Related
I think this FM Radio is improved as far as reception concerned. Less interference noticed overall. Back up the current library (just in case you don't like this one) from the Windows directory and replace it with the files in the zip.
Where does it come from ?
plopplop said:
Where does it come from ?
Click to expand...
Click to collapse
From udk's latest ROM
Is there a possibilitie to change the fm radio with a working wm6.1 rom already flashed because when i try to copy the files over the files on my device i get a error that i cant override them.
Ajacied410 said:
Is there a possibilitie to change the fm radio with a working wm6.1 rom already flashed because when i try to copy the files over the files on my device i get a error that i cant override them.
Click to expand...
Click to collapse
use total commander or resco explorer. Either will over-write the libraries.
It would be great to make a cab file out of it. Could anybody help with it?
mffu said:
use total commander or resco explorer. Either will over-write the libraries.
It would be great to make a cab file out of it. Could anybody help with it?
Click to expand...
Click to collapse
That depends - what are all the needed Registry entries ? It's simple enough to have all the files in the zip CAB'd to install in \Windows, but are there Registry entries needed beyond these ?
i tried it yesterday.Copy all files in Windows folder with resco,check version and see version number is ok.I listened to radio all night and havent a problem
ianl8888 said:
That depends - what are all the needed Registry entries ? It's simple enough to have all the files in the zip CAB'd to install in \Windows, but are there Registry entries needed beyond these ?
Click to expand...
Click to collapse
This library is complete. You can unzip it to the storage card, tap on the FM Radio.exe and it will work. I believe we need a cab maker. That type of program writes everything into the registry during the installation.
Thanks. I will try this one tonight ... ;-)
mffu said:
I believe we need a cab maker.
Click to expand...
Click to collapse
Here you go.
Tested. Works.
Sascha
The PDAViet rom also has version 1211.721 which also has better reception than the one on the stock rom. Now I can use my favourite headset which had poor reception, maybe due to shorter length than some crappy one I had
SaBo said:
Here you go.
Tested. Works.
Sascha
Click to expand...
Click to collapse
Doesn't work on my Cruise. Stock ROM. The App doesn't want to start.
Neither the cab not the zip works. I thought that my sprite backup would have the original Files from the rom,it does not. Does anyone have the stock radio files to get my radio working again?
TIA!
EDIT: It looks like I have lost the ability to launch the radio app. At this point, I really don't want to do a hard reset. Don't apply this update unless you are willing to lose this function.
victoradjei said:
The PDAViet rom also has version 1211.721 which also has better reception than the one on the stock rom. Now I can use my favourite headset which had poor reception, maybe due to shorter length than some crappy one I had
Click to expand...
Click to collapse
this is the default version that i have on my HTC Polaris/Cruise.
I'd like to backup my files before copying the new one but can't copy fms_api.dll, even using Resco explorer...
Doesn't work on my Cruise. Raramomo ROM. The App doesn't want to start.
Has somebody a cab of the original radio ?
LIPA said:
Doesn't work on my Cruise. Raramomo ROM. The App doesn't want to start.
Click to expand...
Click to collapse
What application doesn't start?
The CAB can only be installed if you turn certification off.
I don't know if this is possible with all stock ROMs.
Sascha
SaBo said:
What application doesn't start?
The CAB can only be installed if you turn certification off.
I don't know if this is possible with all stock ROMs.
Sascha
Click to expand...
Click to collapse
The FMRadio.exe does not start. The cab was installed properly without issue.
mffu said:
That type of program writes everything into the registry during the installation.
Click to expand...
Click to collapse
Yes, I know that - it was the point of my post.
But what I asked is: "Are there any other Registry entries that need updating ?"
The answer seems to be - apparently not, since another post reported it as working by just copying the unzipped files into \Windows ... but other posts reported this as not working.
Generating a CAB is easy of course, making sure it actually works may be harder.
E.Bonobox said:
this is the default version that i have on my HTC Polaris/Cruise.
Click to expand...
Click to collapse
The FM Radio I posted is better than the PDAViet's one. I have less interference or static after I upgraded to it. I am on PDAViets's 06 build and I get a clear and crisp signal off the stations I had the crappy static with the original build.
And YES, you got to have the security policies changed in order to overwrite some files in the Windows directory. Search for the SDA Application unlocker. That should fix the problem with upgrading.
In my first post I mentioned about backing up the original files. If you happened to fail doing so, try to find Dutty's FM Radio cab.
Thank you!
WOW SRS HD
I was playing with all versions for some time to get a decent working version on my diamond with Rom version 203.401.20wwe.
And after 3 times a hardreset i found a combination that workt perfect.
