Database Users

[GUIDE] Gain root access HTC Hero TMobile

I have finally managed to root my phone. after trying for a rather long time, i did it yesterday and am running modaco custom ROM which is superb. I have listed the instructions I followed in case anyone else is having the same issues as i had
(unable to backup via amon RA image - backup failed)
Text in Bold indicates something you need to type
(Instructions taken from various sites - for XP only - Credits to Unlocker & Modaco)
If your current build number is 2.73.405.5 you can skip the Goldcard section
Phone Details:
Model Number
T-Mobile G2 Touch
Firmware Version
1.5
Baseband Version
63.18.55.06FU_6.35.07.08
Kernel Version
2.6.27-0078c992
Build Number
2.73.110.26 CL#69351 release-keys
Software Version
1.0.0.A6288
In order to root the phone, I had to downgrade the build number from 2.73.110.26 to 2.73.405.66.
Setting UP ADB on XP
First things first, we need to download and setup android SDK,
1) sdk can be downloaded from developer.android.com/sdk/
2) Extract the file to c:\AndroidSDK
3) Plug your phone in to the pc via USB cable. Windows should automatically find the drivers and you should get a message in the bottom right corner saying "device is setup and ready to use" (or something similiar).
Any issues here, google is your friend, find the drivers for your device
4) Now that windows can "see" your hero, click on Start, Run, type cmd and hit enter.
5) on this screen we need to check if adb is working so change the directory to where we extracted the sdk folder:
cd\ press enter
cd\ AndroidSDK\tools press enter
adb devices press enter
You should get something similiar to:
List of devices attached
HT9BTL900210 device
6) If you see this number, all is ok so far.
Now that adb is setup and we can communicate with our phone from the pc we need to create a Goldcard
Create Goldcard
( I tried with a 8GB ScanDisk and it worked)
Take a bakup of your sd card data, copy the files to your pc, before creating
a Goldcard as we need to format the card.
1) Ensure SD card is in your phone, click on Menu | Settings | SD Card & Phone Storage | Unmount SD card, wait a few ticks, then click on Format SD Card
2) Press back a few times and go to Settings | Application | Development and put a tick in USB Debugging
3) Connect the phone to the pc, then click on Start | Run | enter cmd and hit enter, we get the same command window as before
4) Now we need to obtain a code so that we can create the gold card. in the command prompt enter the following:
cd\ press enter
cd\ AndroidSDK\tools press enter
adb devices press enter
you should see a serial number displayed
5) Now type the following
adb shell press enter
cat /sys/class/mmc_host/mmc1/mmc1:*/cid press enter
You should get something similiar to this:
045354535230384780705c3088008a10
Make a note of this code.
6) Next go to this website >> http://hexrev.soaa.me/ , enter your code and click on Submit and make a note of the new code
7) Now go to http://revskills.de/pages/goldcard.html, fill in your details and paste the code, click on submit and check your e-mail. The godcard will be e-mailed to you, save this to your desktop.
8) Now we need to download and install a HexEditor so click the following link, download and install
http://download.cnet.com/HxD-Hex-Ed...068.html?part=dl-HxDHexEdi&subj=uo&tag=button
9) On your phone, pull down the notification bar and click to copy files to your computer, Click on Mount
10) Open the HexEditor and click on Extras | Open Disk | Under Physical Disk select Removable disk, uncheck "Open as Read Only" and click OK
11) Click on Extras | Open disk image | select the goldcard.img file (sent to you via email) Click ok when prompted for the disk size (512 Hard Disk/Floppy Disk)
12) You should have 2 tabs, one is your sd card and the other the goldcard. click on the goldcard, click on Edit | Select All, then Edit | Copy.
13) Click on the sdcard (removable disk) tab, highlight from offset 00000000 to 00000170, click on Edit | Paste Write. The highlighted cells should go red.
14) Click on File | Save and close the HexEditor
15) On your phone, pull down the notification bar and select to turn of USB storage. Pull down the notification bar again and click to copy files to your computer, Click on Mount. If XP opens the SD card all has worked ok.
16) On your phone, pull down the notification bar and select to turn of USB storage. Reboot your phone with the goldcard (sdcard) still inside.
Downgrade to an older ROM
1)You should already have HTC Sync installed on your computer, if not head over to http://www.htc.com/www/SupportDownload.aspx?p_id=283&cat=3&dl_id=852 | download and install HTC Sync
2) Next we need to down load the ROM, RUU_Hero_HTC_WWE_2.73.405.5_WWE_..exe which can be downloaded from here http://www.megaupload.com/?d=RCQ6V92U
3) Connect your phone to the pc and ensure HTC Sync picks up your phone, any issues here, either reboot your pc or phone until the phone\pc can see each other.
4) Double click the file you downloaded RUU_Hero_HTC_WWE_2.73.405.5_WWE_..exe and follow the instructions. they are very straight forward. It can take up 10 mins to complete.
Hopefully you should now have a phone with the Build Number as 2.73.405.5
If this is the case, continue reading.
Download Custom ROM
Now would be a good time to download the ROM you want to use, I am currently using Cronos which is based on 2.1 and is super quick
http://www.cronosproject.org/forum/viewforum.php?f=16&sid=332f8bccd0147f4ee8eb093920eb428d
1) Once downloaded, rename the file to Update.zip
2) Connect your phone to your pc and pull down the notification bar again and click to copy files to your computer, Click on Mount.
3) Copy the file, Update.zip to the root of your SD card.
4) On your phone, pull down the notification bar and select to turn of USB storage
Gain ROOT access
1) On your phone, click on Menu | Settings | Applications | put a tick in "Unknown Sources"
2) Connect the phone to your pc and on your phone, pull down the notification bar and click to copy files to your computer, Click on Mount
3) Download the following 2 files and save them to your desktop
http://zenthought.org/content/project/flashrec Version 1.1.3
http://www.megaupload.com/?d=WP29CWHK recovery-RA-hero-v1.5.2.img
You can also use recovery-RA-hero-v1.5.3.img but I found version 1.5.2 worked for me.
4) Copy both of these 2 files to the root of your SDcard, should show as Removable disk\media within "My Computer"
5) On your phone, pull down the notification bar and select to turn of USB storage. Disconnect your phone from the pc
6) Go to the market place and download a file manager, I used ASTRO
7) Open ASTRO and select flashrec-1.1.3.apk (the file you copied over), if prompted select package installer. click in Install if it doesnt automatically install the app
8) Open FlashRec (click on open after install) and click on Backup Recovery Image. Should take a few seconds to backup
9) Now click on the empty text box and type the following
/sdcard/recovery-RA-hero-v1.5.2.img then click on Flash Custom Recovery Image . It should take to long doing this, 10 seconds maybe
10) Power of your phone, once shutdown, hold down the Home and Power button together until the phone boots in to recovery mode
11) On the Recovery Screen, select Backup/Restore (using the trackball) and then Nand backup, this should take a minute or so
12) Next click on Wipe and select Wipe data/factory reset
13) Now select Flash zip from sdcard, this can take up to 5-15 mins. Once this is done, it should prompt you to reboot your phone, if not select "Reboot system Now"
14) Done, hopefully if everything when according to plan your phone should boot with Cronos (whichever rom you chose), the first time it boots it can take ages.
Update Radio
Check to ensure the radio version is 63.18.55.06JU_6.35.09.26, If yes skip this section, if not you can download it from the Modaco site
http://android.modaco.com/content/h...oms-radios-in-update-zip-format-for-gsm-hero/
1) Connect the phone to your pc and on your phone, pull down the notification bar and click to copy files to your computer, Click on Mount
2) Remove the update.zip file from the SD card
3) Rename the radio from 63.18.55.06JU_6.35.09.26 to Update.zip
4) On your phone, pull down the notification bar and select to turn of USB storage. Disconnect your phone from the pc
5) Power down your phone, select HOME and POWER to boot in to Recovery mode
6) Select Flash zip from sdcard, this should take roughly 5 mins, reboot the phone.
Thats it your done, If you click on Menu | Settings and nothing shows, reboot the phone again ( I had this rather strange issue)
Setting up SD CARD to work with A2SD
Follow this guide, its very good
http://androidandme.com/2009/08/news/how-to-manually-partition-your-sd-card-for-android-apps2sd/
Hopefully you now have a rooted phone all setup and working. As someone on here said, Road to Freedom

