Related
Hello, I have upgraded my galaxy tab (pda jj3-phone jid - csc jj2) to roto jmi firmware with odin 1.7. all the process seems to be ok, no error message.
After rebooting, the device hangs on galaxy tab samsung logo. factory reset is no longer possible. Does anybody have a idea?
Many thanks in advance.
ZK
Ever heard of "if it ain't broke dont fix it"? So, there you go
sure... sure but now it is
Try using volume UP rocker + power button.
This should put the phone into recovery.. Then you select reset to factory defaults. That should do the trick.
thx kragebein, unfortunately my device won't to go in recovery mode
Are you sure you are doing it right? Hold down the up volume rocker and the power button at the same time until you hit the recovery screen? Optionally you could try to see if you get it in download mode, and reflash your phone.. i had severe problems with mine, but got it fixed today by using roto-jma rom..
Sent from my GT-P1000 using XDA App
Yes, I think I dit it right. Download mode can be activated with volume down & power, but not recovery mode with volume up & power. I have tried to load the firmware again without any error message, but no way.
zolakero said:
Yes, I think I dit it right. Download mode can be activated with volume down & power, but not recovery mode with volume up & power. I have tried to load the firmware again without any error message, but no way.
Click to expand...
Click to collapse
Same here. Whatever I do (flash) I don't get past the Samsung Boot screen.
zolakero said:
Hello, I have upgraded my galaxy tab (pda jj3-phone jid - csc jj2) to roto jmi firmware with odin 1.7. all the process seems to be ok, no error message.
After rebooting, the device hangs on galaxy tab samsung logo. factory reset is no longer possible. Does anybody have a idea?
Many thanks in advance.
ZK
Click to expand...
Click to collapse
You need to flash a complete rom, like Roto JME FULL v.4 with the tab in download mode. He gives complete instructions.
Some releases are just upgrades, so start with a complete rom.
rangercaptain said:
You need to flash a complete rom, like Roto JME FULL v.4 with the tab in download mode. He gives complete instructions.
Some releases are just upgrades, so start with a complete rom.
Click to expand...
Click to collapse
I have tried that and either it fails to upload the primary bootloader (boot.bin) or it stays the same after flashing: it doesn't go beyond the first Samsung Screen. No adb connection possible.
How can I flash a primary bootloader without protection? With JTAG only?
A forum member, Rotohammer used a Jtag box to fix the bootloader issue. He doesn't recieve PM's, but someone he collaborated with to solve the bootloader issue is a fellow named Chainfire. Perhaps you can contact him for the procedure.
But when you flashed the JME did you use the hidden .pit file with repartition selected?
If I was in your spot I would
1. turn off the tab (push power button for 10 sec)
2. then push power and volume down to go to download (yellow digger screen or phone and pc screen)
3. Connect to pc with odin3 already opened, wait until the yellow box shows the connection
4. Load the p1_hidden.pit and check repartition
5. Flash that, then power off, go into DL again, load and flash JME v4 full rom
6. Now flash a modem
hi guys im thinking that u guys may have flash a lock bootloader rom
or u actually already have a lock bootloader rom
try load a roto jme v4 full version see if it works~
1. download odin 1.7
2. download Addon-JME-Modem.zip / P1_add_hidden.pit / Roto-JME-Full-v4.zip from http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
3. and follow the instruction here http://forum.xda-developers.com/showthread.php?t=895827
I wish i said that.
zolakero said:
Yes, I think I dit it right. Download mode can be activated with volume down & power, but not recovery mode with volume up & power. I have tried to load the firmware again without any error message, but no way.
Click to expand...
Click to collapse
It is there u just cant see it. Try to flash jj4 bootloader and see if u could go to recovery mode
Sent from my SGH-I987 using XDA App
The bootloader mentioned above is in a thread about the black screen and white line you are experiencing. It has the link to that jj4 file.
rangercaptain said:
But when you flashed the JME did you use the hidden .pit file with repartition selected?
