How do i unlock the rar file that i downloaded from samsung firmware?
the password is: samsung-firmware or something like that try it
Thanks you were close. it was ( samsung-firmwares.com )
Related
if you have unlocked the boot loader of htc explorer , you cann't firmware flashing with ruu.exe firmware file ,you cann't make firmware flashing by ruu.exe firmware file.
so you can download this firmware http://www.mediafire.com/?0cs0yk69rgn097w
password = hlalwinoo
you extract you are download file , now you are put fasttboot mode htc explorer joy you computer and than double click rumme ...
Hi
i have Galaxy Grand dous G531H Stuck on logo
i tried with odin the official firmware From samsung and it's Success But Still stuck on logo
i tried the repair From this page
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
But with 3 BL , CP and CSC it Fail with me
and With AP it Give Wrong
Custom binary blocked by FRP
i tried with rooted ROM but it Fail
i try with kies but i Can't connect to it
Model : SM-G531h/DS
FCC ID: A3LSMG531H
SSN:-G531H/DSGSMH
any ideas
or
ROM it should try
roo7_shmali said:
Hi
i have Galaxy Grand dous G531H Stuck on logo
i tried with odin the official firmware From samsung and it's Success But Still stuck on logo
i tried the repair From this page
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
But with 3 BL , CP and CSC it Fail with me
and With AP it Give Wrong
Custom binary blocked by FRP
i tried with rooted ROM but it Fail
i try with kies but i Can't connect to it
Model : SM-G531h/DS
FCC ID: A3LSMG531H
SSN:-G531H/DSGSMH
Click to expand...
Click to collapse
Download this : https://mega.nz/#!IMFj0CAK!iVB3amQ1vesRuRpDwNHmc8zvUoL3nrPRXq1KanBdJJA
Unzip it
Put it in the AP (in Odin)
If fail then try use the included Odin in the stock ROM zip (but if you can access recovery, please factory reset first)
naimrlet said:
Download this : https://mega.nz/#!IMFj0CAK!iVB3amQ1vesRuRpDwNHmc8zvUoL3nrPRXq1KanBdJJA
Unzip it
Put it in the AP (in Odin)
If fail then try use the included Odin in the stock ROM zip (but if you can access recovery, please factory reset first)
Click to expand...
Click to collapse
it worked till last second gives me Fail
look at attach file
roo7_shmali said:
it worked till last second gives me Fail
look at attach file
Click to expand...
Click to collapse
Extract the stock tar.md5 file.(using winrar or 7zip)
You will see a lot of files with .img at the end of them.
Rename the file "hidden.img" to "hidden.img.tar"
Go to odin and choose AP and find the file "hidden.img.tar" (in the extracted tar.md5 folder)
Click START
After that your device will show the android logo and it will looks like it's updating.
Leave it. Your phone will reboot after that. (If not then turn the phone on manually)
^^
Before i read your reply i unzip the file and delete Hidden file and i repack to tar file with 7zip
and start with odin and it Give me pass
but when reboot still stuck on logo
after that i tried your way
give me pass but still stuck on logo
naimrlet said:
Extract the stock tar.md5 file.(using winrar or 7zip)
You will see a lot of files with .img at the end of them.
Rename the file "hidden.img" to "hidden.img.tar"
Go to odin and choose AP and find the file "hidden.img.tar" (in the extracted tar.md5 folder)
Click START
After that your device will show the android logo and it will looks like it's updating.
Leave it. Your phone will reboot after that. (If not then turn the phone on manually)
Click to expand...
Click to collapse
any new ideas plz
roo7_shmali said:
any new ideas plz
Click to expand...
Click to collapse
Try using smart switch/kies and then go to "firmware initialization..." and restore your phone there
If not detect click the "reinstall driver" and reconnect your device.
If still not detect maybe you mess up something on your phone...
Still not working?
Hey guys I have the combination firmware for Samsung galaxy S8 korean version G950N and with the stock firmware the frp can be bpassed easily.
Here is a link for the combination firmware
you can find stock firmware at firmwarefile. com
remove the spaces in the link
After the download flash the combination firmware using odin then after a few reboots turn of the phone and flash the stock firmware using odin and make sure to skip (don't flash) the "CP" tab then when the phone boots complete partially incomplete setup wizard and goto settings make factory reset.
Not working. I have an error: disk corupted, must reset. And that's it, I 'm in same frp
Thread closed
Hi !
I wanted to flash my wifi only Galaxy Tab S5e (SM-T720) via odin to change the region.
I downloaded the correct firmware (that does not contain the CP file because wifi only)
I entered the path of the BL, CP, AP and Home CSC files.
But when I flash I obtain a "modem" error at last and I'm not able to boot the tablet anymore.
Is there a way to fix it ?
Thank you all
Did you get it fixed
Atomic Lutin said:
Hi !
I wanted to flash my wifi only Galaxy Tab S5e (SM-T720) via odin to change the region.
I downloaded the correct firmware (that does not contain the CP file because wifi only)
I entered the path of the BL, CP, AP and Home CSC files.
