so i just flashed the AmeriCanAndroid rom and everything is running smoothly. the only issue is that the screen is very small. like the notification bar is so small i can hardly see it. the lock screen is a little bigger then a US stamp. i searched the original thread but there are over 1500 pages and the search function yeilded no results . so how do i fix the screen size?
The very first page of ACA thread says
"-Starting with 080111 and later, users can edit /sdcard/android/startup.txt prior to booting to adjust LCD_DENSITY, GPS_ZONE, and DATA_SIZE (data.img)
(ie: the default lcd_density of ACA is 167. Edit the lcd_density= value to 240 to get standard sized icons and fonts)"
The part you're looking for is to change the value to 240.
I do agree, its a plague to look through that thread and search ain't no help if you don't search right
RE: Wrong Section
Hi...please put this in the questions and answers section...iron fist will be on you ...here are some solutions I found by simply using the search:
You can increase the density (sort of like changing monitor resolution) on your screen by simply changing the build.prop file. This gives you more viewing area on your screen. The build.prop file contains many user variables that are editable and one of them is the LCD Density. The lower the number, the higher the resolution. The default value is 240, but by simply changing it to 200, you can increase the resolution and see more emails in your email app, more app listings in the market, more room for widget alignment, crisper graphics, and much more!
PERMANENT ROOT SOLUTION:
now that we can do perm root, you can permanently change this by modifying your build.prop file located /system/build.prop. look for ro.sf.lcd_density and modify the number and save and reboot.
Recommended value is 200, though many users like 190. If you are unsure what you like, please try TEST MODE shown below!
Please be sure to download Spare Parts from the Market, and disable Compatibility Mode in the app. This will fix many, many apps from not displaying full-screen, however there are some apps that will not re-size.
This works really well if you pair it with something like Launcher Pro or ADW.Launcher, where you have control over rows/columns and resizing widgets.
Easiest Method -- Go to Market and download one of the LCD Density apps. Search "LCD Density."
Phone-Only Method:
You can use Root Explorer, or any text editor like notepad++ or text edit.
1. Open a File Manager and locate /system/build.prop
2. Make sure "/system" is mounted as R/W (in Root Explorer, click the Mount R/W button at the top.)
2A. MAKE A BACKUP!
3. Open and Edit the file.
4. Find ro.sf.lcd_density=240 and change it to desired value (recommend 200 or 190 for G2).
5. Save the file.
6. Exit and Reboot!
If you use a separate text editor, just copy the file to your SDCard, edit it there, and move it back and overwrite the original. I recommend backing up the original just-in-case.
ADB Method:
at the cmd prompt:
1. adb pull /system/build.prop
2. Go to SDK / Tools folder and open build.prop in a text editor (recommend WORDPAD for Windows).
3. Find ro.sf.lcd_density=240 and change it to desired value (recommend 200 or 190 for G2).
4. Save & Exit
5. go back to cmd prompt and type: adb shell mount -o remount,rw /dev/block/mmcblk0p25 /system
6. type: adb push build.prop /system/
7. exit and reboot phone!
hope this helps you out
Or if that doesn't work, go to spare parts and uncheck "compatibility mode" then reboot phone
Pansi SMS screen size issue
I am using american android 2.3.7.
I have installed Pansi SMS application for messaging but some how it is not coming on the fullscreen of HD2. It is just capturing upper middle part of the screen Neither am i able to open the settings of Pansi SMS. Even the windows key is not working to open its setting.
How can i resolve this.
Is there any other SMS app as good as PANSI ?
When I originally bought the Nook HD+, I made several futile attempts to get ADB working so I could sideload apps to it. I was so frustrated that I was ready to give up and return it. But I finally got it going and with the help of a few smart users here was able to get it rooted and installing apps directly on the device. So, to save some other users the same frustration I had, I thought I would outline what I did to make this device hum.
Update 12/27/2012: A lot has changed since I first created this tips thread. I am updating it to the latest information. Most of the steps below are not necessary anymore since I now have a new thread here which lets you do these things easily with a special version of ClockworkMod (CWM) recovery for the HD and HDplus. And the text here has been modified to reflect that and include the HD.
Update 11/02/2013: Since B&N has included the gapps and Play Store in version 2.1.0 and above and since verygreen developed the new boot.img that removes B&N /system file protection scheme and I updated my HD/HD+ CWM thread to account for those changes, I decided to give this thread an update. I have added comments to the sections in italics below where necessary
If you have questions or comments on this post, reply to this thread. Please do not send me private messages or emails. By posting in the forums others get a chance to help you and if I answer your question in the forum, others can see my response and it may help them too.
1. Setting up ADB
ADB is very useful for many things but you do NOT need ADB to root anymore. Look at my thread referenced above to use CWM to root.
Also, rather than use ADB via USB, it is much easier to use a Wireless ADB app available in the Play Store.
If you want to know how to set up ADB with USB, click on the "show content" button below.
The first thing you need to do is get ADB working on your PC so that it can connect with the HD+. The instructions to do that is on B&N's own site here. (But you really don't have to do all that, see below). To make it easier for XDA users, I have attached to this post the drivers downloaded from B&N site. Download and unzip that file to your PC.
To install the drivers, do the following (I tested this on Windows XP and Windows 7):
1. On your HD+ go to settings, device information, developer options, and make sure check "Enable ADB" is not checked.
2. Plug in the device to the PC with the USB cable. MTP should install.
3. Unplug the device, go to settings again and check 'Enable ADB'. Plug back in.
4. New devices will try to install. When they do, work your way through the options until you get to the choice "include this location in search" (the terminology is a little different in Win7) and browse to the location you unzipped the driver files above. Continue and the driver should install. In Windows 7 just one device will pop up. On Windows XP, two may. (Edit: If you are having trouble with this step, go to the B&N link I have above and read and follow section 4.6 of that guide. You can skip section 4.6.2 since you unzipped those drivers earlier. But do all of the remaining steps in section 4.6).
5. An "Android Composite ADB Interface" will install. If the computer says it needs to reboot to finish. Do it.
6. If, when it starts back up, and after installing ADB below, it does not work, you may need to go the Device Manager and look to see if "Android Composite ADB Interface" device has a yellow exclamation point by it. If it does, update the driver with the B&N driver again.
7. Create a file named adb_usb.ini and put 0x2080 in it with no line feed or carriage return. Go to \documents and settings\ and open your users folder and create a folder named .android and put that file in it.
8. I have attached a file named adb.rar below. Just unrar the adb.rar file. There will be three files there that you can put in a directory (any name you want).
9. Open a command prompt and cd to wherever you copied those adb files. If you set your path to that directory, you can have the prompt set for any directory, like where your apks are stored. Type 'adb devices'. It should go through some commands ending with a list of devices connected. The serial number of your HD+ should be listed. You can now run ADB commands.
