[Q] new mic and volume buttons? - myTouch 3G, Magic General

hi guys, i have a mt3g which runs fine, apart form the mic has gone muffled (sounds like im talking through a cloth) and the physical volume control buttons are pretty much broken.
i heard the mic problem was a rom problem, so i flashed a million different roms but no luck
the volume buttons arent such a problem right now as yet have been replaced by an app, but the mic is what really needs repairing/replacing.
ive been looking all over the net for replacement parts but i have had no luck.
anyone recommend anywhere, where i can get these particular parts?
thanks!

anyone??????

Related

Incall volume problem

Hi guys,
I've been having alot of problems regarding my Hermes incall volume - it's whisper quiet. It doesn't seem to be the ROM (i've tried 3 now, the official WM5 and 2 WM6) nor the radio (i've tried 1.40 and 1.43)
I've also had a look on the forums to no avail, any fix seems to not apply to my system.
I know it's cheeky to start a new thread, but if I can't find a resolution I think I'll just sell it on the bay.
Cheers
p.s - I have ensured that it is to the fullest using both the scroller and the speaker during a call. The rest of the volume on the phone is fine, loudspeaker and ringing etc.
Ringing volume comes through your speaker in the back, and so does the speaker phone option. Your head piece might be going bad, that might be the reason why you dont hear it loud.
If the phone is still in warranty, then send it to be replaced!

How to increase the microphone input volume?

Hello all, I recently went to skin my Touch HD, that is basically applying a layer of clear protective skin on my Touch HD, the problem is after skinning, I realized that my microphone is blocked somehow by the skin, making audio input very low, and the person I am talking to can't hear me well over a phone conversation.
I do not want to remove the skin, hence i am asking is there a way to increase the microphone input volume? Thanks.
Did you managed to get a response on this?
I did not skin my HD but quite a number of my friends are having difficulties to hear me... The volumn is too soft.
Can anyone help? Thank you very much in advance. Cheers...
I also had a problem with the microphone volume being too low.
I returned it to the store where I bought it for they to fix it.
When I got i back, they had put in a new mainboard and the problem was solved. So it was a hardware issue in my case.

Motherboard or Volume slider problem???

I have the past months problem with the external speakers.
No sound at all, only when I twist or press the part of the motherboard where the Volume slider is located, I might have a sound for a while, but nothing permanent.
I have already applied the phone jack hack but no success for me.
It seems like the Volume slider or a connection from the motherboard is chipped.
Any ideas? Has anyone came up with this type of problem?

