Hi, i have problems witch 5 buttons hardware HTC HD mini.
too sensitive!!!
My question:
Can i reduce sensitivity via reg?
Alternatively I could put the tape over the buttons?
Advise pls
;-)
Buscio said:
Hi, i have problems witch 5 buttons hardware HTC HD mini.
too sensitive!!!
My question:
Can i reduce sensitivity via reg?
Alternatively I could put the tape over the buttons?
Advise pls
;-)
Click to expand...
Click to collapse
Try BsB tweaks, there's a tweak for this which should also affect this area of the screen
cparisis said:
Try BsB tweaks, there's a tweak for this which should also affect this area of the screen
Click to expand...
Click to collapse
...no
:,-(
For me, i focus on adapting to a new habit. Being careful when touching the bottom part of the phone. Just try not to wrap your palm around the phone.
Related
I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.
dkleuven said:
I would like some help.
Part of my Prophet screen doesn't work anymore.
This means aligning is hell.
I would like to squeeze some more life out of the thing ...
Especially with guys like Gullum, Cloudifa, and all the other ones ...
I have already found out the registry key is
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
I have only found values for elf, atom and others on the net.
But they are not yet as close to Prophet (atom is OK except for the far right side of the screen (scroll ...)
Could someone please be able to give me the values on their prophet ?
Want to post it instead of messaging directly to keep this on the forum for others.
If I should have missed an earlies posting woth the settings, sorry, please then redirect me.
Click to expand...
Click to collapse
These values are unique to each device. If every device was the same, there would be no need for this!
From my ROM setup: 1839,1997 3118,684 3126,3328 577,3291 602,690
Thanks !
I know about the unique settings, but with your prophet settings I can try to come closer thn woth settings fora completely different device, and maybe tweak a bit more myself through remot registry editor.
Thanks again!
HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings
1942,1963 3228,622 3197,3268 664,3267 675,653
Device G3
Rui
pls help me.... pls
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?
jhonnyyy said:
were i found this "HKLM\HARDWARE\DEVICEMAP\TOUCH\Calibration settings'' ?
Click to expand...
Click to collapse
You need a registry editor. If you just want to realign the screen, hold the windows hardware button and then press the centre d-pad button.
salll
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???
jhonnyyy said:
tnx...but my PDA doesn't allow to finish the align screen process, one of the corners i can't align it...maybe phisical problem???
Click to expand...
Click to collapse
Maybe a hardware issue...
Try using a registry editor (I'd use this) to edit the settings using those above... May not be perfect but may help....
Hello Guys, im looking this QVGA phonecanvas with this 2 integrated:
1) Slide to answer (New htc version)
2) Slide to view buttons.
Photos attached.
Thanks!
jeremy89632 said:
Hello Guys, im looking this QVGA phonecanvas with this 2 integrated:
1) Slide to answer (New htc version)
2) Slide to view buttons.
Photos attached.
Thanks!
Click to expand...
Click to collapse
http://mbarvian.freehostia.com/2008...de-applications-cab-and-oem-package-included/
andriej1974 said:
http://mbarvian.freehostia.com/2008...de-applications-cab-and-oem-package-included/
Click to expand...
Click to collapse
That's just standard Opal Dialer what the OP wants is a hybrid of the Opal and Iolite, problem is that you can't just switch graphics because one has slider lower than the other & the silence in different position etc.
Hope someone will take the opertunity as i'd like this too as prefer the big silence and graphics layout but have big ears so need the curtain
Yeah, I hate it!
Sometimes I have to tell the person on another line ..
" hey ! if i put down, call me back, my touch screen loves sensitivity '
stylez said:
That's just standard Opal Dialer what the OP wants is a hybrid of the Opal and Iolite, problem is that you can't just switch graphics because one has slider lower than the other & the silence in different position etc.
Hope someone will take the opertunity as i'd like this too as prefer the big silence and graphics layout but have big ears so need the curtain
Click to expand...
Click to collapse
LOL Judging by your avitar I didn't think ears were a problem for you. Just kidding. That would be sweet to have this though.
I instaled cabs by mbarvian, and i got fullworking slide to answer and slide to unblock.
but there is no, mute ring bar.
jeremy89632 said:
but there is no, mute ring bar.
Click to expand...
Click to collapse
Yeah i'm with you there also the layout on graphics is better
Please someone hybrid this dialer
This is the dialler they are porting to vga wait till that is fully working then you might stand a chance of getting this for qvga
jeremy89632 said:
Hello Guys, im looking this QVGA phonecanvas with this 2 integrated:
1) Slide to answer (New htc version)
2) Slide to view buttons.
Photos attached.
Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=477670
but it's skinned
What is the differentes between the Opal Phone above with Phone Canvas ?
thangkls said:
What is the differentes between the Opal Phone above with Phone Canvas ?
