I need help overclocking - myTouch 3G, Magic General

I've been trying to install overclocked kernals for the mt3g all day and when i flash them my phone gets stuck at the boot screen. Can anyone help me out please ?

Be aware that most kernels are intented for specific ROMS.
"Based off dumfuq's latest OC kernel for CM5".
Here's a link to an universal kernel (2:
UNIVERSAL OVERCLOCK VERSION 2.0
Source:
http://kingxklick.com/forum/viewtopic.php?f=4&t=81

Related

Kernel not changing or showing up

I tried installing a Kernel for my G2 on MIUI 1.4.1
The Kernel was SavagedZen 2.00 CFS , I also tried the pershoot kernel for Gingerbread but the problem is that every time I install it and go into settings -> about phone; the kernel information doesnt change it stays the same for both kernel installations
What am I doing wrong and how can I install the Savaged kernel properly? Thank You
I can't say that I've heard of that particular kernel for the G2/DZ (a quick Google search reveals that this is a EVO kernel).
Try to do more research and investigation before you start flashing. Not doing so could mean a bricked device.

[Kernel] Clemsyn's Kernel for 1.2 bootloader only Froyo/Ginger/Honeycomb Version

This is my version 11 kernel specifically build only for Bootloader 1.2. Just for you information. Bootloader 1.2 allows us to flash adam ROMS etc...This should also work for zpad. So if you updated to 1.2 bootloader and would want to go back to your old rom (Vegan, TNT, Clemsyn+Caulkin combo) all you have to do is flash the ROM and then flash the kernel and you should be good to go. Here is the link.
FROYO VERSION
https://rapidshare.com/files/939609138/1.5Froyoupdated1.2.zip
Gingerbread Version
https://rapidshare.com/files/1670575864/1.5boot1.2Gingerupdated.zip
Honeycomb Version
https://rapidshare.com/files/596821934/1.5boot1.2HoneyComb.zip
BTW, I only tested this in my Clemsyn+Caulkin Combo, but should also work for Vegan and TNT.
Updated Froyo version (AGAIN
Updated link for the Froyo version...
Clemsyn,
I appreciate all you and Roebeet's work on bringing HC to the gTab. I installed BOS a2.3 Saturday and your version 11 kernel Sunday. This morning I install BOS a2.4 and reinstalled your version 11 kernel. Each time I look at the Kernel Version it says 2.6.32.9-clemsyn-g568f750-dirty. Am I doing something wrong or have you been too busy to update the version number?
Regards,
Daris
darisb said:
Clemsyn,
I appreciate all you and Roebeet's work on bringing HC to the gTab. I installed BOS a2.3 Saturday and your version 11 kernel Sunday. This morning I install BOS a2.4 and reinstalled your version 11 kernel. Each time I look at the Kernel Version it says 2.6.32.9-clemsyn-g568f750-dirty. Am I doing something wrong or have you been too busy to update the version number?
Regards,
Daris
Click to expand...
Click to collapse
That is right, but if you use BOS a2.4, there is no need to flash my kernel since it is already in the ROM
Good to know. Thanks! I am looking foward to future updates.
overclocking
can the hc kernel be overclocked and if so how? set CPU will only clock to 1000.
Bluetooth is broken
clemsyn said:
This is my version 11 kernel specifically build only for Bootloader 1.2. Just for you information. Bootloader 1.2 allows us to flash adam ROMS etc...This should also work for zpad. So if you updated to 1.2 bootloader and would want to go back to your old rom (Vegan, TNT, Clemsyn+Caulkin combo) all you have to do is flash the ROM and then flash the kernel and you should be good to go. Here is the link.
FROYO VERSION
https://rapidshare.com/files/939609138/1.5Froyoupdated1.2.zip
Gingerbread Version
https://rapidshare.com/files/1670575864/1.5boot1.2Gingerupdated.zip
Honeycomb Version
https://rapidshare.com/files/596821934/1.5boot1.2HoneyComb.zip
BTW, I only tested this in my Clemsyn+Caulkin Combo, but should also work for Vegan and TNT.
Updated Froyo version (AGAIN
Click to expand...
Click to collapse
can you explain how to update this boot loader?
can i use cwm ?
xkwwwx said:
can the hc kernel be overclocked and if so how? set CPU will only clock to 1000.
Click to expand...
Click to collapse
CPU master is the only app that allows me to activate the OC kernel.
clemsyn said:
This is my version 11 kernel specifically build only for Bootloader 1.2. Just for you information. Bootloader 1.2 allows us to flash adam ROMS etc...This should also work for zpad. So if you updated to 1.2 bootloader and would want to go back to your old rom (Vegan, TNT, Clemsyn+Caulkin combo) all you have to do is flash the ROM and then flash the kernel and you should be good to go. Here is the link.
FROYO VERSION
https://rapidshare.com/files/939609138/1.5Froyoupdated1.2.zip
Gingerbread Version
https://rapidshare.com/files/1670575864/1.5boot1.2Gingerupdated.zip
Honeycomb Version
https://rapidshare.com/files/596821934/1.5boot1.2HoneyComb.zip
BTW, I only tested this in my Clemsyn+Caulkin Combo, but should also work for Vegan and TNT.
Updated Froyo version (AGAIN
Click to expand...
Click to collapse
Using bottleofsmoke with your kernel now, great job.
forum search is down.
