Database Users

Help!! messed up updating cyanogenmod! Bricked??

I really need some help please! I think I may have done something very bad. I have a tmobile mytouch 3g. I was trying to update from cyanogenmod 4.2.1.9. I was using a darkstar theme from ringer nation.
Here’s where I think i screwed myself. I am fairly new to all this stuff so I was trying to find a guide on how to update the mod and instead of doing it properly by adding the files to the sd card, doing a wipe, and then installing everything. I instead messed up and did an install of sapping.nbh and basically followed all the directions to originally root the phone. Including formatting the sd card and everything. When I realized that i was doing this all wrong I was still able to load my os and everything seemed ok. I was getting a sd card error that said that the card was blank or had an unsupported file system, but I was able to mount it so, I erased everything off the card and then put the cyanogen update and the drc83_base file and attempted to load into recovery and do the update.
I loaded into and did a wipe. I attempted to follow the instructions on upgrading from the cyogen page. (God I wish I had found that page first) But after I did the wipe and I attempt to Apply any from SD I get “error: sd card is not mounted”
When I attempt to reboot the phone it goes to the tmobile mytouch logo, THEN it goes to my them logo from Ringer Nation, then it just goes to a black screen I let it sit there for like 5 minutes to see what would happen, but nothing. So I took out the battery and sim. I can get into recovery though so I hope that someone can help me figure out where to go from there.I thought that since I had done a wipe that the theme would have been deleted as well? This is weird.
I did do a nandroid backup before. Hopefully that will prove to be helpful. Sorry for the long post, but I wanted to dump as much useful information about this problem so that hopefully someone will be able to help! BTW I'm using a mac with the latest snow leopard software.
As I am desperate for help, please reach out to me via aim – icolinirie or via email
Thank you in advance for everything. This is a great community, and all of Cyanogen’s work is greatly appreciated!!
EDIT: I really need some help! Here's some more information. I have a Magic 32B. Its running Cyanogenmod v1.4 + JF Recovery.
From what I have gathered I need to adp into my phone in order to get it to mount. Anyone know how to do this on a mac. I am trying, but I don't fully understand. I have created the .bash_profile from terminal and typed the following "export PATH=${PATH}:/Users/itunes/Documents/android-sdk-mac_86/tools" which is the path to the tools file in the sdk. I am just stuck at this point. I don't know what to do from here.

Hi I quote.
Install SDK utilities you need to connect your PC to your phone
You can download the full SDK from the Android Developer website for your platform
http://developer.android.com/sdk/index.html
You'll need to download the SDK appropriate for your platform and extract it into a directory somewhere. I'm going to assume you're using Windows here and suggest you extract it into a folder called
C:\AndroidSDK\
on your hard disk. You can put it anywhere you like really, but if you do you'll need to substitute it for the folder above.
Add the tools directory to your system path for easy access
In Windows it's easy to add the Android SDK Tools directory to your system path. Doing this lets you use the Android SDK tools anywhere and makes it easier for you.
On Windows XP: Go to Control Panel->System, Choose the 'Advanced' tab and then click 'Environment Variables' To do this on Vista/Windows7: Simply go to Control Panel->System and choose 'Advanced System Settings' and then 'Environment Variables'
Now that you've got here locate Path under System Variables and click Edit, then add the following to the end of the string displayed:
;C:\AndroidSDK\tools\
Then click OK until you get out of the menus.
Now that you've done this you should be able to bring up a command shell and type 'adb' and it should run straight away without needing to change path.
Please note that you can skip this step completely if you find it too complicated - however you will need to CD to the ?AndroidSDK\tools every time you open up a command prompt so it's worthwhile doing. I'm going to assume you have made the change above in all further examples as it gets too complicated really. If you're not confident in a DOS shell, I'd suggest you do a little bit of reading up on basic navigation in DOS first.
Enable Debugging mode on the phone before connecting to PC and installing the ADB driver
Menu > Settings > Applications > Developement > USB Debugging
Install the USB drivers correctly - check using "adb devices".
If you have already connected your phone to your computer before then the USB drivers are probably already loaded. If you're lucky then typing 'adb devices' in a command prompt will produce something like:
C:\AndroidSDK>adb devices
List of devices attached
XXXXXXXXXXXX device
Where XXXXXXXXXXXX is the serial number of your phone. If it doesn't produce that line, then you need to check Device Manager and ensure the device drivers for your phone were installed correctly.
If you are having issues installing the ADB driver, you need to connect your phone then go into Device Manager and check the ADB device properties. Check the following property and it'll look something like:
Device Instance Id: USB\VID_0BB4&PID_0C02&MI_01\7&293A7D0D&0&0001
To fix the driver installation problem, you need to edit the driver's .ini file and change all the references of 0C03 to 0C02, or 0C02 to 0C03 if your device property states your Device Id is 0C03.
Note: After flashing a new ROM, your Device Id may change again to either 0C03 or remain as 0C02. So you need to update the .ini file again as above to refelect the change and re-install the driver. Another known way to fix the above issue is to download and install HTC Sync - this seems to install the correct drivers.
How to use ADB
ADB stands for Android Debugging Bridge - it's a useful way of talking to your handset while it's running. ADB provides commands for copying files to and from your phone, installing packages and debugging your Android applications.
Useful commands include:
adb devices - lists which devices are currently attached to your computer
adb install <packagename.apk> - lets you install an Android application on your phone
adb remount - Remounts your system in write mode - this lets you alter system files on your phone using ADB
adb push <localfile> <location on your phone> - lets you upload files to your phones filesystem
adb pull <location on your phone> <localfile> - lets you download files off your phones filesystem
adb logcat - starts dumping debugging information from your handset to the console - useful for debugging your apps
adb shell <command> - drops you into a basic linux command shell on your phone with no parameters, or lets you run commands directly
How to use Fastboot
Fastboot is another boot method and is used to drop the phone into a safe mode to load/flash alternate roms. You need USB debugging turned on before you can use Fastboot mode - so I'd recommend you do this first (under Settings->Applications->Development->USB Debugging). You will also need to power off your phone first (hold down Power and select Power Off) and then hold down the Back+Power Buttons to start the phone in Fastboot mode. You will need your USB cable connected to be able to issue any commands and assuming your drivers are correct you should be able to issue:
C:\AndroidSDK>fastboot devices
List of devices attached
XXXXXXXXXXXX fastboot
Other commands in this mode include - we'll cover these below in subsequent sections.
fastboot boot <filename> - boots a rom stored on your pc specified by the filename
fastboot flash <partition> <filename> - flashes a rom stored on your pc, partition can be one of {boot, recovery, system, userdata}
fastboot binaries for mac and linux can be found here.
3. Learn how to use fastboot and boot a recovery rom
Download a recovery rom for your device
There are several different recovery roms available for the HTC Magic devices.
Amon_RA has created several nice recovery roms available from http://forum.xda-developers.com/showthread.php?t=530492 and get the Recovery Rom appropriate for your device - these recovery roms have Nandroid Backup and Nandroid Restore and are perfect for the average user.
You can also use Cyanogen's 1.3.1 Recovery ROM available for: PVT32A devices and PVT32B devices - this rom has some additional options for partitioning your SD card for ?Apps2SD/Swapper/etc.
Fastboot the recovery rom
Fastbooting a rom doesn't write anything to your device - it just loads it directly from your PC - so it's a completely safe way of fixing/recovering/backing up your existing rom. To fastboot a rom you need to first drop your phone into Fastboot mode and check that it's working. Now drop into a command shell and make sure the recovery image you're wanting to load is in the same directory that you're running this in. If it's called something other than recovery-rom.img then substitute that instead.
C:\AndroidSDK> fastboot boot recovery-rom.img
If you are having problems changing the directory in the command prompt, just make a copy of the command prompt .exe itself, and place it in the folder that contains the recovery rom, then run the above command.
And once again, if you have a perfected SPL which does not allow remote fastboot, you will have to fix it first.
Use the Recovery Rom to Backup your current ROM with Nandroid
Once you've booted to a recovery rom - you can use the Nandroid Backup option. If you get a 'cannot mount /dev/mkblkxxx error' when you do this then check your microSD card is inserted correctly and if so, wait a few seconds for it to register to the recovery rom correctly. If at first you don't succeed, try, try again (sdcard can take a few seconds to mount!)
You do not need to be a rocket scientist to do this.
you can use the ADB to put in recovery again by fast boot
http://forum.xda-developers.com/showthread.php?t=530492