Click to expand...
Click to collapse
Thanks, but this didn't help. I think it may be a hardware issue (e.g. the kernel can't be loaded, panic or something). I will return my tab tomorrow.
NOTE : this is not my own procedure but i just wanna share this with you guys since some tab users here are having problems restocking their tab to gingerbread, i have also added some notes and troubleshooting in case there will be an issue flashing the rom
link to the original post credits of course to the writer > how to restock p1000 to gingerbread 2.3
btw, this is a complete and full tutorial/step-by-step guide on how to restock gingerbread rom, so if you did not download all requirements, restocking wont be successful
my story and experience : hey guys, yesterday night, i softbricked my galaxy tab p1000 which was running cm9, it turned out like that when i went to recovery and wipe all data, cache, dalvik, even system, and boot. i tried reflashing the cm9.zip but as it was installing its update, my tab suddenly boot into battery icon, meaning it was already empty (maybe, dont have any idea), then, since it was already 12 midnight, there were no internet cafes open in our village, so i went out though somehow it might be dangerous for me, then, i found an internet cafe open. i rent a pc, first, i tried to go to download mode, so some drivers will be installed, but it kept showing "unkown device recognized" bla bla.. still.. i didnt lose hope. so i searched on google, and i found this site > http://suzhipackz.blogspot.com/2012/07/how-to-re-stock-samsung-galaxy-tab.html , when i finished downloading odin, i opened it to check whether it will read my device or not, first three attempts, it did not. so, i thought of downloading samsung kies so the drivers will be installed (safest way really to install samsung drivers), then i still looked for a smaller file (while waiting for kies to complete its download), then i found that there is a smaller zip file for you to install samsung drivers (see attachment below), i installed it, but still odin cant detect my device (try it, might be just on the pc i rented), so i just waited for kies to complete.. after a couple of minutes, successfully downloaded kies, and installed it. i tried connecting tab to pc with odin opened, i rebooted to download mode again and reconnect tab to pc, and voila! odin read my device! so, since pc has already detected my device, i just waited about 1 1/2 hours for the rom and the pit file and the db data file.... after almost 2 and half hours of crossing fingers, i have revived my tab and restocked it to gingebread 2.3!
HOW TO RESTOCK SAMSUNG GALAXY TAB p1000 to 2.3.3 GINGER BREAD STOCK ROM?
HERE:
- ALL REQUIREMENTS
.......Samsung KIES > LINK FOR SAMSUNG KIES
.......ODIN3 v1.7 > LINK FOR ODIN3 v1.7
.......p1000xxjq1_p1000xxjq1_p1000xxjpz < THIS IS STOCK ROM > LINK FOR STOCK ROM
.......gt-p1000_mr_PIT > LINK FOR PIT
.......dbdata.zip > LINK FOR DBDATA
.......place it all in ONE FOLDER in desktop "unzip it all"
PLEASE DOWNLOAD ALL OF THIS BEFORE YOU CONTINUE..............