Click to expand...
Click to collapse
Slide to answer I think!
ishanISCOOOL said:
http://forum.xda-developers.com/showthread.php?t=477670
but it's skinned
Click to expand...
Click to collapse
The QVGA version is the normal Opal Dialer "I thought for a while back it was what you thought due to images so downloaded extracted .cab and the graphics are old Opal not Iolite with Curtain"
Hi,
Wonder if someone can give me a quick answer to this problem...basically when I make a call the screen automaticaly turns off after a few seconds until a hardware button is pressed...is there anyway to turn off this feature? Just that I want pocketshield to completely control the way the screen turns on/off during calls? A registry edit perhaps?
Thanks
HD Tweak (http://montecristoff.webs.com/hdtweak.htm) will sort that out for you. It's one of the first options.
hi,
look to this prog,
http://forum.xda-developers.com/showthread.php?t=488991
have fun
I've got HD Tweak but changing the settings for sleep to off doesn't make any difference.
Also have Touch In call tweak - its a good program but would prefer not to use too many programs and if pocketshield can do the same thing I'd prefer that.
I'm using Duttys 6.1 ROM is this anything doing with HD tweak not working? Does anyone know the registry key to change the screen going to sleep on making a call?
Thanks
disable light sensor
Can anyone help with the registry edits to disable the light sensor.
thanks
grantus said:
Can anyone help with the registry edits to disable the light sensor.
thanks
Click to expand...
Click to collapse
Code:
HKCU\ControlPanel\AllLEDMgr\LightSensorPollingEnable
Worked fine, thanks for the help.
egoist6 said:
Code:
HKCU\ControlPanel\AllLEDMgr\LightSensorPollingEnable
Click to expand...
Click to collapse
how do i go to registry edits??
j.o.i.d said:
how do i go to registry edits??
Click to expand...
Click to collapse
Use your registry editor regedit.exe, should be one already on your rom. If not on your apps list try in /windows
egoist6 said:
disable light sensor
Click to expand...
Click to collapse
will this tip affect only while on call?
thx
I use:
Touch_InCall_Screen_Tweak v1.1.2.CAB
When holding the HD vertical the screen is dark en doesn't react to touching.
When you hold your HD horizontal the screen is active and can be used as normal.
This works only when a call is active.
Good luck!
(same advice as rambo12345)
I own a HTC Touch HD.
I often use my phone in my car to navigate and place the phone onto the dashboard.
I recognized that theres a heavy reflection on the windscreen at night.
It would be nice to use that as kind of a head-up-display, u know?
the problem is, that the image is wrong, it has to be flipped.
So, is there a porgramm to flip and rotate the phone screen?
normal:
That how it should be (faked it with paint )
thx for your help
Come on guys
greetz
schlitzohr1812 said:
Come on guys
greetz
Click to expand...
Click to collapse
There's already apps that do that. Try searching again.
Also, try Gyrator (http://thewingster.com/gyrator.aspx) and see if you can tweak the settings so that when the phone is tilted that way, it actually flips the screen the other way!
I think you could do it with Gyrator, since there's some good settings to tweak in there.
will try that.
of course, rotating the screen is no problem.
to tilt / flip it is the prob.
I'll test gyrator now.
thx
greetz
//Edit: I don't get how to tilt / flip the image wioth gyrator...
schlitzohr1812 said:
will try that.
of course, rotating the screen is no problem.
to tilt / flip it is the prob.
I'll test gyrator now.
thx
greetz
//Edit: I don't get how to tilt / flip the image wioth gyrator...
Click to expand...
Click to collapse
Idk, looks like its not possible through Gyrator. Maybe there's another app, but I gotta go to school.
Nobody?
I understand you what u mean Dude
You dont neet ot rotate the screen with Gyrator you need a MIRROR EFFECT
You need to rotate the screen with Mirror effect and i don`t know for now any app that can do this.
Maybe you need to ask some dev.. to create something like this...
All the Apps that Rotate the screen will not help you because on your car window on the night you always will see not the actual Image and will get confused... the RIght will be left and etc
So better edit your post and write that you are looking for a MIRROR EFFECT FLIP
Yeah, u got what i mean
Will edit post.
hihi, i am new here..
my hd2 touch screen sensitive, its just change touch screen glass digitizer can solve the problem? or have any good rom to solve this problem? i have install a application to reduce the sensitive, it's quite good for typing.. but sometime the problem still have. any good solution? thanks alot
hey welcome aboard, its prett simple actually , theres alot of reg edits out there to increase and decrease the sensitivity, but a simple way to decrease the sensitivity is by downloading and installing bsbtweaks which is avaliable here http://forum.xda-developers.com/showthread.php?t=589305 . and once thats isntalled scroll down a little untill u find the option that says decrease screen sensitivity