Related
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Same thing here.
It charges through USB but it doesnt connect.
If i choose the storage option it works fine.
I want to sync my outlook and i cant...
What the heck...?
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Come on... give something drastic!
Already done that, rebooted the pc and the hd2...
still nothing
djchubbs said:
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Click to expand...
Click to collapse
believe it or not i have done that mannyy times and did alot of device manager things to try and let both computers recognize the hd2 but still nothing haha..
ive had previous hd2's and they've all connected fine untill this one, maybe its this specific one thats giving me trouble. but regardless, it charges via usb then it should be able to recognize it
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
johncmolyneux said:
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
Click to expand...
Click to collapse
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
k20a1 said:
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
Click to expand...
Click to collapse
That is very weird. Sorry mate - never heard of it doing that for anyone before.
Make sure you have the mobility center/active sync program installed on your computer. Without it it won't work.
On Vista or Seven, with the HD2 plugged in, you can find the program/drivers by launching and refreshing manually Windows Update. On XP you have to do that manually.
Good luck.
This happens to me often. In my case I have found it to be a weird driver issue. Go to device manager and look for the yellow triangle. Right click and update driver software. This worked for me I hope it helps.
bit late but just flashed maxsence and i love the look, but have allready had to restart by phone 10 times in 10 minutes. I'll wait for the next release. back to GTX for now.
Good work NRG. keep it up.
this is one of the many WM6.5 errors!
need Android soon!
Ok here we go.
The phone did not connect through activesync to my pc. When i selected to connect as mass storage it connected.
I checked for driver issues in device manager but nothing came up.
I checked the hd2's activesync. Bingo! the activesync was crashing when i was running it. I had to hard reset the phone.
Now it works fine.
My guess is that maybe a program that i installed recently was buggy and created this particular problem. Unfortunately i have about 50+ programs installed (including themes etc) and i m not sure which one it was.
I was installing all the programs again today one by one and after the install process was completed i connected the hd2 to usb to find which app was the problematic one.
After installing almost(some were found useless) all of the apps (here is the crazy part) the hd2 still was connecting through activesync....
HTC will drive me nuts...
Anyway the phone now connects correctly.
I cant understand which was the problem....
as odd as it may sound i think i figured it out.
i think its the usb cable that im using, i have to wiggle it around for it to connect to active sync but once it connects its not a stable connection as it cuts in and out.
but charging capabilities work though!
pos wire, i ordered a new wire and if that one fails also, i will have to get my hd2 replaced for faulty usb port
thanks for all the replies much appreciated
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
angelossssss said:
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
Click to expand...
Click to collapse
i did whenever i custom rom'd it, it still does the same thing. yes it will connect via usb while in bootloader but will not during regular phone operations lol
"Disk drive" mode not working with XP laptop
HD2 is working fine with my desktop, but wit laptop I can only use ActiveSync to browse files.
When I connect the USB cable I get:
"Found new hardware wizard"
but it tells me that it Cannot Install This Harware - Disk Drive
"An error occurred during the installation of the devie The system cannot find the file specified"
And I only have "Finish" to click - if I click it the wizard lunces again immediately and goes on and on with no end.
HD"/Leo does not appare in Disk Manager (I know ablut the drive lettering issue)
I'm sure its my XP issue, but I havent found drivers to fix that, and I'm not about to reinstall XP on my lappy in near future.
Transfer files - Solved
;
k20a1 said:
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Click to expand...
Click to collapse
I share the same here and I was despaired of trying to solve it with any logical, as well with illogical, measures. Such as: rebooting, changing usb cables, reinstalling activesync 4.5, etc.....etc...blla..blla...blla...
However, I solved the "Transfer files issue" by taking out the sd card from the HD2 and connect it with an external cards reader to my pc.
The card reader connected and works with the same usb cable that does not work with the HD2.
That way I load it with all files and in the same occasion I reload into my computer the daily spb backup files.
However, I have the feeling that the reason for that problem is a missing file/driver named: "Setup1.SPL" in the pc windows operating system.
In order to solve that it seems that only reinstalling windows on my pc will be the solution which defiantly do not like.
I have tried just about everything to get my Xoom to work with my 64bit Windows 7 system, but the various steps do not work. What is even more odd is that I have a laptop with windows 7 64bit enterprise that works perfectly with the Xoom.
So here are the symptoms:
1) When I connect the Xoom without debugging on, it tries to install a driver, but fails with a message about MTP drive failure.
2) When I turn debugging on, it installs a driver and tells me that the Xoom installed, but then my computer goes wonky. I can't open "My Computer", it like Windows Explorer freezes up. As soon as I disconnect the Xoom, my desktop works correctly again and I can go into "My Computer".
A few times i've gotten into "My Computer" after the Xoom installed, but when I double click on the Xoom icon it just times out.
