Database Users

jumping to kernel

have a tmo us hd2
had a past version of android with sense it worked fine. tried a different and got the pause at jumping to kernel so tried a clean version, it worked. ive booted it plenty of times, then tonight it stopped working
so im trying froyostone with sense and now it wont boot either
im on omega v7 newest and radio 2.1.5.28_2

I was on the same problem, i think you have the android files directly on your SD Card? So that is the problem, put them in a new folder android.
That helps me, the first boot was by me also possible, but after that all reboots end in "jumping to kernel"

nope. theyre in the android folder.
and i just tried switching to the 2.12 radio
the strangest part is that is was working the past few days and earlier today...
id understand a certain build not working but why would it randomly stop working.

Have you made, since this problem more reboots. I have on my HD2 sometimes that i must boot 2-3 times to come up

yup, tried multiple reboots and both radios

have you solved a problem? I've similar problem. Each time I turn on the phone - I'm getting this error. Sometimes it helps to remove "cache' folder and some others and restart twice or may be 3 times. But no working 100% solution.

My Results
ppp vr.
Market ok
WIFI ok
BT ok
whitout freezes
little bit more sensitive touch screen
Very good job, DEV team you are masters

When I'm getting stuck at jump to kernel, I normally remove and reinsert the sd card when I booted into WM and most of the time that fixes it.

I (and other members) have found that "Jumping to kernel..." freeze occurs when one is using Windows for a period of time. The solution is usually to re-boot and once Windows loads *immediately* boot into Android. This has not failed me yet! Before I was like you, wondering why sometimes I get the freeze and other times I don't...but a fresh boot into Android solved my issue.
Hope this helps.

have you changed the kernal lately or switched any file , or renamed anything

have you tried changing the startup.txt file? look around for that solution..it has been posted here many times.
I would give you a link but I am posting from my cell so it would be a little difficult.
Sent from my HTC HD2 using XDA app on darkstone froyo sense v2

[RESOLVED for now] "Connection failed"

Ok, all of a sudden I can't connect to gprs, worked fine this morning then stopped. Not my network as my sim works in other phones. Not my apn settings because they were working before and I tried renewing them just in case anyways. Tried hard reset and no luck. Tried recovery to a backup I made last week no luck. Extremely frustrated! Running vision Desire Z stock rom, rooted then ota updated then rooted again, but worked perfect for 2 weeks...
...any idea how to diagnose?
Finding now sometimes it's sticking at 'turning on', only gives me the 'connection failed' 3 times then just says to check here to use mobile data. If I create a new apn it tries to connect again but no luck. The phone is seeing GPRS in settings-info but just can't connect. Any log files I could look at?
Downloading the full 1.72 rom now to see if that works (rather than going back to 1.34 then the OTA upgrade) but so strange that it worked fine for a couple weeks!
*** After flashing 1.34 data didn't work for about 6 hours, then started to work. I then flashed 1.72 in full (not ota) and it continued to work. I took a backup then restored to when it was working last before the issue and it would not work so restored back to the fresh 1.72 and it is still working. Anyways, seems its jsut me...
Sent from my HTC Vision using XDA App

edit: Ok now totally confused, installed 1.72 complete and still no data. Going back to 1.34 now to see what happens...
Ok, now I can't get the 1.72 to install, but that's a USB driver issue I assume...hope it works eventually!

Alright, officially even more confused. Is there a possible hardware error that can stop data from working? Back on 1.34 (still with S-off but not rooted yet) and data still doesn't work. Network swears nothing is wrong, but I just am pretty frustrated. Any kind of logging possible at all when data is trying to connect?

[Q]-Android Gingerbread NAND Constant Phone FC and Crash (Full of Details)-

I have been searching all over for answers, but have not found any solid solutions. There was another case similar to mine, HERE but I really don't think things are quite the same. I am new to flashing with HD2, but am very seasoned with the Samsung Vibrant.
I had the phone app crashing and robot voice for a while. I have done all of the supposed fixes but nothing has worked yet. I bought my HD2 second hand, (like the big screen and more RAM better than on my TMO vibrant), but when I got it it was in great condition, completely stock. So I wanted to put android on it because MinMo is (for my concerns) unusable. SO, here is what I have done.
Started with a TMO(US) HD2 Stock
-Flashed New Radio from 2.14.50.02 to 2.15.50.14
-Flashed HD2O WM 6.5 ROM (Phone Worked fine, but decided WinMo sucks)
-Flashed MagLDR
-Flashed CWM
-FLashed BOYPPC SHIFT PDA sense&HOneycomb (FAST!)
But then whenever I tried to make phone calls I get the robot voice and three seconds later, crash. (the process phone in com.android.phone is not responding...)
-The first fix I tried was HERE for the Low volume fix. No Dice...
-Then I Tried this Volume Fix HERE, but did not fix problem.
-I tried disabling the contact sync, seen in another thread, and still nothing.
-Went into Rom Manager, Flashed Clockwork recovery, then used it to "fix Permissions"
-During the permission fixing, I received a normal clear phone call with no FC.
-Then after call it said that it was done with permissions, and asked me to restart.
-After the reboot it would just constantly Force Close every five seconds, and it was not showing any network signal.
So Then I:
-Flashed a new Radio. -2.06.50.04 -TMO US
-Still Not working
-Went back to the MAGLDR and did an AD Hardreset, and tried flashing HYPERDROID.
-Still nothing.
-Reset again and Reflashed BOYPPC SHIFT, (liked it better, I know, a lot of flashes...)
-Now getting network signal, and able to get into the phone program, but as soon as I try to make a call, same problems occur with Robovoice and FC.
Sorry so thorough, but I always feel like more info is better than too little!
I had looked at another thread that said something about wearing out the radio from flashing, but on my vibrant I have flashed over 30 ROMs and 10 or more Kernals, and it still works good, so, I dunno. Kinda stuck.
Got my finger ready for the thanks button for ANY help offered.