2. Sideloading Apps
Once Unknown Sources is activated by my CWM zip above, you do not really need to install apps this way anymore.
Once you have ADB connected to your HD/HD+, it is very easy to sideload install apps. Just have your command prompt set to the location that you have your apk's stored and type "adb install xxx.apk", where xxx.apk is the name of your app. It is best to name the apk to something simple with no underlines or special characters in the name. It does not matter what you name it, the real name is inside the apk. The app should install. I would start with a launcher app since sideloaded apps cannot be seen in the stock launcher. Then I would install AnyCut which I have attached to this post. This app allows you to put the Home command on your launcher's home screen so that after you make your launcher default, you can get back to the B&N home page. There is a trick mentioned in the B&N guide referenced above that lets the stock app drawer see your sideloaded apps. On the Apps screen, hold the volume up button while you press the "Apps" word at the top of the screen for 2-3 seconds. An "Extras" screen will pop up showing all of the sideloaded apps. You have to do this every time you want to see it.
3. Rooting the HD/HD+
Rooting is now very easy using CWM in the referenced thread above. If you want to use the older manual method, click on the "show content" button below. But be warned these older methods no longer work on version 2.0.5 or newer.
Verygreen came up with the original scheme to root the HD+. But it had a problem. The HD+ checks on boot to see if /system has changed, and if it has, it will not boot. It tries this 8 times and on the last time the "8 failed boot" procedure kicks in and your device is wiped clean (including your storage space) and the factory ROM is re-installed. He later modified it to survive a reboot. Someone0 developed another scheme where he can root without modifying /system directly. So the next time it boots, it boots normally. See his thread here.
ONCE YOU HAVE ROOT, DO NOTHING THAT MODIFIES /SYSTEM OR IT WILL NOT BOOT AND END UP RESETING ITSELF. Also do not install anything that installs to /system, like busybox, AdFree and a few other apps. Ignore this warning with Universal Root rev3 or higher.
4. Setting OTA (Over the Air) Updates from B&N to Manual
When you first register the HD/HD+ it will automatically update itself to the latest version. To protect yourself against further updates that might jeopardize your ability to root or add other mods, you should try to block further automatic updates. But it seems that making this mod is no longer effective, B&N updates anyway.
Again, I have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below.
EDIT: (2/22/13) I have a new way to block OTA that seems to work so far. Another user (thanks greenya!) discovered this and I have come up with a way to implement it. I use the app AdAway to put my own black list of sites to not allow access to. If you want to try this, you must be rooted. Get AdAway either on the 1mobile.com market or at its developer's site (http://code.google.com/p/ad-away/). Before you do anything go to its preferences and change the target hosts file to /data/data/hosts. That way it will not reset the device. Then go to "Your Lists". Add this site to the black list: su.barnesandnoble.com. Then go to the main menu and select "Download files and apply ad blocking". It will ask you if you want to add a symlink, say yes. (If you installed the new boot.img from verygreen or flashed my latest version of Universal Root (rev3 or higher), you do not need to worry about adaway resetting your device. Just install it normally.)
It does not seem to block any B&N shopping or downloading apps or books. I installed this on my 2.0.5 and purposely tried to update and it says it needs the update but pushing download does nothing. Then I unblocked it and pushed download and it started to download immediately. So it does work.
Basically the same method used on the Nook Color and Nook Tablet should work on the HD+. It requires that you edit a database file and that requires root access. I use the paid Speed Software's SQLite Editor. You need to use the latest version (2.0.1). I could not get my older version to get root access.
So here is a description on how to do it with SQLite Editor. Open the app and it should get granted superuser access. Then browse with it to /data/data/com.bn.devicemanager/databases. There should be a file there named "devicemanager.db". Open that with SQLite Editor. There should be a list down the left side, one being "registry". Click on that. A table opens up that looks like a spread sheet. On line 6 is com.bn.device.fota.mode. Scroll across till you see the value column. It should say auto. Edit that to manual. Save the database and you are done.
This worked on the other Nooks, so should work here. See the post below for another automatic method.
5. Setting Up Installing from Unknown Sources
I also have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below.
You can toggle the unknown sources using the same method as I used for blocking OTA. Just look for the database in /data/data/com.android.providers.settings/databases. The database is settings.db. Open secure and line 4 - install_non_market_apps and change the value to 1.
6. Setting up Google Play Store and Google Apps
I also have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below. If you have stock version 2.1.0 or higher you do not need to flash my zip. Play store is included in the ROM.
Someone0 has a post on how to add Google Play Store is here. And he now has it so you can install the entire Gapps package, including Play Store. Again, you must be rooted first.
7. Setting LCD Density
If you are like me, you hate the tiny fonts on these high resolution devices. You can change the default lcd density to help with that. The default lcd density for the HD/HD+ is 240. I changed it to 300 and everything works fine on the HD+ and fonts are a little larger. But you cannot modify build.prop on /system to do that. It will cause the device to reset itself since you are modifying /system. To get around that, create a file in /data named local.prop. Add the following line to that text file:
qemu.sf.lcd_density=300
Then reboot and your new density is set. You need to be rooted to do this on the device.
I found that changing the density on the HD made the SystemUI app crash. If you want larger fonts for the HD, I recommend you use the tip in the next section.
8. Larger System Fonts
If you don't want to set your LCD density higher but you still want larger fonts, a user (Windsor1959) just passed on this tip. Go to the B&N app store and install the free app Go Read. Once that is installed, open it and use the menu to go to accessibility settings. There is an option for larger system fonts. It works great. Thanks Windsor1959.
I also just discovered that there is another hidden setting that lets you set the system fonts from small, normal, large and huge. To get to these settings you need a third party launcher like zeam or adw and the AnyCut app I attached below. On the launcher screen long press and select shortcut. Select AnyCut from the list. Within AnyCut select activity and scroll down to fonts. Select that and a fonts shortcut will appear on the launcher screen. Open that and you can select the font size.
9. Data structures on the HD/HD+
For those of you used to having two separate partitions for data and media files, B&N has used a different scheme for the HD/HD+. They make one very large /data partition ranging from 5GB to 28GB depending on which device you have. Then they create a folder in /data (/data/media) and, using the sdcard fuse feature, link it permanently to /sdcard. So that means it is one big dynamic space for both /data and /sdcard, sharing the free space. /data is considered root and /sdcard is not.
They named it /sdcard because a lot of third party apps expect there to be an sdcard on the system and won't run unless there is one. That creates a little bit of a terminology problem for us Nook Color users. We are used to having /sdcard be an external SD. And on top of that, if we do add an external SD, it is mounted as /ext_sdcard under /mnt and that is hard for some apps to see. And when you connect your device to your PC with MTP, internal media (sdcard) is called 'internal memory' and the SD (ext_sdcard) is called 'SD card'. I think B&N did this with the expectation that users would not be rooted and be able to see that stuff under the hood.
