Related
Hi all.
Is there a way to access the FAT32 partition on the SD through the USB cable (the same way I used to do with the Magic)?
Disabling the USB debug mode won't help!
Thanks.
Yes, just plug it in and there should be a notification asking if you want to 'mount' the storage. When you mount the storage it will become visible to your PC just as if it was a usb memory stick.
so for the idiot's guide (not calling you and idiot, but you clearly have not read the manual).
When you plug the usb cable in, at the top of the phone screen there should be a usb sign.
drag the notification bar down.
there should be a line for usb stating click to mount.
Click.
A popup will ask you do you want to mount, click 'mount'
DONE!
Please remember to unmount when disconnecting. do this either by ejecting the drive in windows OR the same method as mounting but the popup will ask you to unmount.
but again again again this is in the manual/.
And before I get any H8's saying you need to mount to access the manual, its also on the HTC site. so Raspberry to you.
It simply doesn't work. I did read TFR!
OK.
Are you trying this at work? It's possible through a windows reg change to disable the usb ports, my place does this but can be fixed with a simple reg script.
Have you another usb drive to try in the port you are using?
Just checking that your connecting it to the back of the computer as they are the main ports (ones directly connected to your mobo) as sometimes the front ones wont work if not connected/enabled.
If you do have another device/drive and this works in the port then bad times.
Uqbar said:
It simply doesn't work. I did read TFR!
Click to expand...
Click to collapse
It would be more useful if you could tell us what it does do, rather than that it simply doesn't work.
1. When you plug the USB cable in, do you get "USB Connected" notification? If so, when you bring this up, do you get the option to mount the SD card?
2. Have you tried a different USB cable and/or connecting the phone to a different PC?
3. Have you tried with a different SD card in the phone?
4. Have you repartitioned your SD card in any way? (i.e. added swap, ext3 whatever?)
Regards,
Dave
1. No, I don't get any notification at all.
2. Different cables, same result. USB memory stick and USB hard drive work on the very same port.
3. Yes, same result.
4. Yes, I did the "usual" 3 partitions.
5. I'm running MoDaCo 2.1
FIXED while troubleshooting!
6. I switched to my Nokia DKE-2 cable and it magically worked.
7. The old cables used to work with ADB but not in storage mode.
8. All three cable can charge the phone.
9. I presume a problem with the cable, but have no idea about the nature.
Anyway, the thing was really not working at all. Please give first a look to my first post. I already tried a number of things before posting.
Uqbar said:
FIXED while troubleshooting!
6. I switched to my Nokia DKE-2 cable and it magically worked.
7. The old cables used to work with ADB but not in storage mode.
8. All three cable can charge the phone.
9. I presume a problem with the cable, but have no idea about the nature.
Click to expand...
Click to collapse
Just as a matter of interest, did you try with the cable that came with the phone? At the very least that should be working too.
Thus far, I've had no problems with 3 or 4 different USB cables, but I have seen issues like this in the past where cables didn't have all pins connected.
Regards,
Dave
I've lost my original cable some thousands kilometers away from home.
This is why I got using my digital camera and USB hard drive min-USB cables.
I got no problem so far apart of not being able to mount the phone's SD.
I presume a weird wiring problem. Maybe this thing can be put in a FAQ.
So I can't get my desktop OR laptop running XP Pro 32 to even recognize the phone. As in no audio plays and nothing appears in the system tray. Tried with/without debugging mode, installed the samsung drivers etc. The phone doesn't even show up in device manager at all- not even as something unrecognizable. Its as if the port is dead. The phone does 'ding' though and charge ok so it is receiving power... though nothing at all appears in the android notification tab when connected. Any ideas or anyone know of any apps on the pc or android side to take a closer look at whats happening on the bus?
The only way that I can get it to work is to put it in media mode. It shows up as a media device in Win7. If I put it on, "ask every time" or whatever it doesn't work and in mass storage mode it shows up as two unreadable drives, they are grayed out in Explorer... Basically...don't use the "ask every time" for USB function.
This function seems like such a simple thing, not sure why Samsung has so many issues with it considering they have been making media devices for a long time.
Anyway... do you have access to a newer OS to at least rule that out as a cause. Not saying it shouldn't work with XP 32 but just something to check out.
I was having similar issues at first. I take it adb doesn't work either? Well my fix was to delete my whole Android SDK folder, then I redownloaded it (though I just kept the "tools" folder this time). Then I downloaded "USBDeview" (google it) to delete every USB driver that had to do with android (basically just left the printers, HID, and my Sansa drivers), restarted, then I downloaded the samsung drivers from the thread on here, plugged my phone in and manually pointed the driver search to the drivers.
