Soft Keys Backlight Timeout - Vibrant General

Is there any way to adjust the timeout? These drive me crazy. Mine stay on for about 3 sec. I've figured out if I touch the screen first they'll come back alive but that's annoying. Most of the time I'm just stabbing in the dark and almost always miss the button on the first try. It would be nice if you could either adjust the time or they stayed on as long as the screen was on or even had a toggle to make that an option. Thanks!

Related

Strange on new JasJar - no Keyboard backlight

Maybe I do something wrong. Doesnt work on Aoto or Manual. Pls help.
Thx
Saar
Did you check the keyboard settings ?
(in Settings/Personal/Buttons see the last tab called Backlight)
Is it dark when you try and use it? the light won't come on unless the ambient light level is low!
Thanks Tekflow,
Yes I did in both positions, auto and disable auto.
It pisses me off.... the JJ is brand new out of the box, I kindda hoped I'm stupid and I just don't know how to handle it...:-(
Best,
Saar
KB Backlight
Hi Tintoy,
Yes tried it even in complete darknes, but if you disable the Auto KB backlight sensor, there is suppossed to be a KB BL manual button (user manual pg 10, button # 5). Tried both sits. Nada.
Thank you,
Saar
Is it a hardware defect? On my MDP Pro it works very well.
Sounds like a hardware problem, doesn't it? Off to the service centre...
KB BL
Hi guys, faulse alarm, I'm standing in the corner.... It does work but in its own logic, ...only when you actually press a key. I've expected that it should be on/off once the sensor dictates it's dark. Probably my own logic is faulty as I guess it could suck up the battery juice.. anyway, all's OK, thx .
Best,
Saar
that's good news ....
What I did is the following: I unchecked the "Enable Keyboard ..." and put the time to 10 sec for "Turn off if not used...".
So each time I press a key on the keyboard, it illuminates: I found this useful even in full day time in order to see clearly the signs in red. On another hand I did not notice really a significant difference in battery life.
What I did is the following: I unchecked the "Enable Keyboard ..." and put the time to 10 sec for "Turn off if not used...".
So each time I press a key on the keyboard, it illuminates: I found this useful even in full day time in order to see clearly the signs in red. On another hand I did not notice really a significant difference in battery life.
What would be preferable to losing the cool auto-sensor altogether is a reg hack to adjust the amount of darkness that triggers the sensor. It's set waaaaay too dark at the moment, and needs to come on in less dark surroundings. Any ideas?
I to have a exec, and have the keyboard back light set to come on when i push a key, but what is the button next to the voluse slider for as it dose nothing
Thanks
John
If the screen backlight times out, pressing that button turns the backlight back on again. This avoids you having to tap the screen or press a key thus accidentally selecting something you didn't wanna do!
OH! thanks for the info on the button, But i have my screen and backligh both set for 5 mins so asume this buton would be needed if you set the screen to turn off after say 5 mins but the backlight to go off after 30 seconds?
Thanks
John