Since sdcard is really just a part of /data, it is formatted as ext4 instead of FAT32 like the Nook Color media partition was. That means you can store a single file larger than 4GB, which is the limit for FAT32. Most external SD cards are formatted FAT32 so they are also limited to a single file size of 4GB. But it makes them directly readable by your Windows based PC. When you first put a new external SD in the HD/HD+, it asks you if you want to reformat it so you can more easily store your media files. If you say yes, it will format it to ExFAT, a new flash drive format that supports larger file sizes. That's good for your media files since you can have very large files on it. But it could be bad if you want to take the card out and put it in your Windows XP PC because XP cannot read it without an update patch from Microsoft. If you have Vista or higher, ExFAT can be read natively.
When you do a factory reset (clear /data) your media directory (/sdcard) is wiped out too.
Also, the B&N media, books, magazines, etc., are stored in /data/nookmedia, which is root.
10. White on White Text for Some Apps
One of the annoying issues with using some third party apps is the HD/HD+ displays some dialogue boxes with white text on a white background so that the text is unreadable. Someone0 and I developed a patch that can repair this. I have a zip in my CWM thread referenced above to repair the HD+ and HD. (Also since stock version 2.1.0, B&N has dramatically changed the color scheme so that the white-on-white issue is no longer the problem it used to be, I have discontinued providing white-on-white mods for version 2.1.0 and above.) If you want to see how to do it manually, click on the "show content" button below.
Someone0 and I have been working on this and have found a solution. It requires a modification to the framework-res.apk on /system. And the mod works very well. The problem is that the apk is on /system and must be symlinked using our symlink trick we use on /system files when we need to modify them. That is easy to do, but this particular apk is very critical to your system. If you do not get it installed properly, it will lock up the device and you either need to reset it completely or repair with ADB.
If you are tech savvy enough you could modify your own apk and install it. In the colors.xml file in the values section of the de-compiled apk, are two settings that need to be changed, "background_light" and "background_holo_light" need to be changed to "ffcfcfcf". The color choice was a compromise between making the text dark enough to be seen against a white background and bright enough to make things like menus show in the grey backgrounds. Re-compile and put the apk in /data, delete the apk in /system and symlink to the one in /data. The problem with doing it manually while running is as soon as you delete the apk, things go bonkers. And you cannot add the new symlink until the original apk is deleted. If you start messing with this mod, be sure to have ADB enabled so if it locks up and gets stuck on booting, you can access things with ADB and hopefully repair it. When I did my system manually, I copied the modded apk to /data with root explorer, used root explorer to set /system to read/write, then used ADB to delete the apk in /system and create the symlink. If you mess up, it will boot, but get stuck at the 99% level. Hopefully if you left ADB enabled, you can use ADB to repair whatever is wrong.
11. Implementing Userinit.d
Userinit.d can be used to run specialized scripts as part of the boot process. The HD/HD+ does not implement userinit.d, but it can be modified to allow it. And these scripts can be used to customize the performance of the device, like modify fonts, change colors, add symbolic links, modify drives, set CPU speeds and tweaks, etc.
I have implemented userinit.d in the new Universal Root zip in my referenced CWM thread above. (The latest version no longer uses it).
The scripts are usually named with numbers at the beginning and no extension. Examples would be the scripts from CM7 init.d which are: 00banner, 01sysctl, 03firstboot, 05mountsd and others. They are executed in the order of the numbers. They are plain text files that have as the first line:
#!/system/bin/sh
Then they have script commands in text format.
The beauty of these scripts on the HD/HD+ is you put them in /data instead of /system which would reset your device. Put the script files in a new folder named /data/local/userinit.d. Set the script file permissions to execute.
There are examples of userinit.d scripts out there if you search for init.d scripts on XDA or the web. Some will work on the HD/HD+ and some won't. I have a great example in the next section.
12. Swapping "sdcard" and "ext_sdcard"
I now also have this modification as a flashable zip in my CWM thread linked above. No need for root with that one.
As explained in section 9 above, the internal media is named "sdcard" so that apps can store their files there. Some users would like them stored on their external SD. I have a userinit script that will swap "sdcard" and "ext_sdcard" so that apps will store their files on the external SD. The external SD will show as "sdcard" and the internal media will show as "ext_sdcard". And it shows swapped using MTP also. It can be a little confusing since we cannot control the names, but they are swapped. If you don't have an external SD plugged in, both sdcard and ext_sdcard will show the internal media.
To swap the drives, make sure userint.d is implemented, then download the attached file, 11SDswap.rar, and extract it and put the file in /data/local/userinit.d. Set the permissions of the file to execute in all three boxes. On the next reboot, they will be swapped. To return to normal, just remove the file and reboot.
13. Skipping OOBE (Out of Box Experience)
Skipping OOBE is when you want to skip the registration step when you first start your device or after a reset. Not registering means that you will not be able to buy books or apps from B&N or, if you already have an account, have access to already purchased items. Your name will show as TEST (which can't be changed). And, if you set up wifi, the device will still check for updates and if found, update.
So if you don't want to register, or that device is already registered to someone else and you can't, just skip OOBE. There are instructions for the Nook Color here. They still work for the HD/HD+.
14. Back Up Your Stock ROM Installation with CWM v6.0.2.8 for Nook HDplus and v6.0.2.7 for the HD
Now you can backup your stock installation with my bootable CWM (ClockworkMod) recovery SDs. That way you can restore if you make a mistake and change /system so the device starts to reset itself. Just catch it before the reset completes, insert the card and restore and you will be back to OK.
You can do anything with these CWM SDs you normally would do with CWM, (nandroid backup, wipe system, data, cache, dalvik-cache, fix permissions, etc).
One of the nice features is you can wipe /data without it wiping your internal media at /data/media. So, if you want to reset, just wipe /data and your media files are still left intact. And when you do a nandroid backup, it can be placed either on internal media or your external card. The nandroid backup feature backs up /boot, /system, /cache and /data (without the media folder). So if you want the media folder backed up you must do it manually from within stock. And when you restore, you can selectively restore any partition. So if you mess up /system by putting something there that causes a reset, just selectively restore /system.
EDIT (5/22/13) - There is a new procedure brought to my attention by another user (thanks fanoush) which lets you make the CWM SD without burning the image. It seems the OMAP4 devices are a little more liberal on the booting requirements than previous OMAP devices. This makes it easier to install on any size SD. Go to my HD/HD+ CWM thread linked in my signature and look at item 1a. There are instructions and files there.
The versions attached below are under 120 MB so they can be put on any size SD. It burns very quickly. But there is no room there for any backups. After burning the SD you can use partitioning software (like Mini-Tool Partition Wizard or EaseUS Partition Manager, both free) to expand it to the full size of your SD card if you want so there would be plenty of room for backups. But be sure to only expand the back end of the partition, being careful not to touch the beginning.