Hey! First off Thanks for the reply! I really appreciate someone chiming in to throw some advice my way! But while reading your thread you described the instructions for windows. In this case I have a macbook pro running snow leopard.
I did download the android sdk to my documents folder and I understand that I need to execute some scripts from the terminal on my mac to get things running. But I really dont know what those scripts are or what exactly to do.
I can get into the recovery mode on the MyTouch by holding power and home when powering on. So do I open the console from the recovery screen on the mytouch and then run the scripts on the terminal from my macbook? And which scripts should I run to get the sd card mounted onto my desktop (that is what I'm trying to do). Im not too sure what to do from there either. I want to get the phone back to stock android 1.5 os so that I can root again. My sd card has to be corrupted because it keeps giving me an error saying that it wont mount when I try to do a fix file systems or try anything from that menu. What to do??

What!
can you get in the recovery?

Yeah I can get into cyanogen v1.4 recovery. I'm just stuck from there.

Ok ok If I understand this correctly then you are not briced. you do not have any imag on your phone.
if you do not have anything nadroid recovery on sdcard you must enter a new ROM on the sdcard and flash it
remember full wipe.!

Yes this is what I believe I must do. But I need to either find a way to mount my SD card from the phone while it is in recovery mode (cyanogen v1.4). That's my problem.. I wish there was an easier way to get it mounted onto my mac from the recovery screen. I think I'm just going to go to best buy tomorrow and get a micro sd card reader and maybe another sd card just in case.
Once I have done that though. What files should I put onto the sd card in order to flash it back to original factory android 1.5.
What do you think?

Good idea
I have never used cyanogen v1.4 recovery
I use the recovery-RA-sapphire-v1.5.2H.img and ther you can use USB togle in recovery mode, You must go to the store to buy the adapter that fits on your Mac, I have two adapters for your Mac, you can borrow

Yeah that's the plan for tomorrow. Thanks for the offer man. But I'm in Los Angeles, Ca LOL!! Where are you?

icolinirie said:
Yeah that's the plan for tomorrow. Thanks for the offer man. But I'm in Los Angeles, Ca LOL!! Where are you?
Click to expand...
Click to collapse
Bergen . norway.
http://maps.google.no/maps?f=s&utm_...o-google-gm&utm_medium=ha&utm_term=google map

OMG! WOW! Looks like a beautiful place! LA is a concrete jungle but beautiful in its own respects. Bergen looks like a very comfortable place! I enjoy finding out about these things. Maybe someday I'll visit. I'd definitely love to!

icolinirie said:
OMG! WOW! Looks like a beautiful place! LA is a concrete jungle but beautiful in its own respects. Bergen looks like a very comfortable place! I enjoy finding out about these things. Maybe someday I'll visit. I'd definitely love to!
Click to expand...
Click to collapse
it is sick cold. I'll take one picture out the window

