Just bought the S200, no problem playing for two days. Just then I tried to use SPB backup and it gives a few errors but continue backup. After finished, it resets. Now the machine won't work. No response on the main display, phone keys OK. Tried to flash firmware always get 'SKU_incompatible' error. Hardware boot shows version S200_3.003c.00_EN_01. Please help to resolve the problem.
Problem solved. After searching I found the clean boot key combinations and its loading the software right now. Will read thru all the threads for more info on this machine.
Related
I flashed successfully after putting the PDA2k in USB mode.
I got the 3 Boot OPtions (KITL/Clean Registry Hive/Format Storage) , and my camera and record buttons are not responding so i cannot change the option 2 and 3 to Yes.
A relevant post by xplode mentions that it can be done via mtty, i downloaded but don't know what options to use for connections, or what commands to enter.
Appreciate help. I've spent at least 3 hours trying to sort this thing out but now it's a dead end.
MC
Note : i used Helmi R0 WM6 BA ROM
not a single reply ?! it's too much. It seems that other users are stuck with similar issue and their threads died as soon as they said "help".
In any case, i connected mtty and tried this;
http://forum.xda-developers.com/showpost.php?p=934239&postcount=12
The phone works, i have yet to test it with my Holux GPS receiver (the main reason i resurrected this device).
My question is ; is the mtty method above equivalent to doing the no/yes/yes in boot options ? i had to use because my hardware buttons are not responding during the boot options striped screen.
Guys, really, this cannot be the big mystery no one can resolve.
Thanks,
MC
If your device works correctly, there only 2 options:
1. You don't know how to press camera+record correctly (many people reported problems)
2. Your buttons have hardware malfunction
There is no such option, that buttons do not work during booting. I thought for a while about pre-release versions, but do not recall this particular error.
buttons work fine, they are fully functional when the device is running the OS.
I definitely am holding/pushing the right buttons and combination thereof, otherwise i wouldn't get into the striped color boot screen with the 3 boot options (KITL/Hive/Storage).
The problem have been reported by other people on the same thread. If i were you i would read this forum before eliminating this as a problem.
Tks,
MC
Ok so my hd mini decided to throw a spaz and freeze so I had to whip out the battery and restart, upon restarting it would load up the white HTC screen and then just go to a black screen and freeze on it, eventually after numerous hard resets and it freezing on the orange windows loading/setup screen it finally worked and everything was restored to factory settings.
Now two weeks later the same thing has happened only now the phone wont let me perform a hard reset, it comes up with this and a red, green, blue and white screen:
PB92100
SPL-1.31.0000
!microP(LED) error(0x00)! expected(0x1B)
I have no idea where to go from here to try and fix, thought about maybe flasing a new rom but the computer wont detect the phone through the usb cable...
Anyone have any ideas or suggestions, please?
now you are in bootloader screen (tricolour screen) so you can flash ONLY stock rom for your device ,folow the steps in my post here : http://forum.xda-developers.com/showthread.php?t=997285 .Feel free to ask me anything
Awesome, thanks for that ledavi will try it as soon as I get home from work.
Same problem
I also have the same problem.. But i cant access the phone in bootloader menu..
only the error code described above is showing.
Tried several times with dft_sspl and custom roms
And htcs own latest stock.
Only getting errorcode 260 No connection..
Havent found anything about this anywhere on the net.. Maybe i suck at searching
but i have been looking for a couple of hours now..
Anyone have any ideas of what i can try??
Regards Krister
Microp(LED) Error
My htc HD mini has the same problem. Shows "MicroP(LED) error (0x00)! Expected (0x1B)" in bootloader mode and wont let your flash or boot normally. Removing the battery for a while seems to be helping to boot it normally without the error. Once its up, its working perfectly until it freezes again. Any suggestions/solution to this problem ?
Hi there
I had the opportunity to fix this led error message by chance. After hours of trials, entering to the bootloader with volume down + power, my HD mini has never been recognized through USB connection.
For an unknown (magical?) reason, i plugged the phone to the usb port WHILE PUSHING VOLUME DOWN BUTTON, and the message disappeared, and the phone was finally recognized. I don't know if it's a matter of chance, but it's worth to try!!
Good luck, hope it will work
Hello XDAers,
I am a real noob at rooting or android-related, and a true one voided of any knowledge regarding anything IT- related.
So dear veterans, please go easy on me.
Due to my prior success of rooting and flashing my Nexus 4 successfully a few months back with no issues, I decided to give it a try to flash a custom ROM for my dad's LG Optimus L7 - which seemed an easy task compared to configuring my Nexus 4 - since there was no need for inputting any command lines or any dealing with the abd (using the easy shortcut, that is).
So, I followed the guide here: http://forum.xda-developers.com/showthread.php?t=1906133 ...
I first factory resettled the phone because it was bloated, then applied the "RunMe.bat" from the "What you desire!" folder. (Everything was already backed-up beforehand.) But the process didn't success until I've retried again and again by re-plugging the USB in because the application/PC couldn't detect the phone. In the same time, I was running KDZ_FW_UPD.exe in the background, so unexpectedly for me the phone shut itself and pushed itself to a vividly green emergency screen, then in a few seconds switched back to a screen of purple-white-blue glitches. I had to close KDZ_FW_UPD.exe without knowing what quite happened since it seemed to be the cause and restarted the process with RunMe.bat.
I didn't manage to "Restore" it first due to the fact that the phone stopped responding due to a lag asking for an encryption key. It was lagging so hard and I had to close the cmd around 5 tries while it was processing, but succeeded later on.
And then, to verify whether I've actually suceeded in rooting L7, I installed Root Checker from the Play Store. And again, for the first few tries the program froze on screen for a long period of time due to "system performance", but after rebooting and restarting the app a few times again, the ROOTING proves to be a success. Just to be sure, around this time I've reloaded KDZ_FW_UPD.exe and it suceeded.
