Hey guys
I have a t mobile G1 rooted with Danger SPL and (Just Recently Flashed) Amon Ra 1.7.0 Recovery image.
All my troubles started after I saw that Super Froyo had a new bulid of 4.4, so I wiped my system, cache, sd-card, data (But not my boot) with my old Clockwork Mod 2.5.2. Everything went fine and dandy and the new bulid ran nicely, but as I reread over the directions for Super Froyo 4.4 i found that partitioning your SD card would increase speeds on this particular build. So I flashed Amon-Ra's recovery and then I partitioned my SD card to 512MB EXT3 / LinuxSWAP 64MB... After this I encountered alot of FC's.... So i flashed back over to CM6 Stable after partitioning again and now... Im stuck in countless bootloops.
Ive only had a somewhat-firm grasp on rom's so far, but i think my G1 is not technically bricked if i can access the recovery image full menu.
I need help ASAP.
Thanks.
you don't deserve being helped by being lazy and not wanting to read all the faqs and searching through youtube videos for information.
Oh i forgot you posted in the wrong forum too.
Its already been fixed. My bad. Just a simple wipe did the trick
Related
Is what clockwork recovery tells me. Last night flashed fresh Rom without a hitch. Today I run a nand backup before flashing a new kernel, nand worked find (besides at the end it said can't find sd - ext) but now I can't wipe or flash anything. Any ideas? Just states the title.
Sent from the Evo
mbaseball3 said:
Is what clockwork recovery tells me. Last night flashed fresh Rom without a hitch. Today I run a nand backup before flashing a new kernel, nand worked find (besides at the end it said can't find sd - ext) but now I can't wipe or flash anything. Any ideas? Just states the title.
Sent from the Evo
Click to expand...
Click to collapse
this is why you dont work clockwork.
now flash your phone with Amon Ra and be a happy Root user!
Try clearing your cache, mine was giving me grief too until I did that. Then I switched to Amon's.
Dont know if this is the correct forum to post but here it goes,
phone has MAGLDR 1.11
clockwork 1.1
originally flashed jdms 1.6 nand and was working perfectly
i tried to add the files from the updated clockwork 1.2 booted up clockwork as it normaly would, backed up my current system through through clockwork, i downloaded and put the updated version of jdms 1.7 beta and it would just bootloop, read that i needed a partition and i did it through clockwork, still bootlooped but it woped my sd card's contents with the partition, tried reformatting sd card added a new rom to start from scratch and it just satys at the htc logo or the android on rollerskates logo, tried putting the recovery image had back and it said it couldnt recognize md5 sum so it wouldnt do it. ive tried three bulds and all of them get stuck at the htc or cyanogen screen, i am doing all this from ubuntu, do i need to just start over and reflash through DAF? i dont have access to a windows machine so it will be a while, anybody have any suggestions? im phoneless at the moment, thanks in advance
Wipe cache after restore.
When bootloop, restart phone, start Clockwork mode - wipe cache.
Then restart phone.
Sent from my HD2 running Gingerbread
Tried that, didn't work still stuck on HTC quietly brilliant screen just flashed raidroid HD build
anyone has any advice?
Same Issue
I have the same issue of a bootloop... this seems to be the only place i could find with someone who is having a similar issue as i am.
Steps ive done:
Used Task29 w/radio 2.08.50.05 first.
Ive installed HSPL3
Ive also installed MAGLDR 1.13
Ive partitioned the SD to 13 gb FAT32 and 1 GB Ext3 --- both in primary
Ive flashed recovery 400
installed recovery files onto sd directly
I added the zipped CMYLXGOroms.stock.desire.HD.v1.1.5n.NAND.RMNET.NO-SQUASH-RAFPIGNA.1.7OC_CWM file directly to the SD card root.
then I install the CMYLXGOrom and it installs correctly, and then it boots up, and i see the android welcome screen for a second, and it starts its bootloop.
I've tried this with several differnt roms that are for the 1024 LEO but I get the same result each time.
Any help would be much appriciated!
Hi
Okay i am pretty much a complete noob at all of this.. so give us a fair chance.
Ive just attempted to install nFinityGB v0.6 on my HTC Tattoo - and failed, quite miserably.
I've followed the following tutorials:
Goldcard - http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
Rooting - http://theunlockr.com/2010/03/16/how-to-root-the-htc-tattoo/
Loading a rom - http://theunlockr.com/2010/03/30/how-to-load-a-custom-rom-on-the-htc-tattoo/
I downloaded, and moved the zip file across onto the SD card.
Turned off, Booted Recovery - made a back-up, wiped, reset and then installed flash.