Backlight resetting to minimum when device switched on

For some reason my device has suddenly started switching to the minimum backlight setting whenever it's switched on. If I go to the backlight settings and then adjust the slider it will stay at the selected brightness until it switches off. When it switches back on again it's at minimum brightness and I can hardly see the screen!
This started happening after I installed and then removed PocketZenPhone.
I don't really want to hard-reset the device unless I absolutely have to - does anyone know what registry key sets the default switch-on brightness?
Thanks,
I dont have the solution but I have had the same problem intermittently. Can be really aggravating in the dark because it can be hard to get to the proper screen to increase the backlight. Hasnt happened in a while. Have not been able to figure out what triggers it. Have not installed PocketZenPHone. Curious if anyone has an explanation.
yah, i've noticed this to, sometimes i'll hit the power button to take it off standby and the backlight would be off. first couple of times it scared the hell out of me cuz i thought the screen had broke or burnt out.
also i noticed the version of spb pocket plus i'm using (3.04 build 4195) doesnt adjust the backlight brightness.
Now that you mention it. the SPB Pocket plus backlight does not work for me either. Strange...
Well I think I've managed to "fix" this by setting the following;
Backlight Settings:
On battery power, turn off backlight if device is not used for [5 min]
Turn on backlight when a button is pressed or the screen is tapped
Power Settings
On battery power: Turn off device if not used for [3 minutes]
I think the key thing here is to have the device auto-switch-off BEFORE the backlight timer kicks in. Since setting the above three settings I have not had the same problem again.
Ill give it a try as well.
Hmm...maybe someone can help me. One day, my backlight timer settings when the PDA's not plugged in reset to 10 seconds (in the registry it has it as 7 seconds). I'll go in and change it to 2 minutes (the original setting I had it at), but the minute I turn it off, it resets back again to the 10 seconds setting. I even tried going into the registry and changing it, and it resets it back to 10 seconds. I suspect it may have something to do with an entry in the "scheduled tasks" but it looks like a complete mess. Is there some kind of scheduled tasks cleanup utility?
Thanks,
Q
hello i have the same problem using phothet with WM6
Thanks
Nicolas
I had the same problem often about 15 months ago - it happened often each day.
I posted herw but had no joy with a solution - but then found one on Modoco (i was looking about March/April 2006).
Even with that - it has still done if perhaps five or six times since - and basically makes the phone unusuable if it happens somewhere or time with poor light.
My KJam backlight keeps changing by itself to dark
Suddenly my KJam backlight always turns to low without me doing so, then I have to change it to high, barely can see what I’m doing as it is almost black. This is kept happening especially after I installed Pocketweather. I reinstalled the Rom, it worked fine then suddenly it is back again when I switch the screen off, or automatically it is switched off, the backlight slider I find it at the lowest end.
Why thus is happening, it’s driving me crazy, please help me

Screen dims after few minutes of inactivity

No matter what I set in Settings -> Power, screen dims after a (short) while of inactivity both on battery or power. I had similar issue sometimes with my Elf. I just had to check those boxes and uncheck them and press OK, sometimes I had to restart it. But it never worked with my HD. It always dims backlight after some inactivity no matter what I set in power settings. I want to have backlight on full power (according to L-sensor) all the time even if I don't touch it for hours. It's really annoying to tap screen every minute when reading something because it dims.
mcano said:
No matter what I set in Settings -> Power, screen dims after a (short) while of inactivity both on battery or power. I had similar issue sometimes with my Elf. I just had to check those boxes and uncheck them and press OK, sometimes I had to restart it. But it never worked with my HD. It always dims backlight after some inactivity no matter what I set in power settings. I want to have backlight on full power (according to L-sensor) all the time even if I don't touch it for hours. It's really annoying to tap screen every minute when reading something because it dims.
Click to expand...
Click to collapse
did you install any extra software? could be some conflicting settings/registry entries
buggybug0 said:
did you install any extra software? could be some conflicting settings/registry entries
Click to expand...
Click to collapse
I remember it was like that out of box ;-( but the time was longer, now it dims after one minute.
I've got the same problem. Very frustrating indeed.
Onel
I unchecked the "Turn off backlight if device is not used for x sec" and the phone never dims, so it seems to be a problem in your devices/software only.

How to disable phone dim before it goes to sleep?

