant accept the call My ringtone just keeps ringing and I just can stupidly look on the screen without answering :S I push the green "answer" button but the call doesnt accept. I neither can use the red "ignore" button. This problem gets solved with a reset but happends again after a short time.
Is there any solution for this´? Is there any possibility to accept the call trough the touchscreen?
Please help me I am really desperate!!!
Thanks in advanche.
Uhhmm.....i guess you know that you have to 'slide' the button to the green field if you wanna answer...not 'push' the green spot.
Anyways...you can also use the (physical) buttons of the phone to answer or disconnect.
I think you missunderstood me. I actually mean the physical buttons! They arent working anykind. Normally if I press the green "dial/answer" button the dialer application appears right? But it dont! After software resetting it does again somehow for short time. And if I get a call then I press the physical button but the call doesnt accept. It just keeps ringing further. There is no chance to accept the call. And there is no option to accept the call trough the touchscreen.
Indeed, i misunderstood..sorry!!
If the buttons didn't work at all, i would be thinking of a hardware problem, but since you can solve it for a short while with a soft reset.....i'm not so sure of that.
You still have the option of a hard reset, you could give it a shot, just to be sure(Remember to back up your stuff ).
Otherwise send it in for warranty...presuming you still have it.
Thanks for the reply!
I dont think its a hardware problem because the buttons are working again somehow after a software reset. But the problem happens again some time later
Sending it to warranty is no choice since I always got trouble with my warranty!
My old touch had an software problem and couldnt boot so i send it to the warranty and they just send it me back with no repairs claiming that the warranty gets lost if I connect my device with a computer :S
Anyway i hope there is a solution without hardware resetting
Just a thought....
Did you install any locking software which locks the device fully? It may be the one preventing you from answering calls...
HTH...
No I didnt install anything kinda like that. Is there a dialer replacement I could use instead?
I have also noticed this bug on my Jade running the official 2.32 update from HTC:
When a cal is received, the phone rings but it doesn't display who is calling (the device keeps showing the home screen). This is not happening at every call, but I can't find what is causing this behaviour (it happens even after hard reset, so no additional programs running in the background).
Any ideas how to overcome this?
Hi!
I've experienced this problem on a variety of Manila ROMs (Rafyvitto, Arto, UFE).
(I don't know if it's an issue with non-Manila ROMs as I haven't tried them)
(Since it's not related to a specific ROM, I'm posting here than in the particular ROM threads)
When I press the call button, it almost always starts redialling the last number.
What I would like it to do (and what I think should be the default) is to go the phone screen (same as pressing phone softbutton on Manila Home) - and give you an option to dial a number...
Does anyone else have this trigger happy call button?
Any suggestion for fixes?
Thanks
/Sifaan
it's a known problem with the htc phone canvas in our device.
You can use ae button plus and assign the call button to take you to the phone screen. It works fine like that
kostaskodes said:
it's a known problem with the htc phone canvas in our device.
You can use ae button plus and assign the call button to take you to the phone screen. It works fine like that
Click to expand...
Click to collapse
Thanks for the tip. Works perfect now!
Conflicts with bluetooth headset
sifaan said:
Thanks for the tip. Works perfect now!
Click to expand...
Click to collapse
Seems like I was a bit hasty here... it works fine with the keyboard, but the remapping also affects my bluetooth headset - with this setting, I can't answer a call by pressing the button on my bluetooth headset (because it is interpreted to run phone app rather than answer the call).
I mainly use bluetooth headset when driving, so it kind of defeats the point if I have to pick up the phone to answer the call...
any ideas... please....??
/Sifaan
my dial pad is missing when calling someone. screen flashes and the call screen is lost. but the call is normal.
a few times phone opened automaticly coming call. I checked all call settings, there is no anormal setting, please help.
I tried all versions rom. 2.1, 2.2, omg, chayogen etc. now I'm using 2.1 update, kernel leshak 2.6.29, lk2.08.1 samdroid
I have the same problem!
I have the same problem. It started about 3 days ago for no reason. When you press the call button after entering a number, the screen goes black and all the three buttons at base (back, windows and search) are not responsive. There is nothing you can do...you can't hangup or enter numbers until the other party hangs up, unless you reboot. (You can still talk and make the call as normal).
I tried rebooting, took battery out and also did a factory reset but nothing has resolved the problem.
However, I did find a workaround: flip phone over so it goes into speaker mode and then the dialpad becomes visible and you can end the call or use number pad, but you have to keep phone flipped over all the while. Another workaround is to use a Bluetooth headset when making or answering calls. Then the dialpad is always visible as normal.
If anyone knows what to do please respond!
there is no hope (from xda)
I decided to go service...(its doesnt matter I tried al versions rom, I hate this phone, enough, I tired to reload rom vs.)