Related
Not sure if this is the correct forum but I want to be able to turn of roaming completely. I have a US G1 on the three UK network with the US RC33 installed and root. I have disabled data roaming. Here in the UK we're too small a country to want to roam! Coverage is usually good enough from a single network. However, I occasionally get the little 'R' symbol on the single strength icon and an annoying prompt saying I need to turn data roaming on because I lost connectivity. I have to go into the settings and manually select the "3" network again.
What I want is to either be connected to three UK or not connected to anything at all. Is there a config file I can edit to allow this? Would the UK RC8 firmware do this for me?
Thanks in advance for any help.
Doesn't a 3-UK SIM try to roam onto O2 though?
You could set the phone WCDMA only and NOT roam onto a GSM network.
Use AnyCut to shorcut Activity: Phone Info
From there under preferred Network Type; set to "WCDMA Only"
HELP!! Roaming signal won't go away
I have an unlocked G1, JF1.41 v 1.1 and i just updated to the RC33...but this also happened when i had RC30 , v 1.0...
I put in my canadian Fido sim card and everything works fine but i have that little "R" on top of my signal strength bar...
I think this means its data roaming? if this is the case...it should be okay (even though its going to bother me) because my service provider says my EDGE/Data is disabled (i do not have a data plan, NOR do i wish to incur any data charges.. i'm fine with my free WIFI ) .
However, if this means im roaming on another network, i dont want to be incuring any long distance charges on my phone EVEN when im using my own FIDO network..
I went to settings - about phone - status, and here are my specs (some of them):
Network: Fido
Network Type: EDGE
Service state: In service
Roaming: Roaming
Data Access: Disconnected
i'm pretty much just concerned about the ROAMING part of it... my other friends with G1's are with rogers, don't have that little R..
how do i get rid of that?? please and thanks!
Try manually changing the network in Settings>Wireless controls>Mobile networks>Operator selection
G1, like all GSM phones, will roam onto networks specified on the SIM if it can get a better signal. As long as the relevant operator has a roaming agreement in place, there's nothing to be concerned about, other than the R symbol in the status bar.
Mod: move this over to General discussion please.
I did change it and selected my Fido network (it's the only network available).
Thanks. I've set it to WCDMA only so I'll see how it goes.
Please help??? i still have that little R on top!
After I got home I found my phone had lost its connection. It didn't seem to be searching for the network. I had to go into settings, search for networks and then select three again. Is there any way to control if the phone does a search for networks automatically?
Looks like it reconnects to three on its own after a while. I still get the annoying popup about turning on data roaming though
footboydog said:
Looks like it reconnects to three on its own after a while. I still get the annoying popup about turning on data roaming though
Click to expand...
Click to collapse
As has been previously mentioned, Three will "roam" onto another network if it goes out of Three's own 3G network coverage because Three does not run its own 2G network.
However, it isn't O2 anymore, it is Orange as of late 2006/2007. I *believe* that you won't be charged any more if you use data whilst "roaming" on Orange, so whilst you are in the UK it is quite safe to allow data roaming, but I would be inclined to check this with Three.
Regards,
Dave
hello,
after searching on "3G" in the forum, i seems that the problems are just the opposite to my question, they all want 3G to be turned off.
Now I want to connect to 3G (with the "G" icon on the staus bar).
My problem is that it always connect on "edge", with the "E" icon in status bar and when I want to make a video call, it always says that there is no connection to 3G so I can't make videocall.
Anyone knwos how to activate 3G?
I looked into the connections, but I don't want to mess in it without knowing what I do.
BTW I'm in Europe (Belgium).
Thanks
You fell into the same trap I did when I first got a Windows Mobile phone.
G means GPRS and is the lowest, simplest connection speed.
G = GPRS. "Normal" internet speed (9.6-14.4kbps)
E - Edge. "Enhanced" internet speed (normally 48kbps, but can be higher)
3G = 3G internet speed (128-384kbps). Also allows video calls.
H = HSDPA. "Mobile broadband" speed. (1.8Mbps, 3.6Mbps or 7.2Mbps depending on operator).
You'll want to go to:
Start > Settings > Connections > Advanced Network
Make sure that HSDPA/HSUPA is enabled
From then on, it depends on the signal in your area. If you find that you're having a problem getting and maintaining a 3G or H signal, you might need to get an updated SIM from your operator. I got a new SIM from O2-UK and it solved my connection problems immediately.
