Related
Hi. A week ago I had no clue about any of this so I'm definitely a noob. I wanted to say thanks to everyone on this site who have contributed to the software, who've made guides, and who have answered questions. Special thanks to kinfauns for his Beginner's Guide and his Howto Root, etc. I had already started taking notes and piecing together definitions of the various parts of this process when I found his guide and fell over in worship. Also big thanks to Jcase for his 6.3 root guide, which gave me confidence in the procedure for rooting my 6.3.2 KF. I must also extend my gratitude to Thepooch for maintaining his Index of links for the KF. Unfortunately, I found this later rather than sooner, but it was an immense help anyway. Pokey9000, ChainsDD, TWRP, the CryanogenMod team, and Hashcode deserve thanks and recognition for their development and maintenance of software. (Links to each of these pages in next post.)
My story is that from the first day I bought the KF I had planned on ditching Amazon's crappy OS, but I just didn't have time or get around to it for years. I finally got googling the other day. I saw some simple directions, but not knowing what certain things did I wasn't willing to go running programs or commands on my computer and KF without having a better understanding and trust in the authors' instructions, so I kept reading. As I always do with complicated procedures that I'll probably forget by the time I do it a second time, I began taking some fairly detailed notes, especially on procedures. When I felt knowledgeable enough, I gave it a go and had only a minor hiccup. In the spirit of helping, I'm posting those notes here for others to use.
Experts, if you care to please feel free to correct anything you see that is wrong, or make suggestions. I'll probably incorporate some corrections, but I doubt I'll maintain this for too long. In other words, read the comments, people.
Noobs, please be aware that this is in no way a fully proper and tested procedure, nor is it in any way definitive. It is merely the things I learned starting from zero and getting to the point where I was comfortable enough to move forward. So keep this in mind. It does, however, also include many of the links and sources for my information, which should also help people make their own determination on things when it's clear I'm speculating. It also extends beyond the setup process into discussing apps a bit, which should be helpful for the complete noob like me.
###############################################
##### Android / Kindle Fire Rooting and Romming #####
###############################################
Read this (skip the windows driver section, but check out the section after that for fastboot and adb commands):
----- http://forum.xda-developers.com/showthread.php?t=1552547
And then this:
----- http://forum.xda-developers.com/showthread.php?t=1638452
And then note this for v6.3:
----- http://forum.xda-developers.com/showthread.php?t=1568340
And here is the repository for links to ROMs (including stocks), bootloaders, recoveries, et al.
----- http://forum.xda-developers.com/showthread.php?t=1859851
FYI: The Kindle Fire uses the ARM architecture in an TI OMAP 4430 chip.
----- http://www.zdnet.com/blog/hardware/inside-the-kindle-fire-processor/16317
----- The OMAP 4430 is a dual-core ARM A9 part clocked at 1GHz built using 45nm CMOS process. It features Symmetric Multiprocessing (SMP) and an integrated POWERVR SGX540 graphics accelerator (supporting OpenGL ES v2.0, OpenGL ES v1.1, OpenVG v1.1 and EGL v1.3) for 3D games and UI. It also features IVA 3 hardware accelerators to allow full HD 1080p video encode/decode. The chip also features on-board USB 2.0 support.
----- FYI: The 1st-generation Kindle Fire (which I have) is 'codenamed' Otter. The 2nd-gen is Otter2.
----- ----- http://wiki.cyanogenmod.org/w/Otter_Info
###################
#### Key Terms #####
###################
ADB (Android Debug Bridge) - Communicate with and control an Android-powered device over a USB link from a computer; part of the Android SDK; has a client, server, and daemon.
----- http://www.androidauthority.com/about-android-debug-bridge-adb-21510/
Code:
./adb help
Fastboot - A diagnostic and engineering protocol that you can boot your Android device into so you can modify the file system images from a computer over a USB connection, that is, you can flash roms to it. Is part of the ASDK (Requires more than the SDK - does it?), and specific USB drivers for windows. For fastboot to work, the device has to be in fastboot mode in order for the computer to send commands to it.
----- http://www.elinux.org/Android_Fastboot
Code:
./fastboot help
----- Usually commands are in the format: fastboot <operation> <kf_source/destination> <file>
----- So to change the splash screen image, something like:
----- ----- http://forum.xda-developers.com/showpost.php?p=21262416&postcount=126
Code:
fastboot flash splash1 splash1.img
Recovery Mods - Essentially a rudimentary OS / advanced bootloader. Many are ROM managers that allow you to switch between various OS's you have stored on your device in ROM format, or to add/delete them. You basically wipe the system then install a new one each time you switch ROMs. Recovery mods also serve backup functions, and allow tethering (so you can use your phone as an internet connection for your laptop). The term 'recovery' comes from Android's /dev/mtd/mtd1 recovery partition, as compared to the /dev/mtd/mtd2 boot partition; the latter is the primary boot holding the kernel and initrd with rootfs for default boot, while the former is the backup boot holding another kernel and initrd with rootfs in case the primary borks; note that mtd3 is the system partition holding the bulk of the Android system files, mtd4 is the cache which is only used for OTA (Over The Air Amazon/Sprint/Verizon updates) so largely unused, and mtd5 is userdata for user-installed apps and data.
----- http://www.elinux.org/Android_Fastboot
----- TWRP (Team Win Recovery Project) is one popular recovery, built on ASOP (Android Open Source Recovery) recovery.
----- ----- http://www.teamw.in/project/twrp
----- ----- http://teamw.in/project/twrp2/79 <- the kindle fire page
----- CWM (ClockworkMod) is another recovery, but there is some sort of bug with certain chips in 1st-gen Kindles that will brick sometimes with CWM, so don't use it.
----- ----- http://www.clockworkmod.com/
----- COTR (Cannibal Open Touch Recovery) is a newer recov. Open as in open source, touch as in touch screen.
----- ----- http://www.redmondpie.com/cannibal-...ures-of-all-custom-recoveries-under-one-hood/
Bootloader - Just like a linux bootloader. This is the first thing you install (after you get root access). The Kindle requires a special one because there needs to be a way to access recovery with just one button (as opposed to a cell phone).
----- FFFe (FireFireFire Extended) - Seems to be the most popular for Kindle Fire. The extended, I believe, is a variations where dual boot is enabled (see Recovery Mods info to get an idea of how that works.) To use it, when the logo pops up after you turn on the Fire press the power button. It also does some other stuff, like make fastboot easier (I think the usb detection triggering fastboot is the 1st stage, and the rest of FFF is second). I believe that FFF is based on kf_u-boot (which is now outdated?).
----- ----- http://forum.xda-developers.com/showthread.php?t=1369405
----- ----- http://forum.xda-developers.com/showthread.php?t=1615093 dual boot with FFFe
----- kf_u-boot - Pokey9000's (from http://forum.xda-developers.com) KF-specific fork of the firmware Das U-Boot (typically abbreviated as just "U-Boot") for Embedded PowerPC, ARM and MIPS systems.
----- ----- http://www.denx.de/wiki/U-Boot/
Bootmode - "As the Kindle Fire powers up or reboots, the bootloader begins to do its job and checks for the bootmode of the device. The bootmode tells the bootloader how it should proceed in the boot up process. Most users will just be concerned about three of these bootmodes: normal (4000), fastboot (4002), and recovery (5001). In a great majority of the cases, the Kindle Fire will be in the normal bootmode setting, telling the bootloader to continue right on to booting the operating system. However, there are circumstances when the device needs to be started up directly in fastboot or recovery mode. This is possible by changing the bootmode setting and rebooting the device. Bootmode is a persistent setting, meaning the Kindle Fire will remember this new setting until it is changed again. No amount of restarts or ROM flashes will change the bootmode until it is explicitly changed again."
----- http://forum.xda-developers.com/showthread.php?t=1552547
SU and Superuser.apk - Superuser is an app that manages what apps on your rooted device have access to the su binary. Apps that are granted su have elevated permissions and can modify just about any part of the system. Superuser.apk runs as any other app and gives you, the user, a place to see what apps you have allowed or denied, as well as view a log of which apps have used su when. The su binary is what other apps call when they need superuser rights. The binary checks the database maintained by Superuser.apk to determine if you have already granted rights to the requesting app, and if not tells Superuser.apk to display a prompt asking you for permission. Superuser comes pre-installed on any rooted ROM. In fact, without it, you don’t have a rooted device at all. You cannot uninstall it, it lives on the system partition with other apps that came pre-installed on your device. It can be updated from the Market if the developer of your particular ROM has used a version that is signed with the proper keys, which are publicly available on my github (see link).
----- http://androidsu.com/superuser/ (You want the ARM architecture for the KF.)
##########################################
##### Set up ADB and Fastboot (via ASDK) #####
##########################################
http://androidtweak.in/general/installing-and-setting-up-android-sdk-adb-and-fastboot-on-gnulinux/
1. Download and unpack the Android SDK from Google to /opt. Get the full ADT bundle.
----- http://developer.android.com/sdk/index.html#ExistingIDE
2. Inside its directory, inside sdk/tools, run ./android.
3. In the SDK Manager that opens check that under Tools the Android SDK Platform-Tools are installed. If not, install them.
