Hi all
Does anyone know how to unbrick the above device.
Basically put new script on SD card (as you normally would!!) tuned on device, update started and left alone for 10 mins, went back to device had tuned off and now all I get when I turn it on is a blank screen - bootloader does not load and SD card is not read!!.
Any help would be fantastic
cheers all
Hello,
look here ther is a topic for EKEN Bricked
http://www.slatedroid.com/forum.php
Related
Please help. This probably happened already to a couple of folks but I cant seem to find the right answer here.
I tried to upgrade my rom to WIN2003 throughthe USB cradle when out of a sudden the USB connection reported a problem. Now my AT&T SX56 is stuck in a white screen:
---------------------------------
Upgrading......
It will take about 5 minutes.
Warning: Do not remove the USB/Serial conn......and so on..
---------------------------------
The good news is that I mad a backup of my ROM with the XDAtools and I have a 128MB card.
However, when I copied the old "2002_rom.nb1" to the SD card and performed a reset I ended up with the same screen....
Now the questions:
1) Am I screwed
2) does the nb1 file on the SD card have to have a specific name/extension to be recognized?
2) or do I need to copy a bootloader onto the SD card, too?
Any help very much appreciated. I don't want to send it my phone to AT&T :roll:
I think I found the missing link:
http://forum.xda-developers.com/viewtopic.php?t=5705
Will follow the instructions and hope for the best
Hello, I'm trying to help a friend fix their wallaby, it turns on & has white scrren with keyboard icon in bottom right corner. Have tired flashing from SD card but get msg stating invalid key. Is there some clear, concise instructions on what to load onto the SD card and how to then flash ie what software and what buttons to push? I've tried a search and not had much success. Thanks
hey
i also want fls my device via
sd card but in bootloader
device dose not show sd down
or any flashing opthon
Hiya guys i have a o2 xda exec but about 2 months ago there was a fault with the usb port broke so i could not charge or sync with the computer so i bought a exturnal battery charger and only today managed to get it fully charged for the first time is there a way of updating to wm6 via the sd slot of the device as i got a 2gb sd and a 4gb sd card
also just to add tried extracking the installation exe and put on memory card , booted the wm5 then used file explorer to access memory card then tapped enterbl.exe it rebooted into boot loader but also now is stuck tried using the http://wiki.xda-developers.com/index...rsal_Technical tried all key combinations any help realy appreachiated
conclusion
i'm just gonna get a new one i cannot be bothered to get the usb fixed it would cost 300 for a new motherboard and so i have decided to get a bnib (for noobs Brand New In Box)
conclusion
Hmmmmmmmmmmm
So today I wake up to see that the buttons on my Tmobile wing are not responding. I reset my phone and it went to a screen that is a RED, GREEN, BLUE, WHITE screen, Which I have never seen before.
It says:
IPL 4.26.0002
SPL 4.26.0000
I found a few helpful threads on this site, one in particular:
[Walkthrough] How to fix your bricked phone (ivanmmj)
I then began the installation expecting to be able to use my phone again.
On the Rom utility program it reads: Congratulations! You ROM update is now complete. Your PDA phone is ready for use.
What next? My phone still shows the same screen. I try to power it off and nothing happens. I reset the phone and it's back to the same screen. Not sure if there's a thread on this but I will continue to look for it. Meanwhile if anyone could help me it would be greatly appreciated.
I am running Windows XP.
Active Sync couldn't connect to my phone.
Thanks!
You will need to search for instructions on how to flash from SD card.
You are going to need a MicroSD card that is 2GB's or less
Just format the card to FAT32, place the ROM file named "HERAIMG.nbh" into the root directory, turn on the phone and press the reset/camera buttons at the same time and it should read the card. It will ask you to press down on the volume slider and it will flash right from the card.
This is just a short version of the actual steps but I thought it would help get you on the right track. Good luck.
-Dan
Thanks alot, kinda new to the whole flashing my phone. Never had issues before, will go get a micro sd card.
Hopefully that works, thanks
Your welcome,
Just make sure your SD card is the standard capacity 2GB or less. If you buy a SDHC card that is 4GB or more it will not work.
Good luck and let us know how it turns out.
-Dan
Alright so i finally was able to get a MicroSD Card with a adapter due to my pc not accepting MicroSD Cards. Now I'm looking through threads (using the search option) Trying to find something that will assist me in the process. From what I have found so far, I only find guides for other phones or other ways of fixing your phone. Have yet to find one that helps me bring my phone back to life.
If anyone can, please link a thread that will help me. Meanwhile, I will still be looking for a thread.
Thanks in advance!
Hi all,
I need help...
I have been using AmericanAndroid for a while, I transfered files from my PC to the SD card, but when I put the SD card back into the HD2 android no longer boot. I am stuck on boot animation.
FYI I had been on 082811 for a while with no particular issues.
This is kind of nightmare since I have lost loads of data.
I would be very very greateful if someone could help either:
- get back my data from my PC from the SD card
- find a way to boot again in android on my HD2.
Looking forward to hearing from somebody...
Please help. Need to regain access to some important data.
Sent from Ben's Galaxy Nexus