New Version V2.0 Tested on Dazzza.2.7.1_Final.V1E Rom with a Nokia BH-604 Bluetooth Stereo Headphone (the best bluetooth headphone i ever tested ) this version stays on headphones modus by default and you don't have to go in the settings every time after connecting your Bluetooth headphone
Be carefull install at your own risk ....
Gives "there is no wow hd driver loaded...." error - did soft reset.. Do I need to change registry as stated in other threads??
Just use the attached .reg file. Rename the file to .reg. Transfer it to your PPC and use the File Explorer to import it into the PPC registry.
theintelligent said:
Just use the attached .reg file. Rename the file to .reg. Transfer it to your PPC and use the File Explorer to import it into the PPC registry.
Click to expand...
Click to collapse
How do i import? I click on it and it won't. PHM regeditor also won't import.
Roflnova said:
How do i import? I click on it and it won't. PHM regeditor also won't import.
Click to expand...
Click to collapse
i made a cab with the hd driver and put it first post
try that and softreset
whiskeybro said:
i made a cab with the hd driver and put it first post
try that and softreset
Click to expand...
Click to collapse
still doesn't work.
Roflnova said:
still doesn't work.
Click to expand...
Click to collapse
try this
unpack the panel.cpl and put in windows
Still Doesn't Work
Is the Registery Setting true?
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\SRS\WOWXT\WaveDev]
"InputGain"=dword:00000002
"OutputGain"=dword:00000000
ycimpir said:
Is the Registery Setting true?
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\SRS\WOWXT\WaveDev]
"InputGain"=dword:00000002
"OutputGain"=dword:00000000
Click to expand...
Click to collapse
I had to create the entire registry key and still didn't work. Installed WOW SRS HD, Installed HD driver, manally entered registry entries....nothing
Audio Booster & WOW HD
whiskeybro said:
WOW SRS HD
I was playing with all versions for some time to get a decent working version on my diamond with Rom version 203.401.20wwe.
And after 3 times a hardreset i found a combination that workt perfect.
Be carefull install at your own risk ....
Click to expand...
Click to collapse
Does this also permit Audio booster on TF3D Music player, to run along ??????
matmaneyre said:
I had to create the entire registry key and still didn't work. Installed WOW SRS HD, Installed HD driver, manally entered registry entries....nothing
Click to expand...
Click to collapse
strange and i dont have an input and output level in my registery
i can give you the older one that workt with my older roms
first instal the cab and then copy the WOWHD panel.cpl in windows.
a New Version in first post V2.0 for Diamond 6.1 Rom and i tested it on Dazzza.2.7.1_Final.V1E Rom with a Nokia BH-604 Bluetooth Stereo Headphone
and it's working great
Where, it says 1.2.1 xxx and not 2.0 ...
Ulyan said:
Where, it says 1.2.1 xxx and not 2.0 ...
Click to expand...
Click to collapse
1.2.1 V2.0 is version 1.2.1 with changed reg settings
Hi there, have installed Diamond_WOW_SRS_HD.cab, got the no WOW HD driver found message, so installed the HD Driver.cab, still the same. Then copied the panel.cpl file to Windows, still same message. Any ideas?
runebinder said:
Hi there, have installed Diamond_WOW_SRS_HD.cab, got the no WOW HD driver found message, so installed the HD Driver.cab, still the same. Then copied the panel.cpl file to Windows, still same message. Any ideas?
Click to expand...
Click to collapse
after installation you need to softreset
whiskeybro said:
after installation you need to softreset
Click to expand...
Click to collapse
Did a soft reset between each of those steps, still not working
I have made a CAB with the new Topaz comm manager and its applets.
http://rapidshare.com/files/219499651/Topaz_Comm_Manager.cab
Sometimes in the first install it requires to turn Wifi on and off from setting to get it grayed out.
can you made a version for QVGA thanks mod
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Update: You were right - SDKCerts must be installed first. Thanks again. Posted it here as well http://www.fuzemobility.com/touch-pro-2-communications-manager-ported/
bugsykoosh said:
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Click to expand...
Click to collapse
+1 to this error. About halfway through the install (bars are at about 50%)
it gives me the ''does not have sufficient system permissions'' error.
Running a CDMA 21042 Diamond ROM.
Can this file be posted elsewhere? TQ
I can mirror if i can get a copy on 4shared site.
TQ
bugsykoosh said:
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Click to expand...
Click to collapse
NO it worked on 20000, in fact i am using it. Have you installed sdkcerts?
Greeat job wow its bad ass good find an thanx for this cab!!! little goodies are always fun lol
Please
Someone please port for QVGA.