4. Exit the SDK Manager.
5. Verify that there is now a sdk/platform-tools directory, and that adb and fastboot are in it.
6. If you want, you can add blah/sdk/platform-tools to your $PATH.
Code:
PATH=$PATH:blah/sdk/platform-tools
####################################################
##### Get ADB to recognize the device (Kindle Fire) #####
####################################################
1. Plug in your device. The screen that comes on is called Mass Storage Mode, which allows you to mount /mnt/usb (with fstab setup correctly: /dev/sdh /mnt/usb auto defaults,noauto,user,uid=1000,gid=100 0 0 # kindle fire). Pressing 'Disconnect' on the Kindle will turn off this mode. The following I did with it on, but I don't think it matters.
2. Run 'adb devices'. If you see the first results, ignore the rest of this section.
----- https://rechtzeit.wordpress.com/2011/02/24/adb-devices-shows-no-permissions/
Code:
adb devices
List of devices attached
0123456789012345 device
----- If you see the following, then udev is unable to determine the permissions for this USB device.
Code:
adb devices
List of devices attached
???????????? no permissions
3. Verify the device is connected and get some basic info. (If you're unsure which device is yours, do a lsusb before plugging it in as well.)
Code:
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 1949:0006 Lab126
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
...
----- So the Kindle is device 004 on bus 002, the vendor ID# is 1949, and 0006 is the device #.
4. Get more info. Note that the first result will probably be the last usb device plugged in, but verify by looking at the idVendor and idProduct as well as the manufacturer and product attribute lines.
Code:
udevadm info --attribute-walk --name=/dev/bus/usb/002/004
looking at device '/devices/pci0000:00/0000:00:13.2/usb2/2-5':
KERNEL=="2-5"
SUBSYSTEM=="usb"
DRIVER=="usb"
ATTR{configuration}==""
ATTR{bNumInterfaces}==" 2"
ATTR{bConfigurationValue}=="1"
ATTR{bmAttributes}=="c0"
ATTR{bMaxPower}=="500mA"
ATTR{urbnum}=="1473"
ATTR{idVendor}=="1949"
ATTR{idProduct}=="0006"
ATTR{bcdDevice}=="0216"
ATTR{bDeviceClass}=="00"
ATTR{bDeviceSubClass}=="00"
ATTR{bDeviceProtocol}=="00"
ATTR{bNumConfigurations}=="1"
ATTR{bMaxPacketSize0}=="64"
ATTR{speed}=="480"
ATTR{busnum}=="2"
ATTR{devnum}=="4"
ATTR{devpath}=="5"
ATTR{version}==" 2.00"
ATTR{maxchild}=="0"
ATTR{quirks}=="0x0"
ATTR{authorized}=="1"
ATTR{manufacturer}=="Amazon"
ATTR{product}=="Kindle"
ATTR{serial}=="123456789012345"
5. If you haven't up to this point, switch to root.
6. Create a udev rules file for the device.
Code:
cd /etc/udev/rules.d/
vi 99-android.rules
----- Note that udev is being replaced by hal (at least in Slackware), and so a rules/policy file will probably need to be made in /etc/hal/fdi/policy instead of this in the future.
7. Enter the following into it and save. You should be able to leave out owner:group to let anyone use, and there are probably several other variations that will work (e.g., I believe instead of SYSFS you can have ATTR or ATTRS).
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="1949", OWNER="me" GROUP="users", MODE="666"
8. Try it again as root, and then as your user. You should now see the serial number from the udevadm command.
Code:
adb devices
List of devices attached
123456789012345 device
9. You will also need to add a second, identical line changing the idVendor attribute to "18d1". This may not become a problem for you, but when the KF boots into fastboot mode it ceases to be recognized as a standard Kindle and instead looks like this:
Code:
lsusb
...
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 18d1:0100 Google Inc.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
######################
##### Temp Root It #####
######################
In order to gain root access to the device, you must use one of several methods. Which one you use will depend on the device and its current system (firmware?) version. To find your version go to Settings -> More -> Device -> System Version. As of this writing (2013-09-20), my 1st-gen Fire is version 6.3.2. The generic Android root util called SuperOneClick is known to work on at least the 6.2 Kindle software versions. You can also install an app on your Kindle called ES File Explorer (Apps -> Store -> search for 'ES', select the app, click Free, click Get App, click Install, etc., Open App) that has a root util that comes installed in it (which should show up right there, check out youtube vids for details). You can also do it by hand using fbmode (known to work with 6.2 through 6.3.1). Note that most of the one click type utils just batch run fbmode commands or similar by hand methods.
1. Go to Settings -> More -> Device
----- 1a. -> Allow Installation of Applications, change it to on.
----- 1b. Be sure you see Battery Fully Charged. If something goes wrong, you don't want it running out of juice before you can fix it.
2. Connect your device to the computer, and disconnect (aka turn off Mass Storage Mode).
3. Verify that adb is working. The prompt in the first result means it is. If it's not you'll see the device not found error. (Be sure to exit the adb shell when done.)
Code:
adb shell
$
$ exit
adb shell
error: device not found
4. (Be sure to exit the adb shell first.) Check to see if you already have root access. If you get the first result, then you have root access and can skip the rest of this section.
Code:
adb root
adbd is already running as root
adb root
adbd cannot run as root in production builds
5. Get into fastboot mode somehow, fbmode is the easiest. This is a workaround to get you into fastboot mode when you don't have root privileges. Note that once you have root privileges, you can change the bootmode with "adb shell idme bootmode 4002; adb reboot" instead. (Also, I'm not sure if fbmode gives permanent root privileges.) First download fbmode and unzip it into the platform-tools dir.
----- http://forum.xda-developers.com/showthread.php?t=1414832
----- MD5sum: 091dc2ca822eab525d85aad629add7d3 fbmode.zip
----- I extracted it to sdk/platform-tools/fbmode(by_pokey9000).
----- 5a. Place the fbmode file onto your KF in /data/local/tmp. (You can also use /data/local. The /data partition is write accessible to unprivileged users so that's why we use it.)
Code:
adb push fbmode(by_pokey9000)/fbmode /data/local/tmp
3225 KB/s (510876 bytes in 0.154s)
----- 5b. Change the file to executable by running a command in a remote shell on the KF, and verify.
Code:
adb shell chmod 755 /data/local/tmp/fbmode
adb shell ls -l /data/local/tmp/fbmode
-rwxr-xr-x shell shell 510876 2011-12-29 01:32 fbmode
----- 5c. Now run the binary via a remote shell, and verify.
Code:
adb shell /data/local/tmp/fbmode
----- 5d. Reboot the device (will reboot into fastboot).
Code:
adb reboot
6. Immediately continue with installing a bootloader.
############################
##### Install a Bootloader #####
############################
There are lots of these available. Currently (2013-09-20) FireFireFire Extended v1.4a seems to be the most popular. Note that the older version of FFFe (prior to 1.4) caused the yellow triangle boot hang problem you may read about. As mentioned in the Key Terms above, you will need a bootloader specifically designed for the Kindle Fire so you will be able to access the recovery partition/software using the only (power) button.
1. Download FFFe, and unzip it into the platform-tools dir.
----- http://forum.xda-developers.com/showthread.php?t=1632375
----- ----- https://code.google.com/p/kindle-alt-roms-cm10-cm9-dev/downloads/detail?name=fffe-1.4.1-awidawad.zip
----- ----- SHA1: b99620e382ea5d01cb6fa9e465ab719f63621780
----- or: http://goo.im/devs/Hashcode/otter/bootloader/ <- this one is hashcode's and I think I trust it more.
----- ----- MD5sum: 419c53b922c963082454b14b7de75a90 fff-u-boot_v1.4a.zip
----- I extracted this into sdk/platform-tools/fff-u-boot_v1.4a(by_hashcode)
2. Flash the fff binary to the bootloader partition. The binary will be in the cache directory. I'm not sure you even need the META-INF files or the padfile. I expect it would have been fine to go from sdk/platform-tools/fff-u-boot_v1.4a(by_hashcode)/cache/fff-u-boot_v1.4a.bin, however, I'm not sure how important the other files are so I unzipped it all to the sdk/platform-tools dir and used it from there. The -i 0x1949 switch is required for non-root privileged devices.
Code:
fastboot -i 0x1949 flash bootloader fff-u-boot_v1.4a.bin
sending 'bootloader' (243 KB)...
OKAY [ 0.065s]
writing 'bootloader'...
OKAY [ 0.177s]
finished. total time: 0.242s
3. Continue immediately with flashing the recovery.
##########################
##### Install a Recovery #####
##########################
1. Download TWRP. As of this writing (2013-09-20) TWRP is at 2.6.3, and we want the Otter. (Note the codename for KF 1st-gen is Otter. So I assume Otter is what we want, but I've seen people mention or reference Blaze a lot. I'm not sure what that is, but since the references were usually a year or so old and since I know Otter will be correct, I'm going with Otter.)
----- http://teamw.in/project/twrp2/79
----- MD5sum: 8b5e6f15ab88ce52022991925dcd4ac0 openrecovery-twrp-2.6.3.0-otter.img
----- I extracted this directly into sdk/platform-tools/.
2. Flash the openrecovery image to the KF's recovery partition. The -i 0x1949 switch is required for non-root privileged devices.
Code:
fastboot -i 0x1949 flash recovery openrecovery-twrp-2.6.3.0-otter.img
sending 'recovery' (6564 KB)...
OKAY [ 1.648s]
writing 'recovery'...
OKAY [ 1.416s]
finished. total time: 3.064s
3. You now need to reboot the KF. Do not do 3a, but read because in Jcase's 2.6.3 instructions, he tells you:
----- http://forum.xda-developers.com/showthread.php?t=1568340
----- 3a. Your device will now boot into twrp recovery, and flash the firefirefire bootlaoder. When done it will prompt you to reboot. Upon reboot you will get stuck on the "yellow triangle" screen of firefire fire.