But when I flash I obtain a "modem" error at last and I'm not able to boot the tablet anymore.
Is there a way to fix it ?
Thank you all
Click to expand...
Click to collapse
Was you able to get this fixed?
installed firmware:
https://ibb.co/ggCYYkN
recovery:
https://ibb.co/bzd8dxs
i try to install :
G950FXXU4CRJ5_G950FOXM4CRJ3_ARO
Prince Comsy Odin v3.12
first time i tryed to burn the rom i got in odin write failed (or similar i didn't write it down).
second time and later i get PIT error
https://ibb.co/cxYd0YP
please your help to understand whats going on with this device \ firmware
do-d said:
installed firmware:
https://ibb.co/ggCYYkN
recovery:
https://ibb.co/bzd8dxs
i try to install :
G950FXXU4CRJ5_G950FOXM4CRJ3_ARO
Prince Comsy Odin v3.12
first time i tryed to burn the rom i got in odin write failed (or similar i didn't write it down).
second time and later i get PIT error
https://ibb.co/cxYd0YP
please your help to understand whats going on with this device \ firmware
Click to expand...
Click to collapse
Looks like judging from your screen shots
1. You are trying to flash F firmware onto a U device. Exynos to snapdragon. Will cause you issues.
2. You will need Odin ( or patched Odin ) 3.13.1 or higher
3. You will need a binary ( bootloader ) version 5 or higher.
Just download latest firmware from sammobile
spawnlives said:
Looks like judging from your screen shots
1. You are trying to flash F firmware onto a U device. Exynos to snapdragon. Will cause you issues.
2. You will need Odin ( or patched Odin ) 3.13.1 or higher
3. You will need a binary ( bootloader ) version 5 or higher.
Click to expand...
Click to collapse
thank you!
phone was sold as F model , it has all stickers saying its F model
here it looks like an F firmware installed https://ibb.co/ggCYYkN
but its a U model ?
so for next time what is the right way to get the real device model ?
do-d said:
thank you!
phone was sold as F model , it has all stickers saying its F model
here it looks like an F firmware installed https://ibb.co/ggCYYkN
but its a U model ?
so for next time what is the right way to get the real device model ?
Click to expand...
Click to collapse
There are many guides on the internet regarding to phone authentication and about refurbished phones.
On your S8, since it doesn't have a removable battery, on the back, down the bottom, should show model no. etc. engraved on it ( not stickers ).
On the back it will also show iIMEI + serial number. Compare it to what it say's on the phone ( about phone + *#06# ) to the back engraving.
There are websites that can check your IMEI number to give you various information about the phone.
Buying a phone from the internet ( eg: eBay etc.) using the IMEI can be used as a way to check the phone.
i just got one more device from a local store , it's not official retailer of samsung , its from a paralel imports
and its the same ****
firmware box and stickers say SM-G950F
recovery say SM-G950U, i didn't tried to flush because i cant get the OEM unlock.
BTW is it possible to downgrade this device to android 8 ?
image uploader
so if i understood right i should be able to flush this firmware on this phone
G950USQU5CRL2
?
do-d said:
so if i understood right i should be able to flush this firmware on this phone
G950USQU5CRL2
?
Click to expand...
Click to collapse
In download mode it will have a line with PR SWREV
The number after the B is your binary ( bootloader ) number.You will need to flash this number or higher. You can not downgrade binary numbers.
Depending on what firmware you flash U or U1 you may need patched Odin.
spawnlives said:
In download mode it will have a line with PR SWREV
The number after the B is your binary ( bootloader ) number.You will need to flash this number or higher. You can not downgrade binary numbers.
Depending on what firmware you flash U or U1 you may need patched Odin.
Click to expand...
Click to collapse
so from Download Mode picture i can say binary 7 it is
in this firmware G950USQU5CRL2 U5 is it the binary or is it the security patch ?
do-d said:
so from Download Mode picture i can say binary 7 it is
in this firmware G950USQU5CRL2 U5 is it the binary or is it the security patch ?
Click to expand...
Click to collapse
Binary ( bootloader ) is the 5th number from the right of the firmware ( in the above post it's 7 )
e.g.:G950USQU5CRL2 - 5 is the binary number.
The letters/numbers after the binary number will tell you version ( security patch ) issue information but is easier to check the date of the firmware from the website you are downloading from.
thank you @spawnlives i really appreciate this
spawnlives said:
Binary ( bootloader ) is the 5th number from the right of the firmware ( in the above post it's 7 )
e.g.:G950USQU5CRL2 - 5 is the binary number.
The letters/numbers after the binary number will tell you version ( security patch ) issue information but is easier to check the date of the firmware from the website you are downloading from.
Click to expand...
Click to collapse
Sir, my binary matched with the ROM, but I get the error again as "secure check failIT", "sw rev check fail device 2 binary 1" and "secure check fail bootloader"
can u share the link to download the appropriate bootloader for J5 Prime(G570F)