no flashlite in jm1, which version does contain flash?
hiraj_panosian said:
no flashlite in jm1, which version does contain flash?
Click to expand...
Click to collapse
Have you enabled plugins in the browser?
yes, I did, but jm2 does contain flash 9
The jm2 Version over Kies is for brandet SGS only, or isn't it. As far i know Flash comes with Froyo.
Sent from my GT-I9000 using XDA App
froyo jp3 also has flash but it doesnt work
reinstalling flash 10.1 over it fixes it
Froyo JP3 has problems with the clock its behind for 3 minutes per day..
hiraj_panosian said:
Froyo JP3 has problems with the clock its behind for 3 minutes per day..
Click to expand...
Click to collapse
i read that twice, i guess. mine auto corect with yhr gsm network because ive no issue
Sent from my GT-I9000 using XDA App
JM5 has Flash Lite. It's pretty crap though, mostly useless except for banner ads.
good news, the new jm1 does contain flash
I just tested it and it is !!!
It's samsung's way to give little pieces to us who are mad about the gps
Thanks for the info, I tought it was froyo only.
weee, all sites work
Wait, I found a site that dosen't work ? Isn't this flash 10 ?
blah.
Back to complaining about gps.
no its flash 9
go to whatismyflash.com
Related
I just noticed that upgrading throuh reg hack on Kies makes the phone run smoother than the same firmware while upgrading on Odin.
I don't know if this has to do with using one file in Odin however just wanted to share.
Sent from my GT-I9000 using XDA App
Is it the same file or two different files .
Kies your official network firmware Odin presume you are using a stock non provider file .
jje
Is JPY officially available on Kies?
sonci said:
I just noticed that upgrading throuh reg hack on Kies makes the phone run smoother than the same firmware while upgrading on Odin.
I don't know if this has to do with using one file in Odin however just wanted to share.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
How did you determine this? Might just be a placebo effect or related to something else you did / didn't do (e.g. factory reset / cache wipe).
ragin said:
Is JPY officially available on Kies?
Click to expand...
Click to collapse
Yes. I flashed to it last night. I downgraded via odin back to 2.1. Downloaded kies 2.0 and it came up with JPY firmware. So far so good, GPS is meh, didnt use it enough today though. Ive never had GPS issues previously, through either official 2.1 roms or non official 2.2 roms. Ill test more 2 moro
This is pure bs as usual. When u install a new f/w benchmarks always run slightly faster till u get memory filled up with installed programs.
Sent from my GT-I9000 using Tapatalk
I don't care about benchmarks. I was speaking of generally using the phone.
The phone is smoother, there is no more lag. There was always lag before even with no programs installed.
However it can be placebo,
I also noticed that after flashing some kernel (for going back to 2e recovery) immediately reappears the lag
The stock 2.2.1 is also smoother to me than Darky rom, however they equal after applying lagfix on Darky.
lgkahn said:
This is pure bs as usual. When u install a new f/w benchmarks always run slightly faster till u get memory filled up with installed programs.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Hello
i just updated my galaxy s to the leaked 2.3.3 build from a danish 2.2.1 build i tryed reflashing it since i had problems with no data connection and errors in phone part ( though it worked, just a bit buggy) the reflash and repartion that i choose to do since i had voodoo kennel on my phone before did not help either, so now my phone cant use data connection
anyone have any suggestions? maybe it is a common error? i tryed googling and looking a bit but did not see anything.
I really appreciate the help, another thing i would love would be a 2.3.3 build with danish keyboard/speech in it.
Are you saying that you flashed to a phone that was lagfixed .
If so its broke your phone Undo lagfix before flash is rule one .
You will need to flash stock rom using Odin to get a working phone .
jje
Okay but i flashed the version that was out in the forum with Odin, what Rom should i flash to get back to a state where i can flash 2.3.3 with Odin again? and will i need to re partion, i kinda thought that would take care of the laggfix?
I'm not sure what your problem is. Just take the files from the JVK Rom (PDA, Modem, CSC) add a pit file (512.pit or what you want) and select repartition and click start. Don't need to disable lagfix if you do it that way.
Sent from my GT-I9000 using XDA App
Hmm okay the thing is i already did exactly that and still no data connection :S
Maybe i need to flash a kennel without laggfix?