PROCEDURE:
.......Turn off tab
.......open ODIN3 v1.7
.......click on the PDA and select - p1000xxjq1_p1000xxjq1_p1000xxjpz in your computer
.......clink on the PIT and select - gt-p1000_mr_PIT
.......Check only RE-PARTITION, "uncheck auto reboot and f.reset time"
.......in your tab press and hold "VOLUME DOWN AND POWER BUTTON"
.......if DOWNLOADING APPEAR leave it like that
.......now, connect you tab in computer
.......if ODIN detects your phone PRESS START in ODIN
.......wait for it until success, after that disconnect your tab
(if for an instance it stuck on downloading mode but you have already finished flashing, do not worry, you just have to manually hold the power button for it to boot up, it might get into recovery, so please reboot the system (it might also be a touch recovery so please tab the home touch key to continue) then if it keeps on booting on "samsung", do not worry, you are not done yet with the restocking procedure, so please proceed to the next step)
.......press and hold power button until it will turn off
.......open ODIN3 v1.7 again
.......UNCHECK it all "re-partition, auto reboot, f.reset time"
.......click on the PDA and select dbdata.zip
.......press and hold "VOLUME DOWN AND POWER BUTTON" again
.......if DOWNLOADING APPEAR leave it like that
.......now, connect your tab again
.......if ODIN detects your phone PRESS START in ODIN
.......wait for it until success, after that disconnect your tab
(again, if it is stuck on downloading mode but you have successfully done the flashing, hold power key to turn the tab on, and if it keeps on booting to "samsung" again, do the next step)
.......This time we will go to CLOCKWORKMOD by holding "VOLUME UP and POWER BUTTON"
(then wipe data, and wipe cache, (volume keys to scroll up or down, and home touch key to select) and reboot system, wait for a minute or two and home screen will now appear)
.........................................NOW YOUR IN STOCK ROM AGAIN 2.3.3 GINGER BREAD
another note : when there is an error for example that flashed on your tab screen like a color red "E:\ " something like that, do not worry, it is the external sd card (i dont have one so it was an error then but not a problem, no worries) just let it be, wait until it finishes
some files are already attached below coz they are just small in size
clicking "thanks" button is enough for me..
just sharing this with you guys...
happy restocking!! :laugh:
Update Prob
mastersymvts said:
I want get full file samsung tab p1000. For flash my tab.. Tq
Click to expand...
Click to collapse
Hi Guys is crashed my tab.
i get it functional with the stock rom 2.3.6
P1000XXJPZ
Kernel 2.6.35.7
[email protected]#2
Build gingerbread.XWJQ8
i wantetd to Flash to a newer rom but noting worked any ideas?
I modified a couple years ago the tab to include the sd space as System space. I do Not rember how i did this....?
If i get throught the stock partion all would be find but i couldn´t.
Regular mod Installation doesnt work, rooting also isn´t possible ...
readin with Heimdall shows this message
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
I hope you guys have any ideas.
Greets
P1000XXJQ1_P1000XXJQ1_P1000XXJPZ.zip do you stil have this?
Hotfile is down
Stock Rom's Link doesn't work
So, I tried your recipe and it worked pretty well for me, but the annoying thing about it was the links to the Stock Rom, so i got the below link as a mirror for those who are interested.
p1000xxjq1_p1000xxjq1_p1000xxjpz < THIS IS STOCK ROM >h-t-t-p-:-/-/-f-i-l-e-s-c-r-o-p-t-u-b-e-.-c-o-m/file/7806957-p1000xxjq1-rar
Couldn't find the given URL
LeMasoud said:
So, I tried your recipe and it worked pretty well for me, but the annoying thing about it was the links to the Stock Rom, so i got the below link as a mirror for those who are interested.
p1000xxjq1_p1000xxjq1_p1000xxjpz < THIS IS STOCK ROM >h-t-t-p-:-/-/-f-i-l-e-s-c-r-o-p-t-u-b-e-.-c-o-m/file/7806957-p1000xxjq1-rar
Click to expand...
Click to collapse
I couldn't locate the file.
need new links. prefer putlocker/mediafire etc.
THKS a Lot!!!!
Great!! many thanks my p1000 have a second life
http://www.4shared.com/get/B-DeOju6/P1000XXJQ1.html here you go its a miracle what using google could do using the right search methods if you would thanks i would really apreciete it guys and gals.
I just flashed my tab stock 2.3.6 from cm11 using odin. But stuck in bootloop. After going to recovery i get error message (red) as in pic. Where did i go wrong?