Reboot > stuck on Tattoo screen.
Have tried re-install - no joy.
On the ROM's page it talks about a ClockworkMod - which i have no clue on, because the tutorial given; makes no sense to me; a noob.
(http://forum.xda-developers.com/showthread.php?t=892401)
Someone please help, im backing using my old Sony Ericsson C305...
You probably need to format system partition after doing wipe, and before flashing rom. Formatting system partition is not an option in AmonRa afaik, so you would need to install ClockworkMod.
http://forum.xda-developers.com/showpost.php?p=9192029&postcount=21
Once you have ClockworkMod installed, make a backup with it before flashing new rom, as I don't think backups from AmonRa can be used with it.
ok well ill try that
still got problems :/
ive installed ClockworkMod - latest one.
Wiped user data
Wiped partition data
Install .zip
Reboot
Once again hung on Tattoo screen.
Any ideas?
Mounts and storage -> format system?
First boot takes 3-4 minutes.
I messed up my phone, erased everything on the sd card and at this point can only get into clockwork mod recovery. Try to flash a zip and says it is successful, then ends up back at clockworkmod recovery again. I am lost
trout14 said:
I messed up my phone, erased everything on the sd card and at this point can only get into clockwork mod recovery. Try to flash a zip and says it is successful, then ends up back at clockworkmod recovery again. I am lost
Click to expand...
Click to collapse
Did you select partition SD card? If you did and didn't copy the contents to your PC then you are out of luck. I don't know whether there are tools that can recover from erased SD card. And which ROM you tried to flash? ICS or Gingerbread?
I was trying to flash ICS, and it said it was successful, but the same loop process back to clockwork mod. Messed with stuff I didnt know about and erased the entire sd card. Have been able to successfully flash CM, and in the process of reinstalling apps, then will back it all up again, and try to flash ics again. Wow, thought I was screwed there for while.
any tips for flashing ics, cause obviously i failed.
trout14 said:
I was trying to flash ICS, and it said it was successful, but the same loop process back to clockwork mod. Messed with stuff I didnt know about and erased the entire sd card. Have been able to successfully flash CM, and in the process of reinstalling apps, then will back it all up again, and try to flash ics again. Wow, thought I was screwed there for while.
any tips for flashing ics, cause obviously i failed.
Click to expand...
Click to collapse
If you want to flash ICS ROM, you will need HBOOT blackrose and resize the partition. In addition, you will have to reformat your SD card to create a ext4 partition. You can't flash ICS ROM on stock partition. Just do some additional research and you will have Ice Cream Sandwich
Got it to work. Thanks for the help. I was scared for a while there that everything was lost.
I installed medroid. I see that you have medroid and texasice ICS. Can you have 2 roms on a phone?
trout14 said:
Got it to work. Thanks for the help. I was scared for a while there that everything was lost.
I installed medroid. I see that you have medroid and texasice ICS. Can you have 2 roms on a phone?
Click to expand...
Click to collapse
I have 2 ROMs on my SD card but not 2 ROMs on the phone The Medroid v6.1 that I am using does have Texasice's work included that's why I listed Medroid and Texasice.
Blackrose and ICS are tough to get right without exact preparation. As taodan said, I would study the threads on Blackrose and ICS. I usually read the whole thread unless it has hundreds of pages. And, sometimes I still don't get it. These aren't that extensive yet. I don't know about cwm but amon_ra prompts you before you can do anything asking if you want to proceed. Cwm, when I used it didn't do that. One reason I changed.
If you get to the point where you can try Amon_Ra 2.2.1, I would give it a shot. Has been 100% bullet proof for me.
Also, I personally feel it is important to wipe System also as part of the wipe process.
Enjoy the roms--
already solved.. hehe
Hey guys, really struggling trying to get this working and I'm not sure why. I've been flashing roms to my HTC HD2 (1024 LEO - TMo USA) for a few years now without any issues. For some reason I can not get either of these CM builds to boot properly at all.
- [ROM][720p] NexusHD2-ICS-4.0.4-CM9-HWA V2.8 [NativeSD]
Boots to the grey-ish android text splash logo and cycles through the animation for 1h+. No signs of continued activity.
- [ROM][720p] NexusHD2-JellyBean-4.1.2-CM10 V1.3a [NativeSD]
Boots to green HTC splash text for 10 seconds then phone completely turns off and reboots repeatedly. Left going for 30 min, no change.
Both installers use the AROMA installer platform. Maybe I'm missing something here? It's been a while since I've tried anything new like the AROMA stuff. I just can't seem to get these to function properly. If there's anything at all I can try to do I would really appreciate the assistance.
