Database Users

SKYPE

I am running the CIngular branded ROM downloaded from this site and every sice the installation Skype will not work. Skype comes up and asks if I want it to connect to the cellular network and when I click yes it immediately says Cannot connet, check network settings.
Network settings are fine, IE works, OPutlook works, no problems.
Any ideas?

If you want to use Voip I suggest you use Sjlabs WM5 beta.
Skype is IMHO too heavy for handleds.

Skype that WORKS w/ Voice feature on PDA/Phone?
Dears,
DOES ANYBODY KNOW WHICH ONE DOES WORK WITH SKYPE VOICE??
I have been researching extensively different types of PDA-Cellsphone combos that WILL work with Skype-OUT/IN voice feature, the Skype.com site provides a list of ones that will not work (such as Jus-Jam and HTC TyTN).
Thank you.
Max

WM6 VoIP & pbxes

Hello everyone!
Situation: I have several VoIP provider (sipgate, 1und1...) My problem is I can only setup a single provider in my phone with built-in WM6 VoIP client.
Solution attempt: I set up an account with pbxes.org. There I added my SIP providers and an extension with username and password. Now I tried to set this up using the Sip Config Tool V2.0.1. Here are the settings:
Sip Server: pbxes.org Port: 5060
(tried others like sip.pbxes.org(com) and the IP)
username: username-extension_number
password: password
That's it. It's not working. The Today Internet-Calling-plugin tells me "searching....", but never to "selected"
I also tried using x-lite on my desktop pc. With the same settings I successfully registered and I was able to use pbxes just as it is supposed to be.
When using sipgate directly with WM6 it works, but not with pbxes.
I am kind of running out of ideas. So any help is really appreciated.
Thanks in advance,
Stefan

Tried several times as well on my S620.
Now, two days ago got a S710 and was curious to test VOIP on it.
Very first time I tried I was thinking everything was fine, at least nearly.
The Today plugin showed "Searching" (like with providers it works with)
The icon for Internet Phone showed up.
Unfortunately it "semi worked" only that time, any other tests I tried the Today Plugin didn't even get into "Searching".
The bad thing is that it did work once, like meaning it could work. Now PBXES status shows as Registered but it isn't actually. The other bad thing is that I tried to post in their forum for help but didn't receive much info back.
Bad luck, but I'll try and try again. Maybe newer files one of these days and our probs would be solved.
Ka.

Subscribe message
I ever check the message from sip server, I found that windows mobile voip client not only send register message, but also try to send subscribe message, I guess that it is reason that some sip server only may work as registra, and not handle correctly subscribe. it seems the reason the client always display "searching", I will try to modify sip server to support subscribe message in the future.

try fring
try using fring...
it supports multiple sip accounts.. and actually register u not just subscribe you.

You are right, Fring or any other 3rd party app connecting to a SIP server can work maybe better than the "builtin" SIP functionality but personally would prefer being able to use a solution where I dial like usual and calls get automatically router to VOIP, not having to switch to a separate app.
This is why I'd rather like the builtin sip stack to work on its own with any SIP provider. I tested it with PBXES but doesn't work. I'm currently renting a VPS with Asterisk (Trixbox) installed and it does connect. Only prob is that even if it manages to register, seems MS VOIP implementation is still not really compatible or suitable for the use I wish to have.
Ka.

This is an old thread but this is the same problem I have on my HTC HD2 (Leo).
Installed sip drivers and voip config cabs and configured it with my account through pbxes and it is not working.
Can someone help?
Android (Moto droid, HTC Hero) I had no problem with pbxes and sipdroid...

VOIP/SIP Clients for HD2

Hi Guys,
Looking for some VOIP/SIP clients for HD2, anything other than PortSIP, Fring or AGEMobile would be preferable!
Going overseas tomorrow and my PortSIP stopped working and wont start working again so trying to find a program that's just as good AND easy to setup as PortSIP (Agemobile confused the hell out of me)
thanks,
Zhuk86

+1 I am in a similar boat. Looking for a stable VoIP solution to work on my HD2.
Ideally, I would love tight integration with the standard WinMo dialer.

+1. Same here!

sip client for hd2
need also a stable sip sofrware for hd2 +1
thnks for help

I tried PortSIP recently on my phoneset, and it works fine. However, as in my grief with all these SIP clients products, I fancy very tight SIP integration with existing Phone Dialer, with the option of editing Dial Plans to define outgoing call rules (was it IPDialPlan.xml ?). I heard this is how it used to be with WM5, but somehow operators have scrapped it out of ROMs in WM6.5.
Ideally, I should just dial my telephone numbers from phone, and based on the dial plan, the phone should direct calls either on SIP or Mobile Network. Am I asking for too much here?
[Loud Thinking]
I am going to bring my trusty old O2 XDA Exec out and put WM5 back on it, and then see if the SIP client can be (easily) configured on it.

bym007 said:
I tried PortSIP recently on my phoneset, and it works fine. However, as in my grief with all these SIP clients products, I fancy very tight SIP integration with existing Phone Dialer, with the option of editing Dial Plans to define outgoing call rules (was it IPDialPlan.xml ?). I heard this is how it used to be with WM5, but somehow operators have scrapped it out of ROMs in WM6.5.
Ideally, I should just dial my telephone numbers from phone, and based on the dial plan, the phone should direct calls either on SIP or Mobile Network. Am I asking for too much here?
Click to expand...
Click to collapse
+1 for me too!

