hey guys!
I flash the JP2orJPC, the proximity sensor does not work, initially thought it was caused by software, but I restored the factory settings, the problem still exists, but I flash back to JH1, close to the sensor on the restoration to normal
I don't understand... once you flashed back to jh1, the problem has been solved?...
i've the same issue on jpc, just being careful lol. works fine on older fw
Then a different subject should be suggested... i.e "after upgrading to JPC, my proximity sensor has stopped working".
Beta froyo. Enough said
Sent from my GT-I9000 using Tapatalk
Related
So, i got the 4.3 OTA update done yesterday. It run smoothly but the motion sensors are not giving any info anymore !
My config is : Nexus 7 3g - Stock Rom - Rooted
I checked the sensors with different apps, they seems to be recognized by the system but nothing coming out of it.
No more accelerometer ,giro or magnetic sensor.
The other sensors work fine (light,GPS) as all other parts of the system (as far i know)
Any one facing the same issue ?? and more important ... does anyone have a solution?
Should I rollback to 4.2?
Thanks !
Coucouyango said:
So, i got the 4.3 OTA update done yesterday. It run smoothly but the motion sensors are not giving any info anymore !
My config is : Nexus 7 3g - Stock Rom - Rooted
I checked the sensors with different apps, they seems to be recognized by the system but nothing coming out of it.
No more accelerometer ,giro or magnetic sensor.
The other sensors work fine (light,GPS) as all other parts of the system (as far i know)
Any one facing the same issue ?? and more important ... does anyone have a solution?
Should I rollback to 4.2?
Thanks !
Click to expand...
Click to collapse
How about a factory reset?
Sent from my LG-P920 using xda app-developers app
Rotation issues .i am so confused.i flashed paranoid android and kk modem.went back to stock now my accelometor seems to be not working.im not sure if its that or the gyrosscope.ive done. Gyroscope test and it seems fine.but my screen wont rotate at all.would a different kernel help.i flashed back to stock.
jra89027 said:
Rotation issues .i am so confused.i flashed paranoid android and kk modem.went back to stock now my accelometor seems to be not working.im not sure if its that or the gyrosscope.ive done. Gyroscope test and it seems fine.but my screen wont rotate at all.would a different kernel help.i flashed back to stock.
Click to expand...
Click to collapse
I only got a lag from the rotation. The screen is like to be rotated 3-5 seconds after I rotate it.
Recently i have got a proximity sensor broken nexus 4 and i tried to update it to kitkat and i was failed. Also tried with a custom rom but failed again. can someone please acknowledge me how to update proximity sensor broken nexus 4 to kitkat?. Does not matter whether the rom is stock or not.
Did it stop working all of a sudden? Was it working before?
If it stopped working all together the sensor itself is broken and no update or rom will make it work.
If it didn't work at all. No ROM or update will make it work.
jayRokk said:
Did it stop working all of a sudden? Was it working before?
If it stopped working all together the sensor itself is broken and no update or rom will make it work.
If it didn't work at all. No ROM or update will make it work.
Click to expand...
Click to collapse
I guess what OP wanted to say was that he wants a ROM to upgrade his N4 to Kit Kat.
Yeap thats true i need to update my phone to latest android version dont care much about the proximity sensor.
Sent from my Nexus 4 using XDA Free mobile app
i am having this issue with receiving and making calls, the moment the screen is on, SystemUI will crash and reload.
The proximity sensor does not work after this, and i end up touching stuff with my cheek while talking.
I do have my doubts on xpose module S5 SystemUI Theme, but it all started randomly...
anyone having the same issue?
My Note 3 runs with Stock NG2, LeanKernel 3.6 and latest PhilZ CWM.
Yes! I have this issue as well. Not for outbound, but only for inbound. I use the Samsung flip cover, so I did not notice about the proximity sensor, but I just gave it a test and it shows identical behaviour. When receiving a call when screen is off, there is no problem at all, proximity also works.
I do not have the S5 SystemUI theme, and never used it.
Can't remember what I changed that could actually cause this. I have the following config:
Stock XXUEND3 (Latest PHN - The Netherlands firmware available)
Rooted with CF Autoroot
Running Ultimate Kernel v54 (but I had the issue already running stock kernel)
Connected with Gear 2
Frozen some Samsung bloatware with Titanium Backup
So I am following this thread!
Gerco
Well that's weird, Greenify keeps telling me it has problems hibernating com.sec.android.sviewcover, which i've disabled since i dont have one.
PS, to confirm your findings, i too had problems on stock kernel (*NG2 SEE) and i did wipe a lot of APK's, but most of them are non-samsung, i prefer RW rights over /system above scripting and debloating apps.
Do you by any chance have Xposed installed? if yes, what modules?
I've enabled the physical buttons for picking up and ending a call, if it wasnt up to them, i'd have to wait until the process re-opens so i can slide the thing...this is getting really annoying
I do have the Xposed framework loaded, with only Wanam Xposed active. I'll try to disable/remove Xposed and see if that makes things better.
<edit> Nope... Did not fix it... </edit>
Solved? I've this problem also with Galaxy S4 (I9505), i've disable Xposed, clean systemUI data, flash a stock rom (without wipe data)... still crash.
Had to wipe everything as i remember. The issue never came back.
PlutoDelic said:
Had to wipe everything as i remember. The issue never came back.
Click to expand...
Click to collapse
Thanks
Inviato dal mio GT-I9505 utilizzando Tapatalk
For me it worked again after I flashed a ROM update that became available for my region.
Sent from my SM-N9005 using XDA Free mobile app
Hi, I got a problem with fingerprint sensor since buying my phone (it was bought as used). Seller did a hard reset before selling phone claiming that fingerprint sensor was fully working. I was trying to add my fingerprint. Sometimes it worked, sometimes I saw error saying that my fingerprint sensor is not working and I should reboot my phone to fix that - of course it didn't help. Hardware test (*#06*#) sometimes showed proper version of the sensor, sometimes 0.0.0.0.
So I tested few custom roms, but it didn't fixed my problem. It actually made it worse. Before testing custom roms I was able to find 'fingerprint' app/service in all apps. I couldn't find it on custom roms so I came back to newest stock, installed all updates and updated all apps and still I can't find this app/service/whatever it is.
Is there any way to get this back or something?
If you used aosp based custom roms then they wouldn't have had the fingerprint service.
What rom should I get to make this work?
kapq said:
What rom should I get to make this work?
Click to expand...
Click to collapse
Anything touchwiz, so stock.
Sent from my Tw5ted SM-G900A using Tapatalk
Is 5.0 G900FXXU1BOE5 stock? I got this one currently but I still can't find 'fingerprint' in all apps.
kapq said:
Is 5.0 G900FXXU1BOE5 stock? I got this one currently but I still can't find 'fingerprint' in all apps.
Click to expand...
Click to collapse
Sounds like it, try doing a full reflash.
Sent from my Tw5ted SM-G900A using Tapatalk
Full reflash is wiping data in recovery then flashing ROM with odin? I did it and still nothing.
EDIT: Ok I got it now in all apps. However hwtest says fingerprint's version is 0.0.0.0 and I can't add my fingerprint in settings. Any advice?