Code:
fastboot oem idme bootmode 5002
fastboot reboot
----- I have no idea what he's talking about. Those commands did not work for me. When I figured out how to restart in a manner that made more sense (see 3b.), I selected to boot into the TWRP recovery, and as far as I could tell, TWRP did not flash its own version of FFF, nor did it reboot. It simply started TWRP. I poked around in there. It did at one point tell me that it was not yet rooted and asked me if I wanted to have it do it, but I declined to follow the rest of Jcase's instructions. Point of the story: ignore 3a, and do 3b instead.
----- 3b. Reboot the KF.
Code:
fastboot -i 0x1949 reboot
rebooting...
finished. total time: 0.000s
4. This will now boot into the FFF bootloader, which will offer you a choice prior to booting into the primary OS of booting into recovery. You will want to do that for the next commands to work. You need to immediately continue to permanently root it.
############################
##### Permanently Root It #####
############################
1. Get Superuser/Su and unzip it. As of this writing (2013-09-20) the latest is Superuser 3.2 RC3. The KF uses the ARM chip architecture so we want the ARM version (see above in the Key Terms section). Note that you need to make its own directory to unzip it into because all but two of its files are the same that as those that came with FFF, and in case they are different (use diff) you don't want to replace them; if they are different, you'll have to make the call which versions you want to use. The two files you do want no matter what will be in the system/ directory.
----- http://androidsu.com/superuser/ (You want the ARM architecture for the KF.)
----- MD5sum: 6462ac14cd38ed7c539ce3e29a6b92a8 Superuser-3.2-RC3-arm-signed
----- I extracted it into sdk/platform-tools/Superuser-3.2-RC3-arm-signed(by_ChainsDD)
----- 1a. Once in recovery, mount the /system partition in read/write mode. ("adb shell remount system" might also do this, and it will change a mounted /system between r/w and ro.)
Code:
adb shell mount system
----- 1b. Copy su to the right place in /system.
Code:
adb push Superuser-3.2-RC3-arm-signed(by_ChainsDD)/system/bin/su /system/xbin/su
3447 KB/s (85096 bytes in 0.024s)
----- 1c. Change the ownership to root only (so nobody can mess with it).
Code:
adb shell chown 0.0 /system/xbin/su
----- 1d. Change the permissions to executable (so anyone can try to get su), and verify.
Code:
adb shell chmod 06755 /system/xbin/su
adb shell ls -l /system/xbin/su
-rwsr-sr-x 1 root root 85096 Feb 29 2008 /system/xbin/su
2. Disable the root checker by renaming the executable. (I suppose you could just chmod a-x it, but this is how the pros do it, so I'll stick with their method.) I'm not entirely certain what check_rooted does, but I assume it is used by Amazon and will cause headaches.
Code:
adb shell ls -l /system/bin/check_*
-rwxr-xr-x 1 root shell 54680 Aug 1 2008 /system/bin/check_prereq
-rwxr-xr-x 1 root shell 5556 Aug 1 2008 /system/bin/check_rooted
adb shell mv /system/bin/check_rooted /system/bin/check_rooted.bak
adb shell ls -l /system/bin/check_*
-rwxr-xr-x 1 root shell 54680 Aug 1 2008 /system/bin/check_prereq
-rwxr-xr-x 1 root shell 5556 Aug 1 2008 /system/bin/check_rooted.bak
3. Return to normal bootmode (4000), and reboot. (Actually I'm not sure we ever changed it since we didn't use Jcase's "oem idme bootmode 5002" command, and I'm pretty sure fbmode only changes it for 1 reboot. But doing this will not hurt anyway.)
Code:
adb shell idme bootmode 4000
<idme> write 4000 to offset 0x1000
adb reboot
4. After reboot, when you're back in Amazon's default OS, install the Superuser app. It will appear in your carousel. Play with it.
Code:
adb install system/app/Superuser.apk
7539 KB/s (1500495 bytes in 0.194s)
pkg: /data/local/tmp/Superuser.apk
Success
######################################
##### Make A Full (up to 8GB) Backup #####
######################################
This will back up all partitions and the hidden NVRAM data. If you ever have to restore from scratch, you can get fastboot to write a new partition table and then fastboot in these backups. Need >8GB local free, and adb installed and able to get a shell.
----- http://forum.xda-developers.com/showthread.php?t=1369405
1. Make a new directory to store the dump files and cd into it.
Code:
sudo mkdir /mnt/1.2tb.pri_my300/KindleFire
sudo mkdir /mnt/1.2tb.pri_my300/KindleFire/preROMing.backup
2. Make sure that your KF is running adb as root (as above in #? of the Root It section).
Code:
adb root
adbd is already running as root
3. Then pull the blk copies from the device. This will place them on the root fs, and then I move them to the backup directory. (I'm sure you can direct them to the end destination with pull, but I didn't figure that out before I ran this.)
Code:
for F in `seq 1 12`; do adb pull /dev/block/mmcblk0p$F; done
adb shell idme ? > nvram.txt
sudo mv mmcblk* nvram.txt /mnt/1.2tb.pri_my300/KindleFire/preROMing.backup
#######################
##### Install a ROM #####
#######################
http://forum.xda-developers.com/showthread.php?t=1638452
1. Download the one you want from the link. Hashcode, who is active on xda-developers, maintains the CryanogenMod, and he seems to be trusted to do quality work so I'll use the latest CM ROM. As of this writing (2013-09-20) the CryanogenMod-10.2 is current. Note the codename for KF 1st-gen is Otter (not Otter2, not sure what blaze is for).
----- http://forum.xda-developers.com/showthread.php?t=2410112
----- http://goo.im/devs/loosethisskin/otter/cm-10.2
----- MD5sum: 7a5c807f410ecaeb37220bda8c7b4eee cm-10.2-20130913-0258-otter-sgt7.zip
2. Copy the ROM.zip file to the /sdcard directory on the KF, and checksum it.
Code:
adb push cm-10.2-20130913-0258-otter-sgt7.zip /sdcard
6569 KB/s (186800117 bytes in 27.769s)
adb shell md5sum /sdcard/cm-10.2-20130913-0258-otter-sgt7.zip
7a5c807f410ecaeb37220bda8c7b4eee /sdcard/cm-10.2-20130913-0258-otter-sgt7.zip
md5sum cm-10.2-20130913-0258-otter-sgt7.zip
7a5c807f410ecaeb37220bda8c7b4eee cm-10.2-20130913-0258-otter-sgt7.zip
2. Definitely check and follow the instructions on the specific ROM's info page. In this case, I believe it is the standard methodology. Since it tells us to also install Gapps, we need to download that as well. (See Install Gapps section below for more info.)
----- 2a. Download it. In my case, Hashcode has given instructions to get it the following link. You are to match up your CryanogenMod version with the appropriate Gapps version, which is made easy with the table at the top.
----- ----- http://goo.im/gapps
----- ----- MD5sum: 1f51b5cc6370c1f45dc951109b6ce6ed gapps-jb-20130813-signed.zip
----- 2b. Copy it to the KF, and checksum it.
Code:
adb push gapps-jb-20130813-signed.zip /sdcard
adb shell md5sum /sdcard/gapps-jb-20130813-signed.zip
1f51b5cc6370c1f45dc951109b6ce6ed /sdcard/gapps-jb-20130813-signed.zip
3. Wipe cache, dalvik, data and system (full wipe). Wipes typically remove the existing files in the data and cache partitions that could interfere with the operation of the new system software. A "Factory Reset" will delete any installed apps, software/network settings, etc. It will not touch the /sdcard directory that contains music, eBooks, and files of that nature. In our case, we need to do the four listed by Hashcode.
----- 3a. From the main menu of TWRP, Wipe -> Advanced Wipe -> Select Partitions to Wipe
----- 3b. Check the dalvik, data, cache, and system boxes.
----- 3c. Swipe to Wipe.
4. Install from your ROM.zip, and tell it to install Gapps while you're at it.
----- 4a. From the main menu of TWRP, "Install"
----- 4b. Navigate to the /sdcard directory on the left (should be the default the first time you use TWRP) and select the cm-10.2-20130913-0258-otter-sgt7.zip file from the list on the right.
----- 4c. Check the box "Zip file signature verification?" if you've placed .md5 files with the zips. Even though you already have, it's nice to make sure TWRP agrees with you.
----- 4d. Press "Add More Zips"
----- 4e. Select the gapps-jb-20130813-signed.zip file from the right.
----- 4f. Swipe to flash install them.
5. When it's finished and you are prompted, press "Reboot.
6. When you reboot, CM will take some time to get going the first time, just let it. Then walk through the setup process. All your setings, like the Wi-Fi password, will be gone and need to be recreated.
7. Cleanup by deleting the zips within the File Manager app.
###################################
##### Install Google Apps (Gapps) #####
###################################
You may not actually need this. It may come installed with the ROM, but you'll definitely want Gapps either way because this includes Google Marketplace where you can get all the Android apps.
1. Download it. In my case, Hashcode has given instructions to get it the following link. You are to match up your CryanogenMod version with the appropriate Gapps version, which is made easy with the table at the top.
----- http://goo.im/gapps
----- MD5sum: 1f51b5cc6370c1f45dc951109b6ce6ed gapps-jb-20130813-signed.zip
###################################
YOU'RE DONE MOTHER****ER!
Play around.