Check my signature for an alternative voip client

Gingerbread VOIP calling problems

Hi guys,
I am not sure if this is the right forum, but at least it is a desire hd.
Their is CM7 nightly #5 installed and I have an issue with outgoing VOIP calls.
Call reception is working quite well.
(Provider is 1und1 germany via pbxes.org, and a asterisk server installed out company)
When doing the call, I can select to use "internet call" and then there appears a red ribon on top of the screen telling me that "some thing is out side of some thing" (Sorry, the message is not very helpful) you can see details on the screenshots.
This happens with every number, no matter which internet provider I use.
To verify that the setting are right, I used SipDroid, and it worked perfectly.
Any hints would be great! Thank you very much

I am on CM7 #5 using pbxes.org and VOIP calling works just fine for me over wifi.

Strange...
Any ideas? Did it work from immediately or did you have to test around a little bit? Did you change the "advanced settings"? Or just Domain, Username and Password?
thanks

I managed to configure freeconet.pl, Polish voip operator on sipdroid. Never tried on wifi, but works good on 3g except sometimes especialy witl low signal may drop or take a while to connect. Not dificult to configure too

Update. On WiFi it works brilliant, like a wired phone domain, username, password. I also played with some codes and stuff but thiswas only out of ccuriosity...
Sent from my Desire HD using XDA App

Hello habnefrage,
Cynogen mod 7(CM7) is not a stable ROM. Its just a custom rom made to improve the overall user interface. It is not developed by your smart-phone company’s developer, hence it might contain certain bugs which are interrupting with SIP tasks. I prefer you install the official android rom and perform the VOIP tasks then. I’m sure you shall get positive results.
Answering your 2nd question, I would suggest other VOIP apps you should try: ringcentral, TheRealPBX.

[Q] VoIP does not work u8800 ICS Aurora 2.05

VoIP (sip calls) does not work u8800 ICS Aurora .....Versions 1.8 - 2.05
Hello everyone, I tested the VoIP but does not work, that is my problem or are experiencing other users!?
I have an account in Betamax (voipdiscount)
In addition I have tried and the following programs:
AGEphone
Bria
jPhoneLite
MobileVoip
Acrobits Softphone
CSipSimple
VoipBuster
BetaMax Dialer Free
etc. etc.
Thanks to all...

I use csipsimple (nightly builds) with Portuguese Sapo account and its working flawlessly. Perhaps the problem is with your account and not with the rom.
Sent from my U8800 using xda premium

mrasquinho said:
I use csipsimple (nightly builds) with Portuguese Sapo account and its working flawlessly. Perhaps the problem is with your account and not with the rom.
Click to expand...
Click to collapse
You are lacky man.
I have problems with SIP VoIP in Aurora. Integrated VoIP in ICS does not work. CSipSimple and Siproid does not work. All programs registers. All make/receive calls. But voice is not transfered. After few seconds CSipSimple transfer huge amount of data via WiFI (20MB and voice not transfered)
Only Linphone Video works. But sound quality is very bad. I test Aurora 1.12a, 2.02, 2.04. Always make full wipe (factory reset, dalvik cache, ...).
I use Linphone Video now but the quality is terrible.
Skype works in Aurora perfectly but I need SIP.
SIP provider is OK. All tested SIP programs works on the same phone with official ROM (and with CM7) but not with Aurora. Also another phones (hardware and software on PC) works without problem with my SIP provider.

Same here.

JaRo1 said:
...I have problems with SIP VoIP in Aurora. Integrated VoIP in ICS does not work. CSipSimple and Siproid does not work. All programs registers. All make/receive calls. But voice is not transfered. After few seconds CSipSimple transfer huge amount of data via WiFI (20MB and voice not transfered)...
Click to expand...
Click to collapse
exactly the same...
Can someone with access to transfer it to DZO?
Thank you all for your answers...

Does your voip account work on another phone or on your PC?
If your VOIP works well on PC but doesn't work on your phone, are you using wireless?
If you're using 3G, very frequently your provider will either block SIP (needed for voip) or charge you extra data out of your data plan... so beware and read all terms and conditions of your data plan.
If you're using wireless, it should work anyway, unless you're not using the correct settings for the voip provider or have another app that is interfering with it.

VoIP SIP in Aurora does not work
peixotorms said:
Does your voip account work on another phone or on your PC?
Click to expand...
Click to collapse
Yes VoIP account works on my PC. And works on another phones also. Even more it works on the same mobile phone but with another rom than Aurora.
peixotorms said:
If your VOIP works well on PC but doesn't work on your phone, are you using wireless?
Click to expand...
Click to collapse
Yes, I use WiFI
peixotorms said:
If you're using 3G, very frequently your provider will either block SIP (needed for voip) or charge you extra data out of your data plan... so beware and read all terms and conditions of your data plan.
Click to expand...
Click to collapse
With another roms (original, CM7) VoIP works over WiFi and over mobile data too without problems.
peixotorms said:
If you're using wireless, it should work anyway, unless you're not using the correct settings for the voip provider or have another app that is interfering with it.
Click to expand...
Click to collapse
Clean install (after format data, system, chace, dalvik cache). And VoIP not working.

Same here
Same here