With a theory of more is better tried to improve my signal strenth on my Streak and laptop using a d-link router and range extender.
1: Disconnect from your wifi connection with your laptop/pc, turn off streak.
2: On pc navigate go start > show all connections and right click on the ethernet adapter, double click on TCP/IP properties and choose "use the following IP' then enter the following:
IP Address: 192.168.0.29
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
Preferred DNS Server: 192.168.0.1
Then click OK.
E. Now plug the ethernet cable into your extender and laptop/pc.
F. Now open browser and type http://192.168.0.30 and follow the wizards instructions.
G. Once the setup is complete you will get a warning 'network cable is unplugged' unplug the Ethernet cable!! refresh site survey of your wireless card on your pc.
You should now have a recognisable better signal.
Turn on your Streak and connect to the internet as you did before you should have a noticebly better signal, i now have full signal strenth at over 110ft.
Related
Hi guys,
I don’t know you guys can help me or not well My problem is
I’m trying to connect my I-Mate PDA2k to Senao Wireless Assess point my access point connected with my network switch .My access point showing WAN light and on my mobile also showing “W” its mean PDA getting signals but I can’t access internet from my PDA.
I don’t know how to configure access point I took access point without catalog and serial cord I don’t we use serial cord or not.
In simple words I want 2 access internet without GPRS.
Information:
SENAO
2-port switch wireless router printer server
SL-2511SR PLUS(F200)
MAC 005018578BO
I-Mate PDA2k Microsoft
OS windows 2003 CE
Local network
IP Class Local = 192.168.0.XX
Internet Sharing = ON
Look for help on configuring your the Senao web site for configuring your wireless router: www.senao.com.tw. I have an access point and it's working like a charm with my Blue Angel.
If you don't have a DHCP server or you have not configured your wireless router as a DHCP server, follow these procedures on your PDA:
Tap Start, Settings, Connections (tab), Network Cards (icon), Network Adapters (tab), tiacxwln Compatible Wireless Etherne....
Then check: Use specific IP address. You'll need to set values for IP Address, Subnet mask, and Default gateway. You IP address should be (quoting you) something like 192.168.0.xxx and subnet mask is probably 255.255.255.0
Also be sure to tap on Name Servers, and fill in the info there, you'll need a DNS address to access the Internet.
Finally, to configure your proxy server, go back to Connections, Advanced, Select Networks, and create a new connections and configure the proxy server accordingly, if it exists. If you're supposed to connect thru SecureNAT (ie Default gateway), you can simply ignore this step, or create a network profile that "connects you to the Internet" without specifying a proxy server.
Hi
ihave a O2 XDA IIi and an belkin router
the wireless connection is established and my xda recognise the network but i cannot acess internet
what can i do?
go "setting>connection>network card"
and setup a card for your router.
doesn 't work
I TURN ON WIFI ON XDA IIi the connexion recpgnize wi-fi belkin 54g status connected
start settings/connections/network cards
configure wireless network page
belkin 54g connected
networks toaccess
all available
network adapters page
my network card connects to
work
tap an adaptor to modify settings:
NE2000 compatible ethernet driver (configured with all ip adresses and dns)
L2TP NDISWAN miniport
ASYNC MAC NDISWAN MINIPORT
PPTP NDISWAN miniport
tiacxwln compatible wireless ethernet (configured with all ip adresses and dns)
bluetooth pan user driver
is this ok?
i come back on
configure wireless network page
belkin 54g connected
networks toaccess
all available
i click on belkin 54g
this is what it shows
General
network name belkin 54g
connects to work
Network key
authentification open
data encryption wep
the key is provided for me automatically
802.1x
use IEEE 802.1x network accesscontrol
EAP TYPE PEAP
bUT
start settings/connections/wlan
main
status connected
current config
SSid belkin 54g tx rate auto
modeinfrastructur channel 6
bssid 00-11-50-7F-32-74
MAC 00-09-2D-15-3A-A8
IP 192.168.2.4
SIGNAL QUALITY GOOD
SETTINGS
POWER SAVE MODE
AUTO TURN OFFWLAN IF NOT CONNECTED
LEAP
SSID AUTHENTIFICATION TYPE
BLANK BLANK
IS THIS NORMAL?? SHOULD'n it show
belkin 54g??
when the wifi connected
i play iexplorer
when i type an internet adress
the message : the page you are looking forr cannot be found
thanks for your help..
Have the O2 XDA Exec myself, but the settings should be the same, checked with my Acer N50 to make sure
Leap is blank for me too.
some setting differences betweens yours and mine
neither the NE2000 or tiacswln cards have been touched in anyway, left them as default.
mine is set to connect to 'The Internet'
the key is provided for me automatically is unchecked, I manually typed it in with the key index.
use Ieee 802.1x is unchecked
check the belkin setup page, and see if the XDAIIi is staying connected or it is connecting and disconnecting.
looking at the manual, check the Belkin setup page at Firewall/Client IP Filters and make sure the PDA isn't being blocked there. Also check that the Mac Address Filtering is not enabled, if it is, you will need to add the PDA MAC address into it.