ADB and Mass Storage has been working fine since. All I can tell you is to keep checking cause there's something you're missing, I also thought to myself "what the heck else can I do?" since I had done each one of those steps previously, but maybe I just had to do them all together. Good luck.
another possible solution is to change cables if you're not using the samsung provided cable - some cables are charger only (no data) - some of the motorola cables are charger only and we've already had one poster that had that issue
I couldn't get it to work at first either. I more or less did this.
I plugged in my phone. I did not enable mass storage mode on my phone. Walked away and let my PC think for a while. I came back and I noticed I had two new drives. I then enabled mass storage mode and could connect.
Two of my machines I had to do this. I'm not sure why it wasn't instant, but it just took a bit of patience and walking away from the machine to let it think for a while before I guess it installed the drivers and made its peace with the fact it wasn't the G1 any more.
Say into voice dialer "Open SD card" -> check "Enable USB mass storage". That works if port on PC is OK.
If it's a driver issue, open device manager and uninstall the usb ports. Unplug everything from usb and when you reboot the computer it will automatically reinstall the usb ports.
Sent from my Vibrant
I ran into the same issue. It was a problem with the USB cable I was using. As soon as I tried a different cable it worked fine.
larryccf said:
another possible solution is to change cables if you're not using the samsung provided cable - some cables are charger only (no data) - some of the motorola cables are charger only and we've already had one poster that had that issue
Click to expand...
Click to collapse
I second this, I forgot my sammy cable at work on Friday and on way home stopped at T-Mo and picked up a charger w/cable and realized right away this was just a charging cable as soon as I connected it to my PC. I'm returning the cable back to T-Mo tonight. At least I was able to charge my phone over the weekend.
UPDATE: You guys are right, it is the goddamn cables! I bought an extra wall charger + cable at the t-mobile store and was using that at home. I had left the original in-box cable at work. Tried the cable at work today and now the drives pop up. Still don't appear writeable but I can look into that when I have time, probably the typical driver issue. As far as I can tell those separate cables are power only! $15 for a two wires + dc adapter. Thanks Samsung. Grr.
i suspect the mfgrs have gone to charge only cables to help keep folks from tethering - just a suspicion
if the "drives" are popping up, have you "mounted" the phone (pull down notification bar, clik on USB connected and it should give you a window asking to mount the cards or drive)
FYI....The Rocketfish cables you get from Best Buy do not work. They are only capable of charging.
@larryccf...I don't think certain manufacturers are implementing this on purpose so we can't tether. I think their just being cheap.
Where I got my cables on the cheap! and my problem.
I got my cable at monoprice.com. Check it out that is a 10 foot usb cable for $1.69 and it works for me. They have different lengths and even some colors. Now my Mass Storage issue . . .
My Mass Storage via USB works fine unless I enable "USB Debugging" which one of my apps needs to work. Once debugging is enabled I loss the ability to see my sd card and internal storage on my XP netbook. any ideas????
Same Problem
I have the exact issue, tried many things have'nt found a fix yet. Any help would be greatly appreciated!!!
Thanks,
crx
larryccf said:
if the "drives" are popping up, have you "mounted" the phone (pull down notification bar, clik on USB connected and it should give you a window asking to mount the cards or drive)
Click to expand...
Click to collapse
this worked for me Thanks
Yes phone is mounted, and can be seen w/o usb debugging enabled. However with usb/debugging on it does not read the phone being connected. Meaning that I cannot connect to ADB which is my main concern.
thanks for response tho,
crx
crxforya said:
Yes phone is mounted, and can be seen w/o usb debugging enabled. However with usb/debugging on it does not read the phone being connected. Meaning that I cannot connect to ADB which is my main concern.
thanks for response tho,
crx
Click to expand...
Click to collapse
This is my issue exactly, and I haven't found a fix either. Called T-Mobile and they thought turning off debugging was the only fix I needed.
Most of them, sorry to say are half retarded. They think a data reset is the cure-all
crxforya said:
Most of them, sorry to say are half retarded. They think a data reset is the cure-all
Click to expand...
Click to collapse
Ain't that the truth!
If you are running windows (x86 or x64), it would be wise to install the samsung drivers. I was having this exact problem, but as soon as I installed the drivers from samsung, viola!
I had the latest drivers from google, and they did not work for me.
Here is a link to the thread containing the links to the drivers, thanks to TGA_Gunnman:
http://forum.xda-developers.com/showthread.php?t=728929
I am having a huge problem mounting my Epic 4G to my Mac. When I select Mount USB, nothing happens. I have read several posts about Galaxy S phones having the same problem, they all say to have USB Debugging turned on, but mine is on and still can't mount.