Problem with microphone volume when calling

Hi,
Since my Hermes fell off the table people keep complaining that they have problems hearing my voice while talking on the phone. They say the volume of my voice is too low. When using a headset everything's fine.
I've never had a problem like that, nevertheless I dismantled the Hermes to see if there was anything wrong with the microphone after the fall, but it seemed ok.
I also recorded my own voice using the voice recorder in WM6 to test the microphone and strangely enough my voice sounds pretty loud and clear to me.
After some googling I found that many people seem to have a problem with their voice barely being heard by other people on the phone.
Solutions I could not find and I do not understand why that problem has occurred after the Hermes fell down, as it seems to be software-related (otherwise my mic-test would have resulted in a low-volume recording, which it did not).
Has anyone here had that problem and found a solution?
Well, I've solved the problem, although not by the means I originally wanted to. I just did a recovery of a Backup from before the day the Hermes fell down and voila - everything works again as it should (although I still don't get it how the phone falling down can change the SOFTWARE, but hey, as long as it works).
Again we see the importance of regular backups.
I had this problem before. tried to fix it but didn't work. Flashed all sorts of roms, all didn't work. Even newly flashed roms still had this problem.
Headset is fine
but just speaking into the mic isn't.
Same as you, recording works fine too, but mic to phone just doesn't work. I am curious how did you dissasemble your phone though, do you have a manual or something?
I had this problem before. tried to fix it but didn't work. Flashed all sorts of roms, all didn't work. Even newly flashed roms still had this problem.
Headset is fine
but just speaking into the mic isn't.
Same as you, recording works fine too, but mic to phone just doesn't work. I am curious how did you dissasemble your phone though, do you have a manual or something?
Hi again,
Well, the problem's back again. Even after resetting the Hermes at first it worked fine, but later people complained again that my voice was too low. So it seems that the problem is first solved by resetting/backup recovery, but then reappears. Don't know how that is possible, but I fear that it is indeed hardware-related.
Has anyone any suggestions as to what I can do?
Am I right in assuming that the hole next to the one for resetting the phone is for the microphone? Because when I dismantled my Hermes the corresponding part did not look like a microphone at all. Here's a picture of what I am talking about:
Is the part where the black rubber-thingy (circled below) that easily falls off when dismantling is placed over the microphone?
As for the dismanteling, go there:
http://www.mikechannon.net/page1.html
and search for "Hermes", there are some nice guides there.
I appreciate any hints that could lead to me solving this problem.
Update:
I've been searching for corresponding Registry Entries and so far have found these:
HKEY_CURRENT_USER/Control Panel/Phone
Changing "Vol" to 65535 increased the mic volume a little bit, but it was still too low for being acceptable (I have been testing the volume by placing my Hermes next to my PC speaker while playing an audiobook at a normal volume and calling my landline as to see how it sounds).
See also here for the thread where I found this info.
I also found these two threads:
http://forum.xda-developers.com/archive/index.php/t-260171.html
http://forum.xda-developers.com/archive/index.php/t-256734.html
My Values at HKEY_LOCAL_MACHINE\SOFTWARE\HTC\AUDIOGAINx were originally at 18 and 19. I changed them first to AA and this did, or so it seemed, increase the volume more notably. Changing the Values to CC however changed little compared to AA (although this should make the mic even louder). I may be mistaken, but I even think that the quality was better with AA.
I am not familiar with the actual volume of the mic at the receiver's end, but in my opinion the volume was pretty ok. I will call a few of the people who have been complaining and see what they have to say about the volume.
Update:
I just called my brother and he said my voice was as low as before, so my modifications had no effect.
Next thing I will try is to totally disassemble my Hermes and put it back together so to check every connection that might have gone loose.
Update: Dismantled it totally (except for the screen part) - didn't help either.
Seems like there is no solution to this problem. Most likely I will have to get a replacement. This sucks.
HI
Exactly the same problem here.
(No phone audio but Note recording & Headset works fine)
Only the phone was not dropped. Just happened !
Did a reset but did'nt wok either !
Phones in great condition.
Like you though it was a Software Issue
How much was a new mic ?
Can it be economically soldered on ?
Is there no solution whatsoever ?
Please keep me updated
Many Thanks
Sampler100
Hi Sampler,
In the end I found no solution to my problem. Got myself a Vario III and am using that one ever since.
Please let me know if you find anything that can solve this.
Greets,
Cartman
Some of these problems (I don't say all) may be caused by damage to the mini USB port and the fine wires inside it. The port has wiring related to sound both earpiece and Mic. As you know connecting a handsfree headset cuts off the Mic and earpiece, so you can see that damage to the port or bend pins inside it can cause Mic problems. This may be why sound recording is fine, but in phone mode the Mic is cut off.
I say this only to avoid the assumption that the Mic is damaged (it may be), but it can also be the port and associated wiring that causes the problem. If you are dismantling check the solder contacts around the USB port for cracks and also for bent pins in the socket.
Mike

[Q] What's going on with my in call sound?

Hi,
I have unusual problem with my motorola defy earpiece (or at least i think it's that). Bought it used, so don't know how it was before...
During calls the volume of earpiece speaker is very low, practically unusable unless you are using phone in completely silent environment. The weird thing is tho, when i turn the phone around and listen closely on the back side the volume is actually a bit higher - seems like in call sound is coming from big phone speaker on the back, just very silenty... When turned to loudspeaker mode during call - everything works as intended, i can hear loud voice on phone's back speaker. I know that people are having problems with defy's earpiece not working at all, but it's not like that for me. It actually seems that both speakers (earpiece and main speaker) are working during calls just on very low volume. No luck searching for help on internet, doesn't seem that anyone had this happen... Problem egsisted with stock ROM, so i installed CM 7.2 - nothing changed. Volume buttons work, but even max volume is just too low. Wonder if that could be software problem or the hardware is somehow ruined? Any ideas? Don't know where to turn - i'm intending to take phone apart and see what's going on in there, no previous experience so please stop me
I just got my defy today and have exactly the same problem. I flashed cm 7.2

Categories

Resources