I see that HSDPA/HSUPA is enabled.
Could it have something to do with the settings in connections (instead of advanced network settings)?
I will also check with my provider (sim card)
Thanks for the reply
i cannot connect to the internet not using wifi. i do however h an H symbol next to my signal. i dont get why i have the hsdpa but cannot connect. i've tried anything i can think of.
*i can't turn data connection on in my comm manager, it automatically disconnects and says wap.cingular not working or gprs not working somthing like that.
*in the connection settings i pick media net wich is automatically picks att but still won't
*in settings/personal/phone i left if auto defualts for bands
*settings/connections/advance network i even tried to put it to hsda ONLY won't work
the only new lead im getting is this Zenith post saying he got new sim card so now it's working. that's all im getting at now. but im even skeptical about that
If you are not getting the 3G or H icon then you either have no coverage or an incompatible SIM.
If you can't connect to the internet you either have incorrect settings on your phone, or your network aren't allowing you on their APN.
Suggest in all cases phoning your network to get clarification.
artesea said:
If you are not getting the 3G or H icon then you either have no coverage or an incompatible SIM.
If you can't connect to the internet you either have incorrect settings on your phone, or your network aren't allowing you on their APN.
Suggest in all cases phoning your network to get clarification.
Click to expand...
Click to collapse
you wouldn't believe how i found out i had no internet. they say'd it was in the system but it was disabled in thier system. i put in my brothers sims and his work just fine. so i told them to look at whatever his plan is and they switch to what he had. anyways long story short i found out not my settings bc you just auto configure it connectin wizards, and wasn't sims card, it was stupid att. i was getting the H icon but not an H on my signal. anyways its all done now. thanks again guys
Hello everyone.
I've been using this Omnia 7 for awhile. But today I noticed that there was a triangle in the top bar. Based on my experience with Windows Mobile, I guessed that would be a roaming indication. When I looked up online, my guess was correct. However I am still confused, recently I haven't changed my carrier, location, cellar setting etc . The triangle just starts to show. It was never there before today. I am worrying it will bring extra cost on my bill. Could someone help me fix this problem.
Thank you very much
p.s
Carrier: Canada Fido
Omnia 7: unlocked, no brand logo at startup screen, no brand logo at the back
Cellar Setting: Don't Roaming, Data Connection is off, Network Selection is automatic(no difference if I change to other options), no apn
It could be that your provider is using another provider's network if the original one doesn't have reception.
It's like this with my provider "Three" in Austria. The 3G-Network is running on their own network and in areas, where they have no reception with 3G, then my phone uses the GSM network from a different provider and shows the roaming-icon. It shall be like that so it doesn't cost anything more.
Ask your provider if roaming is planned there.
i own a samsung galaxy s2 ordered from uk,
everything working fine except for this serious issue that i have been trying to resolve till now.
i have a monthly internet subscription from my carrier and it always been working fine on my iphone ( i mean here connecting through the 3g network ). but in the S2 .. i have to use Edge to be able to access the internet ( the mobile network mode must be set to GSM only ). whenever i switch the network mode to GSM\WCDMA auto , the 3g icon appears but when it tries to connect to internet, the phone automatically switch to Flight mode and i loose the network signal. and this happens all the time. till now i am only able to connect to the internet by switching the mobile network mode to GSM only which only uses Edge network .
i have tried every possible thing to resolve this issue but nothing worked for me. please help
What country are you in? What carrier are you on? What bands do they use?
location location location.
Where are you from?
And what frequency does operators in your region operate.
just curious, have you tried hard/factory reset?
i am from saudi arabia and i am using Mobily network.
mobily is using HSDPA network as well as Edge network.
i did a software reset and still the same issue.
phone information:
Baseband version I9100XXKDH
Kernel version 2.6.35.7--I9100XWKDD-CL161513
Build Number GINGERBREAD.XWKDD
crazy idea - is there any blocking going on in SA or with that carrier? Have you used another not carrier supplied smartphone successfully on that network?