[GUIDE] Gain root access HTC Hero TMobile

I have finally managed to root my phone. after trying for a rather long time, i did it yesterday and am running modaco custom ROM which is superb. I have listed the instructions I followed in case anyone else is having the same issues as i had
(unable to backup via amon RA image - backup failed)
Text in Bold indicates something you need to type
(Instructions taken from various sites - for XP only - Credits to Unlocker & Modaco)
If your current build number is 2.73.405.5 you can skip the Goldcard section
Phone Details:
Model Number
T-Mobile G2 Touch
Firmware Version
1.5
Baseband Version
63.18.55.06FU_6.35.07.08
Kernel Version
2.6.27-0078c992
Build Number
2.73.110.26 CL#69351 release-keys
Software Version
1.0.0.A6288
In order to root the phone, I had to downgrade the build number from 2.73.110.26 to 2.73.405.66.
Setting UP ADB on XP
First things first, we need to download and setup android SDK,
1) sdk can be downloaded from developer.android.com/sdk/
2) Extract the file to c:\AndroidSDK
3) Plug your phone in to the pc via USB cable. Windows should automatically find the drivers and you should get a message in the bottom right corner saying "device is setup and ready to use" (or something similiar).
Any issues here, google is your friend, find the drivers for your device
4) Now that windows can "see" your hero, click on Start, Run, type cmd and hit enter.
5) on this screen we need to check if adb is working so change the directory to where we extracted the sdk folder:
cd\ press enter
cd\ AndroidSDK\tools press enter
adb devices press enter
You should get something similiar to:
List of devices attached
HT9BTL900210 device
6) If you see this number, all is ok so far.
Now that adb is setup and we can communicate with our phone from the pc we need to create a Goldcard
Create Goldcard
( I tried with a 8GB ScanDisk and it worked)
Take a bakup of your sd card data, copy the files to your pc, before creating
a Goldcard as we need to format the card.
1) Ensure SD card is in your phone, click on Menu | Settings | SD Card & Phone Storage | Unmount SD card, wait a few ticks, then click on Format SD Card
2) Press back a few times and go to Settings | Application | Development and put a tick in USB Debugging
3) Connect the phone to the pc, then click on Start | Run | enter cmd and hit enter, we get the same command window as before
4) Now we need to obtain a code so that we can create the gold card. in the command prompt enter the following:
cd\ press enter
cd\ AndroidSDK\tools press enter
adb devices press enter
you should see a serial number displayed
5) Now type the following
adb shell press enter
cat /sys/class/mmc_host/mmc1/mmc1:*/cid press enter
You should get something similiar to this:
045354535230384780705c3088008a10
Make a note of this code.
6) Next go to this website >> http://hexrev.soaa.me/ , enter your code and click on Submit and make a note of the new code
7) Now go to http://revskills.de/pages/goldcard.html, fill in your details and paste the code, click on submit and check your e-mail. The godcard will be e-mailed to you, save this to your desktop.
8) Now we need to download and install a HexEditor so click the following link, download and install
http://download.cnet.com/HxD-Hex-Ed...068.html?part=dl-HxDHexEdi&subj=uo&tag=button
9) On your phone, pull down the notification bar and click to copy files to your computer, Click on Mount
10) Open the HexEditor and click on Extras | Open Disk | Under Physical Disk select Removable disk, uncheck "Open as Read Only" and click OK
11) Click on Extras | Open disk image | select the goldcard.img file (sent to you via email) Click ok when prompted for the disk size (512 Hard Disk/Floppy Disk)
12) You should have 2 tabs, one is your sd card and the other the goldcard. click on the goldcard, click on Edit | Select All, then Edit | Copy.
13) Click on the sdcard (removable disk) tab, highlight from offset 00000000 to 00000170, click on Edit | Paste Write. The highlighted cells should go red.
14) Click on File | Save and close the HexEditor
15) On your phone, pull down the notification bar and select to turn of USB storage. Pull down the notification bar again and click to copy files to your computer, Click on Mount. If XP opens the SD card all has worked ok.
16) On your phone, pull down the notification bar and select to turn of USB storage. Reboot your phone with the goldcard (sdcard) still inside.
Downgrade to an older ROM
1)You should already have HTC Sync installed on your computer, if not head over to http://www.htc.com/www/SupportDownload.aspx?p_id=283&cat=3&dl_id=852 | download and install HTC Sync
2) Next we need to down load the ROM, RUU_Hero_HTC_WWE_2.73.405.5_WWE_..exe which can be downloaded from here http://www.megaupload.com/?d=RCQ6V92U
3) Connect your phone to the pc and ensure HTC Sync picks up your phone, any issues here, either reboot your pc or phone until the phone\pc can see each other.
4) Double click the file you downloaded RUU_Hero_HTC_WWE_2.73.405.5_WWE_..exe and follow the instructions. they are very straight forward. It can take up 10 mins to complete.
Hopefully you should now have a phone with the Build Number as 2.73.405.5
If this is the case, continue reading.
Download Custom ROM
Now would be a good time to download the ROM you want to use, I am currently using Cronos which is based on 2.1 and is super quick
http://www.cronosproject.org/forum/viewforum.php?f=16&sid=332f8bccd0147f4ee8eb093920eb428d
1) Once downloaded, rename the file to Update.zip
2) Connect your phone to your pc and pull down the notification bar again and click to copy files to your computer, Click on Mount.
3) Copy the file, Update.zip to the root of your SD card.
4) On your phone, pull down the notification bar and select to turn of USB storage
Gain ROOT access
1) On your phone, click on Menu | Settings | Applications | put a tick in "Unknown Sources"
2) Connect the phone to your pc and on your phone, pull down the notification bar and click to copy files to your computer, Click on Mount
3) Download the following 2 files and save them to your desktop
http://zenthought.org/content/project/flashrec Version 1.1.3
http://www.megaupload.com/?d=WP29CWHK recovery-RA-hero-v1.5.2.img
You can also use recovery-RA-hero-v1.5.3.img but I found version 1.5.2 worked for me.
4) Copy both of these 2 files to the root of your SDcard, should show as Removable disk\media within "My Computer"
5) On your phone, pull down the notification bar and select to turn of USB storage. Disconnect your phone from the pc
6) Go to the market place and download a file manager, I used ASTRO
7) Open ASTRO and select flashrec-1.1.3.apk (the file you copied over), if prompted select package installer. click in Install if it doesnt automatically install the app
8) Open FlashRec (click on open after install) and click on Backup Recovery Image. Should take a few seconds to backup
9) Now click on the empty text box and type the following
/sdcard/recovery-RA-hero-v1.5.2.img then click on Flash Custom Recovery Image . It should take to long doing this, 10 seconds maybe
10) Power of your phone, once shutdown, hold down the Home and Power button together until the phone boots in to recovery mode
11) On the Recovery Screen, select Backup/Restore (using the trackball) and then Nand backup, this should take a minute or so
12) Next click on Wipe and select Wipe data/factory reset
13) Now select Flash zip from sdcard, this can take up to 5-15 mins. Once this is done, it should prompt you to reboot your phone, if not select "Reboot system Now"
14) Done, hopefully if everything when according to plan your phone should boot with Cronos (whichever rom you chose), the first time it boots it can take ages.
Update Radio
Check to ensure the radio version is 63.18.55.06JU_6.35.09.26, If yes skip this section, if not you can download it from the Modaco site
http://android.modaco.com/content/h...oms-radios-in-update-zip-format-for-gsm-hero/
1) Connect the phone to your pc and on your phone, pull down the notification bar and click to copy files to your computer, Click on Mount
2) Remove the update.zip file from the SD card
3) Rename the radio from 63.18.55.06JU_6.35.09.26 to Update.zip
4) On your phone, pull down the notification bar and select to turn of USB storage. Disconnect your phone from the pc
5) Power down your phone, select HOME and POWER to boot in to Recovery mode
6) Select Flash zip from sdcard, this should take roughly 5 mins, reboot the phone.
Thats it your done, If you click on Menu | Settings and nothing shows, reboot the phone again ( I had this rather strange issue)
Setting up SD CARD to work with A2SD
Follow this guide, its very good
http://androidandme.com/2009/08/news/how-to-manually-partition-your-sd-card-for-android-apps2sd/
Hopefully you now have a rooted phone all setup and working. As someone on here said, Road to Freedom