Thank you for this and sorry for reviving an old thread. It sucks when links go dead (or offer that sketchy ilivid crap). Here is a mirror:
Mirror for samsung galaxy tab P1000 stock odin TAR: stock-P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar
https://mega.co.nz/#!7wohlbKT!i3K7lvIfombRdJEzUUP-fiIZQS1qeStOr16tty-T86w
And a mirror to download ODIN 3 v 1.85: odin3-v1.85.zip
https://mega.co.nz/#!W553iL7B!vZTVktUwwg35a_glWGgBEaIDg11JVgkvFZ94mpzECas
2.3...
I think that there was a couple of kernel and Android security flaws in Linux 2.6, not fixed by Samsung Electronics Co. Ltd..
Samsung Tab P1000 stuck in nowhere!
First of all thanks the OP for the brilliant post on how to re-stock GB on P1000.
Earlier today I was fooling around with my P1000 to update it from CM11 to Omnirom 5.0.2, troubles started there. I was trying to install the TWRP recovery over CWM, and that is when all hell broke loose.
1. P1000 couldn't mount my internal SD. The tab was perfectly booting to a previous version of JB CM sapir, which I don't have any clue appeared where from. The storage showed the 2 GB internal memory, but the 12GB internal SD was missing out.
And the CWM errors were E:/can't mound internal SD
2. Now, after wiping data, dalvik, battery stats, formatting and all that, the tab doesn't even boot into the OS. The moment the power button is on, CWM initiates a count down saying, trying to mount SD, but unable to do so. After 20 seconds, the tab starts this whole process again, and thus a loop.
3. I tried to re-stock to GB; but my tab isn't being detected by Odin in download mode. Odin detects the tab when it is turned on and when the tab is on countdown-restart-countdown loop; but not in download mode.
I am a total noob, and I don't want to throw my tab away as I am a student and can't afford to get a new one Someone please help me to fix the issue. Thanks in advance!
PolaritySwitch said:
First of all thanks the OP for the brilliant post on how to re-stock GB on P1000.
Earlier today I was fooling around with my P1000 to update it from CM11 to Omnirom 5.0.2, troubles started there. I was trying to install the TWRP recovery over CWM, and that is when all hell broke loose.
1. P1000 couldn't mount my internal SD. The tab was perfectly booting to a previous version of JB CM sapir, which I don't have any clue appeared where from. The storage showed the 2 GB internal memory, but the 12GB internal SD was missing out.
And the CWM errors were E:/can't mound internal SD
2. Now, after wiping data, dalvik, battery stats, formatting and all that, the tab doesn't even boot into the OS. The moment the power button is on, CWM initiates a count down saying, trying to mount SD, but unable to do so. After 20 seconds, the tab starts this whole process again, and thus a loop.
3. I tried to re-stock to GB; but my tab isn't being detected by Odin in download mode. Odin detects the tab when it is turned on and when the tab is on countdown-restart-countdown loop; but not in download mode.
I am a total noob, and I don't want to throw my tab away as I am a student and can't afford to get a new one Someone please help me to fix the issue. Thanks in advance!
Click to expand...
Click to collapse
Can you flash at least the PIT in countdown mode(after you flashed the PIT, it goes to download mode)
Flash during countdown...
black_blob said:
Can you flash at least the PIT in countdown mode(after you flashed the PIT, it goes to download mode)
Click to expand...
Click to collapse
Thank you! I tried doing that. On the success/failure counter on Odin, it shows as a failure
PolaritySwitch said:
Thank you! I tried doing that. On the success/failure counter on Odin, it shows as a failure
Click to expand...
Click to collapse
Can you try booting the Vol- or the Vol+ button until you see the flashscreen?
Weird.(and making the tablet unbrickable needs a mod which I hope that you don't do)
black_blob said:
Can you flash at least the PIT in countdown mode(after you flashed the PIT, it goes to download mode)
Click to expand...
Click to collapse
black_blob said:
Can you try booting the Vol- or the Vol+ button until you see the flashscreen?
Weird.(and making the tablet unbrickable needs a mod which I hope that you don't do)
Click to expand...