Thanks for this.
I'm still stuck. The goldcard seemed to work twice but when I tried the RUU_Hero_HTC_WWE_2.73.405.5_WWE_..exe it said "waiting for bootloader" and the screen on the Hero had changed to the white screen with 3 skateboarding androids and what looked like a selectable option "?RUU USB", can't quite remember but there was no way of selecting it and no buttons advanced the process.
Don't know if anyone else got this? Any tips on what I'm doing wrong?

did you receive any erros on your pc, i,e the RUU setup should be running andupdating you with whats happening, did that throw an error?

I will do it again tonight but got something along the lines of "waiting for bootloader.....timed out" Will confirm in the next hour, but some other threads said they needed to create a gold card a few times before one worked.
Any advice welcome

On the windows RUU update utility I get
ERROR [171]: USB CONNECTION ERROR
This is despite the device syncing well and being fully recognised by RUU until failing waiting for bootloader....
On the HTC Hero I get a white screen with 3 skateboarding androids on it.
On the white screen at the top I get
HERO CVT SHIP S-ON
HBOOT-1.76.0007 (HERO10000)
MICROP-010f
TOUCH PANEL-SYN0104
RADIO-6.35.07.08
Aug 4 2009, 19:43:30 (not the current time)
RUU USB <---- Highlighted in orange. making me think you could select it, however, no buttons on the device do anything. The Hero stays like this until I pull the battery out but then it boots normally (even after the RUU.exe exits). If I pull the USB cord out, the USB text dissapears and only RUU remains highlighted.
Any ideas? The SD card used is the stock one shipped with the device which others have said works fine. If no one has a better idea, I will try later using my other 8gb card, but this is a pain as I have to back it all up.

I formatted the SD card ie non-gold card version and repeated the RUU and got the same message so I'm assuming the goldcard didn't work. Sigh... not to back up my 16Gb card...

So i got a SD card another member recommended as working as a gold card = no go.
This is getting beyond a joke now. Nobody has information on what the actual
credentials are for a card to be use able? I've spent too much money on this crap
I think I'll just sell this ****.