Thanks for this.
I'm still stuck. The goldcard seemed to work twice but when I tried the RUU_Hero_HTC_WWE_2.73.405.5_WWE_..exe it said "waiting for bootloader" and the screen on the Hero had changed to the white screen with 3 skateboarding androids and what looked like a selectable option "?RUU USB", can't quite remember but there was no way of selecting it and no buttons advanced the process.
Don't know if anyone else got this? Any tips on what I'm doing wrong?

did you receive any erros on your pc, i,e the RUU setup should be running andupdating you with whats happening, did that throw an error?

I will do it again tonight but got something along the lines of "waiting for bootloader.....timed out" Will confirm in the next hour, but some other threads said they needed to create a gold card a few times before one worked.
Any advice welcome

On the windows RUU update utility I get
ERROR [171]: USB CONNECTION ERROR
This is despite the device syncing well and being fully recognised by RUU until failing waiting for bootloader....
On the HTC Hero I get a white screen with 3 skateboarding androids on it.
On the white screen at the top I get
HERO CVT SHIP S-ON
HBOOT-1.76.0007 (HERO10000)
MICROP-010f
TOUCH PANEL-SYN0104
RADIO-6.35.07.08
Aug 4 2009, 19:43:30 (not the current time)
RUU USB <---- Highlighted in orange. making me think you could select it, however, no buttons on the device do anything. The Hero stays like this until I pull the battery out but then it boots normally (even after the RUU.exe exits). If I pull the USB cord out, the USB text dissapears and only RUU remains highlighted.
Any ideas? The SD card used is the stock one shipped with the device which others have said works fine. If no one has a better idea, I will try later using my other 8gb card, but this is a pain as I have to back it all up.

I formatted the SD card ie non-gold card version and repeated the RUU and got the same message so I'm assuming the goldcard didn't work. Sigh... not to back up my 16Gb card...

So i got a SD card another member recommended as working as a gold card = no go.
This is getting beyond a joke now. Nobody has information on what the actual
credentials are for a card to be use able? I've spent too much money on this crap
I think I'll just sell this ****.

So I tried my 16Gb card but that didn't work either.
I don't think I'm that unlucky to get two cards which won't work as Goldcards and am very confident I have followed the instructions correctly.
The only thing I can think of is that as my phone was returned from being fixed only two weeks ago, they may have patched the kernal so even Goldcard will not work. Sigh, I might just have to wait for T-mo to pull their finger out with the 2.1 upgrade.
For what it's worth, Kernel version:
2.6.27-0078c992
Build : 2.73.110.26
Software version: 1.0.0.A6288

Kernel Version:
2.6.27-0078c992
[email protected] #821
Build Number:
2.73.110.26 cl#69351
Software Version
1.0.0.A6288
Bought and last updated in December 2009
Anyone with the same build etc that was able to gold card?

Thanks for this info.
Looks like it's the same. No-one with a goldcard in south london wants a little visit from me and my Hero ?!?

Chaps, I tried 3 times and on my fourth attempt I was successful, I used a 8GB Scandisk Card which worked. I gave up twice but eventually got lucky and it worked so I understand your frustration
It maybe worth uninstalling and re-installing your drivers, or you can try this:
USBDeview >> http://download.cnet.com/USBDeview/3000-2094_4-10614190.html, download and install
Whilst the phone is plugged in, open USB Deview, find all the htc drivers and delete them, after deleting them, disconnect your phone and plug it back in, drivers should re-install,
Try again with a different USB port on your machine, let me know how you get on

For the guys having problems with goldcards,....
Once you have made the changes to the SD, saved and closed the HEX editor,... re-open it again to make sure the changes have actually saved.
...... Alternatively,... Check to see if there are any differences in the tutorial from this thread, compared to the one here ---> [Guide] Newbie Guide to Install a Custom Rom [Updated 14/04]
Hope something there helps.

Maybe OS may be an issue,... Mine failed on Win7 64bit but worked 1st time with an XP machine.

Complete success!
Seems it was a problem with Win 7 (32-bit).
Worked first time in Vista with the stock 2gb card already created using Win 7 earlier.
Happily now enjoying a custom 2.1 Rom!
Angry yet again with M$.
So pleased I've moved to Ubuntu as my main OS.

I managed to get my goldcard work first time round, fortunately. I used a SanDisk 2Gb card, but curiously, I realised afterwards I forgot to format it, I still had all the hidden linux files (starting with a .) on it
I think all T-mobile branded hero's use the same firmware initially.
Also, I couldn't get the USB to work on Win7, had to go onto XP.
Finally, a guy at my work had the same problem, not being able to goldcard his Hero, I suggested to him, when he goes into the hex editor, include all off the offsets, like when you get down to 170, highlight all the way down to the right of that line.

drspikes said:
Complete success!
Seems it was a problem with Win 7 (32-bit).
Click to expand...
Click to collapse
Wahey!! Glad your sorted now.