I also now have a 4GB versions for both the HD and HDplus attached to the CWM thread referenced above.
To make the SD, download the version for your device and extract the file. It should be a 120MB .img file. Burn (write) that image file to your SD card using Win32diskimager in Windows. In Linux or OSX (Mac) use the "dd" command.
To use Win32DiskImager, find it on the web (here, it's free) and install it on your Windows PC. Open it (be sure to run it as administrator) and select the drive (device) that has your card reader with your SD inserted. Then in the image file box put the location where you have the extracted img file. Then when everything is set right, click on the write button. A warning will pop up asking if you want to proceed. When you have verified that you are going to write to the correct device, click on Yes. (One user overwrote their external USB hard drive by not verifying first). With the small version it should burn fairly rapidly. If you get an error message about access denied, it means you are looking at the drive with Windows Explorer. Close Windows Explorer and try again. In fact, it is a good idea to close all unnecessary windows when burning, even your browser.
Insert the SD into your powered off Nook HD/HD+ and power on. It should boot to CWM with the label v6.0.2.8 for HD+ stock. The HD version just says v6.0.2.7 for Stock. You can tell it is booting properly if the cyanoboot logo shows up after the Nook logo shows for a few seconds. If the Nook logo stays there and starts changing, it means it is booting to stock. Hard power off by holding the power button for several seconds. Try again.
Manipulate the controls with volume up/down for cursor, n key to activate and power key for back.
15. Modifying System Files on the HD/HD+
Ordinarily you cannot modify system files on these devices because they will detect the change and reset themselves back to factory stock, wiping out all your data at the same time. But there is a safe way to do it if you are rooted.
If you have installed my new Universal Root rev3 or higher or installed verygreen's boot.img, the below procedure is no longer necessary, just modify the files directly.
The HD/HD+ has a manifest file included in the boot files that has a listing of each file that is supposed to be in /system and a checksum of each file. On boot, it reads the files in /system and makes sure each file that is there is on the list and matches the checksum. It ignores directories, symlinks and missing files. If one is added or has the wrong checksum, it stops and tries to boot again. If it reboots 8 times in a row without completing the boot, the automatic reset feature kicks in and your device is formatted and the factory ROM is reinstalled.
So you can see that missing files are OK and symlinks are OK. So if you want to modify a system file, first copy it to /data somewhere, delete the original, and make a symlink in /system to replace the deleted file. The symlink points to the file copied to /data. But be careful, some files, like framework-res.apk, are being used all the time and if you delete it, even temporarily, the system goes crazy.
The scheme that someone0 and I use is to mimic /system under /data/su so that the structures are the same to avoid confusion. For example, if you wanted to modify build.prop, it would be copied to /data/su/system/build.prop and the symlink would point there. Since build.prop is not used very often, it is safe to now modify it however you want. But be careful, some settings there are vital, like hardware rotation. Mess with that and things will go all wonky on the next reboot.
Here are the specific commands to make this happen using build.prop as an example:
1. Use your root file manager to copy /system/build.prop to /data/su/system/build.prop. Set the file's permissions to match the original.
2. Delete /system/build.prop also using your root file manager
3. Set up Terminal Emulator. Start the program and type su enter. After you allow superuser access, the prompt turns to #
4. Type the following command at the # prompt (without the quotes):
"mount -o remount,rw /system"
5. Then this command:
"ln -s /data/su/system/build.prop /system/build.prop"
(That first letter is a lower case L)
6. Then this command:
"mount -o remount,ro /system"
You are done. You can now modify build.prop in /data any way you want and the system will not reset.
But before you do this mod or any other system file mod, I recommend you have backed up your system using CWM as described in the previous section. That way if you did not get it right somehow and it starts to reset, you can insert your CWM card to stop the rebooting and selectively restore /system and try again.
One side benefit of doing this build.prop mod is if B&N tries to update you in the future, it will fail because it cannot verify your build.prop because it is missing. And, in my experience, it does not try again.
16. Nook HD/HD+ internal partition structure and backups
The partition structure for the HD/HD+ is the same and is as follows:
Code:
P# Name Size Type
1 xloader 128K Fastboot Image
2 bootloader 256K Fastboot Image
3 recovery 15MB Fastboot Image
4 boot 16MB Fastboot Image
5 rom 48MB vfat
6 bootdata 48MB vfat
7 factory 448MB ext4
8 system 672MB ext4
9 cache 464MB ext4
10 data varies ext4
There is a simple process to make image backups of your internal partitions. Most people will never have to use the backups, but there is one critical partition that holds vital device specific information that was created at manufacture that is probably wise for you to back up. The process requires that you have either Terminal Emulator installed or ADB set up. And it can be done either in rooted stock or CM10/CM10.1. In Terminal Emulator or ADB Shell in superuser mode, type the following command:
dd if=/dev/block/mmcblk0p7 of=/mnt/sdcard/factory.img
This will make an image of your partition 7 that has that vital information. It also has a copy of the factory.zip file used to reset your device should you need to. If you want to back up the rest of your partitions, just change the p# and file name in the above commands to match the listing above. Partition 10 is quite large so should not be backed up using this method.
To restore a partition, just reverse the information following the if= and of= statements in the command. The information stored in partitions 1, 2, 3, 4, and 8 is specific to the ROM version you were running when you made the backup, so restoring them to another version is probably not a good idea (and if you do, restore all 5 of them together). Only do it if it is a last resort. And of course you should not restore HD partitions to the HD+ and vice versa.
Enable Unknown Sources and Blocking Auto OTA made easy (updated 12/3)
Instead of making a new thread, I have decide to make the tips that already available, but hard to use and make it simple.
So, what is it? This little thing will set Enable install from Unknown Sources and change the auto update to manual update for Nook HD ROM. I keep hearing how people are saying they have hard time making these changes so, I make it pretty dead simple. It's as simple as I can make. If you are looking at the timeline, root first, then this, and then gapps after. I now make them all so simple that it take me like 15mins to do all those 3 things from scratch. Originally I grab the sqlite3 from one of the app, which I guess I shouldn't have. Now I replace it w/ the one from CM9, which I guess is okay. And smaller size too.
If you were using verygreen version of root, try running this first.
Code:
adb shell su -c "/data/su/busybox chown shell.shell /data/su"
Pre-Requisite:
ADB and root.