So I tried my 16Gb card but that didn't work either.
I don't think I'm that unlucky to get two cards which won't work as Goldcards and am very confident I have followed the instructions correctly.
The only thing I can think of is that as my phone was returned from being fixed only two weeks ago, they may have patched the kernal so even Goldcard will not work. Sigh, I might just have to wait for T-mo to pull their finger out with the 2.1 upgrade.
For what it's worth, Kernel version:
2.6.27-0078c992
Build : 2.73.110.26
Software version: 1.0.0.A6288

Kernel Version:
2.6.27-0078c992
[email protected] #821
Build Number:
2.73.110.26 cl#69351
Software Version
1.0.0.A6288
Bought and last updated in December 2009
Anyone with the same build etc that was able to gold card?

Thanks for this info.
Looks like it's the same. No-one with a goldcard in south london wants a little visit from me and my Hero ?!?

Chaps, I tried 3 times and on my fourth attempt I was successful, I used a 8GB Scandisk Card which worked. I gave up twice but eventually got lucky and it worked so I understand your frustration
It maybe worth uninstalling and re-installing your drivers, or you can try this:
USBDeview >> http://download.cnet.com/USBDeview/3000-2094_4-10614190.html, download and install
Whilst the phone is plugged in, open USB Deview, find all the htc drivers and delete them, after deleting them, disconnect your phone and plug it back in, drivers should re-install,
Try again with a different USB port on your machine, let me know how you get on

For the guys having problems with goldcards,....
Once you have made the changes to the SD, saved and closed the HEX editor,... re-open it again to make sure the changes have actually saved.
...... Alternatively,... Check to see if there are any differences in the tutorial from this thread, compared to the one here ---> [Guide] Newbie Guide to Install a Custom Rom [Updated 14/04]
Hope something there helps.

Maybe OS may be an issue,... Mine failed on Win7 64bit but worked 1st time with an XP machine.

Complete success!
Seems it was a problem with Win 7 (32-bit).
Worked first time in Vista with the stock 2gb card already created using Win 7 earlier.
Happily now enjoying a custom 2.1 Rom!
Angry yet again with M$.
So pleased I've moved to Ubuntu as my main OS.

I managed to get my goldcard work first time round, fortunately. I used a SanDisk 2Gb card, but curiously, I realised afterwards I forgot to format it, I still had all the hidden linux files (starting with a .) on it
I think all T-mobile branded hero's use the same firmware initially.
Also, I couldn't get the USB to work on Win7, had to go onto XP.
Finally, a guy at my work had the same problem, not being able to goldcard his Hero, I suggested to him, when he goes into the hex editor, include all off the offsets, like when you get down to 170, highlight all the way down to the right of that line.

drspikes said:
Complete success!
Seems it was a problem with Win 7 (32-bit).
Click to expand...
Click to collapse
Wahey!! Glad your sorted now.

I wasnt able to use either of my Win7 (32 or 64) to do this, but behold my daughters Netbook with XP was the winner!!! worked perfect..now...whats the best rom currently?

j_simon208 said:
I wasnt able to use either of my Win7 (32 or 64) to do this, but behold my daughters Netbook with XP was the winner!!! worked perfect..now...whats the best rom currently?
Click to expand...
Click to collapse
I highly recomend MCR3.2 (MoDaCo Custom ROM for GSM Hero) ,... Fast, stable,.... No complaints at all. I flashed this on the 1st day i got my HERO,... Now waiting for a stable Android 2.1 release,... Probably MCR4.0.

ddotpatel said:
I highly recomend MCR3.2 (MoDaCo Custom ROM for GSM Hero) ,... Fast, stable,.... No complaints at all. I flashed this on the 1st day i got my HERO,... Now waiting for a stable Android 2.1 release,... Probably MCR4.0.
Click to expand...
Click to collapse
I have to agree, modaco 3.2 is fantastic, even when memory is running low its still quick, Paul has done an excellent job, flashed the hero with modaco 3.2 as soon as it was rooted, havent tried anything else yet

akhtar1817 said:
I have to agree, modaco 3.2 is fantastic, even when memory is running low its still quick, Paul has done an excellent job
Click to expand...
Click to collapse
Definately,.... Has been just over 6 week with my Hero now and haven't felt the need to even try another ROM.

Detailed guide for Rooting.