Try some other stuff:
###################
##### ~/.android #####
###################
It's useful to have a single place on your main box to keep everything you want/need. So:
1. Make a ~/.android dir and cd into it.
2. Make some dirs.
----- .Bootloader
----- .Recovery
----- .ROM
----- .ROM/CM-10.2
3. link to platform tools
Code:
ln -s ../../../opt/adt-bundle-linux-x86_64-20130917/sdk/platform-tools/ .platform-tools
4. Move the fbmode and superuser dirs from there to here.
----- .fbmode(by_pokey9000)
----- .superuser-3.2-RC3-arm-signed(by_ChainsDD)
5. Move fff-u-boot_v1.4a(by_hashcode) into .Bootloader, move openrecovery-twrp-2.6.3.0-otter.img into .Recovery, move cm-10.2-20130913-0258-otter-sgt7.zip and gapps-jb-20130813-signed.zip in .ROMS/CM-10.2 (you move gapps with it because it is fairly specific to the ROMs)
6. CD to the real /opt/.../platform-tools. Symlink to those six dirs and files.
#####################
##### App Backup #####
#####################
Besides complete backups, you can also simply save the apps you have installed to you 'puter. This is useful before you go uninstalling **** that you only think you don't need. Of course, there are apps that will do most of the following for you, namely Titanium Backup, which you should probably use since they'll sync things instead of just overwriting.
1. Navigate to your ~/.android/ director.
2. mkdir an apps folder, an apps/system, and an apps/data.
3. Copy all the apk files to your pc. Note that the data/app files are all unimportant apps that you've downloaded. The system ones are what you really need to be concerned about removing.
Code:
adb pull /system/app ./app/system
pull: building file list...
pull: /system/app/FaceLock.apk -> ./FaceLock.apk
pull: /system/app/VoiceSearchStub.apk -> ./VoiceSearchStub.apk
pull: /system/app/TalkBack.apk -> ./TalkBack.apk
...
adb pull /data/app ./app/data
pull: building file list...
pull: /system/app/FaceLock.apk -> ./FaceLock.apk
pull: /system/app/VoiceSearchStub.apk -> ./VoiceSearchStub.apk
pull: /system/app/TalkBack.apk -> ./TalkBack.apk
...
----- You can also look at the package list via the package manager, and include their associated files (-f) if you want.
Code:
adb shell pm list packages
...
adb shell pm list packages -f
...
----- Or grab the list files directly and look at them.
Code:
adb pull /data/system/packages.xml .
adb pull /data/system/packages.list .
----- You can install or uninstall via adb (assuming you have root access and system is mounted rw)
Code:
adb root
adb remount (or adb mount -o rw,remount /system)
adb install <package name>
adb uninstall <package name>
----- Or more viciously:
Code:
adb shell rm -f /system/app/<apk-name>.apk
----- Or via the package manager:
Code:
adb shell pm uninstall <package-name>
###############################
##### Remove Unneeded Apps #####
###############################
Check out this page to give you a list of apps included with your specific CM OS version. Then remove ones you don't want. You will want to use ES File Explorer to shutdown, clear data/cache, then uninstall these. For some you'll need to use ES in root mode, which can be found in ES's settings.
[couldn't post the url]
[couldn't post the url]
Android Keyboard (AOSP) - If you replace this with a different keyboard, you can remove this safely. I like Hacker's Keyboard, but honestly I don't feel quite safe eliminating this one altogether.
Apollo - Music app/widget. You will probably want to replace with something else that handles more codecs.
Bluetooth Share - The KF doesn't have bluetooth.
Bubbles - This and other wallpapers can obviously be removed.
Calculator - Might want to replace this with a better one.
Calendar, Calendar Storage - You can remove this, but Google uses it to sync with your Google account. More importantly, it appears that _LOTS_ of calendar apps use Google's Calendar/Sync as a proxy. So even if you find a different calendar app, it might need Google's stuff here to work correctly. Leave it alone.
Cell Broadcast (Receiver) - This app operates on a different frequency than primary cell/data/text service. This means that when an emergency happens and too many people are calling each other at the same time, the cell carriers, and really the govt, can broadcast emergency info that will get to everyone. You can also use it to listen to a specific channel if you know someone is broadcasting on it. Obviously, since the KF doesn't have cell service, this is completely useless and can be removed.
Clock and cLock - You can remove both, but the system Clock might need to be kept for certain apps to function. cLock doesn't need to be there. I did take out both, and FancyWidget's clock kept working so it obviously didn't depend on this app and took date/time from the system itself. That said, Clock does provide an alarm, and so might possibly be the primary alarm service.
Downloads & Download Manager - You might be able to replace these, but why bother.
DSP Manager - Digital Sound Processing. This is basically an equalizer, but does let you make different settings for speakers, headphones, etc. There are probably better, but why bother. More, do you really need this at all? Wait and find out.
Email - An email client. Can be replaced by something else. You don't need this as long as you're solely using gmail or other web-based email.
Exchange Services - This is a client for MS Exchange. It provides the server-client sync.
Face Unlock - Provides capability to unlock screen with face recognition. With no camera, the KF has no need for this whatsoever.
File Manager - If you've replaced it with ES File Explorer, you can remove this. However, I think it's not a bad idea to keep this around as a backup. Of course, with the ability to use ADB to install, it's really not necessary.
Focal - This is CM's replacement for android's standard camera app. The KF has no camera, remove this.
Gallery - Is a simple 3d photo browser. There are probably better ones, but since your KF doesn't have a camera this will only be useful for pics you grab from the net. You probably will not need anything better.
Google Ears - This is a widget that will ID songs for you by listening. This is a problem since the KF doesn't have a built in mic. It might work via a headset device's mic. You can try it and see. I'm not sure if this might also ID a song playing through the KF, like if you're listening to internet radio.
Google Feedback - This is the app that reports back to Google when apps bork. I always turn error reporting off, but removing this would ensure nothing hinky takes place without your knowledge. On the other hand, other Google apps might wig out if it's not there. CM says it's safe to remove.
Google One Time Init - This runs the first time you start the device. That CM link says that it conflicts with another Google app. Remove it after the first run.
Google Partner Setup - Not sure what it does, but according to the second link it's no problem to remove. I removed it from the startup list so far.
Live Wallpaper Picker - Yeah, you need this.
Market Feedback Agent - It's a Google app that allows other apps to call it and ask you to provide market feedback, you can safely kill or remove it.
Media Uploader - This is an app for use with Swingular.com that lets you take pics of yourself and share them to people you're cybering with. It has things like auto-faceblurring. You can use this without a cam, but with the KF it seems unlikely. Remove.
Mobile Data - Used for data xfer on cell carrier network. Pretty sure it won't hurt to remove.
Mobile Network Config - Used for configuring cell network. Pretty sure it won't hurt to remove.
Movie Studio - This is a fairly low-rated video editor. It was probably included by CM for size and/or simplicity. You don't really need a vid editor on your KF since with no camera you can't take vids. I honestly can't imagine needing to replace this, so remove.
News & Weather - A simple news reader app. Probably should find a replacement.
Notepad3 - This is a simple text editor app. It is very small, so you could probably leave it even if you replace it with something else.
One Time Init - See Google One Time Init above. I think these are two parts of the same thing, but this one might be to trigger the CM Account app and prompt for registration.
Picasa Uploader - Uploads pics to your Picasa account. Since no camera on KF, remove this.
Pico TTS - Is a service for Text to Sound. It might only be used by TalkBack below, in which case you can eliminate it. But, it also might be used by other TTS apps, in which case you'll probably want it around.
Provider Telephony - Provides APIs for monitoring the basic phone information, such as the network type and connection state, plus utilities for manipulating phone number strings. Probably can safely remove this.
Search Applications Provider - This has to do with Google Search. Apparently there's a bug in it that makes this slow down search. I don't think it's a good idea to remove this, but you should disable it in the App Manager. This could, however, cause problems so keep it in mind.
Setup Wizard - Runs the first time you start phone. Remove it.
SMS Push - This has to do with text messaging and also WAP Push. You can probably remove it, but might want to wait.
----- [couldn't post url]
Sound Recorder - A simple recorder. Probably don't need more.
TalkBack - This is a Google app that will read and speak aloud text from your phone's menus and some Google apps. So for Gmail it'll read the subject line of each email you touch. It's for blind people and probably not all that great for them, either, since it's pretty limited. There are other apps that do TTS (Text to Sound), and I'd recommend looking into those. I'd say remove this, but who knows how *****y Google will get about it. See Pico TTS above.
Terminal Emulator - Is one of the most popular terms. I think Terminal IDE is better, so you should at least add that, if not replace this altogether.
Trebuchet - This is a launcher service which does a lot more than just launch apps. Good launchers provide _lots_ of additional ui customizations, and Trebuchet is one of the better ones. Keep it unless something changes in the near future. Halo (notification manager) is somehow related to this, although I think it is a seperate app; Halo is also considered excellent.
User Dictionary - A user dictionary addon for android devices that do not have a standard user dictionary component. It is used by the keyboard and god knows what else. Do not remove it. There are similar apps. It might be possible to replace this with one of the others, but why bother.
Voice Dialer - This is a voice activated dialer for phones by Google. Obviously the KF doesn't need it.
Voice+ - Another phone related Google app; it catches all outgoing calls and uses Google Voice service to connect you with the dialed number by calling you back on your selected callback number first, then calling the number you dialed. I think it basically covers your cell phone's number with an online one. Obviously the FK doesn't need this, either.