NEW Instruction:
download the settings_new.zip in the attachment and save it somewhere.
unzip it.
run install.bat (for windows)
OLD Instructions:
download the settings_old.zip in the attachment and save it somewhere.
unzip it.
run install.bat (it basically just upload settings.sh and sqlite3 and change their permission, if you are on linux just do that instead)
adb shell
su
/data/su/settings.sh
*** OLD TEXT ***
While it's true that we should put heavy emphasis on not touching /system and that is not just manual works, but also any app with root access. You could be installing something like busybox via goole play store and screw everything up. That said, we are not touching /system at the moment because we lack the knowledge of that the nook is doing during boot process. I have been able to get asomething like AdAway to work which actually creating a sym link from /system/etc/hosts to /data/data/hosts file. I been doing this under the assumption that mounting and sym link are ok in the /system. But I would be worried too if there is a lot of those.
Click to expand...
Click to collapse
Lost and Confused
I tried following the instructions on the B&N’s website, but I do not see ‘Android Composite ADB Interface’ or even ‘Android Phone’ within the Device Manager of Windows. I now have ‘BNTV600’ and ‘NOOK’ under Device Manager/Portable Devices. I think this is for the big leagues and I may mess something up. Probably going to wait until there is a YouTube video guide showing step by step on how to successfully root the Nook HD+.
Many thanks to ‘leapinlar’ for the help.
cybersonic_ca said:
I tried following the instructions on the B&N’s website, but I do not see ‘Android Composite ADB Interface’ or even ‘Android Phone’ within the Device Manager of Windows. I now have ‘BNTV600’ and ‘NOOK’ under Device Manager/Portable Devices. I think this is for the big leagues and I may mess something up. Probably going to wait until there is a YouTube video guide showing step by step on how to successfully root the Nook HD+.
Many thanks to ‘leapinlar’ for the help.
Click to expand...
Click to collapse
If you read my description above, it says to update the driver for BNTV600.
No longer able to access internal & external memory on the Nook
leapinlar said:
If you read my description above, it says to update the driver for BNTV600.
Click to expand...
Click to collapse
This is what I did:
1. Plugged my Nook HD+ to my computer (ADB enabled)
2. Device Manager / BNTV600 / Update Driver Software / Browse my computer for driver software / Usb_driver_r04-windows folder / OK
3. Clicked on ‘Let me pick from a list of device drivers on my computer’
4. MTP USB Device appeared so I clicked on ‘Have Disk’
5. Browsed ‘android_winsub’ and clicked Open and OK
6. Android Composite ADB Interface appeared so I clicked ‘Next’
7. Message, ‘Windows can’t verify the publisher of this driver software’
8. Install this driver software anyway
9. Rebooted my computer
10. When the Nook is connected to the computer (ADB not enabled)
a. The Nook shows up as a G: drive and ‘MyNOOK Setup’ is the only file in it
b. Clicking on the ‘MyNOOK Setup’ brings me to a message:
• Welcome to MyNOOK Setup.
• MyNOOK Setup is a one-time installation that will allow you to tranfer your personal files to your NOOK.
• Transferable files include, but are not limited to: photos, music, videos, EPUB, PDF and Microsoft Office files.
• Note: Copyright protected files are not transferable
• To install, go to .... can't post link since im a noob
• For more information, visit ..... can't post link since im a noob
c. MyNOOKSetup.dmg appears when I click on the first link
11. When the Nook is connected to the computer (ADB enabled)
a. AutoPlay ‘BNTV600’ constantly appears.
12. I cannot access the internal or external memory on the Nook for both #10 & #11,
13. Running ‘makeroot.bat’ in the cmd for both #10 & #11 does not work either.
14. Device Manager / NOOK (BNTV600 no longer exist)
Follow my instructions to install the drivers and use my driver file from my first post. Go to device manager and delete any those three drivers you installed earlier, composite, mtp, etc. Then just do the bntv600.
Sent from my Nook HD+ using Tapatalk
Cool but....
...I am having a slight problem. I can not download your attached file usb_driver_r04-windows-Modded-for-HD.zip :/ everytime I do my computer which is running windows xp is telling me there is nothing there. Can you please help me thank you
Possible driver conflict with Samsung Galaxy Tab 7 Plus
leapinlar said:
Follow my instructions to install the drivers and use my driver file from my first post. Go to device manager and delete any those three drivers you installed earlier, composite, mtp, etc. Then just do the bntv600.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
• NOOK (G Drive appears in My Computer
When ADB is enabled
• NO NOOK (G Drive in My Computer
• BNTV600 AutoPlay windows constantly pops up
I forgot to say that I have a Samsung Galaxy Tab 7 Plus installed in this computer. The following items are what I see in Device Manager:
• Portable Devices / NOOK
• SAMSUNG Android Phone / Android Composite ADB Interface
I tried deleting all the drivers and repeat your instructions but the SAMSUNG Android Phone / Android Composite ADB Interface keeps appearing.
Dopey32 said:
...I am having a slight problem. I can not download your attached file usb_driver_r04-windows-Modded-for-HD.zip :/ everytime I do my computer which is running windows xp is telling me there is nothing there. Can you please help me thank you
Click to expand...
Click to collapse
I don't know what to tell you. I just tried again with windows XP and it downloaded fine. Just keep trying. And watch where windows puts it.
cybersonic_ca said:
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
•NOOK (G Drive appears in My Computer
When ADB is enabled
•NO NOOK (G Drive in My Computer
•BNTV600 AutoPlay windows constantly pops up
Click to expand...
Click to collapse
I experienced a lot of the same symptoms.
The Nook G: is for Mac users that do not have MTP. It is so they can get the drivers they need. Notice the .dmsg (sp ?) is for them. That will only go away when you get MTP working or switch to enabled adb.
I was most concerned with getting the adb interface working, so I just ignored the MTP issues until later. In fact I temporarily disabled it so it would not keep popping up during adb.
After I got everything sideloaded and rooted, I tackled the MTP issue. With adb unchecked, I went to USB devices and uninstalled the USB mass storage device (which was the Nook G). Then it recognized MTP.
Sent from my Nook HD+ using Tapatalk
I think it's safe to say that what we(me and other who got all the stuff out seperately) did so far aren't anything very dangerous. We havn't touch any other partition or boot loader. Unless you mess them up yourself since now you have root, then the worst it could happen is a full factory reset or you can force yourself to factory reset it.
okay got a little farther
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
All these tips also help with the HD. Thanks so much!
Sent from my Nook HD using xda premium
Dopey32 said:
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
Click to expand...
Click to collapse
Then you have either not installed the Android SDK (Software Development Kit) on your PC (which includes adb) per the B&N instructions or your path variable is not set to include where you installed it.
Sent from my Nook HD+ using Tapatalk
Dopey32 said:
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
Click to expand...
Click to collapse
if you can't follow or understand the instructions about adding the path to adb in the environment path you can always just cd "/to the directory adb is installed/" and run adb directly from there. easy way is to just drag the folder into the command prompt window. it'll save a bit of typing - only works if you're not running cmd as admin.
You said you modded the drivers from B&N? What did you change? Just curious...
So, instead of making another thread, since this is a tips thread, I'll just post it here.