I have done this on a Windows 7 64-bit PC. If you have a Linux, run *.sh instead of *.bat
Required:
1. A formatted micro SD card.
2. Fully charged phone.
3. A windows PC.
4. Android SDK.
5. Backup tools to backup existing data on your Android phone.
Create GoldCard:
A GoldCard turns your device into a generic device, thereby allowing modifications like installing another firmware possible. There are different methods to create a GoldCard but I found this the easiest:
1. A formatted SD card is necessary for this. A GoldCard is nothing but a formatted SD card with modified CID. Insert the SD card in the phone and format the card (Settings -> SD Card & Phone Storage -> Unmount SD Card -> Format SD Card).
2. Download “Klutsch’s GoldCard creation tool” from here. Run this tool as administrator. (this tool is windows only)
3. Enable USB Debugging mode in your phone (Settings -> Applications -> Development -> USB Debugging) and connect the phone to your windows PC.
4. Click on “Get CID” Tab and copy the CID that is generated. In case you get any error, select MMC0.
5. Open the link “http://psas.revskills.de/?q=goldcard“, enter your email id and the CID. You will then get the GoldCard image to the mentioned email id.
6. Download the GoldCard image to PC, from the GoldCard creation tool, click on ‘load GoldCard.img’, select the image that you just downloaded and click on “Patch MMC”.
7. Voila, you now have your GoldCard. Please do not use this card for any other purpose till the rooting process is over and it’s time to downgrade the OS.
Remove the GoldCard and use the primary card till the GoldCard is needed. (not necessary)
Downgrade the OS:
Download the following packages before starting this process:
• Android SDK (copy the SDK to C:\ add C:\androidSDK\Tools to your windows path)
• hack4legendv5.zip
• RUU 1.31 for Legend
Connect your phone to the PC ‘charge only’ mode. copy the contents of hack4legendv5.zip to androidSDK/tools directory and then run the script crackin.bat The phone will reboot couple of times and there will be lot of errors shown in the terminal. In the end look for the line showing permissions for the file /dev/mtd/mtd0. It should look like this:
crwxrwxrwx 1 1001 2002 90, 0 Jul 19 16:19 /dev/mtd/mtd0
Click to expand...
Click to collapse
This means that your phone is ready for OS downgrade.
Now, connect your phone to the PC in ‘charge-only’ mode and execute the file RUU_Legend_HTC_WWE_1.31.405.5_R_Radio_47.26.35.04_ 7.05.35.26L_release_126592_signed.exe and just follow the instructions and the phone will reboot to 1.31 version of firmware. And it’s time for Legend to get rooted. There will be a few errors but don’t get disheartened.
Root the Legend:
Time to use the GoldCard. Insert the GoldCard and connect the phone to the PC in ‘charge only’ mode.
1. Download the file r4-legend-root.zip from here. Unzip the file to a directory and cd to the directory.
2. Switch off your Legend, switch it back on in ‘fast boot’ mode (keep the back button pressed while switching the phone ON). When you see that the phone has booted into fast boot screen.
3. Connect the phone to the PC and run step1-windows.bat
4. After that is over, select RECOVERY option. Fastboot screen –> Boot loader -> recovery. You need to use phone’s volume rocker to move up/down the menu and power button to select the option. The phone screen should now show a phone with red caution sign.
5. From the terminal window, run step2-windows.bat. Once this step is completed, the phone will be back in recovery mode. From the options, select ‘wipe data’ and then select the option to update the ROM, select the file ‘rootedupdate.zip’ from SD card. The rooting process will now start and after few minutes, the phone will boot with rooted firmware.
Moderators and other experienced Members, I know my editing isn't perfect here 'cause I'm in a hurry but this is the guide I followed and I was rooted within 15 minutes. Feel free to edit (Mods) and suggest (Members). Umm... does this belong to the Development section?

Fantastic guide. Really great. I had half a mind to do one myself, no need now. This should help a lot of people. It might also be worth going through the other threads, and pulling out an FAQ with links to relevant posts. I'll help with that if you like.
Get this in the stickies!

ishan_rulz said:
Required:
3. A windows PC.
Click to expand...
Click to collapse
Hmm, Windows? Haven't seen that for several years (thankfully) except on our house, but I can still manage to root...
Sent from my HTC Legend using XDA App

@TheGrammarFreak
Okay, if you have additional points, just write it down... I'll add it next time I edit it.
@BlaY0
I have only tested this on a Windows PC, but I'm sure it'll work on Linux too. Added it as a note before the guide. Thanks.

where do i dl "rootedupdate.zip" or when u do step 1 and step 2 it will be on card or what?

MeBeSad said:
where do i dl "rootedupdate.zip" or when u do step 1 and step 2 it will be on card or what?
Click to expand...
Click to collapse
The scripts push it on there. That's why the download is so big...

Bump. Well... can someone have this moved to the development part.

Any way to root via OS X?

I'm getting this error when trying to get the CID in the gold card tool, what am I doing wrong?
------------------------
* daemon not running. starting it now *
* daemon started successfully *
------------------------
Could not locate CID in output

Im also getting the same error as tecchtalknews and have no idea what is causing it. ps im using a sand disk 2gb sd card that came with the phone, and yes usb debugging is on.

ahh never mind, i just had to sync it with htc sync before i used gold card tools

Does it work for 2.2 devices XD
Sent from my HTC Legend using XDA Premium App

im stuck on .
copy SDK and android SKD to C ... are you suggesting installing the complete SKD and then copying the folder to C instead of C/program files / Android SDK .?
and when double clicking crackin.bat . the terminal shows up for about 4 seconds then disappears and nothing happens on my phone ..
help first time rooter ..
Cheers

ok so my problem is that i click "crackin.bat" my phone reboots several times, but them the cmd closes before i can see if it's "crwxrwxrwx 1 1001 2002 90, 0 Jul 19 16:19 /dev/mtd/mtd0" or not.. however i think it should be because i've already gotten the other, wrong "cr---w--" (or something) and i think i might be doing it right this time, but after that when i go with the "RUU_Legend_HTC_WWE_1.31.405.5_R_Radio_47.26.35.04_ 7.05.35.26L_release_126592_signed.exe" it gives me error "(-5001 : 0x80070002)" and nothing happens .. please help cuz i've whiped all the data to my phone although i had a lot of stuff and i'm really looking forward to this :/ newb rooter, sry :?