After using my S4 phone, when I leave the phone alone, it will stay at normal brightness for a while then it will dim (lower brightness) for about 5 seconds then the whole screen will turn black (sleep).
I want to disable the dim. How can I do it? I want it from normal brightness to turn black (sleep).
Thanks
(It is irritating during the dim because I can only press the screen to make phone to return to normal brightness and I tend to press wrong stuff as screen is dimmed, or no empty area to press. Anything pressed on screen will still take effect but I actually do not want to press anything. When it is black I can use power key to turn on again to normal brightness without pressing screen.)
Anyone know?
alearn said:
Anyone know?
Click to expand...
Click to collapse
Settings>dispay>screen timeout there you go.
deakodude said:
Settings>dispay>screen timeout there you go.
Click to expand...
Click to collapse
It does not work. That does not affect the dimming time. The dim I am talking about is the 5 seconds just before the screen turn black
alearn said:
It does not work. That does not affect the dimming time. The dim I am talking about is the 5 seconds just before the screen turn black
Click to expand...
Click to collapse
Do you want the display to stay on is that what you are asking?
deakodude said:
Do you want the display to stay on is that what you are asking?
Click to expand...
Click to collapse
I think he just wants to set the dimming duration to zero. But yea I don't really see any sense in this...
Why don't you just turn off the screen timeout as deakodude said? If not, even if the screen is dimmed, there is always a way to bring the screen back to "full brightness" (ex. by touching two times the menu button or just swiping across the screen, which usually won't trigger any actions).
BoroChief said:
I think he just wants to set the dimming duration to zero. But yea I don't really see any sense in this...
Why don't you just turn off the screen timeout as deakodude said? If not, even if the screen is dimmed, there is always a way to bring the screen back to "full brightness" (ex. by touching two times the menu button or just swiping across the screen, which usually won't trigger any actions).
Click to expand...
Click to collapse
I do not want to turn off screen timeout as I am happy to read the screen and then let it on for some seconds then shut down.
Read this and it will make sense: It is irritating during the dim because I can only press the screen to make phone to return to normal brightness and I tend to press wrong stuff as screen is dimmed, or no empty area to press. Anything pressed on screen will still take effect but I actually do not want to press anything. When it is black I can use power key to turn on again to normal brightness without pressing screen. Sometimes I am still reading message/map when the screen dims.
"by touching two times the menu button" > this is correct, but it is troublesome
"just swiping across the screen, which usually won't trigger any actions"> this is wrong. During the dim, anything key or anything on screen touched is still working as normal.
Please note: As stated in the thread clearly. Dim I am talking about is the 5 seconds that is lower brightness than usual, it happens just before the screen turns completely black. After using your phone, leave your phone alone untouched and look at the screen until it turns black, you will sure see it.

[Q] Lock screen lag

Hello xda, I updated to latest lollipop BOC3, when I press lock button, screen lags at locking, It is not a big problem but it drives me crazy. and although when I press home/lock to wake up phone captivate buttons flicker and then screen turnes on (buttons are always turned off) I think this is hardware problem because searched at forum and no threats... anyone has that problem ? sm-n910 c 5.0.1
guys
alexowen said:
Hello xda, I updated to latest lollipop BOC3, when I press lock button, screen lags at locking, It is not a big problem but it drives me crazy. and although when I press home/lock to wake up phone captivate buttons flicker and then screen turnes on (buttons are always turned off) I think this is hardware problem because searched at forum and no threats... anyone has that problem ? sm-n910 c 5.0.1
Click to expand...
Click to collapse
Maybe your buttons are always off because you have it disabled in settings...Go to Settings/Display and wallpaper/Touch key light duration and set it to whatever time you like...
Ashatar said:
Maybe your buttons are always off because you have it disabled in settings...Go to Settings/Display and wallpaper/Touch key light duration and set it to whatever time you like...
Click to expand...
Click to collapse
yes I have disabled lights because I dont like it, it irritates me when i oress button first flickers captivate buttons and then screen turnes on, although that lock screen lag -_-
alexowen said:
yes I have disabled lights because I dont like it, it irritates me when i oress button first flickers captivate buttons and then screen turnes on, although that lock screen lag -_-
Click to expand...
Click to collapse
Well then I don't see a problem here...unless your capacitive buttons turn on even though you set them to "Always off" ? The lock screen lag is there, but it isn't that noticeable to me.Sometimes it is, but rarely...
Our you referring to the faint flicker of the captivate buttons even with the setting off,I turned mine off but can see a faint flicker when waking phone up.
I take it no one else has this issue?
@alexowen @Raver27 @Ashatar I have same problem guys, captivate button flickers even when it is turned off when I wake my phone and second problem on LP is lockscreen lag which irritates me, when I lock screen first brightness goes down and then screen turnes off, this is hardware problem not software
I like the capacitive button lights, like it so much i set the time for: 6seconds before dimming. Tho i can understand if it flickers on n off instead of just an on, i would want it off too. The lag on the lockscreen must be like 2-3 seconds? i dont have ir on mine. It's like 1 seconds, which is nothing.

Resources