So I went to install CWM and ES. CWM for recovery boot and ES for removing pre-installed system apps as the phone was lagging so badly. I've downloaded the CWM restoring(something like ~6.0.28?) first and tried fastbooting immediately right after, but instead of getting the fastboot menu I got a screen emptied in black with these words:
[5020] "Secure booting error"
[5020] "Cause: boot certification verify"
No hard keys could do anything on the presumed "fastboot", and so I had to hard boot again. I thought that it might be due to the lack of memory(checked on ES later on that it was 310~MB/2GB), and so I've used ES to uninstall a lot of system apps which I deemed uneccessary. So I've Googled a bit and it became apparent to me that that I've didn't unlock the device properly, so lurked around and found a file called L7CWM that is supposedly to resolve my problem, but I presume that it's the CWM recovery image that I've installed. So in the end, I didn't bother with it but kept it on tab just in case.
I repeated the same process with CWM again, but this time, the screen was joined with all kinds of flowery glitches. Restarted the device, and it went only downhill: now the Home launcher stayed all pitch black and nothing appeared. I waited a few minutes, but nothing there until the notification bar appeared. The home screen is apparently dead, and so are the menu keys. Switched to Nova Launcher(installed it just in case Home Launcher fails), and still dead. I couldn't access using any of the menu keys and had unusable launchers.
Hopefully I could still access to the settings from my status bar, but when I did, it started crashing immediately.
I've repeated the attempt a few times after restarting the device a few times, but nothing helped. It only got worse that the when the launcher did SEEM to work. It only showed the wallpaper without showing any of the icons/apps. And crashes again.
I could still access to the App menu via the settings, but couldn't open any of them and when I tried to uninstall them, the screen frozes immediately right after I gain access to the page (white page though) and gain this message: "Unfortunately Package Uninstaller Stopped!"
Then I convinced myself that the only thing I could do at the time was to factory reset the phone and then everything would go alright since I've just had to restore the system apps.
But then the black screen of death came right along with it:
"Secure booting error"
It seems that I'm out of luck... ... But just to check if I'm still left with resorts, I've downloaded the L7CWM file online...
... ...but it still didn't help.
So now I'm being left with no other choices other than asking for help. I never really understand what KDZ_FW_UPD.exe does since I had the LG Driver already before installing it, which I presume was for updating the phone to a newer or older version. And too complex tech articles are kind of alien for me.
EDIT(1 hour later): Okay, now I figured out the reason why L7CWM didn't work was because I didn't extract it to the right folder (after double checked via notepad that I was supposed to directly put it into the C:\ drive). Now it worked(?), but then it didn't.
After launching Flash_Bootloader.bat:
This message now appeared on the L7:
"Sorry!"
"SuperSU is not responding.
Would you like to close it?"
"Wait - Report - Close"
and a few minutes later
"Sorry!"
"Unfortunately, SuperSU has stopped."
"Report - OK"
Now I think the bugs till now happened was due to the fact that I've deleted a file that was required for me to launch apps... Now I just need the right fix.
After 5 minutes of screen inactivity the phone restarted by itself, kind of creepy... ...
Flash_Recovery.bat did nothing.
Reboot2Recovery.bat made it reboot but still struck on the same menu.
Nothing seems to be effective via the phone anymore, seems like I have to rely on abd but then again I don't know how... ... My dad is also f*cking pissed off ^ ^;...
__________________________________
I think that I explained the logs pretty precisely in case I missed something... I'll be very very very very very very thankful if someone could tell me what has caused my phone to fail though.
For references, here are the phone's specifications:
Model Number: LG-P705g
Android version: 4.0.3 (Stock)
Rooted:Yes (root checker)
Baseband version: MSM7227A-1-AA
Kernel version: 3.0.8-perf
Build number: IML74K
Software version: V10e-AUG-10-2012
If I don't get the phone fixed to being usable soon I think that I will get butchered real hard... ... Preferably needs a step-by-step guide made for toddlers... ...
remove the battery for 10 seconds,put it back pres VOL+ and VOL - same time and than press the power button.when you feel a vibration press for many times the button wich is down in right,try for many times and maybe it will working :}
Cydes said:
Hello XDAers,
If I don't get the phone fixed to being usable soon I think that I will get butchered real hard... ... Preferably needs a step-by-step guide made for toddlers... ...
Click to expand...
Click to collapse
simple answer for your
just download your stock rom
go to emergency mode
and flash that stock rom
My LS980 turns on for about ten seconds, doesn't recognize touch, and then reboots. I've tried everything to fix it....! I've tried multiple combinations of roms and radios, but no luck. I returned to stock with LG Flash tool. Half the time in download mode it tells me it's rooted, and half the time it says unrooted. LG Mobile Support Tool shows the correct software, but shows my phone as a test model. Also, if i try clicking upgrade, the program just freezes instead of downloading any software. I've tried restoring a backup in TWRP. Just results in a bootloop. Factory reset also does nothing.
My only thought might be that because of my cracked digitizer, LG's hardware key control service is trying to turn on to tell me my screen is broken. However, I don't know which service it is, so i can't force stop it in time before my phone reboots.
Does anyone have any idea of what might be wrong or which service LG's hardware key control is?? I've tried every other fix on the internet!!!
Lastly, I can handle using Linux if it's involved in the solution. Thanks in advance for any help!
hey all. i have a one touch that i think is bricked. ive tried to restore with button combinations etc. no help restarts to main screen and stays there. what i really would like to try is a re install of android system. some guidance as what i need to do so with software downloads tools etc. im not really to concerned with f***ing up the phone any more than it is. basically a learning process for me. Thanks for any guidance from here..