Has anyone else had a issue with their vibrant displaying the wrong time. I have my phone setup to use NETWORK PROVIDED VALUES, yet it still displays the wrong time and there is no way for me to correct it without restarting the phone. does anyone have any ideas as to what could be the problem.
Related
Hi all!
With the latest Dopod's ROM it was nice for the first month, but now I have strange behaviour.
Sometimes the device does not return from standby/suspend mode. It does nothing at all if I press the power button. The LEDs are blinking as usual and if I call my mobile from other phone, I got no answer signal, whi my Prophet does not ring at all, means that GSM part works. Any alarmas and notifications fails to appear, as well.
I noticed, that the prsence of any extra unclosed applications increases the chance to hang. So far, I have no idea how to workaround it...
Any ideas? Is someone have the same problem?
It happens to me with my JAMin with both the old and the new WWE rom. somebody exolain it with the backlight settings, but nobody really understand why it happen
Someone alse have this problem?
I also had this issue for a time. I performed a hard reset and it stopped happening, so I am going to assume that it probably had something to do with some of the software that I had installed on it. My money is on SPB PocketPlus. I've not installed it since the hard reset and it hasn't happened since.
Any extra ideas?
I have the same behaviour since the very first day i upgraded to the latest rom.
I find that it happens regularly if it does, meaning you soft reset the device to get access again and then sure enough one hour later again the same behaviour. I have been on travel the last weeks, where i did not have a chance to sync the device and I have not experienced this behaviour at that time.
Maybe it has something to do with the Sync Process.
I hope we can dig into this a little more because it is really annoying. Especially if you consider that the phone does not ring anymore so you never know if someone calls or not.
Cheers Ulf
Password?
Have you set a password on your phone? If so, then remove the password and see if it makes a difference.
Yes I use the Password Funtcion on the PDA part and also for the SIM card.
I will try to turn off the PDA password and see what happens.
I keep you posted.
Thanks for the suggestion.
Ulf
___________________________
Dopod 818pro
Hi All,
turning off the PIN function has solved the problem. The effect is reproducible.
Raised a next question though:How to protect from your wife sniffing into your private appointments without using the PIN?
Gruss Ulf
I have no used any passwords, but has the problem. I've noticed that it happens when the phone is charging. But not only that.
i had the same issue...i read before somewhere in the other forums...(maybe this forum but couldn't find it) to adjust the backlight and standby time to the same value..that fixed mine and hope will work on yours.
thycpt737 said:
i had the same issue...i read before somewhere in the other forums...(maybe this forum but couldn't find it) to adjust the backlight and standby time to the same value..that fixed mine and hope will work on yours.
Click to expand...
Click to collapse
Thanks great, so far it helps. If I got the bug agait - I will post. BTW, on the Dopopd's 2.15 it is the only reason for softreset, all the rest works fine!
I have the same problem with prophet touch IX and VIII.
Sometimes, after the device was set to standby (or the display was disabled after some minutes), I can't enable it by pressing the powerbutton.
It seems to have contact to the GSM net (you can call the phone, but it won't ring).
ActiveSync also recognizes the phone, but won't connect.
Maybe this happens less often with battery ~70-100%, but I'm not sure.
The problem occured some weeks after installing Touch IX, and didn't disappear after changing to Touch VIII.
With pdaviet 6, there wasn't anything like this (only the known bootscreen-freeze-problem).
Any ideas?
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.
Recently I have noticed that my clock on my home screen stops completely and i have to constantly set it to the right time.
Anyone else with same problem or know how i can fix the problem?
First stop, hard reset. Make sure it's software at fault. Then reload all your programs/tweaks bit by bit and note when the problem occurs. This should tell you what caused it.
I have hard reseted before this problem. Before I do it again I want to know if there is another way.
I have noticed that it is a 3G problem. When I switch the phone band from Auto (3G) to GSM, the clock fixes it self and updates the clock correctly. When I switch the band back to auto, clock is fine again but gradually loses time and stops again. So I kow it is when I am on the 3G band I have this problem.
Any advice or clues why?
tboy2000 said:
I have hard reseted before this problem. Before I do it again I want to know if there is another way.
I have noticed that it is a 3G problem. When I switch the phone band from Auto (3G) to GSM, the clock fixes it self and updates the clock correctly. When I switch the band back to auto, clock is fine again but gradually loses time and stops again. So I kow it is when I am on the 3G band I have this problem.
Any advice or clues why?
Click to expand...
Click to collapse
how much time does it lose? does syncing with the internet fix it?
I had a time sync problem to do with daylight savings which was fixed with a registry edit.
it loses about 20 minutes to 30 minutes. I never had this problem before. how do I sync it with the internet?
Has anyone found a solution to this. I have exact same problem but it only occurs like once a week I usually lost 5 to 10 minutes and that trick changing Band from auto to GSM and back works for me too.
Is it possible that is operator incident
Same problem here.
I am also experiencing the same problems.
I also noticed this a few days ago. I just switched off and back on and the clock corrected itself.
I've had this problem for some time too; my clock used to lose some 10-12 hours at once, but I've seemed to solve it after I did the following:
Updated S2U2 to latest version, and poked in it's configuration.
Turned off the Automatic Timezone/Clock Correction:
- Settings -> Personal -> Phone -> Timezones.
If this doesn't help, you can use SKTSync in the meantime, to help you correct the clock when it's faulty again. Just run the program, and it will sync the clock to a timeserver.
I don't know if you guys had this issue, but is getting annoying. Everytime I sync my phone to the pc, i get the phone clock advance one hour ahead. What is wrong with this? I set the region right and everything.
thanks,
I have two problems with my HD2:
1: Date periodically resets to 10.06.2000.
2. Time changes one hour ahead.
The phone does it all by itself.
Timezones are set correctly, both on phone and computer. Date is set correctly. My Location is set correctly. I just cant find why it happens.
I have disabled Start/settings/menu/all settings/personal/phone/GSM/UMTS services/Time Synchronisation. But it happens again.
Anybody has also this problem?
Thanx
Time and Date Problem
Does anybody know anything about above problem?
My phone become useless this way. Both time and date are constantly wrong!
(alarm does not work properly too, but there is a thread pretty much covering it.)
I also have problem with the date. Every other day it will set the year to 2001 (the day/month will stay correct).
I installed the update for the calendar, but that did nothing to solve this issue.
Very annoying indeed!
HD 2 calendar and time problem
I have just noticed that launching Garmin Mobile XT resets the date.
How can it be
I will watch closely to determine if there are other causes for this too.
I really would like to avoid hard reset. So much work to do again... and even I am not sure it will help.
I found that it was GpsModDriver that was causing my problem with the date.
After updating to the latest version (1.51) the date problem is gone.
Great, BUT, now instead the time/location changes to "My Location" everytime I use it... I suppose if you don't travel much it's not really a problem, but for me it's really annoying to have to reset the location every time I use the GPS.
Hi there,
I've got a problem with mobile data on my i9505. It randomly keeps turning on every few hours.
Anyone experienced something like this? Or maybe there is a way to find in log, what causes it?
I checked which apps have permission to change network state. As there is plenty of it, I would rather avoid to freeze them one by one to find the one that I am looking for.
Any ideas?