I wasnt able to use either of my Win7 (32 or 64) to do this, but behold my daughters Netbook with XP was the winner!!! worked perfect..now...whats the best rom currently?

j_simon208 said:
I wasnt able to use either of my Win7 (32 or 64) to do this, but behold my daughters Netbook with XP was the winner!!! worked perfect..now...whats the best rom currently?
Click to expand...
Click to collapse
I highly recomend MCR3.2 (MoDaCo Custom ROM for GSM Hero) ,... Fast, stable,.... No complaints at all. I flashed this on the 1st day i got my HERO,... Now waiting for a stable Android 2.1 release,... Probably MCR4.0.

ddotpatel said:
I highly recomend MCR3.2 (MoDaCo Custom ROM for GSM Hero) ,... Fast, stable,.... No complaints at all. I flashed this on the 1st day i got my HERO,... Now waiting for a stable Android 2.1 release,... Probably MCR4.0.
Click to expand...
Click to collapse
I have to agree, modaco 3.2 is fantastic, even when memory is running low its still quick, Paul has done an excellent job, flashed the hero with modaco 3.2 as soon as it was rooted, havent tried anything else yet

akhtar1817 said:
I have to agree, modaco 3.2 is fantastic, even when memory is running low its still quick, Paul has done an excellent job
Click to expand...
Click to collapse
Definately,.... Has been just over 6 week with my Hero now and haven't felt the need to even try another ROM.

stucked when updating rom!

Basically now i am stucked...NEED Help!
i follow hugo guide XXX.askabouthugo.com/mobile-technology/powerful-android-phone-gphone-my-htc-magi
at first...then i create the goldcard. but then i was stuck at the flashing of europe rom. it cannot detect my phone. weird..
so i went on to follow unlocker guide but then i stuck on the
"
How To: Root Your MyTouch 3G / Magic (GoldCard Method)
Posted on: August 14, 2009
Posted in: Featured, Video
Comment on This Video
How To: Root Your MyTouch 3G / Magic (GoldCard Method)
Share This Page:
* Google Bookmarks
* Twitter
* Facebook
* LinkedIn
* email
* Print
* Digg
* del.icio.us
* Technorati
* Yahoo! Buzz
PART II VIDEO:
PLEASE NOTE! IF YOU HAVE A MyTouch 1.2 / Fender, STOP!
WE ARE DOING A NEW PROCEDURE JUST FOR YOU, HERE. USE THAT PROCEDURE INSTEAD OF THE ONE BELOW!
Before Beginning:
Have a SPARE memory card (2GB is perfect and relatively cheap) to use for the Goldcard procedure, do NOT use your normal everyday card as it will ONLY be a goldcard after we are done.
I. Setup ADB and Create a Goldcard
1. Just follow our new How To Create a Goldcard procedure and once you have finished it enitrely and have a working goldcard, come back to finish this procedure.
III. Root the MyTouch using the Goldcard
1. Download the Sappimg.zip file for your phone:
SappIMG.zip (for old MyTouch and all Magics)
Save the file to your computer, then save it to your goldcard (Do NOT rename it to anything, leave it as SappIMG.zip). Then take out your Goldcard from the computer.
2.. Take your original memory card (NOT YOUR GOLDCARD) and save whatever is on it to your computer as a backup before beginning.
3. Put the memory card into your phone (AGAIN NOT THE GOLDCARD).
4. With the memory card in your phone, click on Settings, SD and Phone storage, then click Unmount SD card. Once it unmounts, click Format SD card.
5. Plug the phone into the computer and mount the SD card so we can save a file to it.
6. Download the 1.33.2005 HBoot and save it to your newly formatted memory card, and then rename it to update.zip (windows sometimes just needs you to rename it update and if you still see the zip folder symbol next to the file that means that it is still update.zip even though it only shows update).
7. Turn off your phone once the update.zip file is on the memory card.
8. Take out the memory card from the phone and put in the Goldcard (all while the phone is still off).
9. Turn on the phone by hold down the Power and Volume Down button. When the screen comes to the rainbow (or skating android screen), it should automatically pick up the SappIMG.zip file and ask you to update. Go ahead and update (DO NOT INTERRUPT THIS PROCESS).
10. Once the flashing is COMPLETE. Then turn off the phone.
11. While the phone is off, take out the Goldcard and put in the regular SD card (the one with the update.zip file on it).
12. Turn on the phone while holding Back and Power until the Fastboot screen comes up.
13. Download Amon Ra’s Recovery Image and save it to the AndroidSDK\Tools folder on your computer.
14. Plug the phone into the computer (while still in fastboot mode).
15. Goto the Start menu type cmd into the run section of the start menu and hit enter to bring up the Command Prompt.
16. Type the following into the command dos prompt on the computer (the black screen with white letters that just opened) while the phone is connected through USB, hitting enter at the end of the line:
cd\
cd androidsdk\tools\
fastboot devices
17. You should see a serial number pop up and the word fastboot to the right of it. This means that your USB drviers are all set up correctly and you can continue. If you do NOT see this, then you need to start over or Google for how to set up the USB drivers correctly (this will help).
18. If it worked, type the following into the command prompt (with hitting enter at the end of the line):
fastboot boot recovery-RAv1.2.0H.img *the 0 in 1.2.0H is a Zero not an Oh"
i stuck on step 18 . I CANT find the "recovery-RAv1.20h.img"
so i am stuck dwn .. anyone could assist me? either by sending me the "recovery-RAv1.2.0H.img or teach me how to use hugo guide ! my computer (win7) can read my phone with no problem...but when i press install the htc europe rom. i cant! please assist.thanks in advance!!

http://forum.xda-developers.com/showthread.php?t=530492
get your recovery from the above thread. read the thread and choose the thread appropriate to your device. 1.20 refers to the version and that version has long been superseded.

forum.xda-developers.com/showthread.php?t=530492
get your recovery from the above thread. read the thread and choose the thread appropriate to your device. 1.20 refers to the version and that version has long been superseded.[/QUOTE]
oh thanks! but i tried the 1.7.0 it cant...it say access deny. i am using HTC magic SENSE UI 1.5 so i have to do it thru goldcard method..i try earlier version also cant. any advice?