###################
##### Add Apps #####
###################
Important:
DroidWall - Simple firewall app, lets you whitelist apps to give access to the internet.
Titanium Backup - System backup/restore app, lets you transfer apps/data/settings from one OS/mod to the next.
ES File Explorer - File manager.
ES Task Manager - Lets you kill apps.
TrustGo Security - FW/AV. Lets you scan your system/apps, scan incoming, etc. Currently one of the better free Firewall/AntiVirus for Android. It will probably be replaced by the next time you need to dl one, so google.
Greenify - Resource manager of sorts, it lets you choose which apps to have free reign of resources, and which to stick into hibernate mode when you're done using them. This means you don't have to constantly use ES Task Manager to kill apps when you're finished with them.
Adfree - Downloads/Updates a hosts file to block ads from the internet and apps.
System Tuner - Has endless tweaks, diagnostics, and functions.
Terminal IDE - A terminal emulator with all sorts of nice features and commands. Just poking around in this for a couple minutes and I'm in love. It installs a bunch of C binaries of commands you're used to, giving a much more familiar robustness. Note that this will create a $HOME directory for you that exists within the app's own /data/ directory tree. If you want to create a single home for all apps, you will need to make some changes.
ROM Manager - This would be useful if it would use TWRP, but since it's developed by the same guys as ClockworkMod Recovery, it insists you install that. Since at this time it seems CWM has problems with Kindle Fire?, you probably won't be able to use much of this for a while. What you really need is to find an entire system image creator for backups. ROM Manager does have a function for fixing permissions, which presumably makes sure nothing has messed up the permissions on important sys files.
Apps:
Amazon App Store - This is the second largest after Google's, but you'll have to get the app store app to use it. And there will be apps only available there.
Keyboard - You can remove the keyboard that comes with your OS if you replace it with a different one.
Hacker's Keyboard - This is a full keyboard complete with arrow keys. It also has a function key to get Home, End, the F row, etc. You can set it so that it will use the Android Keyboard in portrait mode, but switch to the HK in landscape.
Swype - Lets you drag finger across screen to each letter rather than tapping.
SwiftKey - Predictive text is the specialty here, gets to know you and can predict your next word.
Widgets:
FancyWidgets - Not perfect, but gives you a nice clock/weather widget.
WeatherBug - Gives you detailed weather info.
Browser:
Android Browser: Seems fast.
Dolphin - I think this is the winner. Pretty fast, and also has a lot of good features.
FF - Seems slow, and also has your familiar add-ons, but there would be the nice advantage of bookmarks sync. Of course, with a hosts file based ad block (AdFree) you won't need adblock and that should help.
Opera - Seems fast but limited in features.
There are many others.
Browserlike Apps:
Gmail - Google's gmail reader app.
Tapatalk - A BBS forum reader/interface app.
Facebook - Some say a good, others say a ****ty FB reader app.
DuckDuckGo - Is a search app that I believe you can set up to punt you off to a browser if you're going to do much more.
Ebook Reader:
----- TTS (Text to Sound) - I'm not sure if you'll need one of these or if one will come in your ebook reader, but I think you'll eventually want to check it out. It'd be nice to be able to have a book or wikip page read to you while doing other ****. Also see Pico TTS.
There are a lot.
Video Player, Video Editor:
tbd
Music Player:
tbd
News Reader:
tbd
Pic Viewer, Pic Editor:
tbd
RSS Reader:
tbd
Maps:
Google Maps - Supposedly there's a way to get offline maps, but I couldn't figure it out.
Maps With Me - Offline. I dig it.
OsmAnd - Offline. Didn't like.
RMaps - Offline. Didn't like.
MapsOn - Offline. I dig it.
Misc:
Google Sky Map - A very fun app to have to see the location of stars, planets, galaxies, and constellations.
Bubble Level (not sure of name) - An app that will act like a carpenter's level.
Screenshot UX - Lots of root and non-root screenshot apps. I liked this the best.
Games / Learning - Be very careful of these. Definitely want to AV scan these before using. Watch their permission requests for strange things they shouldn't need.
Chess Free
Sudoku Plus
Duolingo - Learn a language.
Solitaire
Tetris
##################################
##### Stop Auto Startup of Apps #####
##################################
It will scare you how many apps and services startup by default. Use SystemTuner -> Startups. And uncheck all these (note that some need to have other things installed before you do this, like the Android Keyboard, so be smart).
Android Keyboard AOSP
Calendar, Calendar Storage
Clock - This might cause probs, but shouldn't.
CyanogenMod Account
DSP Manager - You may want to check that this starts on its own when you start your media apps. If not, if you want this you'll have to start it by hand, or turn this startup back on.
Firefox
Gallery
Gmail
Google Contacts Sync
Google Partner Setup
Google Play services
Google Play Store
Google Search
News & Weather
ROM Manager
System Tuner
Titanium Backup
WeatherBug
Fixed. No links in 3rd post, sorry.
Sent from the 404
ADB Master helps you manage and monitor multiple Android devices using ADB (Android debug bridge). One click to switch adb to wireless, perform actions, commands or view and compare installed apps, running processes with cpu usage or browse logcat data for multiple selected devices… At the same time. Without root!
Updated November 2015
Download ADB Master 1.61 for Windows, Mac or Linux.
Quick start
1) Make sure ADB is installed on the PC
- http://developer.android.com/sdk/
OR
- http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/
OR
- http://www.xda-developers.com/andro...ng-fast-adb-fastboot-and-driver-installation/
2) Install and run ADB Master for your operating system.
3) Set the ADB location in the “Control” tab of ADB Master by browsing to the folder containing the “adb” binary. The background will turn green when the correct folder is selected.
Notes:
- For an Android device to appear in the list, enable "Settings > Developer > USB Debugging" on the device and connect it to the computer with a USB cable.
- In ADB Master, select one or more devices from the list of USB or WiFi connected devices to perform actions or view information on them...
Windows Users: You will need to install the Android ADB drivers if your device is not detected.
Automatic updates under Windows: If you get an error updating an older version using the built in update feature, try running the app as an administrator (right click and select "Run as administrator"). You only need to do this to update the app - not every time you run it.
Mac users: If you get an error that the app is corrupt or cannot be opened, try right clicking it and select open to allow it to run (you only need to do this once).
Linux users: The new 1.5 linux version includes a run script and has some special permission set as follows:
(Thanks to Craig D) if you want to run ADB-Master via its icon, the .jar permissions need to be set to 'executable'... This can be done by opening a Linux terminal and typing: chmod +x ADB-Master.jar.
Without setting the permission to +x you can only run it from terminal by typing: java -jar ADB-Master.jar.
If you like the app and want to support it, please purchase the paid version in the Google Play Store (search for 'ADB Master').
Using the ADB Master GUI
Device lists
View attachment 2670819 At the top of the application are the device lists. These lists provide a way to list and select devices to work with.
There are two lists:
1) USB connected devices with a button to switch the selected devices to WiFi (tcpip) mode. This will install “Helper.apk” to display adb state on the device and enable the device to be discovered and connected to by ADB Master.
NOTE: The device(s) and the computer must connected to the same WiFi access point for a successful ADB-Over-WiFi connection.
NOTE: Unfortunately, some android builds do not have the ability to use ADB-Over-WiFi without root.
2) WiFi connected devices which has a button to switch the selected devices to USB mode. This will uninstall “Helper.apk” and set the device back to USB mode.
Control tab
View attachment 2670799 This section allows you to perform actions or commands on all selected devices.
- Shutdown, reboot, reboot to recovery or reboot to bootloader by selecting the devices and then pressing the desired button.
- Press power, back, home or volume up and down buttons on all selected devices at the same time.
- “Identify” a device installs and runs a small utility to wake the device and display the same information that appears in the device list as well as the IP address.
- Execute any custom ADB command in the ADB Command box and hit enter or press “Execute” to run that command on all selected devices. NOTE: This function treats spaces as command separators so it may not work for all possible adb commands at the moment. View the results of the command in the “ADB Log” tab.
Applications tab
View attachment 2670866 This section allows you to compare and manage applications (packages) on all selected devices using the adb commands “adb pm list packages -e”, “adb pm list packages -d” or “adb pm list packages”.
- Install an APK from your pc
- Enable (requires root and su to be installed on the device)
- Disable (requires root and su to be installed on the device)
- Uninstall multiple apps on all selected devices with one click.
- Pull selected apk's
- Pull screenshots
- Start apps
- Force-stop apps (Only works with Android 3 and above)
- Clear app data and cache
App listing color key:
- Green: The app is installed and enabled on all selected devices
- Black: The app is installed and enabled on some selected devices
- Orange: The app is installed on some or all devices, but is disabled on one or more
- Red: The app is installed on some or all devices but is disabled on all installed instances
Processes tab
View attachment 2670801 This section uses the command “adb shell top -m 20” to list the top 20 processes running on the device. It lists all selected devices in one view making it easy to monitor multiple devices at the same time. Future features include the ability to terminate processes and use custom top commands.
Logcat tab
View attachment 2670802 View live Logcat data from all selected devices in one list making it easy to monitor multiple devices at the same time. Future features will enhance this section with the use of filters and colors.
- View and save Logcat messages to files
ADB Log tab
View attachment 2670803 View a log of commands executed by ADB Master. It logs the device, commands and their responses.