I have now flashed samsung stock kennel for 3.3.3 , i have reflashed 2.2.1 the version i get from my kies in Denmark and everything works in 2.2.1, now i tryed reflashing 2.3.3 and i still got the same problem as before any help would be much appreciated
Sounds like you need to put in your telco specific APN to get data working.
Sent from my GT-I9000 using XDA App
Change the phone part and put the jv1 modem
darkstar2k77 said:
Sounds like you need to put in your telco specific APN to get data working.
+1
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
okay sounds like something that might work, where can i find this apn?
where do i find this file?
It's not a file, it's the name/details of a server on your provider's network. If you didn't back up your original firmware, you'll probably have to call your network or check their website.
Word to the wise - reposting the same question after 7 minutes won't win you too many friends
Danish 2.3.3 keyboard - best to wait until the Nordic firmware is released/leaked.
Thanks the VPN from my network provider solved it!
btw i did not repost any question it was not the same question and i only posted course i was still in doubt.
again thank you all, properly never would have throught of VPN Settings by myself
No problem, glad you sorted it out.
Seen lots of posts by members having problems after flashing using the wrong version of odin for their phone.
Please beware odin versions are device specific and using the wrong software to flash your phone is dangerous. Make sure you get the right one.
http://www.samfirmware.com/WEBPROTECT-programandroid.htm
Sent from my GTI9000 using XDA App, gingerbread 2.3.3 jvh rooted, ADW launcher + gingerbread theme
i always use odin 1.3. so far so good.
i have always used odin 1.7 (not knowing i shouldnt)
but never had any issues so far.... i prefer it over the other versions
if u are not using window 7 then should be no problem.
ic3joker said:
i always use odin 1.3. so far so good.
Click to expand...
Click to collapse
Same here, no problems so far. Win 7 (64)
I am going to suggest that a reading of the post gives not what the OP claims but a upgrade order for Odin versions . Samsung are hardly likely to give multiple versions of Odin to tech repair .
needs a tech repair guy to put us straight i use Odin 1.3 on SGS1 and SGS 2
jje
ic3joker said:
i always use odin 1.3. so far so good.
Click to expand...
Click to collapse
same, work as it should.
I have been using 1.8. Whew
I use 1.85 and no problems at all....odin versions are all the same....
Sent from my SGS with Simply 3.3 FINAL ROM
simone201 said:
I use 1.85 and no problems at all....odin versions are all the same....
Sent from my SGS with Simply 3.3 FINAL ROM
Click to expand...
Click to collapse
Me too, didn't know that it's device specific.
They are retrocompatible....the latest is compatible with all galaxy s series....
Sent from my SGS with Simply 3.3 FINAL ROM
Hi guys. I saw on samfirmware that stock ROM CSC: I9000XENJV4 is available for download. I'm guessing this is Netherlands official GB 2.3.3 stock rom. Unfortunately if I open Kies to update my phone it says that I'm using the latest firmware (2.2.1 CSC = I9000XENJS3; I9000XWJS5).
Has anyone managed to update to GB directly using Kies to this version?
Thank you in advance for your answers.
I think I9000XENJV4 is only available on samfirmware at the moment. I'm also on 2.2.x and kies doesn't show updates.
Samfirmware was wrong, see his tweet some moments later:
@SamFirmware Update KIES for Netherlands not online yet. Galaxy S.
Samfirmware shows firmware-files - i just flashed my SGS with the xen-firmware and it works like a charm... So the update may not be available through KIES but the firmware files are available from SamFirmware.com
I do not understand this Samsung policy..why Nordic countries got it months before....testing purposes or what??
Sent from my GT-I9000 using XDA App
I guess so. I used the Nordic version a long time
Thank you very much for your answers. I thought it is something wrong with my phone or kies since I cannot find for that specific CSC. In this case I'll be waiting a little bit more. Anyhow, it's weird that XEN firmware isn't out for gingerbread since NEE is out for more than one month.
Now available by kies I9000XWJVH/I9000XENJV4/I9000XXJVO/I9000XWJVH
lownoise said:
Now available by kies I9000XWJVH/I9000XENJV4/I9000XXJVO/I9000XWJVH
Click to expand...
Click to collapse
indeed, got that too through kies...at last!
Me too. It was finally available. Now i'm checking the forum on root
Sent from my GT-I9000 using XDA Premium App
Any news on the best root method?
Sent from my GT-I9000 using XDA App
Use the Voodoo kernel to root
Sent from my GT-I9000 using XDA Premium App
Is there somthing more simple like a one click, i dont want to use odin.