The only difference I can think of between this PC and my laptop is that in the past I've connected my Droid X to this PC, and used those drivers. I'm not sure if it is some sort of issue because of the X or what. I've installed, uninstalled, cleaned, restarted, etc... with the Motorola drivers.
Its driving me nuts. Has nobody else had this problem?
Did you try different USB ports on your computer? I was kind of experiencing the same thing. I'm also running Windows 7 Enterprise x64. My explorer window would freeze up when I tried to transfer data from my PC to the Xoom. While frozen, switching from/to normal/debugging mode would unfreeze things, until I tried copying again.
My problem was resolved when I connected my Xoom to another USB port on my PC, one that was integrated with the motherboard. Previously, I was plugging it into one of the front USB ports.
So my suggestion is to try a different USB port, preferably one that's on the back of your PC.
i ran into the same issue as well.
this was fixed by changing to a different usb cable, and inserting it into a different port.
if you're connecting it to the front of your computer USB connector, try connecting via back of your desktop computer.
this worked for me.
Like another poster has suggested, the usb ports on the front of the base unit or ports on a usb hub might not be powerful enough to run the Xoom. I've had the same thing with external hard drives.
Sent from my Desire HD using XDA App
I've successfully connected my xoom to 3 Win x64 Enterprise boxes.
If I had to guess, I'd say that your front USB ports are either failing or under powered. I assume that you've tried a USB port on the back?
Sent from my Xoom using XDA Premium App
I rooted my NC from 1.1.0 using autonooter awhile ago and it works pretty well in general. I used to be able to hook it up to my home PC (w7) and my work PC (XP) with no problems. ADB worked (usually), the drives showed up, etc.
Everything still works on the work PC, and another W7 PC I tried it on.
Now, for some reason, neither the NC nor its SD card show up on my home PC when I plug it in! The NC shows the normal "USB Mode" screen when I plug it in, and my PC makes the USB Ding sound. But no new drives show up.
The only thing I can think of that changed is around the time it stopped working, I replaced my old USB Card reader with a new one (old one didn't work with SDHC). I also renamed some drive letters to reorganize them, since the card reader always shows 4 drive letters in windows.
I don't see the USB controller entry for the NC that I used to see in Device Manager either.
Check for NookcolorUMS app
I was having some bizarre connection issues with my PC, too, and they seem to have been corrected (at least they haven't recurred) by using a USB extension cable. It makes no sense, and I didn't do it to attempt a fix, but just noticed that the issues seemed worst when plugging into the top-side 'convenience' USB ports, and had an extra extension cable sitting around, so I plugged that into a rear port to make access less awkward. Since then, the PC consistently mounts everything just like it should.
I'm still using the NC's data cable, just plugging it into a maybe 1' extension cable rather than directly in the slot.
my XP based computer won't see the rooted NC either, however I will have to try using a port on the motherboard as opposed to one of the front mounts and see if that does the trick. I just kinda gave up on it as I didn't really need it too bad (I only use my nook for email, web browsing, and to control my DVR).
Well I unrooted my NC as I had planned anyway to upgrade to 1.2, but the problem hasn't gone away.
I tried plugging into an extension cable I have that goes directly to a MoBo rear port, but no change.
I can't run the nookcolorUMS now that I'm unrooted. Maybe I'll try it when I re-root eventually.
The thing is, it works on every other computer, so I can't figure out why it would stop working on just this one. It seems like it must be a windows issue, but I'll be damned if I can figure out what it is.
I don't bother with usb
USB connectivity is so unreliable that I don't even bother with it.
To move files around I use File Expert/network to access the PC via wireless from the device.
It's easy, reliable, and FAST.
framitz said:
USB connectivity is so unreliable that I don't even bother with it.
To move files around I use File Expert/network to access the PC via wireless from the device.
It's easy, reliable, and FAST.
Click to expand...
Click to collapse
That's a good tip. Unfortunately you have to use USB for certain functions, like manual nooting, or synching with Calibre (I suspect).
Once I'm rooted again I'll probably start using wireless for small stuff, but if I'm moving a gigabyte movie over, I'm not sure how long that will take, or how much battery it will use.
Does anything come up in device manager when you connect it? If so, did you try deleting anything that does come up, disconnect and start over? Worth a shot....
You don't have to guess--if you see a USB device that might be the NC, open properties>details and from the dropdown choose "hardware ids." If the number 2080 is in the id, it's the NC.
Nothing new comes up in device manager when I plug it in. It used to...
I experienced a similar issue and this was what causing it.