am also having the same problem
help

[GUIDE] Rooting HTC Wildfire (Froyo)

THIS GUIDE WILL HELP YOU ROOT ANY WILDFIRE WITH HBOOT VERSION 1.01.0001/1.01.0002
This guide is in fact a combination of two other guides:
http://forum.xda-developers.com/showthread.php?t=1145035
http://forum.xda-developers.com/showthread.php?t=1130044
I take no responsibility for whatever may happen to your phone.
To root, you first need to gain S-OFF, this part is taken from the first thread.
So here we go,
- Before doing anything, make sure you have the latest HTC SYNC on your PC (get it from here).
- Connect your phone to PC and sync all your data (contacts, media, docs...etc.)
- Disconnect your phone, then uninstall HTC SYNC, but you must leave the drivers on your PC.
(i.e. Uninstall the htc sync program only, not the drivers)
S-OFFing the Device
Downgrade to HTC Froyo WWE for AlphaRevX "now named: Revolutionary" (HBOOT 1.01.0001)
It has been confirmed that AlphaRevX "Revolutionary" tool is not S-OFFing wildfire (buzz) 2.2.1, with HBOOT 1.01.0002!
Therefore, downgrading the HBOOT to 1.01.0001 is must for the meantime, to get an efficient S-OFF.
Lots of people seem to be having issues when trying to downgrade their Wildfire from a carrier-branded version (HBOOT 1.01.0002) to unbranded WWE (HBOOT 1.01.0001).
So, here’s a small package to help you do this.
click here.
If you have HBOOT 1.01.0001, you can skip to the step entitled Revolutionary
Extract this package somewhere you can find it, like your “Desktop” for example.
Step 1: run step1.bat from the package. This will downgrade your MISC partition to allow for the RUU downgrade.
At the end, GoldCardTool will start up, to allow you to create a goldcard which you will need before starting Step 2.
How to deal with Gold-Card Tool:
1. Switch off your phone, remove your microSD card.
2. Insert the microSD card into your card reader, connect it to your computer and format the card to FAT32 file system.
3. Insert the card into your HTC Wildfire and power it on.
4. Make sure USB Debugging is enabled on your phone in Menu > Settings > Applications > Development.
5. Connect the phone to your computer via USB and set the mode to charge only.
6. Launch Gold-Card Tool on your computer and click ‘GetCID’.
7. Copy the CID code from the text box and click the link shown below that text box to open it in your browser window.
8. In the browser window, enter all the details required and submit that form.
9. You should now get an email from PSAS. Open it and download the ‘GoldCard.img’ attachment.
10. Now set your phone’s USB mode to Mass Storage.
11. In Gold-Card Tool, click ‘Refresh’.
12. Select your mounted SD card from the drop-down menu saying “HTC MMC:”
13. Click ‘Load Goldcard.img’ and select the file downloaded in Step 11.
14. Click ‘Patch MMC’ and your Gold Card will be created. You may exit Gold Card Tool once done.
After you've made the goldcard, and patched it, continue with step 2.
• Step 2: run step2.bat from the package. This will downgrade your ROM version to HTC WWE Froyo for Wildfire (unbranded).
If you get a Customer ID error while doing this, your goldcard is not working!
Create a new goldcard and re-run step2.
Revolutionary
* Steps:
1st You need to get to: http://revolutionary.io/ to download the tool, and to get your “beta key” which you’ll get in a pop-up window in the same download page after you click the download link for (windows version).
The “beta key” is a must; the tool won’t work without it!
You’ll be asked to provide your phone “serial no.”, typically it should be something like HTXXETDXXXXX, and you can get it from:
Settings --> about phone --> phone identity.
Now, do the following:
1. Run latest version of HTC Sync on your PC and connect phone in HTC Sync mode and sync all your files. Remove HTC Sync and not the drivers.
2. Reboot phone.
3. Settings->Applications->Development->Check “USB Debugging”.
4. Run Revolutionary and connect phone to PC in “Charge Only mode”.
5. Revolutionary should recognize your phone and show your Device Serial number.
7. Type out the “key” in the Revolutionary tool software, keeping in mind the upper and lower case letters and press enter (you can copy / paste the key).
8. Revolutionary should start doing its job and you’ll get S-OFF in less than 90 seconds.
9. If it takes longer, just wait for the 15 minutes mark, if nothing, then reboot phone and retry.
(Some members got S-OFF after multiple tries)
Now, to get to actually rooting the phone by installing clockworkmod and subsequently, the superuser app.
1. Ensure that your SD Card is FAT32 then copy this to the root of your SD card: http://forum.xda-developers.com/attachment.php?attachmentid=548407&d=1300751790
2. Go into HBOOT(switch off phone and switch on while holding down the volume down button) and click yes when it asks you to update
3. Remove the img file from your sd card and add this file: http://bit.ly/su2361ef
4. Go into HBOOT and click Recovery!
5. Click install zip from sdcard (or some thing like that) (Protip: Navigate in the recovery with the trackpad, not the power button!)
6. Click choose zip from sdcard
7. Locate your zip and let it update
8. Boot into your now rooted phone and install ROM Manager from the market.
9. Open ROM manager and Install Clockword Mod recovery (or sth like that) twice in a row (this is important to ensure proper installation)
YOU ARE NOW ROOT!!!!
Optional: Use ROM manager to install CyanogenMod or another ROM of your choosing

this dont work for me i tried many times.... when i try step 2.bat , cmd pops up does a **** load of codes then closes instantly?