Are you in fastboot mode? (power + back button)..
Also, make sure you download the right radio/spl/recovery.. There is old or new radio.. You check out this thread and download the right combination
http://forum.xda-developers.com/showthread.php?t=677045

I hate it when I get stucked too. I really hate it when I get stuckedededed. That really sucksisis

if you have HTC Sense UI i suppose you have a perfect SPL 1.76.0009 correct? If yes, use this method: http://forum.xda-developers.com/showthread.php?t=680359

Mod edit: not dev related, moved to general

[Q] Update questions (2.1) (2.2)

Hi forum - I updated my GT540Go to 2.1-update 1. V20a a few months ago using the kdz method and i think i rooted it, I have the superuser icon but some apps say i still need root access??? and would like to go to 2.2 openswift (newest version with most bugs fixed) with recovery and overclock.
Now when i connect to PC Suite IV it says i have an update available so my first question is what will it update my phone to if i do it?
I have now read/watched everything i can find about flashing to 2.2 but it all still looks too complicated, Is there a proper step by step guide anywhere that i can use with some confidence?
Please help me and others like me who are confused how to use ADB and SDK
Thanks.

Best to wait until OpenSwift is out of beta and is nearly complete then install. Really no point in upgrading now if you don't know how to do it.

I am a newb and managed to flash to 2.2 with a guide I found at the android forums. Would be happy to post it here if it might help.
Love the new rom its faster and aside from camera not saving pics and no screen calibrator it is fine.
Dave
Sent from my GT540 using xda app.

I would also be interested in a step by step guide as I have a z4 rooted phone using the Baltic 2.1 V20d kdz.
Sent from my GT540 using XDA App

cheryanne said:
I would also be interested in a step by step guide as I have a z4 rooted phone using the Balkan 2.1 V20d kdz.
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
This is a guide I followed from another forum, and posted elsewhere with some minor additions in case anyone had problems.
The guide is from a forum post at the android forums,it is NOT my work, the added bits are mostly what I have found from browsing here and from asking questions. While I can't be held liable if you mess your phone up having done so myself I thought this could helpa few people and save them searching various threads for answers so hope it helps
The guide
To install this ROM you need to have fastboot enabled on your phone. If you have Android 1.6/2.1 installed from LG, then fastboot is not enabled. I will explain how to enable fastboot on your phone (this involves re-flashing/replacing your currently installed firmware):
I am unable to post links yet so you will have to copy and paste the appropriate link into your browser replacing the ** with tt
KDZ Updater Carphone Warehouse Unlocked.zip can be downloaded at h**p://goo.gl/7aRTc - A link to a zip archive with all the files needed to flash to Android version 2.1 with fastboot (Carphone Warehouse Unlocked)
KDZ Updater Europe Open.zip can be downloaded at h**p://goo.gl/BOcYT - A link to a zip archive with all the files needed to flash toAndroid version 2.1 with fastboot (Europe Open)
Download the version that best applies to you, if you live in the UK, I'd recommend you download the Carphone Warehouse Unlocked version, whereas if you live in Europe, I'd recommend the Europe Open version (simple right? )
I live in the UK and used the open rom from Europe as the Carphone Warehouse rom would not install
Now, how to flash these versions; I'll explain in detail how to flash the ROM's from starting with backing up.
Instructions to install ROM with Fastboot:
1. Before you start, make sure you backup all your data by installing the z4root.1.3.0.apk file onto your phone, then open it and choose 'Permanent Root'. Your phone will root and reboot. Then go to the Market and install 'MyBackup Root', open it and do a backup of your apps and personal data (contacts, sms, call log etc.) Once this is done, go to Settings>SD Card and Phone Storage>Unmount SD Card, a notification in the notification bar should appear saying 'SD Card safe to remove'. Remove the battery cover and remove the SD card and store it in a safe place. Then continue to step 2.
2. Extract the .zip file you downloaded to your computer (e.g. your desktop). Open the folder and install MSXML 4.0 SP3 Parser (msxml.msi).
3. Once that has finished, install LGAndroidDriver_WHQL_ML_Ver1.0_All_Win7.exe which are the drivers so your computer will recognize your phone.
4. Next, open KDZ_FW_UPD.exe
(i) Change 'Type' to '3GQCT' *THIS IS A MUST, THE UPDATE WILL NOT WORK OTHERWISE AND YOU MAY BRICK YOUR PHONE*
(ii) Make sure 'PhoneMode' is set to 'DIAG'
(iii) Browse for the 'V20B_00+Fastboot.kdz' file.
5. Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and wait for the drivers to install for the phone.
6. Click 'Launch software update' and do not use your computer until the update is complete. The update will take roughly 10-20 mins to complete.
If you have a problem with this try a different rom, this guide offers two to choose from.
Instructions to install CyanogenMod:
Once the update is complete, your phone will reboot, what you need to do is power off the phone and whilst the phone is off, press and hold the 'Camera' button all the way ANDpower on the phone, make sure you hold the 'Camera' button. The phone will display the LG logo and disappear, then display a blank screen. The phone is now in fastboot mode!
Now you want to download this file: Flashing CyanogenMod.zip and extract it to a folder called 'Android' (without the quotes '') on the C: drive (you'll probably need to make this folder yourself.
1. Now open CMD with administrator privileges (Search for CMD in the start menu and right click on 'cmd' and click 'Run as Administrator' )
2. Connect the phone to your computer via USB cable and wait for the necessary drivers to install.
If when connected with a usb cable the computer says "waiting for device" and nothing else happens try installing the fastboot drivers. You can do this by going to the control panel of your pc, from the Windows start menu, opening the list of devices and where you see the one representing your phone (likely, as was the case with me, it will say android and have a yellow exclamation mark over it). Different versions of Windows do things slightly different but what you need to do is simply update the driver by choosing the icons properties box choosing UPDATE or INSTALL DRIVER and when asked pointing it to the folder where you unzipped the drivers.
3. Then go back to the cmd window and type:
Code:
cd C:\Android
(i) Then type:
Code:
fastboot.exe -w
(ii) Once that's completed, type:
Code:
fastboot.exe erase system
(iii) Once that's completed, type:
Code:
fastboot.exe flash system system.img
(iv) Once that's completed, type:
Code:
fastboot.exe flash boot boot.img
(v) Once that's completed, type:
Code:
fastboot.exe reboot
4. Your phone will now reboot with CyanogenMod 6.1.1 (Android 2.2.1). The first boot might take longer than a normal boot.
If your phone stays at a blank screen you simply forgot to do one of the above steps, in which case simply repeat them. It is likely if that happens that you simply forgot the flash boot image instruction.
5. You can now re-insert your SD card and go to Settings>SD Card and Phone Storage>Mount SD Card
Enjoy!
The instructions for flashing both the firmware with fastboot and flashing CyanogenMod are included in the zip archives called 'Readme'. I'll update the links so that you'll always have the most up to date version of CyanogenMod available for download, note that if you choose to update your phone you will loose all your data including apps etc. so backup before you update
And that, with a few comments added by myself, is the guide.
Once you have set your phone up the way you want power off your phone. Hold the HOME and POWER buttons down while the LG logo appears and you will see a menu appear on screen.
Using the volume down key to navigate the different menu choices, and the camera button to select an option choose the BACKUP OR RESTORE option and from the sub menu that it will give you choose BACKUP.
This will make a backup of your phone AND all your data, if you ever mess up an update or think you have damaged your phone in the future simply holdthe POWER and HOME buttons down and when the menu appears choose the RESTORE option