I'd like to give 4ext a try, but I'm not sure how I can do that with replacing Clockwork in the process.
Here's my specs:
Environment:
-HTC HD2 (1024 LEO - TMo USA)
-16Gb SD HC Card [512MB Paritioned EXT4 / 32MB SWAP] (Attempted with standard 2Gb SD as well with same setup, same results.)
-HSPL 2.08
-MAGLDR 1.13
-CWM Recovery 5.0.2.7
Things to Note:
-Wipe data/factory reset, Wipe cache partition, Wipe Dalvik Cache, Fix Permissions all run before installations.
-Installations for both ROMS attempted with all 3 installation types (NAND, NAND with DataOnEXT, NativeSD). Exact same resulting errors as listed above, regardless of installation method chosen.
-ROM's zips installed via CWM Recovery's 'Install from SD Card' utility.
-SD Card formated after failed install attempts.
-MD5 verified. No visible file corruptions.
Click to expand...
Click to collapse
This seems quite odd, I assume you've tested other ROMs which boot perfectly? It's possible that your SD simply isn't compatible with MAGLDR (mine isn't) so NativeSD doesn't work. As for NAND/Data on EXT do you correctly repartition in CWM as per the OP of the ROM threads before flashing?
Nigeldg said:
This seems quite odd, I assume you've tested other ROMs which boot perfectly? It's possible that your SD simply isn't compatible with MAGLDR (mine isn't) so NativeSD doesn't work. As for NAND/Data on EXT do you correctly repartition in CWM as per the OP of the ROM threads before flashing?
Click to expand...
Click to collapse
All other ROMs I installed worked fine. SD card has worked fine as well for other builds. After some research I found that doing an SD format/partition via CWM Recovery defaults to EXT3 with no options for EXT4 apparently.
I was able to fix the issue late last night however. I flashed 4ext recovery via CWM and used that to convert the SD card's EXT3 system partition into EXT4. Ran the CM10 install and everything came up perfectly. I still think that's strange though considering I chose a pure NAND install.
warpedcell said:
All other ROMs I installed worked fine. SD card has worked fine as well for other builds. After some research I found that doing an SD format/partition via CWM Recovery defaults to EXT3 with no options for EXT4 apparently.
I was able to fix the issue late last night however. I flashed 4ext recovery via CWM and used that to convert the SD card's EXT3 system partition into EXT4. Ran the CM10 install and everything came up perfectly. I still think that's strange though considering I chose a pure NAND install.
Click to expand...
Click to collapse
Oh darn it! I came a little too late to help you. When I first opened this thread, I told myself "damn, too much letters and words! will look at it later." when the issue is actually easily fixed. Sorry!
I was on NAND (cLK), but then I wanted to try nativesd. so I flashed about 3 nativesd roms, but non of them worked. I switched from cwm to 4EXT recovery and voilà, everything worked!
I had almost exactly the same set up, except the recovery. It is indeed weird why cwm doesn't work whereas 4ext does.
Marvlesz said:
Oh darn it! I came a little too late to help you. When I first opened this thread, I told myself "damn, too much letters and words! will look at it later." when the issue is actually easily fixed. Sorry!
I was on NAND (cLK), but then I wanted to try nativesd. so I flashed about 3 nativesd roms, but non of them worked. I switched from cwm to 4EXT recovery and voilà, everything worked!
I had almost exactly the same set up, except the recovery. It is indeed weird why cwm doesn't work whereas 4ext does.
Click to expand...
Click to collapse
No problem, I appreciate at least knowing I wasn't the only one to have issues with it! Maybe you can still help me out though.
The only way I am able to boot into 4EXT recovery is by installing a special zip file with CWM each boot; it would load a 1-time instance of 4EXT recovery. Is there some way to flat-out replace CWM with 4EXT? Until CWM has EXT4 formatting capabilities, I'm not seeing the advantage of it with these new ROMs being so dependent on it. Or maybe it's because of the AROMA installers, which I definitely see as being the new preferred standard for ROM installation packages.
NexusHD2-JellyBean-CM10_V1.3a and VJ CM10.1 | Jelly Bean 4.2.1
hi guys
help me ...
Sorry for my post here
i cant post in [DEV/ROM/4.2.1] [Jan 26 2013] VJ CM10.1 | Jelly Bean 4.2.1 - v4.6 for HD2's topic
wifi fixed for this rom ?
and on NexusHD2-JellyBean-CM10_V1.3a disabled lock screen animation!
can enable animation lock screen ?