gagan313 said:
this dont work for me i tried many times.... when i try step 2.bat , cmd pops up does a **** load of codes then closes instantly?
Click to expand...
Click to collapse
Firstly, were you even on HBOOT version 1.01.0002?
If you were, check if the downgrade was successful after running step2.bat
If it wasn't make sure HTC Sync has been uninstalled but the drivers have not
If the drivers are in place, I suggest looking for a solution at the orginal guide found at http://forum.xda-developers.com/showthread.php?t=1145035

nope i have 1.01.0002 and step 1 does its stuff no problem then goldcard automatically starts up no problem with that and i patched it and everything then step2.bat comes up and starts downgrade but like its doing a bit and just closes instantly back to hboot still showing s-on 1.01.0002????
i h ave windows 7 ultimate 64 bit../??? any help?

gagan313 said:
nope i have 1.01.0002 and step 1 does its stuff no problem then goldcard automatically starts up no problem with that and i patched it and everything then step2.bat comes up and starts downgrade but like its doing a bit and just closes instantly back to hboot still showing s-on 1.01.0002????
i h ave windows 7 ultimate 64 bit../??? any help?
Click to expand...
Click to collapse
Try making a new goldcard and try again.
And are you sure USB debugging is on?

i did.... but i just need to know..
does it work on windows vista 32 bit or windows 7 64 bit or like linux 64 bit.??

please watch this and please tell me if im doing anything wrong......
http://www.youtube.com/watch?feature=player_embedded&v=e7N1XIkdG2M
p.s sorry for poor quality...;(

gagan313 said:
please watch this and please tell me if im doing anything wrong......
http://www.youtube.com/watch?feature=player_embedded&v=e7N1XIkdG2M
p.s sorry for poor quality...;(
Click to expand...
Click to collapse
The first instruction tells you to switch off the phone before removing the SD card.
Try it again.
If it doesnt work, run everything as administrator, else, go to the orginal thread and post your problems there

im running it on windows 7 ultimate 64 bit??? does that make any difference??/

gagan313 said:
im running it on windows 7 ultimate 64 bit??? does that make any difference??/
Click to expand...
Click to collapse
Shouldn't.... but I did it on a XP 32 bit so maybe you could try running in compatibility mode...

i tried that but no luck..... i also tried on my windows vista 32bit with no luck

Finally got this process to work for me after numerous unsuccessful attempt. Main problem was I was using Win7. Switched to Win 3.1 and things worked.
Also in the guide the step
7. Copy the CID code from the text box
Need to me clarified to ... "Copy the reversed CID code from the text box "
After that all good and am now back on Hboot 1.01.0001.
Thanks for the guide.

Like a charm. Thanks.

Thanks for the information

CWM Issue
Hi,
I need help regarding clock work mod recovery.....
I have rooted my phone successfully bt I am facing issue with CWM ie whenever I am trying to go to recovery-> install zip from sd card, my card contents doesn't pop up, instead only the symbol of CWM is displayed...
please help..

Rahul2929 said:
Hi,
I need help regarding clock work mod recovery.....
I have rooted my phone successfully bt I am facing issue with CWM ie whenever I am trying to go to recovery-> install zip from sd card, my card contents doesn't pop up, instead only the symbol of CWM is displayed...
please help..
Click to expand...
Click to collapse
make sure that you're using the proper controls...:
After boot you select items by vol keys and choose by hitting the power button.
In CWM you also select by vol keys but choose by hitting trackball
Have you done so?

thank u very much it did work....
bt I am stuck with a new issue....I was installing a custom rom and my phone is stuck in the htc window and is not booting up.
can u recommend any solution for it..

Rahul2929 said:
thank u very much it did work....
bt I am stuck with a new issue....I was installing a custom rom and my phone is stuck in the htc window and is not booting up.
can u recommend any solution for it..
Click to expand...
Click to collapse
At first boot it might take a while to boot up. If it remains stuck on the logo I'd suggest to reinstall but do a "full wipe/factory reset" from inside ClockworkMod (even better format system and data before).
BTW Which ROM are you trying to install?

Thank u very much for ur help....I appreciate u people very much....
Bt actually that rom was not good that's y I was facing that issue
Sent from my HTC Wildfire S A510e using xda premium

IF YOU HAVE PROBLEMS WITH CMD and are on Windows 7 (or similar), make sure you start CMD in admin mode.
Otherwise it doesn't work.
1- Make sure the files are stored in a folder in C:\ (or somewhere very short unless you know command line). For example: C:\goldcard
Copy the files from the folder they came in and throw them in there.
2- Go to start and write CMD. Now DO NOT single click the program or type enter. Instead do CONTROL+SHIFT+ENTER
This opens it in Admin mode. (some pop up confirmation may appear).
3- Navigate to the folder by writing "cd C:\goldcard". (Without the quotation marks of course. Use the name of the folder you created in step number one.)
4- write step1.bat
That should do it. The same applies to step2.