Sent from my GT-I9000 using XDA App
Is there any way to know what are T9 and swype languages in this rom without having to flash it?
Or any other rom for that matter?
Startup sound is not smooth on my phone but interrupted. Same with voice announcements in the Osmand navigation program. MP3s play fine though.
Had some problems with widgets. Songbird needed readding the widget after program restart.
Jorte calandar had its widget not showing. After updating some fight to get it to work with the Google calendar, but that was not 2.3.3/JVH's fault.
I'm on GT-9000 / 2.3.3 stock /I9000XXJVO/GINGERBREAD.XWJVH/ stock kernel at the moment still as well.
Used the last voodoo before on Froyo but I'm not too keen on flashing anything right now right away to root again. I'd love to get voodoo on it again (mainly because of the audio features and obviously the lagfix) however the latest voodoo kernel for gingerbread on JVH stll seems to be based on older sources then the one samsung just released from what i've read.
As soon as there is a stable Voodoo (without the word "hack" in it) for JVH, i'm flashing
At least I have 3 button combo's now working after updating to the 2.3.3 XWJVH XEN. They didn't work for me before!
jutezak said:
At least I have 3 button combo's now working after updating to the 2.3.3 XWJVH XEN. They didn't work for me before!
Click to expand...
Click to collapse
Hang on that is interesting!!
Mine worked before and still do, but a friend of mine has one that didn't have the 3 button combo so im interested to see what'll happen there.
Dit yours never work or did they stop working after a custom rom?
3 button combo indeed start working after this update
I just checked mine, after reading the thread and yes I can confirm mine never worked before but after this update to 2.3.3,it started working.
That's nice.
GreenSGS said:
I just checked mine, after reading the thread and yes I can confirm mine never worked before but after this update to 2.3.3,it started working.
That's nice.
Click to expand...
Click to collapse
That's because the gingerbread update contains the SBL (Secondary Boot Loader).
The sbl is responsible for the 3-button combo.
Sent from my GT-I9000 running Gingerbread using Tapatalk
What is new/different in this build? The only things I have noticed is the perpetual scrolling and blue end of page buffers. There must be more than that surely?
R u getting jvt via kies?
Sent from my GT-I9000 using Tapatalk
Yes upgraded a couple of hours ago
What country?
Sent from my GT-I9000 using XDA App
eloisant said:
What country?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Europe (XEU) Yayy JVT is official GB!
Tehpriest said:
What is new/different in this build? The only things I have noticed is the perpetual scrolling and blue end of page buffers. There must be more than that surely?
Click to expand...
Click to collapse
The only other thing I've noticed is social media integration with contacts. Details from Facebook, Twitter, Linked, Skype etc no longer show as unknown but are correctly identified.
Well, dint expected for quick official release of 2.3.5. Anyway, many of us had this long time ago.
still wifi dhcp bug is present???
currently i am on 2.3.4 JVR stock with semaphore 1.6, I don't want to take the risk as I only use wifi as my internet source
What about Phone FC in the leaked JVT, The official JVT it is said to be identical with the leaked JVT???
Wrong thread
Sent from my GT-I9100 using xda premium
I don't have any wifi dhcp bug but then I never had it before.
Can it be confirmed that the version released by KIES is the same as the leaked JVT?
I have seen some changes in the official release from the leaked...for example the overscroll in tw3 launcher and in the menu...at least i think so...
blue overscroll glow
It seems to be the same. Though I can't speak for specifics.
Sent from my GT-I9000 using XDA App
Just updated and now cannot conenct to mass storage.
On Kies connects at times. Uninstalled and reinstalled drivers. No use!
Have noticed that if you connect USB to charge the phone while it's OFF the phone will switch ON. Useless Idea.
Can someone please post the official Kies ROM? I want to get back on the official upgrade paths, as I'm passing my phone on.
I'm currently on JVS with XEU installed, but I can't see this update
black_math said:
Can someone please post the official Kies ROM? I want to get back on the official upgrade paths, as I'm passing my phone on.
I'm currently on JVS with XEU installed, but I can't see this update
Click to expand...
Click to collapse
I have JVT from the leak. Kies says its the current version. So that should be fine!
Weird, i just flash to JVT from the file RAMAD posted. When connected to kies it mentions this version of firmware cannot be updated.