Click to collapse
Well yes, Vol+ takes me to CWM recovery and Vol- takes me to download mode. Odin detects my Tab on CWM; I tried flashing the PIT which resulted in a failure. And on the download mode as I mentioned earlier, Odin doesn't detect my Tab
Well, I am all ears about the mod you're mentioning about, but let's just hope for now that I don't need that
PolaritySwitch said:
Well yes, Vol+ takes me to CWM recovery and Vol- takes me to download mode. Odin detects my Tab on CWM; I tried flashing the PIT which resulted in a failure. And on the download mode as I mentioned earlier, Odin doesn't detect my Tab
Well, I am all ears about the mod you're mentioning about, but let's just hope for now that I don't need that
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1312391
very Helpful
you Saved my life ... thank you veeeeeeeery much
Thanks for sharing this method. I quiet had a problem with the drivers and the link for them isn't available but I got a way to fix it. Thanks anyways.
Can you guys help me out with my p1000 tab too its bootlooped its in a stock recover and unrooted . I tried wiping data but nothing happens
thank you soo much
I'm not sure what type of "bricked" this would be but, I tried to flash my Canadian Fido S4 I337m with a MF3 modem. I did this through Odin Mobile Pro. At first it was all good, it started to restart with a blue android figure. It started to take a really long time and nothing was happening so I decided to turn the phone off. Now the phone won't turn back on and it won't connect to the PC. I have my backup saved on my sd card but I can't get the phone to load at all.
It's currently stuck the battery charging power up screen. I can't post a picture since I haven't posted 10 times apparently... So it's the grey battery icon, the circle in the middle isn't moving whatsoever.
Did a battery pull, tried starting it in safe mode, and tried to restart it in the download mode. All of which have failed.
Any advice would be helpful.
Thanks
*Update*
The blue android figure is back. Does anyone have any information on how long this little android guy is supposed to be around for?
benjiyap said:
I'm not sure what type of "bricked" this would be but, I tried to flash my Canadian Fido S4 I337m with a MF3 modem. I did this through Odin Mobile Pro. At first it was all good, it started to restart with a blue android figure. It started to take a really long time and nothing was happening so I decided to turn the phone off. Now the phone won't turn back on and it won't connect to the PC. I have my backup saved on my sd card but I can't get the phone to load at all.
It's currently stuck the battery charging power up screen. I can't post a picture since I haven't posted 10 times apparently... So it's the grey battery icon, the circle in the middle isn't moving whatsoever.
Did a battery pull, tried starting it in safe mode, and tried to restart it in the download mode. All of which have failed.
Any advice would be helpful.
Thanks
*Update*
The blue android figure is back. Does anyone have any information on how long this little android guy is supposed to be around for?
Click to expand...
Click to collapse
Download Odin 3.07 for the PC.... you flashed the wrong mode... I believe you flashed a US modem not a Canadian on... suggest NC1 can be found in the forum...
With the phone unplugged, press volume down +home+power if you get a warning, release buttons and press voulme up to go to download mode...
Start Odin.... important... take off auto reboot....
there are instructions on how to properly flash the modem... likely in the same thread you found the file.....
Flash only the modem.bin file inside the folder... do not flash the nonhalos file....
Most instructions sau flash once... reboot to download mode.. flash again....
Basically let me know if you can get to download mode... I tried to google blue android on screen but didn't find anything yet... first I have heard of blue... I have seen green dead ones though....
Gage_Hero said:
Download Odin 3.07 for the PC.... you flashed the wrong mode... I believe you flashed a US modem not a Canadian on... suggest NC1 can be found in the forum...
With the phone unplugged, press volume down +home+power if you get a warning, release buttons and press voulme up to go to download mode...
Start Odin.... important... take off auto reboot....
there are instructions on how to properly flash the modem... likely in the same thread you found the file.....
Flash only the modem.bin file inside the folder... do not flash the nonhalos file....
Most instructions sau flash once... reboot to download mode.. flash again....