1. I have 2 front USB connections (nothing connected to either)
2. External Power USB hub connected to a rear USB slot
On Win 7, whenever I plug-in the NC via USB, I got a device not recognize error. I tried plugging it into different ports and pretty much either got no detection or device not recognize. Here is the kicker, as soon as I plug it into the usb hub, window recognize and mount it right away. This also happen to be true if I remove the usb hub altogether.
hey guys.
i just tried copying an avi file from my pc to the phone. i had already selected Media device (USB 3.0) in the pull down menu.
first it disconnected as it had initially first connected via Media device (MTP) and then reconnected and brought the auto play dialogue up. after a few seconds it disconnected itslef again and then reconnected. it seems to randomly want to disconnect and reconnect when it wants to.
even while it was apparently still reconnected, i tried to copy a file over to it and it first said i might not be able to play the file did i want to copy it anyway, i clicked yes, then it says the device has either stopped responding or has been disconnected even though it still appears to be connected.
if i switch back to MTP it still warns about maybe not playing the file but then after clicking to still copy across, it copies fine.
i am running windows 7. i have used this usb 3.0 port fine with a usb thumb stick i have. also, windows says it has installed the device successfully when i click over to usb 3.0.
so.... any ideas why it randomly wants to dis/re connect? and why will it not copy across even when it appears connected?
thanks guys.
marc.knuckle said:
hey guys.
i just tried copying an avi file from my pc to the phone. i had already selected Media device (USB 3.0) in the pull down menu.
first it disconnected as it had initially first connected via Media device (MTP) and then reconnected and brought the auto play dialogue up. after a few seconds it disconnected itslef again and then reconnected. it seems to randomly want to disconnect and reconnect when it wants to.
even while it was apparently still reconnected, i tried to copy a file over to it and it first said i might not be able to play the file did i want to copy it anyway, i clicked yes, then it says the device has either stopped responding or has been disconnected even though it still appears to be connected.
if i switch back to MTP it still warns about maybe not playing the file but then after clicking to still copy across, it copies fine.
i am running windows 7. i have used this usb 3.0 port fine with a usb thumb stick i have. also, windows says it has installed the device successfully when i click over to usb 3.0.
so.... any ideas why it randomly wants to dis/re connect? and why will it not copy across even when it appears connected?
thanks guys.
Click to expand...
Click to collapse
Make sure you have the latest Samsung USB drivers on your PC. If you think you do, I would go to the device manager and uninstall your phone from the device list and then let it reinstall the drivers. Downloading Kies 3 also installs the drivers on your PC.
mvansomeren said:
Make sure you have the latest Samsung USB drivers on your PC. If you think you do, I would go to the device manager and uninstall your phone from the device list and then let it reinstall the drivers. Downloading Kies 3 also installs the drivers on your PC.
Click to expand...
Click to collapse
thanks mate but i have already tried them.
it does charge fine so i'm not sure whether it is a power issue but the issue of it disconnecting must have something to do with not transferring anything over even though it still appears connected when i am trying.
i read somewhere that due to it's quicker data transfer, the pc and device need to send much quicker signals to each other to let them know that they're still attached. by using an extension lead inbetween the device and usb 3.0 socket i was delaying that signal sufficiently to make the pc keep thinking the phone wasn't attached anymore. i removed the extension lead and sure enough it copied across fine.
the odd thing is that both a usb thumb drive and my 2tb backup external HDD work fine over the extension. maybe the note 3 is slower at sending that signal to start with? dont know but it now works.
Just recently i tried to transfer for the first time, some wallpapers to my phone, and when i plug in the usb, the phone starts to charge normally but i cannot figure out why i cant transfer files from pc to phone or vice versa.
When i plug it in, it gives me the option to select what to "Use USB for", but when i select either MTP (file transfers) or PTP (transfer photos or files), nothing happens. I cannot browse the phone to pick anything at all.
When i go to device manager on PC i see under Portable devices the name of my phone (Moto G4 Play) but it has an exclamation point next to it. I have tried to uninstall and re-install or even update the driver but it will remain this way (if i click its propierties it tells me "This Device cannot start. Code 10"
Is there anything else i can do either on my phone or pc to make this work?
Other info:
Already downloaded motorola device manager to see if it would help but nope.
My PC OS is windows xp (yeah, i know... :laugh
My PC OS is windows xp
Click to expand...
Click to collapse
That probably explains everything
I don't think there are compatible drivers for Windows XP..
Long term support for WinXP ended three whole years ago. Though what I noticed with CM and Lineage is that the first time the phone is set up, it won't enable MTP even if checked. You have to reboot the phone and then MTP will actually enable properly.
Also, it may happen with 3rd party cables too. I myself faced this issue with Boat Indestructible cable, then I used the original cable that came with phone and successfully done it. But I still can't understand, how that cable can transfer data to/from other phones....
Just another bit of info:
Today while trying to make it work, i updated the driver from the Device Manager again and somehow i could access the phone as intended.
The problem is that after a few seconds, the window closes on its own! Then i have to redo the whole process and It gives me access again but every time, after a few seconds, the browsing window closes on its own!
I have tried with other cables and no dice, tried also rebooting phone and pc and also tried plugging it to all available usb ports. Any other tip or method i can try?
Try another pc to discard things (so you know if it's the pc or the phone)