Also, another huge problem. I connect my phone, then I use adb to access the sd card, but I can only use adb for a short period of time, then it disconnects itself, then I try to run adb again but it does not recognize it. I have to unplug the phone, then plug it again.
Does anybody have any idea why this is happening or how to fix it?
Note: I can do everything perfectly fine with my Sprint Hero
Thanks
JGeZau said:
I am having a huge problem mounting my Epic 4G to my Mac. When I select Mount USB, nothing happens. I have read several posts about Galaxy S phones having the same problem, they all say to have USB Debugging turned on, but mine is on and still can't mount.
Also, another huge problem. I connect my phone, then I use adb to access the sd card, but I can only use adb for a short period of time, then it disconnects itself, then I try to run adb again but it does not recognize it. I have to unplug the phone, then plug it again.
Does anybody have any idea why this is happening or how to fix it?
Note: I can do everything perfectly fine with my Sprint Hero
Thanks
Click to expand...
Click to collapse
I've successfully mounted my SD card on OSX. I have debugging turned off. If it won't mount, try a different slot, if that doesn't work, try rebooting the phone. It will work.
JGeZau said:
I am having a huge problem mounting my Epic 4G to my Mac. When I select Mount USB, nothing happens. I have read several posts about Galaxy S phones having the same problem, they all say to have USB Debugging turned on, but mine is on and still can't mount.
Also, another huge problem. I connect my phone, then I use adb to access the sd card, but I can only use adb for a short period of time, then it disconnects itself, then I try to run adb again but it does not recognize it. I have to unplug the phone, then plug it again.
Does anybody have any idea why this is happening or how to fix it?
Note: I can do everything perfectly fine with my Sprint Hero
Thanks
Click to expand...
Click to collapse
Dude, welcome to the club. Since i got my phone i have not successfully been able to have it read on my Mac Mini. Tried different cables and different ports. Some say get a powered USB hub but i'm not in the mood to clutter my puny desk space.
For now i use an app called Websharing to transfer stuff via WiFi. It's a pain sometimes but that's how i get by for now.
I don't have any problem with 10.5 or .6
I can use either regular or debug. Sometimes rebooting the phone and/or the computer helps. It could be a crappy cable. I don't think the supplied one is very good. The one I use with no problems is the overpriced 3 footer that the corporate sprint stores have. I think the cables that came with the epic, moment, and evo were el cheapo. I had a problem that you are describing with a stock supplied cable. I figured out that the micro usb end wasn't making solid contact with the phone. If I would move the cable, it would disconnect. Changing to a real micro usb cable helped me. It could be the usb port is flaky or the usb plug is intermittent. If you are using vmware fusion or bootcamp or dual boot, see if it drops connection in a different os.
No luck under Windows7 (running with Parallels Desktop) either. I'll try buying a new USB cable and see if that works ... Will try Websharing too.
Thanks
I am able to see and access the SD card at work after installing Samsumg USB Drivers under Windows XP, however I am not able to use adb to access the phone ... ahh, this is driving me crazy, I need to root the phone and install a custom rom ... >_<
JGeZau said:
I am able to see and access the SD card at work after installing Samsumg USB Drivers under Windows XP, however I am not able to use adb to access the phone ... ahh, this is driving me crazy, I need to root the phone and install a custom rom ... >_<
Click to expand...
Click to collapse
Did you put your phone into debug mode?
I found that trying different USB slots on the PC, it will eventually work. When you plug it in the first time, it will install some needed drivers ABD etc, if you unplug the phone and plug it back into the same USB slot, it will install the last remaining drivers and you should now be able to see the phone.
Samsungs drivers are flaky at best. It took me a good hour to get it working for me so I could root my phone.
blazinazn said:
Did you put your phone into debug mode?
I found that trying different USB slots on the PC, it will eventually work. When you plug it in the first time, it will install some needed drivers ABD etc, if you unplug the phone and plug it back into the same USB slot, it will install the last remaining drivers and you should now be able to see the phone.
Samsungs drivers are flaky at best. It took me a good hour to get it working for me so I could root my phone.
Click to expand...
Click to collapse
That worked, turning on USB debugging and switching to another USB slot. But, this is at work under WinXP. Now I need to make it work under OSX at home.
I'll try Ubuntu when I get home and see if that works...
Thanks
JGeZau said:
That worked, turning on USB debugging and switching to another USB slot. But, this is at work under WinXP. Now I need to make it work under OSX at home.