May I know where to get rndis_host modules for the kernel, want to use usb tethering.
I'm wondering what for this 1.2 Ginger kernel for since I cannot find any Ginger ROM using 1.2 boot loader. Anybody can make use of this clemsyn kernel for Ginger?
dony71 said:
I'm wondering what for this 1.2 Ginger kernel for since I cannot find any Ginger ROM using 1.2 boot loader. Anybody can make use of this clemsyn kernel for Ginger?
Click to expand...
Click to collapse
its postulated that you can restore a backup of a 1.1 ROM while using the 1.2 BL and then flash the 1.2 kernel in order to get the ROM working. This needs to be tested.
I got stuck myself running the CM7 2.3.4 nightlies.
Oozura said:
its postulated that you can restore a backup of a 1.1 ROM while using the 1.2 BL and then flash the 1.2 kernel in order to get the ROM working. This needs to be tested.
I got stuck myself running the CM7 2.3.4 nightlies.
Click to expand...
Click to collapse
That is the right process in which you can restore run 1.1 ROM, and then flash it with Clemsyn's or Pershoot's NEWBL kernel.
rob_z11 said:
That is the right process in which you can restore run 1.1 ROM, and then flash it with Clemsyn's or Pershoot's NEWBL kernel.
Click to expand...
Click to collapse
No go for me
I have BL 1.2 which I got earlier by flashing stock 4349 and update to HC BoS
HC BoS has already CWM 3.028
I cannot update any 1.1 Ginger ROM (Tried Vegan, Vanilla, Harmony) using CWM 3.028
The error message :
assert failed: getprop("ro.product.device") == "harmony" || getprop("ro.build.product") == "harmony" ||
getprop("ro.build.product") == "harmony"
E:Error in /sdcard/download/G_Harmony_Gingerbreadv2.4.zip
(Status 7)
Installation aborted
i just turned on my new g-tabler for the first time. it wants to update from 3551 to 3991, would that put me on 1.2 ? or doeso only the 4xxx update move to 1.2?
Also, i read 1.2 is locked and does not allow custom kernels, this seems to be a custom kernel for 1.2, so was that info proven wrong? the thread is locked so i cant ask there
i am looking for stability and full hw accel (and something actively developed) can someone suggest a rom?
I do part-time android developer, you can see my apps/projects in my sig, I may see how I can contribute to the g-tablet now that I have one
thanks!
bandroidx said:
i just turned on my new g-tabler for the first time. it wants to update from 3551 to 3991, would that put me on 1.2 ? or doeso only the 4xxx update move to 1.2?
Also, i read 1.2 is locked and does not allow custom kernels, this seems to be a custom kernel for 1.2, so was that info proven wrong? the thread is locked so i cant ask there
i am looking for stability and full hw accel (and something actively developed) can someone suggest a rom?
I do part-time android developer, you can see my apps/projects in my sig, I may see how I can contribute to the g-tablet now that I have one
thanks!
Click to expand...
Click to collapse
I think 3991 using 1.2 boot loader
To make easier update, see roebet honeycomb thread
You will find everything there for upgrading to 1.2 BL
I suggest to use 1.2 based ROM since more upcoming ROM such as honeycomb will use 1.2 BL
Lot of people say calkulin+clemsyn combo 6 is fast stable ROM
Btw, if you know some android! programming, maybe you can
work on Bluetooth DUN dial up client application.
Gtab only has wifi, meaning when travelling and can't get wifi, it's cripple
There is solution already with android phone to have wifi tethering.
But for people don't have android phone, Bluetooth dun tethering will be better
choice since most of smartphone have Bluetooth DUN capability.
I think this what lot of people missing now in gtab.
I have study a bit and find out in fact android git already implement Bluetooth dun
functionality. However missing DUN dialer application.
Only Archos makes their own DUN shipped with Archos 70 series
Clem is it possible to get a 1.6 oc version of this for 1.2 honeycomb? I had my tab up to 1.6 on 3.1.4 enhancement and was stable and flying. Like to push it as far as I can.
The link to the rapidshare download for Gingerbread doesn't seem to be working. Is there an alternative place to pick it up?
gkitab said:
Clem is it possible to get a 1.6 oc version of this for 1.2 honeycomb? I had my tab up to 1.6 on 3.1.4 enhancement and was stable and flying. Like to push it as far as I can.
Click to expand...
Click to collapse
I am also having issue dloading keeps dloading a html file both from here and SlateDroid. Tried skyfire as well, no good. Would really like to see a 1.6 one.
Hey Clemsyn,
Now that rayman has a mostly working 2.6.36 kernel for Adam and they are close to having useful honeycomb roms that run on it, including full hardware acceleration, is there any hope that you'll get in to his git and make a gtab kernel out of it?
I did try booting a boot.img that rayman gave me, and then also the ic1.zip which is a full test rom, but nothing gets past the Viewsonic birds. He has some ideas, and knows changes need to be made for Gtab. It would be great if you could get involved.
MC

[Q] How to implement Rafpigna 1.9 OC GB Kernel into your rom of choice?