I have been always using their 3g network on my iphone. And still there network only on edge connection on the s2. What i have noticed is that the saved apn sometimes shows up and sometimes disappears
omnia_owner said:
i own a samsung galaxy s2 ordered from uk,
everything working fine except for this serious issue that i have been trying to resolve till now.
i have a monthly internet subscription from my carrier and it always been working fine on my iphone ( i mean here connecting through the 3g network ). but in the S2 .. i have to use Edge to be able to access the internet ( the mobile network mode must be set to GSM only ). whenever i switch the network mode to GSM\WCDMA auto , the 3g icon appears but when it tries to connect to internet, the phone automatically switch to Flight mode and i loose the network signal. and this happens all the time. till now i am only able to connect to the internet by switching the mobile network mode to GSM only which only uses Edge network .
i have tried every possible thing to resolve this issue but nothing worked for me. please help
Click to expand...
Click to collapse
Hi, very similar issue here.
For this four days since I have got my GS2 everything was just fine. The data connection and 3G speed was great. Yesterday, all of the sudden all got crappy. Could not display any web pages. It starting to display page but after few seconds pop-up window appear which say "Data connectivity problem. The server failed to communicate. Try again later"
Interesting that my gmail, market, xda app working fine as normal.
I'm in Ireland on O2 now.
Baseband version I9100XXKDH
Kernel version 2.6.35.7--I9100XWKDD-CL161513
Build Number GINGERBREAD.XWKDD
Can someone help to solve the problem, please. Is it possible that something with the hardware is wrong? Broken?
I'll perform the factory reset and will let you know.
i just managed to flash my device with the latest EXE1 dated May 3.
and i am still facing the exact same problem.
omnia_owner said:
i just managed to flash my device with the latest EXE1 dated May 3.
and i am still facing the exact same problem.
Click to expand...
Click to collapse
Maybe we should ask for replacement...
I have same issue, and for Ihrrob, your other application are working fine because what i noticed on my mobile that 3G & 2G connection is there but not permenant that's why WIFI hotspot always disconnect and VOIP applications are not working.
Hassanalaa said:
I have same issue, and for Ihrrob, your other application are working fine because what i noticed on my mobile that 3G & 2G connection is there but not permenant that's why WIFI hotspot always disconnect and VOIP applications are not working.
Click to expand...
Click to collapse
You are right the 3G/2G connection is there but not permanent.
If I press the Internet icon the home page, which is 'Google' appears (sometimes) immediately. I think this is because the page is very light. If I try to open a regular page it loads 1/3 of the content or nothing.
i just hope it is a software bug not a hardware problem
Type on the dialpad *#*#4636#*#* and force the phone to HSDPA only on the dropdown menu. This is a hidden menu on the phone.
Isn't this carrier related?
amtrakcn said:
Isn't this carrier related?
Click to expand...
Click to collapse
Unfortunately not.
I have spoke to the rep in the store. They reset all settings for me but it didn't help.
Just to double check if he wasn't wrong I've put the sim card in to my N900 and all data worked fine.
Bad, bad...
omnia_owner said:
i am from saudi arabia and i am using Mobily network.
mobily is using HSDPA network as well as Edge network.
i did a software reset and still the same issue.
phone information:
Baseband version I9100XXKDH
Kernel version 2.6.35.7--I9100XWKDD-CL161513
Build Number GINGERBREAD.XWKDD
Click to expand...
Click to collapse
I'm on Mobily network in Riyadh, and 2G/3G is working fine for me. I stay on 2G most of the time to save battery, but have tested 3G and got around 3mbps.
I have the same Baseband, Kernel and Build number (rooted)
Are you using "Market Enabeler"? It can change your APN settings, and you need to restore the provider setting.
just rooted my device.
still same weird issue.
issue again: simply whenever my device tries to connect to H+ , the device automatically enters flight mode and automatically disable flight mode so that the signal bars come back without H+ and when i check back the saved APN i see nothing there ( thought i was there before ). and this strange behavior disappears when i switch the mode from GSM/WCDMA auto TO GSM only .. after i do this the device connects regularly to Edge network and i can browse the net.
so basicaly for me i will be only able to use the device on Edge instead of HSDPA or 3G.
im really hoping for help from here because i don't think i will find any help outside of this expert community.
regards
try to make it on obligatory 3G (WCDMA only) and check if the problem still there ..
still same problem juffo
i have noticed that another post are poping up talking about almost the same issure.
i hope a new firmware will fix this
Hello,
I have a huge problem with my Galaxy S5 SM-G900F. I bought it abroad and when I used it for the first time in my country I saw, that there is a problem with 4G/WCDMA connection. When I put my sim card to the phone and set all the preferences in mobile connection menu to "Auto" there is no possibility to call or to recieve calls (even if i saw signal strength meter showing some marks). I can only recieve and making call when I set "only 2G" option and manually select my network. But signal is also very poor.