I'll try Ubuntu when I get home and see if that works...
Thanks
Click to expand...
Click to collapse
I know some people successfully installed Clockwork via Mac but I haven't seen anything about root. Instructions might be the same, files are obviously different, maybe it'll help you:
http://forum.xda-developers.com/showpost.php?p=8163186&postcount=87
I still can't conect to my Mac. Already bought a new cable and did everything I could...I'm getting mad
Sent from my SPH-D700 using Tapatalk
help me too please!!!
i my self having the same issues but on my windows xp desktop computer i never had this problem with a droid i always just plug it in the usb an my sd card pop up on the screen but on this epic 4g my god it doesn't make a sound on the computer or show any thing all it do is charging my phone i even mount it like i always on my droid can some one please tell me whats the issue i have alot of apk files i want to put in my sd card i need to get set cpu up an running an other roms on my epic 4g thanks for looking help.
temporary fix
This topic has been discussed at another tread.... but anyway, The Macs (current generation only) do not give you enough energy at the USB to power the phone into connecting the memory card. Nor even enough to recognize the phone for more than a few seconds. You can get around it, temporarily, by connecting through a powered USB port. Tetheris still doen's work, but at least you can mount your sd card. It's a software issue... if you're running Windows on the mac machine, it'll connect and mount fine. So, ask Mac for a fix.
Wellington Amaral said:
This topic has been discussed at another tread.... but anyway, The Macs (current generation only) do not give you enough energy at the USB to power the phone into connecting the memory card. Nor even enough to recognize the phone for more than a few seconds. You can get around it, temporarily, by connecting through a powered USB port. Tetheris still doen's work, but at least you can mount your sd card. It's a software issue... if you're running Windows on the mac machine, it'll connect and mount fine. So, ask Mac for a fix.
Click to expand...
Click to collapse
Yes..thanks. That did it for me. The only thing I hadn't tried was plugging it into my powered usb hub...boom it works.
Worked for me too... can't f'in believe it.
I cannot get my epic to mount for ANYTHING! I factory wiped the phone, nope, I used a palm pre usb cable nope, I downloaded the official samsung drivers nope, I plugged the cable into the motherboard on the computer nope, I tried a different computer running windows 7, nope tried a laptop using windows vista, nope. Does anyone know ANY WAY POSSIBLE to get this thing to mount? I selected mass storage and dissabled and enabled usb debugging. Im just not having any luck. It seems that the computer recognizes the phone is connected just cant get to the files on the SD card.
I also spent many hours trying to figure out what the hell was wrong with my Epic, that is, why it would come up as a "malfunction" in Windows when I plugged the USB cable in.
I tried drivers, different restore points, wiping, etc. etc. etc.
To the point... Try a new USB cable. The one packaged with the Epic is junk. As a matter of fact, it worked several times before it crapped out. I have no idea why, but I picked up a new micro USB cable, plugged it in, and the phone was then immediately recognized by my computer to allow mass storage mount.
People who tried the Palm Pre USB cable also had issues for some reason.
IMO, there should be a sticky posted in this board regarding the packaged USB cable, as I encounter this issue quite a bit.
Ok I'll try to find a new one really quick thanks
ugh tried an HTC Mytouch 4g usb cable and that didnt work either. Gonna try a class 4 usb stick and im gonna try puttting all of the files on the computer from the SD card
Edit: Oh wow i cant put the files on the computer duh
Edit: Ok now I'm mad a Class 4 SD card wont connect to the computer thru the epic ughhhh
I'm guessing during this time, you've rebooted the computer a few times? Sometimes, that's all it takes...
Try uninstalling ALL of the USB drivers associated with the Epic, rebooting the computer, then connecting (with debug mode OFF). Windows found and installed the USB drivers for me in just a few seconds when I did this [with the new cable, the first time].
- G
Have u enabled development mode under settings > applications (in your) epic? If not, try that, then plug in cable.
Then pull down the notification bar and it'll give you back the option.. again, if you haven't tried this.
On occasion I have troubles with the Epic mounting/ejecting on a Mac, but the only time I've ever had an issue with it mounting on a PC a different cable solved the problem immediately.
Try a different USB port on your PC. If that doesn't work, try rebooting the PC and the phone.
I had luck with trying different usb ports though
I had this problem as well and:
1. Tried 4 different cables
2. Tried all 4 on all 4 different USB ports
3. Rebooted numerous times
4. Uninstalled/reinstalled drivers
5. Tried 3 different PCs (1 other running 7 and another running Vista)
6. Did 1-4 on all three computers.
OH! and the reason I was so adamant about finding a solution was that I was stuck in Clockwork... due to having messed up an EXT4/RFS/CW2.5/CW3.0 installation... It was MY fault... I screwed up.