Hi Wytey
Thaks a lot, your configuration works perfectly.
Kisses
Hi.
I've just bought a HTC Touch, and Im trying to setup a WiFi spot with my WiFi dongle from my PSP. It's a 802.11g USB adapter. I've tryed numorus combinations, but my smartphone cant connect to the access point.
My network:
[internet (one IP)] -> Router (IP:192.168.2.1):
Rounter connection #1: My PS3 (IP:192.168.2.200)
Rounter connection #2: PC (IP:192.168.2.100):
- WiFi dongle connected to PC (IP: 192.168.2.150)
When I leave the IP settings to dynamic I get a network error, so I try to define IPs in the TCP/IP Protocol of the WiFi dongle:
IP address: 192.168.2.150
Subnet mask: 255.255.255.0
Default gateway: 192.168.2.1
Preferred DNS Server: 192.168.2.1
Alternate DNS server: blank
I've also tryed the DNS and Default gateway to my PC (192.167.2.100), but my Touch couldn't connect to the spot, although my PC recognizes my phone MAC address. I don't have any firewalls, antiviruses etc.
Any ideas?
Hello,
Yesterday I got a wlan/wifi enabled adsl modem/router for my broadband connection which uses telephone line. I wanted to use the wifi output given by the modem, for my ppc in my home for internet. Something like wireless home networking. As this is the first time, I don't know or I'm a noob. The security settings in modem are :
Network Authentication: Open
WEP Encryption: disabled
When I search wifi signal, My ppc detects the modem; Says connecting and after few mins says unavailable so it don't connects.
Here is the manual : Link
Please help................
Solved : The modem was setted to "Bridging" ( Manual Connecting ) and after setting it to "PPP over Ethernet (PPPoE)" ( Auto connect ), The internet in my ppc is working fabulous.
Thanks and regards
Ok, now my PPC says connected. When I assigned ip in network adapters->wlan setting ( SDIO WLAN Wireless Adapter ).
But another problem here, Cannot use the net. Mean, IE or weather report or IM don't connect to internet.
Is there any MAC filtering set on the box? Are you getting a genuine IP lease, or is it a Windows auto-configured setting (169.254.x.x)?
Just looked at the manual - other things to check:
Is NAT (page 48) enabled?
Is DHCP Server (page 55) enabled on the box with correct IP range, subnet mask and gateway IP?
Rock Kicker said:
Is there any MAC filtering set on the box? Are you getting a genuine IP lease, or is it a Windows auto-configured setting (169.254.x.x)?
Click to expand...
Click to collapse
Rock Kicker said:
Just looked at the manual - other things to check:
Is NAT (page 48) enabled?
Is DHCP Server (page 55) enabled on the box with correct IP range, subnet mask and gateway IP?
Click to expand...
Click to collapse
Hello,
Thanks for the reply.
First, It was auto configured IP setting so in my ppc it was not connecting but after assigning the IP ( IP : 192.168.1.2, Subnet : 255.255.255.0, Gateway : 192.168.1.1 ) the ppc says connected.
OK, I will checkout that NAT and DHCP.
Thanks again.
Hey buddy,
This is right down my alley, if you still need some assistance just pm me.
In the past I would successfully set an Wi-Fi ad-hoc network between my PC (WinXP) and my phone (WM 6.1, Omnia) and shared my PC's internet connection to the phone. The PC used to get an IP 192.168.0.1 and in 20-30 seconds phone used to get an IP in the range 192.168.0.x and the phone successfully received internet from the PC's shared LAN connection. Both the PC and the device were configured to automatic IP address.
But sometimes (like now) I decide to change the wireless network connection's IP to Automatic (because I like automatic settings) and both PC and phone get IP in the range 169.254.x.x (after long waiting) and the phone doesn't have internet. If I manually change the Wireless Network Connection's IP (on the PC side) to 192.168.0.1, then the device gets the right IP (in the range 192.168.0.x) and everything is fine; it has internet.
The question is why when devices are set to automatic IP addresses they do not get the right ones - 192.168.0.x and the phone doesn't have internet.
EDIT: Ok, today I solved my problem. I found out that re-disabling and again re-enabling the internet connection sharing on the broadband LAN changes the IP setting of the wireless network connection from automatic to manual and sets manual IP 192.168.0.1 and subnet mask 255.255.255.0 and everything is fine. So if I change the wireless network connection's IP to automatic obviously I won't have internet and I either have to change it back to manual and enter 192.168.0.1 and subent 255.255.255.0 OR I have to re-disable and then re-enable internet connection sharing and this changes the wi-fi's IP to manual and sets it to (again) 192.168.0.1 and subnet 255.255.255.0