What I have checked yet:
1. Other sim also doesn't work good.
2. After *#06# i saw my IMEI and it is the same under the battery and on the box (doesn't start from "00") so i think that it is not missed (efs folder).
3. Change firmware with KIES and ODIN for the other version - no changes. Also flash some other "modem" files with Odin with no success in better signal.
4. When im on the free air the signal strength is even at maximum level, but immidiately after going to my house - there is no signal. I saw also, that when im in the city i can connect with 2G network (only), but when im on a village there is no signal at all (even 2G...)
Do you have any ideas what can be wrong? Is this hardware failure? Maybe something with antenna? What should I do before going to gsm service center? Maybe i should change kernel and try some of the custom roms?
Thank you for your help.
regards
Mario
mecenas666 said:
Hello,
I have a huge problem with my Galaxy S5 SM-G900F. I bought it abroad and when I used it for the first time in my country I saw, that there is a problem with 4G/WCDMA connection. When I put my sim card to the phone and set all the preferences in mobile connection menu to "Auto" there is no possibility to call or to recieve calls (even if i saw signal strength meter showing some marks). I can only recieve and making call when I set "only 2G" option and manually select my network. But signal is also very poor.
What I have checked yet:
1. Other sim also doesn't work good.
2. After *#06# i saw my IMEI and it is the same under the battery and on the box (doesn't start from "00") so i think that it is not missed (efs folder).
3. Change firmware with KIES and ODIN for the other version - no changes. Also flash some other "modem" files with Odin with no success in better signal.
4. When im on the free air the signal strength is even at maximum level, but immidiately after going to my house - there is no signal. I saw also, that when im in the city i can connect with 2G network (only), but when im on a village there is no signal at all (even 2G...)
Do you have any ideas what can be wrong? Is this hardware failure? Maybe something with antenna? What should I do before going to gsm service center? Maybe i should change kernel and try some of the custom roms?
Thank you for your help.
regards
Mario
Click to expand...
Click to collapse
Maybe there is a region lock? Does the Imei start with 35xxxxxx? Does the S5 support the local 4G bands of your provider? Maybe ask your provider for a new simcard. Correct APN settings applied?
My IMEI starts with "35....". Samsung S5 should be able to connect with WCDMA/4G LTE bands in my country. My sim card was changed about 3 months ago, so it is good - i have checked it in nexus 5 and everything works very well. All APN settings are applied.
How can i check if the phone has region lock? The phone is from UK and now I live in Poland.
..
mecenas666 said:
My IMEI starts with "35....". Samsung S5 should be able to connect with WCDMA/4G LTE bands in my country. My sim card was changed about 3 months ago, so it is good - i have checked it in nexus 5 and everything works very well. All APN settings are applied.
How can i check if the phone has region lock? The phone is from UK and now I live in Poland.
Click to expand...
Click to collapse
You can check on the box. If is has region lock, there will be a warning message printed on the box.
Is there any warning message in the notification bar?
And please check as below:
While the phone is receiving LTE/WCDMA signal, open the Dialer, enter *#0011# --> capture screenshot (1).
Then press Menu > Back entry (not Back key) > Menu > Key Input > Q0 > wait for some seconds... > MAIN MENU > DEBUG SCREEN > NAS INFORMATION > MM INFORMATION --> capture screenshot (2). And then Menu > Back entry MM REJECT CAUSE --> capture screenshot (3).
And post these 3 screenshots.
I was able to connect to wcdma signal (I think) for some minutes. I give you all screenshots.
mecenas666 said:
I was able to connect to wcdma signal (I think) for some minutes. I give you all screenshots.
Click to expand...
Click to collapse
Is your network Polkomtel?
The error cause is: No suitable cells in location area - This cause is sent to the phone if it requests location updating in a location area where the subscriber, by its subscription, is not allowed to operate, but when it should find another allowed location area in the same network.
So may need to give this information to your network operator and ask them to fix.
So it is not the phone problem? It is my network operator error?
My network is Play P4, but this provider has no transmitters for his own in Poland (or has very few). He is able to use all of transmitters in Poland through the roaming (so teoretically i can connect with Polkomtel, T-Mobile and orange transmitters)
T-Mobile No Signal
Hi, este you able to fix your problem, ir so can you Please tell me how?