The problem was I had been living with the nonmounting problem by simply putting my MicroSD into an adapter and plugging it into my Laptop for file transfers... never expecting to HAVE to ODIN at some time...
Anyway... I ended up coughing up the $100 to Insurance and replacing the phone.
HERE IS MY THEORY: I think what my problem was was that the USB port on the Phone was messed up. I think these USB ports are possibly a hardware fail point and the changing of cables has been a patch on the issue with the port... NOT the cables themselves!
I'm not suggesting that you are there yet since it sounds like you can at least still get the phone to boot up (and aren't stuck in CW) and could still use a work around of putting files on the MicroSD with an adapter...
But I would suggest you don't be as stupid as me and get yourself in a position where ODIN is your only hope.
Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...
OregonLAN said:
Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...
Click to expand...
Click to collapse
You don't really think that I sent in a phone that was stuck in CW do you? I don't think that would have worked too well for me.....
Cheers!
Did you end up doing an ODIN restore
I rooted my NC from 1.1.0 using autonooter awhile ago and it works pretty well in general. I used to be able to hook it up to my home PC (w7) and my work PC (XP) with no problems. ADB worked (usually), the drives showed up, etc.
Everything still works on the work PC, and another W7 PC I tried it on.
Now, for some reason, neither the NC nor its SD card show up on my home PC when I plug it in! The NC shows the normal "USB Mode" screen when I plug it in, and my PC makes the USB Ding sound. But no new drives show up.
The only thing I can think of that changed is around the time it stopped working, I replaced my old USB Card reader with a new one (old one didn't work with SDHC). I also renamed some drive letters to reorganize them, since the card reader always shows 4 drive letters in windows.
I don't see the USB controller entry for the NC that I used to see in Device Manager either.
Check for NookcolorUMS app
I was having some bizarre connection issues with my PC, too, and they seem to have been corrected (at least they haven't recurred) by using a USB extension cable. It makes no sense, and I didn't do it to attempt a fix, but just noticed that the issues seemed worst when plugging into the top-side 'convenience' USB ports, and had an extra extension cable sitting around, so I plugged that into a rear port to make access less awkward. Since then, the PC consistently mounts everything just like it should.
I'm still using the NC's data cable, just plugging it into a maybe 1' extension cable rather than directly in the slot.
my XP based computer won't see the rooted NC either, however I will have to try using a port on the motherboard as opposed to one of the front mounts and see if that does the trick. I just kinda gave up on it as I didn't really need it too bad (I only use my nook for email, web browsing, and to control my DVR).
Well I unrooted my NC as I had planned anyway to upgrade to 1.2, but the problem hasn't gone away.
I tried plugging into an extension cable I have that goes directly to a MoBo rear port, but no change.
I can't run the nookcolorUMS now that I'm unrooted. Maybe I'll try it when I re-root eventually.
The thing is, it works on every other computer, so I can't figure out why it would stop working on just this one. It seems like it must be a windows issue, but I'll be damned if I can figure out what it is.
I don't bother with usb
USB connectivity is so unreliable that I don't even bother with it.
To move files around I use File Expert/network to access the PC via wireless from the device.
It's easy, reliable, and FAST.
framitz said:
USB connectivity is so unreliable that I don't even bother with it.
To move files around I use File Expert/network to access the PC via wireless from the device.
It's easy, reliable, and FAST.
Click to expand...
Click to collapse
That's a good tip. Unfortunately you have to use USB for certain functions, like manual nooting, or synching with Calibre (I suspect).
Once I'm rooted again I'll probably start using wireless for small stuff, but if I'm moving a gigabyte movie over, I'm not sure how long that will take, or how much battery it will use.
Does anything come up in device manager when you connect it? If so, did you try deleting anything that does come up, disconnect and start over? Worth a shot....
You don't have to guess--if you see a USB device that might be the NC, open properties>details and from the dropdown choose "hardware ids." If the number 2080 is in the id, it's the NC.
Nothing new comes up in device manager when I plug it in. It used to...
I experienced a similar issue and this was what causing it.
1. I have 2 front USB connections (nothing connected to either)
2. External Power USB hub connected to a rear USB slot
On Win 7, whenever I plug-in the NC via USB, I got a device not recognize error. I tried plugging it into different ports and pretty much either got no detection or device not recognize. Here is the kicker, as soon as I plug it into the usb hub, window recognize and mount it right away. This also happen to be true if I remove the usb hub altogether.