Just in case you are not familiar with a factory reset on the Nook HD+, there are two kind of factory resets. The one that you perform yourself, which is actually not a full factory reset and the one that Nook get pissed and do the full one.
A factory reset that you perform yourself, whether from the GUI or button combination will basically clean the partition /data while a full blown one will basically restore other partition such as /system.
Why do I bring this up, because as we know, we are not perfect. I make mistake and so do other. Sometime instead of trying to re-trace the step and fix our mistake, it's easier to just reset everything. Well, since we can't just do a full blown factory reset our self, at least not very easy, we can at least force the Nook to do it for us.
So, if you felt like I did something wrong, and I don't know which step to take next, I make a little tool for you to start over. You can see the attachment, reset.zip in there, there are 3 files. You only have to run reset.bat if you need a linux version, maybe you can beg the OP to do it for you. If you exam the package, you can see that this is very similar to the original root method which force itself to factory reset, so this is basically a modified version of that. Obviously you still required ADB. Well, on the other hand, if you never get ADB working in the first place, you probably can't mess up that bad that you need this tool in the first place.
Let me make it clear, this tool WILL RESET EVERYTHING. It also REBOOT MANY TIMES. And expect the whole process to take about 10 minutes.
dbh369 said:
You said you modded the drivers from B&N? What did you change? Just curious...
Click to expand...
Click to collapse
I actually modified a generic driver by putting the Nook HD+ device id in it. I was not able to download the B&N driver so I don't know if it needed modifying or not.
Sent from my Nook HD+ using Tapatalk
cybersonic_ca said:
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
• NOOK (G Drive appears in My Computer
When ADB is enabled
• NO NOOK (G Drive in My Computer
• BNTV600 AutoPlay windows constantly pops up
I forgot to say that I have a Samsung Galaxy Tab 7 Plus installed in this computer. The following items are what I see in Device Manager:
• Portable Devices / NOOK
• SAMSUNG Android Phone / Android Composite ADB Interface
I tried deleting all the drivers and repeat your instructions but the SAMSUNG Android Phone / Android Composite ADB Interface keeps appearing.
Click to expand...
Click to collapse
I am having the same problem as Cybersonc_ca. I did everything according to the nook developer website and when I enable ADB on my nook hd+, it does not show my BNTV600 under portable devices but I DO have Android Phone >> Android Composite ADB Interface.
If I go to command prompt, how can I make it so that it checks that folder as well?
I apologize for such noob questions. Thank you.
sayw0rd said:
I am having the same problem as Cybersonc_ca. I did everything according to the nook developer website and when I enable ADB on my nook hd+, it does not show my BNTV600 under portable devices but I DO have Android Phone >> Android Composite ADB Interface.
If I go to command prompt, how can I make it so that it checks that folder as well?
I apologize for such noob questions. Thank you.
Click to expand...
Click to collapse
Go to command prompt and type 'adb devices' and see if you have any. And the looking for bntv600 was for getting the composite to show. You have that.
Sent from my Nook HD+ using Tapatalk
ADB Master helps you manage and monitor multiple Android devices using ADB (Android debug bridge). One click to switch adb to wireless, perform actions, commands or view and compare installed apps, running processes with cpu usage or browse logcat data for multiple selected devices… At the same time. Without root!
Updated November 2015
Download ADB Master 1.61 for Windows, Mac or Linux.
Quick start
1) Make sure ADB is installed on the PC
- http://developer.android.com/sdk/
OR
- http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/
OR
- http://www.xda-developers.com/andro...ng-fast-adb-fastboot-and-driver-installation/
2) Install and run ADB Master for your operating system.
3) Set the ADB location in the “Control” tab of ADB Master by browsing to the folder containing the “adb” binary. The background will turn green when the correct folder is selected.
Notes:
- For an Android device to appear in the list, enable "Settings > Developer > USB Debugging" on the device and connect it to the computer with a USB cable.
- In ADB Master, select one or more devices from the list of USB or WiFi connected devices to perform actions or view information on them...
Windows Users: You will need to install the Android ADB drivers if your device is not detected.
Automatic updates under Windows: If you get an error updating an older version using the built in update feature, try running the app as an administrator (right click and select "Run as administrator"). You only need to do this to update the app - not every time you run it.
Mac users: If you get an error that the app is corrupt or cannot be opened, try right clicking it and select open to allow it to run (you only need to do this once).
Linux users: The new 1.5 linux version includes a run script and has some special permission set as follows:
(Thanks to Craig D) if you want to run ADB-Master via its icon, the .jar permissions need to be set to 'executable'... This can be done by opening a Linux terminal and typing: chmod +x ADB-Master.jar.
Without setting the permission to +x you can only run it from terminal by typing: java -jar ADB-Master.jar.
If you like the app and want to support it, please purchase the paid version in the Google Play Store (search for 'ADB Master').
Using the ADB Master GUI
Device lists
View attachment 2670819 At the top of the application are the device lists. These lists provide a way to list and select devices to work with.
There are two lists:
1) USB connected devices with a button to switch the selected devices to WiFi (tcpip) mode. This will install “Helper.apk” to display adb state on the device and enable the device to be discovered and connected to by ADB Master.
NOTE: The device(s) and the computer must connected to the same WiFi access point for a successful ADB-Over-WiFi connection.
NOTE: Unfortunately, some android builds do not have the ability to use ADB-Over-WiFi without root.
2) WiFi connected devices which has a button to switch the selected devices to USB mode. This will uninstall “Helper.apk” and set the device back to USB mode.
Control tab
View attachment 2670799 This section allows you to perform actions or commands on all selected devices.
- Shutdown, reboot, reboot to recovery or reboot to bootloader by selecting the devices and then pressing the desired button.
- Press power, back, home or volume up and down buttons on all selected devices at the same time.
- “Identify” a device installs and runs a small utility to wake the device and display the same information that appears in the device list as well as the IP address.
- Execute any custom ADB command in the ADB Command box and hit enter or press “Execute” to run that command on all selected devices. NOTE: This function treats spaces as command separators so it may not work for all possible adb commands at the moment. View the results of the command in the “ADB Log” tab.
Applications tab
View attachment 2670866 This section allows you to compare and manage applications (packages) on all selected devices using the adb commands “adb pm list packages -e”, “adb pm list packages -d” or “adb pm list packages”.
- Install an APK from your pc
- Enable (requires root and su to be installed on the device)
- Disable (requires root and su to be installed on the device)
- Uninstall multiple apps on all selected devices with one click.