Is it possible to edit the meta-inf files to tell a rom to use Rafpigna 1.9 OC GB kernel in say Hyperdroid cm7 2.1.0 tytung r10 rom? Like take the files from the standalone kernel and integrate them into a rom to allow for it to work correctly? Given the kernel is compatible with the rom. The reason why I'm thinking about doing this is, because I can't get the rom to boot with any rafpigna kernels. They all hang on boot.
THANKS
I too have problems flashing Rafpigna's kernels
I've tried raf's latest kernel on Hyperdroid, Typhoon & MIUI ROMS all with the same results, on reboot, hangs on providers splash screen (o2 in my case).
I've tried flashing via ROM Manager, CWM & using fastboot commands (Clk for Dummies).
Help please
nickclarke said:
I've tried raf's latest kernel on Hyperdroid, Typhoon & MIUI ROMS all with the same results, on reboot, hangs on providers splash screen (o2 in my case).
I've tried flashing via ROM Manager, CWM & using fastboot commands (Clk for Dummies).
Help please
Click to expand...
Click to collapse
For the moment. I found the perfect combo. Hyperdroid 2.0.1 android 2.3.3 w/ rafpigna's 1.8 oc nosense. Working Perfectly!

[Q] how to change voltage under flexReaper R12

Hello,
Acer A500, running latest FlexReaper (R12).
I would like to change the voltage of the processor
(specially when screen is off, and wifi is off : I switch off the wifi when tablet is sleeping)
with Voltage control and SetCpu it seem that I can't
is it a kernel limitation ?
I don't find other kernel easy to install, without changing the rom
any help would be great
Olivier
Hey orobin. It's a limitation of the kernel right now. You can't overclock or underclock flexreaper right now. Currently there are no kernels available to do this unless you try Thor's ICS rom which can be found on tegraowners. No overclockable ICS roms on XDA though.

Cannot overclock higher than 2.26GHz?

Hi, I have a Samsung Galaxy Note 3 N9005.
I installed a custom recovery and rom 2 days ago, first rom being phronesis 2.0 rom.
From there I tried overclocking my device but all apps show me 2.26ghz is the max my device can go, apps used include: kernal auditor, setcpu, trickster mod and no frills cpu control.
I searched the forums a bit and so I thought flashing a new kernel would help. I flashed Arter97s kernel and it still didn't allow me to overclock higher than 2.26 ghz, then I tried audax's kernel with no luck.
Then today I moved on to Tesla 5.1.1 Rom, and I still cannot overclock higher
I yet again reflashed arter97s kernel and still I am having no luck.
Any help?
Thanks
owner eod
This is the limitation of the kernel. It provides the frequencies it supports, so you need a kernel with OC support. I do not OC, so sorry, no clue which to take which even is allowed to talk about here. ShinTo was supporting it AFAIK, but they had to leave due to not providing the source and thus violating the GPL.
Overclock
emuandco said:
This is the limitation of the kernel. It provides the frequencies it supports, so you need a kernel with OC support. I do not OC, so sorry, no clue which to take which even is allowed to talk about here. ShinTo was supporting it AFAIK, but they had to leave due to not providing the source and thus violating the GPL.
Click to expand...
Click to collapse
I am able to overclock my 9005 up to 2.7GHz with mentioned apps. I am not sure which kernal I am using. I have Phronesis 5.0 on and am getting ready to flash 5.2. The only shlep is that I need to set the frequency after each reboot. I wish this could be included in a kernal.
Try using leankernel: http://forum.xda-developers.com/showthread.php?t=2488082 I had same kind of problem then I flashed this and used kernel auditor. Now everything works perfectly!
Can't Flash Kernel on note 3 sm-n900
I have been looking for solution at multiple sites. Hope to get answer here. I have downloaded a stock rom lollipop for my note 3 sm-n900.
I was successful at overclocking it to 2.1ghz but i want it to be at 2.7ghz and the current kernel does not support it.
I tried flashing three different kernels lk-hltemo 6..., lk-hlte v6 and lk-hlteu 6... using CWM and TWRP but kernel didn't flash.
Somebody pleaseeeee helppppp....
Read the thread .
But if you dont know what you are doing you will brick your phone .

Categories

Resources