Paul
Does it work on WVGA (Touch HD Blackstone with stock English ROM build 20757)?
nwradu said:
Does it work on WVGA (Touch HD Blackstone with stock English ROM build 20757)?
Click to expand...
Click to collapse
I second that ! I got a french cooked rom, a great rom, but I miss really the new comm manager.
Works on WVGA!
I'm using it on my german Xperia X1
Chris
this one works. the problem is the dlls arent signed.
http://forum.ppcgeeks.com/showthread.php?t=64195
I am running NATF 4.5's, it installs but i can't get the advanced settings for wifi or phone, only the advanced options for bluetooth works. Tapping the center, or the far left side doesn't do anything for me on those two options.
It works well, thank you.
Well, I have the sdkcerts.cab installed (I had to for XboxMod's Rhodium), but I still get the error during installation that have insufficient permissions.
I tried installing sdkcerts again, but it quickly returns stating it was successfully installed on my device. The new Comm Mgr cab still refuses to install.
I am running with the AT&T leaked test ROM if that makes a difference.
ap4lifetn said:
I am running NATF 4.5's, it installs but i can't get the advanced settings for wifi or phone, only the advanced options for bluetooth works. Tapping the center, or the far left side doesn't do anything for me on those two options.
Click to expand...
Click to collapse
Same happens to me on my NATF 4.3's.
imreolajos said:
Well, I have the sdkcerts.cab installed (I had to for XboxMod's Rhodium), but I still get the error during installation that have insufficient permissions.
I tried installing sdkcerts again, but it quickly returns stating it was successfully installed on my device. The new Comm Mgr cab still refuses to install.
I am running with the AT&T leaked test ROM if that makes a difference.
Click to expand...
Click to collapse
OK, it it is not a cooked ROM you have to run the patch that allows to run unsigned software.
What patch?
caldito said:
OK, it it is not a cooked ROM you have to run the patch that allows to run unsigned software.
Click to expand...
Click to collapse
if i install this, will it be in english, or will it be in the language of my rom and manila? my phone is in russian, will this new comm manager have the proper mui files??
thanks
Secondary pages not showing
I installed the package on my stock rom AT&T Fuze. The main function works great. I was even able to use the Advanced Configuration utility to add the selectable 3G item. However, the only secondary page that works for me is the Blutooth page. All others just light up the item for a moment then shut it off---no secondary page displayed. Has anyone else had this issue?
Pals,
I had 2 questions :
1- I built a rom, but its always stucked after pressing skip button on password screen when 1st run, any one know which package cause this problem!!
2- How i can change the OS number in boot loader screen!
3- how i can get today plugin work!!
4- what packages needed in order to let Camera work?
Thx
1- I don't know, post your build_log.txt from the root of the kitchen so I can see what packages you have enabled.
2- I don't know, I don't think our devices support changing that.
3- If your installing Manila it enables itself by default. If your trying to change the default I believe one of the tutorials here could help you.
XirXes said:
1- I don't know, post your build_log.txt from the root of the kitchen so I can see what packages you have enabled.
2- I don't know, I don't think our devices support changing that.
3- If your installing Manila it enables itself by default. If your trying to change the default I believe one of the tutorials here could help you.
Click to expand...
Click to collapse
[/QUOTE]
ok pal, when i generate dsm files? if i add new package??
http://rapidshare.com/files/292135866/Build_log.zip.html
anybody can upload new remapped phone canvas to me?? thx...
mua30 said:
Pals,
I had 2 questions :
1- I built a rom, but its always stucked after pressing skip button on password screen when 1st run, any one know which package cause this problem!!
2- How i can change the OS number in boot loader screen!
3- how i can get today plugin work!!
4- what packages needed in order to let Camera work?
Thx
Click to expand...
Click to collapse
1. we talk about WM 6.5 OK,
A. Disable auto setup, auto setup only compatible with wm 6.1
B. Connection setup in Official OPAL and other HTC device always crash with ADC, so choose ADC or Conection setup only.
2. You don't need to change it, Why do you want to change it?
3. What kind of today plugin? M2D? or default WM 6.5 titanium plugin?
4. camera driver and camera application, usually camera driver is in the OEM, and camera app in the separate folder inside EXT
BesFen said:
1. we talk about WM 6.5 OK,
A. Disable auto setup, auto setup only compatible with wm 6.1
B. Connection setup in Official OPAL and other HTC device always crash with ADC, so choose ADC or Conection setup only.
2. You don't need to change it, Why do you want to change it?
3. What kind of today plugin? M2D? or default WM 6.5 titanium plugin?
4. camera driver and camera application, usually camera driver is in the OEM, and camera app in the separate folder inside EXT
Click to expand...