- Pull selected apk's
- Pull screenshots
- Start apps
- Force-stop apps (Only works with Android 3 and above)
- Clear app data and cache
App listing color key:
- Green: The app is installed and enabled on all selected devices
- Black: The app is installed and enabled on some selected devices
- Orange: The app is installed on some or all devices, but is disabled on one or more
- Red: The app is installed on some or all devices but is disabled on all installed instances
Processes tab
View attachment 2670801 This section uses the command “adb shell top -m 20” to list the top 20 processes running on the device. It lists all selected devices in one view making it easy to monitor multiple devices at the same time. Future features include the ability to terminate processes and use custom top commands.
Logcat tab
View attachment 2670802 View live Logcat data from all selected devices in one list making it easy to monitor multiple devices at the same time. Future features will enhance this section with the use of filters and colors.
- View and save Logcat messages to files
ADB Log tab
View attachment 2670803 View a log of commands executed by ADB Master. It logs the device, commands and their responses.
V1.1-BETA Changes:
- Fix for incorrect process display in Windows
- Removed the extra blank lines in logs on Windows
- Fix for device name not set correctly in Windows
V1.2-BETA Changes:
- Added tcp reset/disconnect button
V1.32 Changes:
- Added adb sideload feature (useful for ROM developers)
V1.33 Changes:
- Renamed Log tab 'Console'
- Moved ADB custom command fields from Command to Console tab for better context and visibility of command responses
V1.41 Changes:
- Added ability to pull selected apk's
- Added ability to save Logcat messages to files
- Added ability to pull screenshots
- Added ability to start apps
- Added ability too force-stop apps (Only works with Android 3 and above)
- Added ability to clear app data and cache
- Added time stamp to Logcat messages
- Fixed connect command to include the port for some versions of ADB
V1.51 Changes:
- Fixed some delays on the UI when connecting to a device
- Added buttons to open pulled screenshots and apk file locations
- Added installer for Windows users
- Added Mac .app package
- Added Linux version with required permissions set and a run script
V1.60 Changes:
- Added drag and drop to install applications (drag APK's to the application list on the applications tab)
- Added ability to select and execute a file containing ADB commands or drag and drop adb command files onto the console tab
- Added ADB Master automatic updates. Get notified when an update is available then download and install it.
- Added some useful buttons in the control tab that open various control panel items on all selected devices (all buttons may not work on all Android platforms).
V1.61 Changes:
- Improved handling of multiple commands in a single line to allow complex scripts to execute successfully.
- Fix for the way commands are handled in Windows related to line feed characters.
Execute adb commands from a file:
Command file(s) must contain valid ADB commands, one per line and may also contain comments. The starting keyword "adb" is assumed for each line and is optional in the file.
To comment a line, start the line with any of the following (common) comment delimiters: ";" "//" or "rem" as well as ":".
When selecting file(s) using the browse button, you will be prompted with a message containing the commands to be executed before they are executed. Drag and drop command file(s) onto the console tab to execute them without a prompt.
WARNING: ADB Master exposes powerful and advanced tools for working with your Android devices and misusing it can result in the device malfunctioning... REALLY.
Disclaimer: Although great care has gone into creating it, this software is provided AS-IS and you use it completely at your own risk. All rights reserved.
Download ADB Master 1.61 for Windows, Mac or Linux.
The above download links provide the recommended latest versions. Previous versions of ADB Master are also available below.
Note on automatic updates under Windows: If you get an error updating an older version using the built in update feature, try running the app as an administrator (right click and select "Run as administrator"). You only need to do this to update the app - not every time you run it.
XDA:DevDB Information
[APP] [TOOL] [Win | Mac | Linux] ADB Master: A multi-android ADB graphical interface, Tool/Utility for the Android General
Contributors
extremewing
Version Information
Status: Stable
Created 2015-03-07
Last Updated 2015-03-22
Seems Good...! (Y)
I saw a device today that was not completing loading of the apps list and a few other strange things including strange numbers for the processes cpu percentages. I will be looking into this a bit more so you can expect an update soon.
Today, I uploaded a new version that fixes some issues under Windows.
Please see the original post for the download link!
Thanks
Adrian
A new version is in the OP.
It includes a new "Reset" button for tcp connections that have stopped working, particularly useful when waking the PC or changing access points and the old connection is no longer working.
New feature in V1.3: ADB Sideload
I had a request to add ADB "sideload" capabilities to the app (useful for rom developers) and here is the first version to test out that includes this feature. I will update the OP soon if no one has any problems.
V1.31 Increased timeout for sideload
This version has an increased timeout for the adb sideload feature. It is possible the execute thread was not waiting long enough for the upload to complete?
good work, thanks
it's hard to remember the command for me,
V1.32 is now available from the first post
New feature: adb sideload - upload and install updates to a device in one step.
Sideload mode is a special option in the Android's recovery. It was introduced in Jelly Bean (4.1) and higher.
Please see your recovery's instructions on starting sideload mode.
Some small changes in V1.33 on first post.
After some positive feedback, I have published this new 1.33 version on the play store too.
This is a wish list of features to add to ADB Master and I will be working on implementing them.
- Add ability to pull selected apk's from the selected devices
- Add ability to save logcat messages to files
- Add ability to pull screenshots
If you have any other requests, please post here!
Hi, a suggestion: can you make possible to connect to a device with a known ip? I don't want to install those apks...
vipervault said:
Hi, a suggestion: can you make possible to connect to a device with a known ip? I don't want to install those apks...
Click to expand...
Click to collapse
Ok let me figure out what would make sense in how to do that.
Just out of interest, why do you not want to install the apk's (I assume you mean helper.apk)?
vipervault said:
Hi, a suggestion: can you make possible to connect to a device with a known ip? I don't want to install those apks...
Click to expand...
Click to collapse
Just so you know, executing the connect command at a command prompt when you know the IP is quite easy too. The command would be "adb connect <IP>". The good thing with the helper.apk with ADB Master is that it will take care of this for you and even re-connect when a connection is broken for some reason.
Anyway, still waiting to see why you do not want to install the apk's? You could uninstall them straight away from the Applications tab too.
.jar won't open
I double-click on the jar, but nothing happens. Anyone know why this could happen?
Aidoboy said:
I double-click on the jar, but nothing happens. Anyone know why this could happen?
Click to expand...
Click to collapse
You need to have Java installed and then the file type ".jar" should be associated with the java runtime correctly.
Best tool ever!
Vingadero said:
Best tool ever!
Click to expand...
Click to collapse
Thank you! Your feedback makes it worthwhile.
If you have any suggestions or special requests, please feel free to post them.
extremewing said:
This is a wish list of features to add to ADB Master and I will be working on implementing them.
- Add ability to pull selected apk's from the selected devices
- Add ability to save logcat messages to files
- Add ability to pull screenshots
If you have any other requests, please post here!
Click to expand...
Click to collapse
Great tools! Any progres with
- Add ability to pull selected apk's from the selected devices
???
Hi,
Beep'nGo is not supported anymore.
But it's not clear what app could be used instead which would be compatible with preinstalled Beaming Service for Samsung.