Also noticed that now, no sounds are playing at all. Speaker driver error? It worked ok the first time I loaded this rom.

Just installed CMYLXGO's Desire Rom Yesterday and the phone works.
Now running CMY's gingersense streak, which is also a Sense ROM, and it works too. Is there any reason that anyone can think of as to why my phone will only work with sense themes?

i'm having a very similar issue.... i've tried a few roms and i get the same thing. calls go out for a few sec then force close. ppl tell me they can't call me sometimes because of this. i even task 29'd and reflashed everything. radio, magldr, cwm and now hyperdroids latest... still get force close and an unusable phone....
wtf

2.15.50.14
The above is the recommended radio that was a good start. Now the next thing to go under settings --> sound --> Feedback. I forget which one it is that causes the phone to crash/give robot voice but that is most likely what is causing the issue for you guys. I believe non sense builds also have these options if I recall correctly. I use sense builds myself. Also be sure to restart phone after you uncheck the settings under feedback. Phone should work after that and no robot voice.

I dont have robot voice and i'm running that radio. hyperdroid was running fine until recently and i have this problem. i can't get calls it causes the phone app to crash and sometimes calls crash a little bit in.... i've task 29'd and redone a clean install with old known working hyperdroid WITH NOTHING INSTALLED still does it, tried new hyperdroid; same thing...

antiparadigm said:
Just installed CMYLXGO's Desire Rom Yesterday and the phone works.
Now running CMY's gingersense streak, which is also a Sense ROM, and it works too. Is there any reason that anyone can think of as to why my phone will only work with sense themes?
Click to expand...
Click to collapse
you can try cyanogenmod and miui by starting over again but remember to do task29 to be sure that you dont leave any traces of previous installations !
!!
good luck and regards !! !

com.android.phone stopped working... ?

Hello XDA.
I'm using Cyanogenmod 7.0.3 for almost a month now, and I upgraded my radio to 7.13.35.05 to fix my GPS issues. The phone worked fine for a full month, until now. Suddenly I'm greeted with the message "com.android.phone has stopped working, please try again." every 5 seconds. The phone app itself works fine, but I seem to have no service. I have a shortcut to the page "Phone info" where I noticed something weird. The button "Turn off radio" has changed into "Turn on radio" and the network mode is "(unknown)". Rebooting didn't fix anything, neither did pulling the battery out and booting like that.
What could I do ? I'm considering a full factory reset but I'll need to back up my contacts and messages first... which is going to take a long while with the error popping up every 5 seconds !
Edit1: Flashing radio 7.08.35.21 right now... Maybe this fixes the issues
Edit2: Flashing the radio didn't help. Now I'm going to flash 7.0.3 over the current one, hoping it would fix something without losing my data... I do have a nandroid backup left, but it's very old...
Edit3: Is this forum dead or something ?
Edit4: Factory Reset did the trick. This topic can be closed.

[Q] No sound and occasional wifi

I wanted to upgrade my firmware for my i9505. It was rooted so I went back to a stock firmware I had used a month or so ago. Xxuamdm. It went perfectly fine and after rebooting I set about upgrading the software. The first upgrade was nearly 400mb. This downloaded and then installed OK. The next one was about 50mb and the same happened again. Then there was a third one - about 50mb again - except when my phone rebooted it got stuck on the loading screen. I tried to reboot several times but I couldn't get past the Samsung loading screen. Eventually I decided to reflash the stock I had before using Odin again but this time when I went to update the firmware I couldn't turn my WiFi on and also I noticed my sound had stopped working. This is for calls notifications music YouTube everything. I have then tried to update via kies and still I get the same problem. I went to Sammobile and downloaded the most up to date firmware for my device and still no sound or wifi. I then tried a Google ROM I had flashed previously and the WiFi was able to turn on again but still I have no sound. All I want is the latest stock firmware and if I can then root it afterwards that would be a bonus.
I have searched for answers but I can only find two threads - both of which have not offered a solution to my particular issue.
Thanks
Sorry if I have posted in the wrong area but does anyone have any ideas on this? I have managed to flash several different custom roms today - Foxhound, Google Edition, Echoe - each of these has working wifi however none of them have fixed the no sound issue. When I call my phone it I hear ringing from one end but my phone does not even show someone is calling for a good 30 seconds - and I cannot hear anything when I pick up. Once I hang up my phone still thinks I am on a call and wont disconnect for a good 30 seconds.
When I get home later I am going to try and flash the following stock firmwares using Odin:
I9505XXUDMH8_I9505OXXDMHA_BTU
I9505XXUBMGA_I9505OXXBMG3_BTU
Is this a good idea or am I wasting my time and need to do something else?
I desperately need someones help on this - my only other option is to get a new phone and I really cannot afford to do that.