V1.1-BETA Changes:
- Fix for incorrect process display in Windows
- Removed the extra blank lines in logs on Windows
- Fix for device name not set correctly in Windows
V1.2-BETA Changes:
- Added tcp reset/disconnect button
V1.32 Changes:
- Added adb sideload feature (useful for ROM developers)
V1.33 Changes:
- Renamed Log tab 'Console'
- Moved ADB custom command fields from Command to Console tab for better context and visibility of command responses
V1.41 Changes:
- Added ability to pull selected apk's
- Added ability to save Logcat messages to files
- Added ability to pull screenshots
- Added ability to start apps
- Added ability too force-stop apps (Only works with Android 3 and above)
- Added ability to clear app data and cache
- Added time stamp to Logcat messages
- Fixed connect command to include the port for some versions of ADB
V1.51 Changes:
- Fixed some delays on the UI when connecting to a device
- Added buttons to open pulled screenshots and apk file locations
- Added installer for Windows users
- Added Mac .app package
- Added Linux version with required permissions set and a run script
V1.60 Changes:
- Added drag and drop to install applications (drag APK's to the application list on the applications tab)
- Added ability to select and execute a file containing ADB commands or drag and drop adb command files onto the console tab
- Added ADB Master automatic updates. Get notified when an update is available then download and install it.
- Added some useful buttons in the control tab that open various control panel items on all selected devices (all buttons may not work on all Android platforms).
V1.61 Changes:
- Improved handling of multiple commands in a single line to allow complex scripts to execute successfully.
- Fix for the way commands are handled in Windows related to line feed characters.
Execute adb commands from a file:
Command file(s) must contain valid ADB commands, one per line and may also contain comments. The starting keyword "adb" is assumed for each line and is optional in the file.
To comment a line, start the line with any of the following (common) comment delimiters: ";" "//" or "rem" as well as ":".
When selecting file(s) using the browse button, you will be prompted with a message containing the commands to be executed before they are executed. Drag and drop command file(s) onto the console tab to execute them without a prompt.
WARNING: ADB Master exposes powerful and advanced tools for working with your Android devices and misusing it can result in the device malfunctioning... REALLY.
Disclaimer: Although great care has gone into creating it, this software is provided AS-IS and you use it completely at your own risk. All rights reserved.
Download ADB Master 1.61 for Windows, Mac or Linux.
The above download links provide the recommended latest versions. Previous versions of ADB Master are also available below.
Note on automatic updates under Windows: If you get an error updating an older version using the built in update feature, try running the app as an administrator (right click and select "Run as administrator"). You only need to do this to update the app - not every time you run it.
XDA:DevDB Information
[APP] [TOOL] [Win | Mac | Linux] ADB Master: A multi-android ADB graphical interface, Tool/Utility for the Android General
Contributors
extremewing
Version Information
Status: Stable
Created 2015-03-07
Last Updated 2015-03-22
Seems Good...! (Y)
I saw a device today that was not completing loading of the apps list and a few other strange things including strange numbers for the processes cpu percentages. I will be looking into this a bit more so you can expect an update soon.
Today, I uploaded a new version that fixes some issues under Windows.
Please see the original post for the download link!
Thanks
Adrian
A new version is in the OP.
It includes a new "Reset" button for tcp connections that have stopped working, particularly useful when waking the PC or changing access points and the old connection is no longer working.
New feature in V1.3: ADB Sideload
I had a request to add ADB "sideload" capabilities to the app (useful for rom developers) and here is the first version to test out that includes this feature. I will update the OP soon if no one has any problems.
V1.31 Increased timeout for sideload
This version has an increased timeout for the adb sideload feature. It is possible the execute thread was not waiting long enough for the upload to complete?
good work, thanks
it's hard to remember the command for me,
V1.32 is now available from the first post
New feature: adb sideload - upload and install updates to a device in one step.
Sideload mode is a special option in the Android's recovery. It was introduced in Jelly Bean (4.1) and higher.
Please see your recovery's instructions on starting sideload mode.
Some small changes in V1.33 on first post.
After some positive feedback, I have published this new 1.33 version on the play store too.
This is a wish list of features to add to ADB Master and I will be working on implementing them.
- Add ability to pull selected apk's from the selected devices
- Add ability to save logcat messages to files
- Add ability to pull screenshots
If you have any other requests, please post here!
Hi, a suggestion: can you make possible to connect to a device with a known ip? I don't want to install those apks...
vipervault said:
Hi, a suggestion: can you make possible to connect to a device with a known ip? I don't want to install those apks...
Click to expand...
Click to collapse
Ok let me figure out what would make sense in how to do that.
Just out of interest, why do you not want to install the apk's (I assume you mean helper.apk)?
vipervault said:
Hi, a suggestion: can you make possible to connect to a device with a known ip? I don't want to install those apks...
Click to expand...
Click to collapse
Just so you know, executing the connect command at a command prompt when you know the IP is quite easy too. The command would be "adb connect <IP>". The good thing with the helper.apk with ADB Master is that it will take care of this for you and even re-connect when a connection is broken for some reason.
Anyway, still waiting to see why you do not want to install the apk's? You could uninstall them straight away from the Applications tab too.
.jar won't open
I double-click on the jar, but nothing happens. Anyone know why this could happen?
Aidoboy said:
I double-click on the jar, but nothing happens. Anyone know why this could happen?
Click to expand...
Click to collapse
You need to have Java installed and then the file type ".jar" should be associated with the java runtime correctly.
Best tool ever!
Vingadero said:
Best tool ever!
Click to expand...
Click to collapse
Thank you! Your feedback makes it worthwhile.
If you have any suggestions or special requests, please feel free to post them.
extremewing said:
This is a wish list of features to add to ADB Master and I will be working on implementing them.
- Add ability to pull selected apk's from the selected devices
- Add ability to save logcat messages to files
- Add ability to pull screenshots
If you have any other requests, please post here!
Click to expand...
Click to collapse
Great tools! Any progres with
- Add ability to pull selected apk's from the selected devices
???
Source code to an alpha tool in Python-QT, if you guys are python savvy show some love <3
https://bitbucket.org/dylanmulrooney/android-launcher/src
In this thread you will finally be able to remove Amazon's terrifying FireLauncher for good, and replace it with your choice of a launcher.
Prerequisites:
Install ADB
Install Nova Launcher / launcher of choice
BACKUP YOUR FIRELAUNCHER.APK
You do not need to corrupt the firelauncher as I have, but it eats system resources and I never want to see it pop up. I have attached a modified version of the firelauncher APK. You will need to download and install it as an update via ADB.
(this is optional, you wont have any launcher after doing this! backup your old APK!!)
Code:
adb install -r -d com.amazon.firelauncher.apk
... as you can now see this will -r reinstall and -d downgrade the launcher, causing it to crash and never open.
Now we need to run a single line of ADB code every time you reboot your device:
Code:
adb shell
Code:
nohup logcat -c; logcat | grep --line-buffered 'flg=0x10200000 cmp=com.amazon.firelauncher/.Launcher' | while read line; do am start com.teslacoilsw.launcher/.NovaLauncher; done &
Code:
exit
This is designed (in combination with destroying firelauncher) to allow you to set any launcher, by default I have it set to am start Nova Launcher.
Once you paste that line of code in adb, you can unplug your device and use it with your new custom launcher!
Please feel free to contact me for detailed instructions!
Cautiously optimistic. Waiting for field evidence before recommending. As always reputations are earned.
First I'd love to thank you for your continuing support to give more launcher choices to the Amazon Fire.
Where can I find and back up the original fire launcher? So if, in the future, we want the fire launcher back, we just install the backup? Any script to run to undo?
About this "Now we need to run a single line of ADB code every time you reboot your device:".
So it cannot be automatically executed?
while trying to adb intall the apk, it shows error: https://www.dropbox.com/s/syyggde0ie7sf4t/Screenshot 2016-09-24 21.58.03.png?dl=0
UPDATE: I got it installed now. The issue above because I ran adb shell first. Anyway, it doesn't seem to shut down the Fire Launcher as I can still see briefly when pressing Home button; and it doesn't allow to set another launcher as default beside Nova. (Fire HD 10 - 5.3.1)
Let's say we want to set a different default launcher to this one: https://play.google.com/store/apps/details?id=com.citc.asap&hl=en
What should we type? Can you try with the above launcher cz' it cannot be launched till it's set as default?
FYI, as we cannot root this 5.3.1, so using the above launcher 'ASAP Launcher' will be awesome as it has built-in widgets. One more is Arrow Launcher by Microsoft.
The other one is Buzz Launcher: https://play.google.com/store/apps/details?id=com.buzzpia.aqua.launcher&hl=en
it's pretty heavy with built-in widgets and themes.
---------- Post added at 03:58 PM ---------- Previous post was at 03:01 PM ----------
I used your previous code from another post for Windows manually: http://forum.xda-developers.com/ama...-remove-default-launcher-amazon-fire-t3288310 , and it allowed to select any installed launcher as default, the issue it doesn't stick when restarted:
Code:
while :
do
kill $!
sleep 1 & pm install -r -d "/system/priv-app/com.amazon.firelauncher/com.amazon.firelauncher.apk" & sleep 20; kill $!
kill $!
done &
exit
#press enter now
ttcontributor said:
First I'd love to thank you for your continuing support to give more launcher choices to the Amazon Fire.
Where can I find and back up the original fire launcher? So if, in the future, we want the fire launcher back, we just install the backup? Any script to run to undo?
About this "Now we need to run a single line of ADB code every time you reboot your device:".
So it cannot be automatically executed?
Click to expand...
Click to collapse
I do not have a working firelauncher, and honestly I do not want it. That step is optional and the only purpose of removing it is so I never accidentally see it for a second.