Perfect.
Sent from my GT540 using Tapatalk

Thank you MisterMentallity
Sent from my GT540 using XDA Premium App

Fastboot is not detecting my device on windows 7
hi ,
i have try to update my device LG GT540 to 2.2 Android OS using fastboot.exe , but its not finding my device . it saying "wating for device " can you please anyone help me
i am using windows 7 64bit.
Thanks
Jega

jega_ms said:
hi ,
i have try to update my device LG GT540 to 2.2 Android OS using fastboot.exe , but its not finding my device . it saying "wating for device " can you please anyone help me
i am using windows 7 64bit.
Thanks
Jega
Click to expand...
Click to collapse
Have u installed the drivers properly?
Sent from my GT540 using XDA Premium App

[GUIDE] Rooting HTC Wildfire (Froyo)

THIS GUIDE WILL HELP YOU ROOT ANY WILDFIRE WITH HBOOT VERSION 1.01.0001/1.01.0002
This guide is in fact a combination of two other guides:
http://forum.xda-developers.com/showthread.php?t=1145035
http://forum.xda-developers.com/showthread.php?t=1130044
I take no responsibility for whatever may happen to your phone.
To root, you first need to gain S-OFF, this part is taken from the first thread.
So here we go,
- Before doing anything, make sure you have the latest HTC SYNC on your PC (get it from here).
- Connect your phone to PC and sync all your data (contacts, media, docs...etc.)
- Disconnect your phone, then uninstall HTC SYNC, but you must leave the drivers on your PC.
(i.e. Uninstall the htc sync program only, not the drivers)
S-OFFing the Device
Downgrade to HTC Froyo WWE for AlphaRevX "now named: Revolutionary" (HBOOT 1.01.0001)
It has been confirmed that AlphaRevX "Revolutionary" tool is not S-OFFing wildfire (buzz) 2.2.1, with HBOOT 1.01.0002!
Therefore, downgrading the HBOOT to 1.01.0001 is must for the meantime, to get an efficient S-OFF.
Lots of people seem to be having issues when trying to downgrade their Wildfire from a carrier-branded version (HBOOT 1.01.0002) to unbranded WWE (HBOOT 1.01.0001).
So, here’s a small package to help you do this.
click here.
If you have HBOOT 1.01.0001, you can skip to the step entitled Revolutionary
Extract this package somewhere you can find it, like your “Desktop” for example.
Step 1: run step1.bat from the package. This will downgrade your MISC partition to allow for the RUU downgrade.
At the end, GoldCardTool will start up, to allow you to create a goldcard which you will need before starting Step 2.
How to deal with Gold-Card Tool:
1. Switch off your phone, remove your microSD card.
2. Insert the microSD card into your card reader, connect it to your computer and format the card to FAT32 file system.
3. Insert the card into your HTC Wildfire and power it on.
4. Make sure USB Debugging is enabled on your phone in Menu > Settings > Applications > Development.
5. Connect the phone to your computer via USB and set the mode to charge only.
6. Launch Gold-Card Tool on your computer and click ‘GetCID’.
7. Copy the CID code from the text box and click the link shown below that text box to open it in your browser window.
8. In the browser window, enter all the details required and submit that form.
9. You should now get an email from PSAS. Open it and download the ‘GoldCard.img’ attachment.
10. Now set your phone’s USB mode to Mass Storage.
11. In Gold-Card Tool, click ‘Refresh’.
12. Select your mounted SD card from the drop-down menu saying “HTC MMC:”
13. Click ‘Load Goldcard.img’ and select the file downloaded in Step 11.
14. Click ‘Patch MMC’ and your Gold Card will be created. You may exit Gold Card Tool once done.
After you've made the goldcard, and patched it, continue with step 2.
• Step 2: run step2.bat from the package. This will downgrade your ROM version to HTC WWE Froyo for Wildfire (unbranded).
If you get a Customer ID error while doing this, your goldcard is not working!
Create a new goldcard and re-run step2.
Revolutionary
* Steps:
1st You need to get to: http://revolutionary.io/ to download the tool, and to get your “beta key” which you’ll get in a pop-up window in the same download page after you click the download link for (windows version).
The “beta key” is a must; the tool won’t work without it!
You’ll be asked to provide your phone “serial no.”, typically it should be something like HTXXETDXXXXX, and you can get it from:
Settings --> about phone --> phone identity.
Now, do the following:
1. Run latest version of HTC Sync on your PC and connect phone in HTC Sync mode and sync all your files. Remove HTC Sync and not the drivers.
2. Reboot phone.
3. Settings->Applications->Development->Check “USB Debugging”.
4. Run Revolutionary and connect phone to PC in “Charge Only mode”.
5. Revolutionary should recognize your phone and show your Device Serial number.
7. Type out the “key” in the Revolutionary tool software, keeping in mind the upper and lower case letters and press enter (you can copy / paste the key).
8. Revolutionary should start doing its job and you’ll get S-OFF in less than 90 seconds.
9. If it takes longer, just wait for the 15 minutes mark, if nothing, then reboot phone and retry.
(Some members got S-OFF after multiple tries)
Now, to get to actually rooting the phone by installing clockworkmod and subsequently, the superuser app.
1. Ensure that your SD Card is FAT32 then copy this to the root of your SD card: http://forum.xda-developers.com/attachment.php?attachmentid=548407&d=1300751790
2. Go into HBOOT(switch off phone and switch on while holding down the volume down button) and click yes when it asks you to update
3. Remove the img file from your sd card and add this file: http://bit.ly/su2361ef
4. Go into HBOOT and click Recovery!
5. Click install zip from sdcard (or some thing like that) (Protip: Navigate in the recovery with the trackpad, not the power button!)
6. Click choose zip from sdcard
7. Locate your zip and let it update
8. Boot into your now rooted phone and install ROM Manager from the market.
9. Open ROM manager and Install Clockword Mod recovery (or sth like that) twice in a row (this is important to ensure proper installation)
YOU ARE NOW ROOT!!!!
Optional: Use ROM manager to install CyanogenMod or another ROM of your choosing