Andoird to WM 6.5

Hello everyone!
I have a HTC Blackstone, which I managed to flash with NAND Android (by fagyi). Unfortunately, I don't find it matches the device and would like to try a WM Rom (like Energy or so).
After many searches, I can't even run the Task 29 procedure with BlackstoneAdvancedRUU.exe, as the pc does not seem to communicate with the HTC. I have the appropriate drivers installed.
Please, could someone help with this...

rename the flash file (ruu_signed.nbh) to BLACIMG.NBH
Copy the flash file to the root of the SD-card.
Power off the phone.
Hold volume down and press power (battery must be at least) 50%.
Flash from SD card.
---------- Post added at 10:28 PM ---------- Previous post was at 10:28 PM ----------
Another PC might also work.

JJSta said:
Hello everyone!
I have a HTC Blackstone, which I managed to flash with NAND Android (by fagyi). Unfortunately, I don't find it matches the device and would like to try a WM Rom (like Energy or so).
After many searches, I can't even run the Task 29 procedure with BlackstoneAdvancedRUU.exe, as the pc does not seem to communicate with the HTC. I have the appropriate drivers installed.
Please, could someone help with this...
Click to expand...
Click to collapse
This custom Android ROM has issues with USB-PC connection. This has been documented in fagyi's ROM thread.
Reverting back to WinMo:
No need for Task 29. Like HTC0017 said, make sure the battery is at least 50%.
Step 1. Power off the phone and remove SDcard from phone and use an SDcard adapter to attach it to PC using USB. If you do not have adapter, you can find another device, such as a tablet, camera, anything that uses SDcard and have USB connector.
Step 2. Once you have the adapter connected by USB to PC, and copy the ROM (RUU_SIGNED.NBH) to the SDcard. I will recommend you use this any variants of the ROM in this thread.
http://forum.xda-developers.com/showthread.php?t=1719627
By far, I find it most reliable and conserves battery life (mine goes to 7 or 8 days on a charge, depending on the Telco signal coverage). There are WM7 and Android user-interfaces, too.
Step 3. Rename the RUU_SIGNED.NBH to BLACIMG.NBH
Step 4. Put the SDcard back to the phone.
Step 5. Hold Vol Down key and press Power. You will come to the tri-color screen. Release Vol Down and Power keys. Then the phone will come to a white screen that ask you whether you want to update. There should be a line on top stating BLACIMG.NBH followed by another line OS.
Step 6. Press Power to update. This will take a couple of minutes only.
Step 7. When you see Update Successful, remove the back cover and reset. Reset can be done in 2 ways.
a. Preferred way - use a paper-clip or something to poke the red reset button
b. Remove the battery and put it back, and then press Power and power up the phone.
The phone will now re-start and initialise the ROM files to the memory. Depending on the ROM you use, the phone will reset by itself or ask you to reset it once again. Then it's completed.
Hope this helps.
P.S. Once you have done the WM installation, you may also wish to update you HSPL and Radio ROM, but that is another process. . .

[GUIDE] SmartQ Z1 Lite unbrick / fix bootloop

Hi guys, I saw that so much people have problem with SmartQ Z1 Lite. However, after few days watch becomes slow and it just have bootloop. I had same problem for weeks, until I found a way to fix it.
Notice! This tutorial is for LITE verrsion only, full version have it's own unbrick tool.
- Download the tools from attachment (end of thread)
- Make new folder on desktop and extract the downloaded .zip to that folder
1. STEP Entering the nexus
- Turn off the watch, make sure that is completely off (plug in the usb cable and check if your machine detects it)
- After that plug in usb cable and press the Power and Back button on watch together for few seconds, your PC will detect it as USB boot device or something
- Go to device manager and right click on that device and update driver software, browse computer and then Let me pick the button..
Click on All devices and then Have disk, browse to the tool folder and 32/64 bit usb driver and choose ini file
Install that driver.
- Unplug usb cable
2. STEP Preparing the savior
- Open TabControl.exe and right click on anywhere on tool, and then click Config
- Click on Import config and find the folder you extracted tool, then folder "ini" and choose the Jz4775--Nand-FINAL.ini
- Then click Manual config and where is uboot on the right "..." browse for the x-boot-nand.bin
- For uimage choose recovery.img
- And then click OK, and don't save the config
3. STEP Let the battle begins
- Plug in USB cable and the tool should start flashing new recovery
- Wait few minutes and it should write Successfull
- After that watch should turn off, unplug and plug in cable again
- Hold the power button for few seconds until you get a charging interface, press back button and hold, and then power button and hold untill it vibrates
- You should see factory upgrade interface and new removable disc should be in computer
- Copy the update.zip from required_flash_files/ folder to new removable disc.
- Now press the back button, and then again where is "Upgrade", your watch should get upgraded
Aaand voilaa!
DOWNLOAD
https://mega.co.nz/#!YBhzyJoY!yfIpdySc_NQDaBHEBPB0kY1yn81IxpKQzARO3B2U1OQ

i need a mirror link

Somebody do this?
is it working?

