[Q] T-mobile wing... camera upside down? - Wing, P4350 General

I just bought a used tmobile wing, reset to factory settings (both hard & soft resets), but my camera is still showing upside down. Also tried using a different program (cool camera), same result. Updated to windows 6.5 and a rom from this site, still have the same issue. Pictures are taken upside down, saved images are upside down. No matter which way I turn the phone, it rotates appropriate to the upside down position.... -.-
Any ideas?

Related

T-Mobile MDA/Wizard Malfunctioning?

Hello there, I am quite new to this forum, only being a lurker for quite some time. But I have decided to join because I am in dire need of help. My MDA/Wizard has suddenly gone out of control. I have had Mobile 6.1 installed on it for years with no problem, and the .cabs I have are working fine.
Now, recently, my phone has acted in a very unfavorable manner that has even caused me to hard reset it to it's original state, with still no luck. On about three different occasions, my phone's lights, keyboard and face, have gone off, and stay on until the phone locks. The main buttons, (Directional arrows, Exit, Call, Internet Explorer, and Mail) do not function unless I press a top right hand corner button on the keyboard twice. From there, it slightly functions. When I quickly press the power button and press it again, the phone will enter its mail area. Doing this again opens up internet explorer. Pressing the center button in the directional pad causes the screen adjustment function to suddenly appear. The keyboard can barely function.
I have no idea what's causing this, any help please?
try getting the newest hard spl and flashing a new rom. maybe your rom got corrupted

Something interfering with the camera

I have the stock AT&T Pure.
For some reason I can't figure out, the camera isn't working properly anymore. It starts up fine, the autofocus works, I can enter the Settings and the Advanced Settings menus and change settings without problem.
However, when I touch the shutter button to actually take the photo, the camera responds like it should, makes the shutter sound, and even displays the photo I just took on the screen. But that's where it freezes. The photo "review" never goes away. I've even tried changing the review duration to zero, but when I take a picture the screen just becomes white and freezes there. The "back" arrow button below the screen does not respond when this happens, nor does the Home button. But the "end call" button does take me to the home today screen. From there, if I go back to the camera tab and touch the icon to start the camera, nothing happens. The button responds visually when I touch it, but the camera does not start. Only a soft reset (or sometimes running CleanRAM at Level 3) will make the camera app start again, but still not completely take a photo. No photo is actually stored/saved when this happens.
I thought it might be due to lack of free memory, but even after a soft reset or running CleanRAM this still happens. I even tried reducing the resolution to see if that did anything, but it didn't.
I think it has to be one of the other apps I installed that's interfering with the camera. After a hard reset, the camera worked fine. Then after I installed my apps this started happening again. Nothing I can see in the registry settings for the camera look incorrect or out of the ordinary. Only one or two of my apps have functions that access the camera, and the same thing happens when I enter the picture mode in them. I removed both of them but still have the same experience.
Any ideas?
I'm afraid there is no other way:
- hard reset
- install your apps one by one, softresetting each time
- check the camera
- install another app
...
In the end you will know what's wrong.