Basically let me know if you can get to download mode... I tried to google blue android on screen but didn't find anything yet... first I have heard of blue... I have seen green dead ones though....
Click to expand...
Click to collapse
No, I can't seem to get into download mode. It just keeps heading on to the the blue android. I purchased a dongle jig to get it to download mode on ebay hoping that would work.
Method 1 Odin Mobile
Extract TAR and place modem.bin on Internal or External SD Card
Open mobile Odin (free version works but pro is awesome)
Select modem 2 and find extracted bin file
Press flash firmware button
System will boot to download
Hold power button for 10 seconds if download mode in green comes up.( should be blue)
Odin will install modem files
Done
This is what I was following. It said if it comes up as a blue android it's good.
benjiyap said:
No, I can't seem to get into download mode. It just keeps heading on to the the blue android. I purchased a dongle jig to get it to download mode on ebay hoping that would work.
Method 1 Odin Mobile
Extract TAR and place modem.bin on Internal or External SD Card
Open mobile Odin (free version works but pro is awesome)
Select modem 2 and find extracted bin file
Press flash firmware button
System will boot to download
Hold power button for 10 seconds if download mode in green comes up.( should be blue)
Odin will install modem files
Done
This is what I was following. It said if it comes up as a blue android it's good.
Click to expand...
Click to collapse
If you put the modem file on an external sd card.... maybe you could pull the card, put it in a usb reader and put the proper modem.bin file on the card and put it back in the phone and power it up.... see what happens. I am guessing it couldn't finish the process because you have the wrong modem file...... Okay so now I realize you are stuck on the mobile odin logo... (blue guy) search google for how to get out of that or go to the mobile odin thread and ask chainfire... it is his app....
I've got the problem fixed. I re-flashed my whole firmware and managed to get the phone into download mode using a USB Jig. This is for reference if anyone encounters the same problem in the near future.
Thanks for the help and advice though.
I was about to sell my rooted Note 4, and I did a "reset phone" in the settings menu to wipe the data out , so I can sell it. When the phone turned back I saw on the top left a blue "recovery mode" message and the next is my phone black, and on the middle of the screen appear every 5-8 sec a green android logo with "Installing System update" but just for a second, and goes back to black.
And again, and again...
What a hell happened?I am stuck.. I tried to take the battery out , waited and put it back, than I was holding the volume up+home+power on bottoms to get a recovery mode menu, but it does the same "flashing" screen thing.. Please help me I have a buyer for this phone , really need to fix it!
atti_mac said:
I was about to sell my rooted Note 4, and I did a "reset phone" in the settings menu to wipe the data out , so I can sell it. When the phone turned back I saw on the top left a blue "recovery mode" message and the next is my phone black, and on the middle of the screen appear every 5-8 sec a green android logo with "Installing System update" but just for a second, and goes back to black.
And again, and again...
What a hell happened?I am stuck.. I tried to take the battery out , waited and put it back, than I was holding the volume up+home+power on bottoms to get a recovery mode menu, but it does the same "flashing" screen thing.. Please help me I have a buyer for this phone , really need to fix it!
Click to expand...
Click to collapse
Download firmware for your model from www.sammobiles.com extract firmware file ,take your phone in download mode by pressing volume down+home+power .you will see warning screen then press volume up.download odin tool for pc and samsung usb drivers for note 4 then open odin press Ap in odin and select firmware file and hit start,wait until odin pass .and your device will be good to go.
Trex888 said:
Download firmware for your model from www.sammobiles.com extract firmware file ,take your phone in download mode by pressing volume down+home+power .you will see warning screen then press volume up.download odin tool for pc and samsung usb drivers for note 4 then open odin press Ap in odin and select firmware file and hit start,wait until odin pass .and your device will be good to go.
Click to expand...
Click to collapse
The sammobiles website down for maintenence this weekend , great.....
atti_mac said:
The sammobiles website down for maintenence this weekend , great.....
Click to expand...