Samsung Pay is not available World Wide. App even can't run if installed from apk.
What about other popular Loyalty Card apps? Which apps use Beaming Service?
Thanks.
Beep'nGo still working
I think Beep'nGo was the best loyalty card app. I have a Galaxy Note 3 and even though the app was discontinued earlier this year it still works on my Note 3. I can still add cards locally to the app and the beaming still works. I have been trying to figure out the file structure so that I can preserve the functionality in case something happens to the phone. I have searched the folders and I can't find a mobeam, beepngo or derivative naming file structure. So the question is how does it work. Where are the install files. Any ideas?
the app is still working ,sort of.
if its already installed, it works fine.
But ive just got a Note 8 & unable to use the app so far. Im gutted & I love this app. It works great all the time o my other devices.
I just cant log in at since installing the app.
I get an error 'you are not connected to the internet'. Ive tried all sorts with no luck.
I also tried to find the data file for the app, I found the file for it named COM.MOBEAM.BEEPNGO, then theres a sub folder named CACHE, but thats empy!
Im at a loss how to log in and get this app working on my new phone. Its frustrating as its perfectly fine on my S7 Edge, but I need to give that phone to my partner soon.
someone here must know something on this surely?
Im not in USA so cant use samsung pay or those affiliated apps
pinkbellbird, you can't logon becuse app is discontinued. Nowere to logon. No coud backup.
You can use it by adding new cards every time you reset to factory. Otherwise it's working.
I have Samsung Galaxy Note 3 and love that app, using it all the time. Also I use Titanium Backup for it and restore data every time I play with roms or reset to defaults.
Would like to know if there is alternative for this app that use beaming though.
Samsung Pay is the only other app that I have read of that includes the beaming tech.
As I do not have a Samsung at present, I would be quite interested to know if something is available for phones, at large, that incorporates the beaming tech.
If there was a way to make Samsung Pay work in my country.
Sent from my SM-N910C using Tapatalk
Beep n go on S8
I had the same trouble with my new S8. Just install the app sending it via Bluetooth from old to new phone and then scan the cards directly with new phone from old phone as it was physical card. Then installing widget on new phone you will bypass the logon error.
Still no one found a way to export the cards stored into discontinued Beep n' Go app so they can EASILY be imported into other apps like... Samsung Pay?
We find ourselves in the same position as you. The way I managed to solve the problem, now that I am one step away from making the change to a note 8 (from a note 3), it is to make a copy of the system and user data with the Note root and using the Titanium Backup, and the new phone will reload the Beep'N'Go program. With total reinstallations of Note 3 it has worked, I hope it also does note 8!
Steps to migrate BeepnGo including data from old to new phone
install ADB ( developer.android.com/studio/command-line/adb ) on your PC
Open cmd window in the folder where ADB is located
on old phone: enable USB debug option in developer options
connect old phone to PC ( watch for question popups on phone and answer them)
check if phone is visible to adb : adb devices
commands:
adb backup -apk com.mobeam.beepngo ( watch for question popups on phone and answer them, if your phone is encrypted it will ask for a password (use simple password like the letter 'a' . This command will create a file backup.ab in the current folder)
[the previous command should have backed up the apk as well. However on my phone this did not work so we need some more steps to copy the apk too:]
adb shell
pm list packages -f | grep mobeam
will show the path where the application is stored (in my case:
package:/data/app/com.mobeam.beepngo-2/base.apk=com.mobeam.beepngo )
copy the apk to a folder which is visible on PC:
cp /data/app/com.mobeam.beepngo-2/base.apk /storage/self.primary/Download/beepngo.apk
exit
(you are back at the normal cmd window prompt, don't close the window yet)
Now on PC open windows explorere, navigate to your phone devices Download folder and copy beepngo.apk to a folder on PC
Disconnect old phone
on new phone: enable USB debug option in developer options
Connect new phone (watch for question popups on phone and answer them)
Copy beepngo.apk to the Downloads folder of the new phone
On phone use file manager, navigate to Downloads folder and run the beepngo.apk to install beepngo
On PC go to the command window:
check if new phone is visible to adb : adb devices
adb restore backup.ab (this will restore the beepngo files, watch for popups on your phone and answer quesitons. if you had to enter a password for encryption, please enter the same password again )
Start beepngo and the data from previous phone is visible
:laugh: :victory: :laugh: :victory: :laugh: :victory:
OH MY GOD!!! IT WORKS!!!!!
so I will not have to root the new note 8! Thank you very much! Really !!!!
:laugh: :victory: :laugh: :victory: :laugh: :victory:
MisterKosmos said:
install ADB ( developer.android.com/studio/command-line/adb ) on your PC
Open cmd window in the folder where ADB is located
on old phone: enable USB debug option in developer options
connect old phone to PC ( watch for question popups on phone and answer them)
check if phone is visible to adb : adb devices
commands:
adb backup -apk com.mobeam.beepngo ( watch for question popups on phone and answer them, if your phone is encrypted it will ask for a password (use simple password like the letter 'a' . This command will create a file backup.ab in the current folder)
[the previous command should have backed up the apk as well. However on my phone this did not work so we need some more steps to copy the apk too:]
adb shell
pm list packages -f | grep mobeam
will show the path where the application is stored (in my case:
package:/data/app/com.mobeam.beepngo-2/base.apk=com.mobeam.beepngo )
copy the apk to a folder which is visible on PC:
cp /data/app/com.mobeam.beepngo-2/base.apk /storage/self.primary/Download/beepngo.apk
exit
(you are back at the normal cmd window prompt, don't close the window yet)
Now on PC open windows explorere, navigate to your phone devices Download folder and copy beepngo.apk to a folder on PC
Disconnect old phone
on new phone: enable USB debug option in developer options
Connect new phone (watch for question popups on phone and answer them)
Copy beepngo.apk to the Downloads folder of the new phone
On phone use file manager, navigate to Downloads folder and run the beepngo.apk to install beepngo
On PC go to the command window:
check if new phone is visible to adb : adb devices
adb restore backup.ab (this will restore the beepngo files, watch for popups on your phone and answer quesitons. if you had to enter a password for encryption, please enter the same password again )
Start beepngo and the data from previous phone is visible
Click to expand...
Click to collapse
My backup.ab has 0 Kbytes. Any ideas?
rexator said:
My backup.ab has 0 Kbytes. Any ideas?
Click to expand...
Click to collapse
Are you sure that you have the latest version of MoBeam? I tested it on the latest version.
What does these command give as output?
adb shell
pm list packages -f | grep mobeam
Thank you MisterKosmos! Great help, works perfect. Looked complicated at first, but was really easy thanks to your great tutorial. 5 min work to get beep n go from my S8 to S9.
Do you think it would be possible to export the database to another format so to import into let's say Samsung Pay?