[Q] hd2 hardware button light stuck on

so I just noticed the lights for my hardware buttons are stuck on, happens from the moment the phone turns on, and nothing changes it (though they seem to dim slightly) I've tried reflashing the phone (using mdj cyanogen 2.7, nand with magldr 1.12)
I tried searching and havent seen anything like this. Only thing I can think is maybe it got a little wet(?) while I was recording video during a snow storm here, but nothing else seemed wrong, just got home and noticed it. Any ideas?
I have the exact same problem. I've flashed back to the original windows mobile rom and the problem is still there! I've searched and yet to find the solution. Anyone got any ideas?
Check to see if you have a voicemail - you may have read it but closed VM before listening to all the message, it can on occasions do this - it I'm right just ring your phone leave a fresh VM then go into VM and listen to the whole message
Thanks for the reply, but no dice on this one. I tried the voicemail thing and I have no voicemails.
To clarify it's the bottom 5 buttons (call, home, windows, back and power) that are constantly lit up. Even when the phone goes on standby those buttons stay lit. I'm looking to see if there's an app that can just shut them off.
I got the same problem. My hd2 got some water on it and the problem started. The hardware keys now getting dim but not getting completely off. There is no other problem
Please help.
same problem on my father htc click
Ok guys try the bottom of post 4 here:
http://forum.xda-developers.com/showthread.php?t=926507
I use that rom (the 1.7) version and the fix works
johnerz said:
Ok guys try the bottom of post 4 here:
http://forum.xda-developers.com/showthread.php?t=926507
I use that rom (the 1.7) version and the fix works
Click to expand...
Click to collapse
Thanks, I will try the rom.
But do u really think its a rom problem ? The keys light were working fine before the water hazard in the same existing rom. Besides the problem is also there when u are in the boot menu of MAGLDR or Clockwork menu.
any updates from anyone? On miy HD2 the vol up, start, back & end call key don't respond to any presses but seem to be active. Calls will randomly end, vol up acts as if the button is kept pressed!
Help!
Hi guys,
A little bump in this thread, but is there already found a solution for this problem?
After a hard reset and replacing the digitizer of my htc HD2, the buttonlights remain on. Even when the phone gets in standby mode.
I'm using cyanogenmod 7. (bought it like this. Didn't put android on it myself)
After the hard reset and digitizer replacement there also came another problem.
When pushing the windows logo (key 158) the volume up button also reacts (key 115). Thesame problem occurs when pushing the dial button. With that key (231), key 114 (volume down) reacts.
So when i want to open a menu or make a call the volume goes up or down.
Do you guys think I screwed something up when replacing my digitizer or is it just an software issue caused by the hard reset?
All right guys, it was an hardware failure.
I reopened my htc and checked all the connectors and (re)placed some of the yellow tape. After the reassembly, my phone just works as it should. All problems are solved.
My HTC HD2 also got the keys stuck after only a week of use. T-Mobile is sending me a replacement phone today.
Is this a common problem? I'm afraid it may happen again.
Hey guys I'm having same issue. Going to try opening up and check connectors.

Odd rotation behaviour

OK I've had this happen to me for at least three days now and it's finally to the point where I'm posting to see if anyone else has experienced it. I use the Vega in landscape virtually all the time and because of that I lock it in that orientation. However, once or twice an hour the screen will briefly flip to portrait (power button would be on the left in that orientation) then back to landscape. It's very brief and as I said it flips back just as quickly but it's very annoying. It has happened while watching videos too which is more annoying as it takes longer than a browser to change orientation while playing.
I've tried recalibrating it, rebooting the tablet and everything short of reflashing the ROM. I'm really hoping to avoid reflashing to test it as I've finally got the screen calibrated to an almost perfect level thanks to the other calibration app on the MoDaCo forums. Has anyone else had this behaviour before? If so, have you found a fix?
I do not have your exact problem but something similar. Just now I picked mine up and screen was upside down (when the device was right side up i.e. buttons at top and right). I checked the rotation button and it was not locked. When I rotate the device it will not switch rotation at all - when I go into settings and turn off auto-rotation it flips right-side up. It seems like the accelerometer is knackered but it would seem to be working in order to flip it when auto-rotation is switched off. The daft thing is that in various screens it flips to being right side up. It boots up the right way round and the lock screen is the right way round but as soon as unlocked it flips upside down. I too have tried rebooting and all sorts - thinking of flashing it as a last resort.
I seem to have fixed this now. I use quickboot and on a whim rather using my reboot shortcut I used power off. I then used the power button to start up with the rotation lock switched on - when I turned it off once booted it was back to normal. I suspect the rotation switch bit was a red herring - I reckon the shutdown/restart fixed it.
settngs>g sensor>games mode can cause some accelerometer antics try turning on and off
What does the gsensor mode do when activated, as I haven't seen any difference?

On button while not upright

Sometimes the on button doesn't work, this happens to me most of the times when i
locked rotation on landscape
holding the mobi portrait
reading text
screen turns off after timeout
try to turn it on in this position almost never works, this is odd
Turning it upright (shiny LG label below) and the on button turns the machine on properly, as expected.
Anybody recognizes the above? Is there a setting wrong somewhere?
I'm using d802 on latest snapshot, experienced this behavior quite consistently through the latest snapshots.

Categories

Resources