Click to collapse
Tell me your model and I'll provide you a link to download firmware
Trex888 said:
Tell me your model and I'll provide you a link to download firmware
Click to expand...
Click to collapse
SM-N910T
Will be unlocked after this upload?
Thank you so much, can't wait
If Sammobile is down, you can find lots of Samsung firmwares even for SM-N910T on www.updato.com. Hope this helps.
atti_mac said:
SM-N910T
Will be unlocked after this upload?
Thank you so much, can't wait
Click to expand...
Click to collapse
To be honest i donno about unlocking but here is the link to download firmware
https://www.androidfilehost.com/?fid=24665509702140550
Trex888 said:
To be honest i donno about unlocking but here is the link to download firmware
https://www.androidfilehost.com/?fid=24665509702140550
Click to expand...
Click to collapse
I downloaded from there , opened a zip file copied to a folder. Took the phone in download mode, Opened Odin, clicked on AP and got the file to point ( not a zip file anymore) and hit start.
My phone shows downloading, and like a line started from the left (light blue , but only very short, and doesn't move anymore.
The pc's latest log shows ID:0/003> NON-HLOS.bin
So is it stopped ? the phone said don't turn off target, i don't want to brick it so what to do?
I had no choice i unplug it, and took out the battery, still not brick I started all over again, and now the latest log is : boot.img but the line still not moving...
binary size shows : 3793.1 mb
Update , 2nd time it was moving further.. passed boot, recovery.img, latest log : system.img.ext4. the blue line moved 1/2" and it is stopped again. I don't know what to do...
I am using Odin 3 V3.12
Try odin 3.10 and use pit file with firmware it will repartation your device and hopefully it ahould fix here is the link for pit file
https://mega.nz/#!yE0QkRgR!8DvGvAauRkb-2xmtH_3ZluoYwCvqNaaSOnXMLYB_CAI
Select AP for firmware and PIT for pit file and hit start
Trex888 said:
Try odin 3.10 and use pit file with firmware it will repartation your device and hopefully it ahould fix here is the link for pit file
https://mega.nz/#!yE0QkRgR!8DvGvAauRkb-2xmtH_3ZluoYwCvqNaaSOnXMLYB_CAI
Select AP for firmware and PIT for pit file and hit start
Click to expand...
Click to collapse
Same thing, is it possible the md5 file is not the right one?
Update, I downloaded a different file from the www.updato.com. website , and it is already passed that point when was stuck before. Cross fingers.
atti_mac said:
Same thing, is it possible the md5 file is not the right one?
Update, I downloaded a different file from that other website you guys mentioned, and it is already passed that point when was stuck before. Cross fingers.
Click to expand...
Click to collapse
No the firmware file is correct qnd i have tested it. What is exatly happening while you flash firmware?
Ok, i used that 2nd file, and was everything perfect! I got a message on Odin : "PASS" the phone turned on, passed a Samsung logo, the T-Mobile screen turned on, and the T mobile song, and stuck on that screen....
this is a file I used a second time , and I stuck now at boot by the T-Mobile logo
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME.tar.md5
and this file was the one stuck always at the beginning :
N910TUVS2EPG2_N910TTMB2EPG2_N910TUVS2EPG2_HOME.tarmd5
just a note, my Note 4 was rooted and It wasn't a latest firmware , actually probably like 8 months old or at least 6 month old firmware on it.
WORKING!! 100% Working. I just took out a battery , and was waiting a bit, turned it back and working! Thank You guys!!
you shoud have clear cache and data through recovery after that successful flash..
but you didn't
atti_mac said:
Ok, i used that 2nd file, and was everything perfect! I got a message on Odin : "PASS" the phone turned on, passed a Samsung logo, the T-Mobile screen turned on, and the T mobile song, and stuck on that screen....
this is a file I used a second time , and I stuck now at boot by the T-Mobile logo
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME.tar.md5
and this file was the one stuck always at the beginning :
N910TUVS2EPG2_N910TTMB2EPG2_N910TUVS2EPG2_HOME.tarmd5
just a note, my Note 4 was rooted and It wasn't a latest firmware , actually probably like 8 months old or at least 6 month old firmware on it.