Click to collapse
Thx Besfen, another question, do u have remapped phone canvas in order to fill the screen correctly without appearing of scroll bar when dialing!!
mua30 said:
Thx Besfen, another question, do u have remapped phone canvas in order to fill the screen correctly without appearing of scroll bar when dialing!!
Click to expand...
Click to collapse
Cook in this package and it should fix it. It worked for me with Mega's phonecanvas which I recommend as it works correctly with 6.5. I don't know if it will work with older ones but you can give it a try.
XirXes said:
Cook in this package and it should fix it. It worked for me with Mega's phonecanvas which I recommend as it works correctly with 6.5. I don't know if it will work with older ones but you can give it a try.
Click to expand...
Click to collapse
Just import it or replace its contents with phone canvas!!!
mua30 said:
Just import it or replace its contents with phone canvas!!!
Click to expand...
Click to collapse
Its funny what is going on, after flashing the today in control panel is working, after turining off the mobile and turning on its not!!!
i am doing HD 2 times, hope its work!
Any advise!!
I have made a rom using new ervious visual bepe's kitchen.
i dumped two stock roms
1:- 1.66 stock
2:- 1.72 t-mobile stock
i simply replaced some folders from 1.66 stock into 1.72 stock which were operator package and operater pt.
and i converted a manila document tab from cab into EXT and copied into the dumped EXT. whose Path is like this ( C:/ dump/ext/leo/21869/Leo_external_packages)
and then i opened the kitchen and clicked on Button " REAL WM 6.5 AKU and changed its pagepool to 18mb and and changed the value of modules to 1000 in other options.
clicked on create rom and rom created succesfully without any error..
I flashed the rom into my hd2. it completed with no error and i performed several times hard reset also.
Now when i am trying to start the hd2 it stucks on welcome screen setup. no hardware buttons working.
what i have done wrong????
what mistake i made in between making the rom???
Kindly help..!!!!!!!!!!!!!!
no one have the answer for this problem?????????
c'mon friends.. help me out...
By 1.72 Tmobile ROM I assume a NON USA Tmobile ROM. If that's the case then it should work fine.. however if you cooked up a Tmobile US ROM, your phone will not boot unless you also flash a TMO US radio. Try a different radio and see if your ROM boots.
mon_money said:
I have made a rom using new ervious visual bepe's kitchen.
i dumped two stock roms
1:- 1.66 stock
2:- 1.72 t-mobile stock
i simply replaced some folders from 1.66 stock into 1.72 stock which were operator package and operater pt.
and i converted a manila document tab from cab into EXT and copied into the dumped EXT. whose Path is like this ( C:/ dump/ext/leo/21869/Leo_external_packages)
and then i opened the kitchen and clicked on Button " REAL WM 6.5 AKU and changed its pagepool to 18mb and and changed the value of modules to 1000 in other options.
clicked on create rom and rom created succesfully without any error..
I flashed the rom into my hd2. it completed with no error and i performed several times hard reset also.
Now when i am trying to start the hd2 it stucks on welcome screen setup. no hardware buttons working.
what i have done wrong????
what mistake i made in between making the rom???
Kindly help..!!!!!!!!!!!!!!
Click to expand...
Click to collapse
i think he means the european tmobile uk rom..
this is a common problem..:
you have to change ntconfig.dll (from notification enhancement) from module to file.
HD2Owner said:
i think he means the european tmobile uk rom..
this is a common problem..:
you have to change ntconfig.dll (from notification enhancement) from module to file.
Click to expand...
Click to collapse
Ah! Didn't think of that... He wasnt really clear what the "welcome" screen means, I assumed that would have been the initial splash screen.
But if the ROM boots past the 'red letters" then yeah, recmodding the notification manager DLLs will fix that
HD2Owner said:
i think he means the european tmobile uk rom..
this is a common problem..:
you have to change ntconfig.dll (from notification enhancement) from module to file.
Click to expand...
Click to collapse
first of all thanks for your help..
HOw can i change the ntconfig.dll module into a file???????
rom which i am using is a branded rom from t mobile uk.. and have mix some content of generic 1.66 rom with this t mobile rom which i already mentioned above..
NRGZ28 said:
Ah! Didn't think of that... He wasnt really clear what the "welcome" screen means, I assumed that would have been the initial splash screen.
But if the ROM boots past the 'red letters" then yeah, recmodding the notification manager DLLs will fix that
Click to expand...
Click to collapse
thank you nrgz for your help..
kindly tell me how to do that??? how can i fix notification .dll modules??
Look for an exe called recmod.exe or reversemode.exe. For now. to see if this is your problem just exclude the notification manager form you rom