csonti02 said:
Somebody do this?
is it working?
Click to expand...
Click to collapse
I've sent you the mirror, as soon as i get more posts, i'll edit the thread with mirror.

link
https: //mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ
HarisDev said:
I've sent you the mirror, as soon as i get more posts, i'll edit the thread with mirror.
Click to expand...
Click to collapse
---------- Post added at 10:26 PM ---------- Previous post was at 10:08 PM ----------
it is working. I try many times (3) but after working (write sacesfull) after i updated 1.5 and work.
many thanks.
csonti02 said:
https: //mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ
Click to expand...
Click to collapse

Please send me a mirror I have had my watch shelved since March. You've just given me new hope.

siakgayyem said:
Please send me a mirror I have had my watch shelved since March. You've just given me new hope.
Click to expand...
Click to collapse
https://mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ

Wow this method works. thank you very much. My watch has successfully booted at last since it started to bootloop last march. Harisdev you are a miracle worker. Csonti02 thanks for the link. Both you guys saved me a lot of money (which I dont have much) I was already contemplating on returning the watch to china for repairs. I can not thank you enough.

siakgayyem said:
Wow this method works. thank you very much. My watch has successfully booted at last since it started to bootloop last march. Harisdev you are a miracle worker. Csonti02 thanks for the link. Both you guys saved me a lot of money (which I dont have much) I was already contemplating on returning the watch to china for repairs. I can not thank you enough.
Click to expand...
Click to collapse
the wizard is harisdev ))))) thanks.

Yay.. glad to see that this helped to you guys.
If anyone needs help, feel free to post reply.

Perfect work! Now hold still trying to get to work with the latest update.
Any help for that i cannot get bluetooth on in lite ?

Tohelo said:
Perfect work! Now hold still trying to get to work with the latest update.
Any help for that i cannot get bluetooth on in lite ?
Click to expand...
Click to collapse
Hi Tohelo, thanks.
Try to download update.zip version 1.3 from official site (Click here!) and update by system upgrade. If u don't know how to, please tell me so I can write tutorial.

HarisDev said:
Hi Tohelo, thanks.
Try to download update.zip version 1.3 from official site (Click here!) and update by system upgrade. If u don't know how to, please tell me so I can write tutorial.
Click to expand...
Click to collapse
Yeah I've done that and the installation is successful but now I have a problem that I can not get bluetooth turned on

Tohelo said:
Yeah I've done that and the installation is successful but now I have a problem that I can not get bluetooth turned on
Click to expand...
Click to collapse
I will see tomorrow, i have some tasks to do..

really need help
HarisDev said:
Hi guys, I saw that so much people have problem with SmartQ Z1 Lite. However, after few days watch becomes slow and it just have bootloop. I had same problem for weeks, until I found a way to fix it.
Notice! This tutorial is for LITE verrsion only, full version have it's own unbrick tool.
- Download the tools from attachment (end of thread)
- Make new folder on desktop and extract the downloaded .zip to that folder
1. STEP Entering the nexus
- Turn off the watch, make sure that is completely off (plug in the usb cable and check if your machine detects it)
- After that plug in usb cable and press the Power and Back button on watch together for few seconds, your PC will detect it as USB boot device or something
- Go to device manager and right click on that device and update driver software, browse computer and then Let me pick the button..
Click on All devices and then Have disk, browse to the tool folder and 32/64 bit usb driver and choose ini file
Install that driver.
- Unplug usb cable
2. STEP Preparing the savior
- Open TabControl.exe and right click on anywhere on tool, and then click Config
- Click on Import config and find the folder you extracted tool, then folder "ini" and choose the Jz4775--Nand-FINAL.ini
- Then click Manual config and where is uboot on the right "..." browse for the x-boot-nand.bin
- For uimage choose recovery.img
- And then click OK, and don't save the config
3. STEP Let the battle begins
- Plug in USB cable and the tool should start flashing new recovery
- Wait few minutes and it should write Successfull
- After that watch should turn off, unplug and plug in cable again
- Hold the power button for few seconds until you get a charging interface, press back button and hold, and then power button and hold untill it vibrates
- You should see factory upgrade interface and new removable disc should be in computer
- Copy the update.zip from required_flash_files/ folder to new removable disc.
- Now press the back button, and then again where is "Upgrade", your watch should get upgraded
Aaand voilaa!
My watch is working and everynotification works but theres a problem where it says the application smartwatchlauncher stopped workig so i cant do anything including accessing settings but i get notifications and i cannot upgrade how will i fix this
Click to expand...
Click to collapse

http://www.smartdevices.com.cn/support/download/Zwatchqc/FirmWare/z1litev1.5.html
Download this and flash update.zip

its asking for a decryption key what is it also my computer wont dowload the other one because it says it a virus

Hi,
I'm having trouble in the last point of the first step.
I can only choose inf files, not ini files.
I am pretty sure i am following the steps right but i get stuck on that part.

HarisDev said:
Yay.. glad to see that this helped to you guys.
If anyone needs help, feel free to post reply.
Click to expand...
Click to collapse
Hi,
I'm having trouble in the last point of the first step.
I can only choose inf files, not ini files.
I am pretty sure i am following the steps right but i get stuck on that part.