WORKING!! 100% Working. I just took out a battery , and was waiting a bit, turned it back and working! Thank You guys!!
Click to expand...
Click to collapse
Wipr cache and make factory reset in recovery to get clean system firmware.
Hello everyone,
My m30s is bricked as well. The phone got off suddenly while operating youtube (A couple of apps were running in the background).
Phone was running Android 11 oneUi 3
I couldn't boot into recovery mode by pressing Power + Volume up button. Didn't work. Then read somewhere on XDA to press volume up and down together and enter download mode by connecting cable to pc.. I did that and successfully flashed the official Samsung firmware using Odin. Phone is still stuck on the Boot Samsung logo - powered by Android upon rebooting after Odin successful flash. I tried even entering recovery mode from download mode by pressing power+ volume down , releasing volume down after reboot and then pressing volume up for 2-3 seconds. I'm just not able to get to recovery mode at all. I just don't know what else to do now. Can someone please help me out.
Try flash Samsung stock ROM again but with repartition ticked in Odin options.
LR7875 said:
Try flash Samsung stock ROM again but with repartition ticked in Odin options.
Click to expand...
Click to collapse
Sure. ill try that right away. Will post the results in next 10 mins.
@LR875 ,
I tired the above, it fails saying, Set PIT File, Cant open the specified file.
Is it a 5 part firmware with files AP BL HOME_CSC CSC PIT?
If not then download at www.samfw.com
LR7875 said:
Is it a 5 part firmware with files AP BL HOME_CSC CSC PIT?
If not then download at www.samfw.com
Click to expand...
Click to collapse
AP,BL, CP, CSC, Home_CSC
PIT has to be there as well ?
lineofsight9865 said:
AP,BL, CP, CSC, Home_CSC
PIT has to be there as well ?
Click to expand...
Click to collapse
Hi bro,
Kindly clarify please, my firmware files only has the above listed. No PIT file separately. Im downloading as you suggested.
Hello. The new firmware files contain the following 5 files - AP, CP, BL , CSC , HOME_CSC
Well also flash it but as you don't have tge pit file, maybe try fimding on web
Hi bro. Pit file is to be flashed how ? There is no option in odin to add that file.
Isn't there a PIT button?
Hi. Just now in the process of flashing. Found the pit button and file. Lets hope this works. Will post results once flashing done.
Hi. Flashing done successfully. Restarted automatically , now again it's not going past the Samsung logo - powered by Android screen.
Well might be hardware problem sadly
You sure of this ? Which area most likely ?
If that is the case, EMMC storage chip (Samsung was infamous of that with their S3 sudden death syndrome).
Well even if you have only software issue, something is blocking you from installing stock rom and as you does not have OEM unlocked,you can it flash a custom rom, so it is bad.
Ok.btw phone does not switch on while pressing only power button and volume down button or simply even power button. Happened yesterday as well. I have to put it to charge for a while and then again after an hour or so it automatically starts with a vibration and gets stuck on the Samsung boot logo - powered by Android. Any clue here whats happening ?
lineofsight9865 said:
Ok.btw phone does not switch on while pressing only power button and volume down button or simply even power button. Happened yesterday as well. I have to put it to charge for a while and then again after an hour or so it automatically starts with a vibration and gets stuck on the Samsung boot logo - powered by Android. Any clue here whats happening ?
Click to expand...
Click to collapse
As a last resort replace the battery.
Hi. I opened the back panel. Heated the cpu for a while. It started, went to the single samsung logo screen and then restarted and went back to the boot logo. For a while android had loaded something with a loading screen indicator as well. Now back to square one.
Well you heated the CPU? Try slightly pressing on it while heated