this dont work for me i tried many times.... when i try step 2.bat , cmd pops up does a **** load of codes then closes instantly?

gagan313 said:
this dont work for me i tried many times.... when i try step 2.bat , cmd pops up does a **** load of codes then closes instantly?
Click to expand...
Click to collapse
Firstly, were you even on HBOOT version 1.01.0002?
If you were, check if the downgrade was successful after running step2.bat
If it wasn't make sure HTC Sync has been uninstalled but the drivers have not
If the drivers are in place, I suggest looking for a solution at the orginal guide found at http://forum.xda-developers.com/showthread.php?t=1145035

nope i have 1.01.0002 and step 1 does its stuff no problem then goldcard automatically starts up no problem with that and i patched it and everything then step2.bat comes up and starts downgrade but like its doing a bit and just closes instantly back to hboot still showing s-on 1.01.0002????
i h ave windows 7 ultimate 64 bit../??? any help?

gagan313 said:
nope i have 1.01.0002 and step 1 does its stuff no problem then goldcard automatically starts up no problem with that and i patched it and everything then step2.bat comes up and starts downgrade but like its doing a bit and just closes instantly back to hboot still showing s-on 1.01.0002????
i h ave windows 7 ultimate 64 bit../??? any help?
Click to expand...
Click to collapse
Try making a new goldcard and try again.
And are you sure USB debugging is on?

i did.... but i just need to know..
does it work on windows vista 32 bit or windows 7 64 bit or like linux 64 bit.??

please watch this and please tell me if im doing anything wrong......
http://www.youtube.com/watch?feature=player_embedded&v=e7N1XIkdG2M
p.s sorry for poor quality...;(

gagan313 said:
please watch this and please tell me if im doing anything wrong......
http://www.youtube.com/watch?feature=player_embedded&v=e7N1XIkdG2M
p.s sorry for poor quality...;(
Click to expand...
Click to collapse
The first instruction tells you to switch off the phone before removing the SD card.
Try it again.
If it doesnt work, run everything as administrator, else, go to the orginal thread and post your problems there

im running it on windows 7 ultimate 64 bit??? does that make any difference??/

gagan313 said:
im running it on windows 7 ultimate 64 bit??? does that make any difference??/
Click to expand...
Click to collapse
Shouldn't.... but I did it on a XP 32 bit so maybe you could try running in compatibility mode...

i tried that but no luck..... i also tried on my windows vista 32bit with no luck

Finally got this process to work for me after numerous unsuccessful attempt. Main problem was I was using Win7. Switched to Win 3.1 and things worked.
Also in the guide the step
7. Copy the CID code from the text box
Need to me clarified to ... "Copy the reversed CID code from the text box "
After that all good and am now back on Hboot 1.01.0001.
Thanks for the guide.

Like a charm. Thanks.

Thanks for the information

CWM Issue
Hi,
I need help regarding clock work mod recovery.....
I have rooted my phone successfully bt I am facing issue with CWM ie whenever I am trying to go to recovery-> install zip from sd card, my card contents doesn't pop up, instead only the symbol of CWM is displayed...
please help..

Rahul2929 said:
Hi,
I need help regarding clock work mod recovery.....
I have rooted my phone successfully bt I am facing issue with CWM ie whenever I am trying to go to recovery-> install zip from sd card, my card contents doesn't pop up, instead only the symbol of CWM is displayed...
please help..
Click to expand...
Click to collapse
make sure that you're using the proper controls...:
After boot you select items by vol keys and choose by hitting the power button.
In CWM you also select by vol keys but choose by hitting trackball
Have you done so?

thank u very much it did work....
bt I am stuck with a new issue....I was installing a custom rom and my phone is stuck in the htc window and is not booting up.
can u recommend any solution for it..

Rahul2929 said:
thank u very much it did work....
bt I am stuck with a new issue....I was installing a custom rom and my phone is stuck in the htc window and is not booting up.
can u recommend any solution for it..
Click to expand...
Click to collapse
At first boot it might take a while to boot up. If it remains stuck on the logo I'd suggest to reinstall but do a "full wipe/factory reset" from inside ClockworkMod (even better format system and data before).
BTW Which ROM are you trying to install?

Thank u very much for ur help....I appreciate u people very much....
Bt actually that rom was not good that's y I was facing that issue
Sent from my HTC Wildfire S A510e using xda premium

IF YOU HAVE PROBLEMS WITH CMD and are on Windows 7 (or similar), make sure you start CMD in admin mode.
Otherwise it doesn't work.
1- Make sure the files are stored in a folder in C:\ (or somewhere very short unless you know command line). For example: C:\goldcard
Copy the files from the folder they came in and throw them in there.
2- Go to start and write CMD. Now DO NOT single click the program or type enter. Instead do CONTROL+SHIFT+ENTER
This opens it in Admin mode. (some pop up confirmation may appear).
3- Navigate to the folder by writing "cd C:\goldcard". (Without the quotation marks of course. Use the name of the folder you created in step number one.)
4- write step1.bat
That should do it. The same applies to step2.