I am still working on improving this, please feel free to request features!
Yes, it can be automated just not easily.. You would need to install an app and then paste the command in the apps etc. I never reboot my device so it's not a priority for me. Let me know if you have any ideas. It works flawlessly right now, speeds up the tablet.
ttcontributor said:
while trying to adb intall the apk, it shows error: https://www.dropbox.com/s/syyggde0ie7sf4t/Screenshot 2016-09-24 21.58.03.png?dl=0
UPDATE: I got it installed now. The issue above because I ran adb shell first. Anyway, it doesn't seem to shut down the Fire Launcher as I can still see briefly when pressing Home button; and it doesn't allow to set another launcher as default beside Nova. (Fire HD 10 - 5.3.1)
Let's say we want to set a different default launcher to this one: https://play.google.com/store/apps/details?id=com.citc.asap&hl=en
What should we type? Can you try with the above launcher cz' it cannot be launched till it's set as default?
FYI, as we cannot root this 5.3.1, so using the above launcher 'ASAP Launcher' will be awesome as it has built-in widgets. One more is Arrow Launcher by Microsoft.
The other one is Buzz Launcher: https://play.google.com/store/apps/details?id=com.buzzpia.aqua.launcher&hl=en
it's pretty heavy with built-in widgets and themes.
---------- Post added at 03:58 PM ---------- Previous post was at 03:01 PM ----------
I used your previous code from another post for Windows manually: http://forum.xda-developers.com/ama...-remove-default-launcher-amazon-fire-t3288310 , and it allowed to select any installed launcher as default, the issue it doesn't stick when restarted:
Code:
while :
do
kill $!
sleep 1 & pm install -r -d "/system/priv-app/com.amazon.firelauncher/com.amazon.firelauncher.apk" & sleep 20; kill $!
kill $!
done &
exit
#press enter now
Click to expand...
Click to collapse
I love you for being so helpful in the development of this project. You simply change the code to whatever launcher you want, you just need the package name/activity. I also think it would be wise to reboot when running the command since two instances may cause glitches without killing the nohup process.
I will make a tool that simplifies your life, drag and drop launcher of choice apk and it'll set it as default & remove amazon ****ware.
I have released the source code to my alpha project, should work cross platform (need testers who know Python!)
https://bitbucket.org/dylanmulrooney/android-launcher/src
nyln said:
I love you for being so helpful in the development of this project. You simply change the code to whatever launcher you want, you just need the package name/activity. I also think it would be wise to reboot when running the command since two instances may cause glitches without killing the nohup process.
I will make a tool that simplifies your life, drag and drop launcher of choice apk and it'll set it as default & remove amazon ****ware.
Click to expand...
Click to collapse
Great, after reboot and re-run the command I didn't notice the Fire Launcher no more when pressing home, but sometime just a blank screen breifly before going to the set launcher. And it's a wonderful news for "drag and drop launcher of choice apk and it'll set it as default & remove amazon****ware"
FYI, currently I'm combining your method by 1# install your attached .apk to corrupt the Fire Launcher, and #2 use the previous code above to be able to select any launcher installed. It's better because it can detect a new launcher installed from PlayStore and provide the option to select it as default: https://goo.gl/photos/qQzohRJNMEifCkyw6
ttcontributor said:
Great, after reboot and re-run the command I didn't notice the Fire Launcher no more when pressing home, but sometime just a blank screen breifly before going to the set launcher. And it's a wonderful news for "drag and drop launcher of choice apk and it'll set it as default & remove amazon****ware"
FYI, currently I'm combining your method by 1# install your attached .apk to corrupt the Fire Launcher, and #2 use the previous code above to be able to select any launcher installed. It's better because it can detect a new launcher installed from PlayStore and provide the option to select it as default: https://goo.gl/photos/qQzohRJNMEifCkyw6
Click to expand...
Click to collapse
Very interesting. I finished a rough alpha version of drag and drop, I posted the source code but no compiled binaries yet. I will make an option to select the launcher of your choice.
Give me the app name and I'll write a special code for you since nova sucks
nyln said:
Very interesting. I finished a rough alpha version of drag and drop, I posted the source code but no compiled binaries yet. I will make an option to select the launcher of your choice.
Give me the app name and I'll write a special code for you since nova sucks
Click to expand...
Click to collapse
Nova is good if rooted. In this case, ASAP Launcher is unbeatable: https://play.google.com/store/apps/details?id=com.citc.asap&hl=en
OR EVEN BETTER > TOTAL LAUNCHER: https://play.google.com/store/apps/details?id=com.ss.launcher2
nohup logcat -c; logcat | grep --line-buffered 'flg=0x10200000 cmp=com.amazon.firelauncher/.Launcher' | while read line; do am start com.citc.asap; done &
nyln said:
nohup logcat -c; logcat | grep --line-buffered 'flg=0x10200000 cmp=com.amazon.firelauncher/.Launcher' | while read line; do am start com.citc.asap; done &
Click to expand...
Click to collapse
Awesome.
I have been testing a lot of launchers to find one that is customizable with widgets without root, and found Total Launcher: https://play.google.com/store/apps/details?id=com.ss.launcher2
Now settling for this as it has internal / built-in widgets which can be added to Fire OS WITHOUT root and converting the launcher to system app. What is the package code for this one then?
UPDATE:
Code:
nohup logcat -c; logcat | grep --line-buffered 'flg=0x10200000 cmp=com.amazon.firelauncher/.Launcher' | while read line; do am start com.ss.launcher2; done &
It'd be completed if it can be autorun after system restart of packed to an app to tricker this in Amazon Fire itself.
ttcontributor said:
Awesome.
I have been testing a lot of launchers to find one that is customizable with widgets without root, and found Total Launcher: https://play.google.com/store/apps/details?id=com.ss.launcher2
Now settling for this as it has internal / built-in widgets which can be added to Fire OS WITHOUT root and converting the launcher to system app. What is the package code for this one then?
UPDATE:
Code:
nohup logcat -c; logcat | grep --line-buffered 'flg=0x10200000 cmp=com.amazon.firelauncher/.Launcher' | while read line; do am start com.ss.launcher2; done &
It'd be completed if it can be autorun after system restart of packed to an app to tricker this in Amazon Fire itself.
Click to expand...
Click to collapse
I may have a temporary workaround for auto restart. I just don't see how this makes or brakes it. You can paste that command in Terminal Emulator if you don't want to use a computer on reboot.
nyln said:
I may have a temporary workaround for auto restart. I just don't see how this makes or brakes it. You can paste that command in Terminal Emulator if you don't want to use a computer on reboot.
Click to expand...
Click to collapse
Think it depends on the user. For many launching Terminal Emulator and pasting in a command is a PiTA that offsets the benefit of a custom launcher. Technical enthusiasts don't mind so much but they are the minority of the Fire user community ime - even on XDA.
nyln said:
I may have a temporary workaround for auto restart. I just don't see how this makes or brakes it. You can paste that command in Terminal Emulator if you don't want to use a computer on reboot.
Click to expand...
Click to collapse
Well, at least we don't need to rely on the computer no more! And it will be a set-it-and-forget-it if we input the command to the Terminal Emulator to auto execute?
And about the ppl using Fire OS, there are still many out there. Once they know it can be customized to their liking, they will pop up!
ttcontributor said:
And about the ppl using Fire OS, there are still many out there. Once they know it can be customized to their liking, they will pop up!
Click to expand...
Click to collapse
FireOS is a solid alternative to more 'traditional' Android presentations once ads, bloat and other Amazon cruft is tamed. The ability to toggle launchers on non-rooted devices will be welcome by many if it can be made largely transparent once implemented.
Thanks for your feedback guys. I am working on an update that will simplify your lives.
nyln said:
Thanks for your feedback guys. I am working on an update that will simplify your lives.
Click to expand...
Click to collapse
Which code can I paste to the Terminal Emulator to not use the pc then? Then we can have the Emulator auto run the script when reboot?
Back to Firelauncher
nyln said:
Source code to an alpha tool in Python-QT, if you guys are python savvy show some love <3
https://bitbucket.org/dylanmulrooney/android-launcher/src
In this thread you will finally be able to remove Amazon's terrifying FireLauncher for good, and replace it with your choice of a launcher.
Prerequisites:
Install ADB
Install Nova Launcher / launcher of choice
BACKUP YOUR FIRELAUNCHER.APK
You do not need to corrupt the firelauncher as I have, but it eats system resources and I never want to see it pop up. I have attached a modified version of the firelauncher APK. You will need to download and install it as an update via ADB.
(this is optional, you wont have any launcher after doing this! backup your old APK!!)
Code:
adb install -r -d com.amazon.firelauncher.apk
... as you can now see this will -r reinstall and -d downgrade the launcher, causing it to crash and never open.
Now we need to run a single line of ADB code every time you reboot your device:
Code:
adb shell
Code:
nohup logcat -c; logcat | grep --line-buffered 'flg=0x10200000 cmp=com.amazon.firelauncher/.Launcher' | while read line; do am start com.teslacoilsw.launcher/.NovaLauncher; done &
Code:
exit
This is designed (in combination with destroying firelauncher) to allow you to set any launcher, by default I have it set to am start Nova Launcher.
Once you paste that line of code in adb, you can unplug your device and use it with your new custom launcher!
Please feel free to contact me for detailed instructions!
Click to expand...
Click to collapse
How do I revert back to Firelauncher?
imblogr said:
How do I revert back to Firelauncher?
Click to expand...
Click to collapse
Recommend you reload FireOS via stock recovery as it is not clear how to fully revert the changes. Sure, you could read through the instructions and figure it out...starting from scratch will probably be quicker with better outcomes. The OP has not posted for awhile; not sure he/she is still around.
/!\ You must know how to use adb (Android Debugging Bridge) in order to do this
adb is downloadable here https://developer.android.com/studio/releases/platform-tools.html
Alcatel Qualcomm USB adb driver here http://www.alcatel-mobile.com/car-en/support/faq/usbdriver.html
You must enable developper settings and usb debugging
Navigation Bar
I found a hidden Settings Activity that allows you to change your navbar buttons order. You can launch it using Nova Launcher->Add a widget->Activities OR by usins the app "Activity Launcher" from Play Store. It's under the package name "Status Bar" and it's name is com.android.systemui.navigationbar.NavigationBarSettingsActivity.
When you change the buttons order, it will take effect for portrait AND Landscape. So by default the landscape orientation has the opposite order or portrait, this will make the same order for both when you change settings.
If you want to revert to stock, you must use adb to clear "com.android.systemui" settings. The command is:
Code:
adb shell pm clear com.android.systemui
. Then restart phone immediatly when the operation is done.
SystemUI Sounds
I suggest you create a "media" folder at the root of your phone internal storage. Inside this folder, put a folder named "ui". Inside the "ui" folder, put some ogg soud files: "LowBattery.ogg", "Lock.ogg", "Unlock.ogg".
I guess mp3 format is OK but Android uses ogg by default. You can use Audacity to convert to ogg.
Your storage should look like this:
/storage/emulated/0/media/ui/Lock.ogg
/storage/emulated/0/media/ui/Unlock.ogg
/storage/emulated/0/media/ui/LowBattery.ogg
Then we have to tell the system to use the files. We'll use adb.
Execute these three commands, one by one:
Code:
adb shell settings put global lock_sound /storage/emulated/0/media/ui/Lock.ogg
adb shell settings put global unlock_sound /storage/emulated/0/media/ui/Unlock.ogg
adb shell settings put global low_battery_sound /storage/emulated/0/media/ui/LowBattery.ogg
Then restart the device.
If you want to change the sounds, you don't have to use adb anymore, just replace them on your internal storage.
You can find some SystemUI sounds from xda, rom dumps, .deb cydia packages (if you want iphone lock sound) (just extract using 7zip), Google...
Hi, I've tried that method to change the lock and unlock sound and the only thing I've achieved is that no longer hear any sound when lock or unlock the phone. What can I do to undo what I have done?
What command should I use?
Thank you very much for your attention.
I had used this method before on other phones and it worked without problems.
Hi,
Beep'nGo is not supported anymore.
But it's not clear what app could be used instead which would be compatible with preinstalled Beaming Service for Samsung.
Samsung Pay is not available World Wide. App even can't run if installed from apk.
What about other popular Loyalty Card apps? Which apps use Beaming Service?
Thanks.
Beep'nGo still working
I think Beep'nGo was the best loyalty card app. I have a Galaxy Note 3 and even though the app was discontinued earlier this year it still works on my Note 3. I can still add cards locally to the app and the beaming still works. I have been trying to figure out the file structure so that I can preserve the functionality in case something happens to the phone. I have searched the folders and I can't find a mobeam, beepngo or derivative naming file structure. So the question is how does it work. Where are the install files. Any ideas?
the app is still working ,sort of.
if its already installed, it works fine.
But ive just got a Note 8 & unable to use the app so far. Im gutted & I love this app. It works great all the time o my other devices.
I just cant log in at since installing the app.
I get an error 'you are not connected to the internet'. Ive tried all sorts with no luck.
I also tried to find the data file for the app, I found the file for it named COM.MOBEAM.BEEPNGO, then theres a sub folder named CACHE, but thats empy!
Im at a loss how to log in and get this app working on my new phone. Its frustrating as its perfectly fine on my S7 Edge, but I need to give that phone to my partner soon.
someone here must know something on this surely?
Im not in USA so cant use samsung pay or those affiliated apps
pinkbellbird, you can't logon becuse app is discontinued. Nowere to logon. No coud backup.
You can use it by adding new cards every time you reset to factory. Otherwise it's working.
I have Samsung Galaxy Note 3 and love that app, using it all the time. Also I use Titanium Backup for it and restore data every time I play with roms or reset to defaults.
Would like to know if there is alternative for this app that use beaming though.
Samsung Pay is the only other app that I have read of that includes the beaming tech.
As I do not have a Samsung at present, I would be quite interested to know if something is available for phones, at large, that incorporates the beaming tech.
If there was a way to make Samsung Pay work in my country.
Sent from my SM-N910C using Tapatalk
Beep n go on S8
I had the same trouble with my new S8. Just install the app sending it via Bluetooth from old to new phone and then scan the cards directly with new phone from old phone as it was physical card. Then installing widget on new phone you will bypass the logon error.
Still no one found a way to export the cards stored into discontinued Beep n' Go app so they can EASILY be imported into other apps like... Samsung Pay?
We find ourselves in the same position as you. The way I managed to solve the problem, now that I am one step away from making the change to a note 8 (from a note 3), it is to make a copy of the system and user data with the Note root and using the Titanium Backup, and the new phone will reload the Beep'N'Go program. With total reinstallations of Note 3 it has worked, I hope it also does note 8!
Steps to migrate BeepnGo including data from old to new phone
install ADB ( developer.android.com/studio/command-line/adb ) on your PC
Open cmd window in the folder where ADB is located
on old phone: enable USB debug option in developer options
connect old phone to PC ( watch for question popups on phone and answer them)
check if phone is visible to adb : adb devices
commands:
adb backup -apk com.mobeam.beepngo ( watch for question popups on phone and answer them, if your phone is encrypted it will ask for a password (use simple password like the letter 'a' . This command will create a file backup.ab in the current folder)
[the previous command should have backed up the apk as well. However on my phone this did not work so we need some more steps to copy the apk too:]
adb shell
pm list packages -f | grep mobeam
will show the path where the application is stored (in my case:
package:/data/app/com.mobeam.beepngo-2/base.apk=com.mobeam.beepngo )
copy the apk to a folder which is visible on PC:
cp /data/app/com.mobeam.beepngo-2/base.apk /storage/self.primary/Download/beepngo.apk
exit
(you are back at the normal cmd window prompt, don't close the window yet)
Now on PC open windows explorere, navigate to your phone devices Download folder and copy beepngo.apk to a folder on PC
Disconnect old phone
on new phone: enable USB debug option in developer options
Connect new phone (watch for question popups on phone and answer them)
Copy beepngo.apk to the Downloads folder of the new phone
On phone use file manager, navigate to Downloads folder and run the beepngo.apk to install beepngo
On PC go to the command window:
check if new phone is visible to adb : adb devices
adb restore backup.ab (this will restore the beepngo files, watch for popups on your phone and answer quesitons. if you had to enter a password for encryption, please enter the same password again )
Start beepngo and the data from previous phone is visible
:laugh: :victory: :laugh: :victory: :laugh: :victory:
OH MY GOD!!! IT WORKS!!!!!
so I will not have to root the new note 8! Thank you very much! Really !!!!
:laugh: :victory: :laugh: :victory: :laugh: :victory:
MisterKosmos said:
install ADB ( developer.android.com/studio/command-line/adb ) on your PC
Open cmd window in the folder where ADB is located
on old phone: enable USB debug option in developer options
connect old phone to PC ( watch for question popups on phone and answer them)
check if phone is visible to adb : adb devices
commands:
adb backup -apk com.mobeam.beepngo ( watch for question popups on phone and answer them, if your phone is encrypted it will ask for a password (use simple password like the letter 'a' . This command will create a file backup.ab in the current folder)
[the previous command should have backed up the apk as well. However on my phone this did not work so we need some more steps to copy the apk too:]
adb shell
pm list packages -f | grep mobeam
will show the path where the application is stored (in my case:
package:/data/app/com.mobeam.beepngo-2/base.apk=com.mobeam.beepngo )
copy the apk to a folder which is visible on PC:
cp /data/app/com.mobeam.beepngo-2/base.apk /storage/self.primary/Download/beepngo.apk
exit
(you are back at the normal cmd window prompt, don't close the window yet)
Now on PC open windows explorere, navigate to your phone devices Download folder and copy beepngo.apk to a folder on PC
Disconnect old phone
on new phone: enable USB debug option in developer options
Connect new phone (watch for question popups on phone and answer them)
Copy beepngo.apk to the Downloads folder of the new phone
On phone use file manager, navigate to Downloads folder and run the beepngo.apk to install beepngo
On PC go to the command window:
check if new phone is visible to adb : adb devices
adb restore backup.ab (this will restore the beepngo files, watch for popups on your phone and answer quesitons. if you had to enter a password for encryption, please enter the same password again )
Start beepngo and the data from previous phone is visible
Click to expand...
Click to collapse
My backup.ab has 0 Kbytes. Any ideas?
rexator said:
My backup.ab has 0 Kbytes. Any ideas?
Click to expand...
Click to collapse
Are you sure that you have the latest version of MoBeam? I tested it on the latest version.
What does these command give as output?
adb shell
pm list packages -f | grep mobeam
Thank you MisterKosmos! Great help, works perfect. Looked complicated at first, but was really easy thanks to your great tutorial. 5 min work to get beep n go from my S8 to S9.
Do you think it would be possible to export the database to another format so to import into let's say Samsung Pay?