Related
I've had my Qtek 9000 for a week. I've spent most of that week installing software, and getting it setup (using a lot of useful info from this site).
This afternoon it locked up, and wouldn't respond to any button presses (including the on/off button)
Soft resets result in it powering backon, but stopping at the boot screen, after displaying the ROM versions in red text.
Eventually, I tried a hard-reset. Same thing happens - process goes ok until it displays the ROM version, when it just sits there. I've tried removing the SD card and SIM card and hard-resetting. No Joy.
I had just installed OzVGA, and was testing it when this occurred, but that is probably just a coincidence (surely a hardreset should fix anything bad that happened there?)
I hadn't at any point played with the ROM.
What should I try next?
And, does anyone know if I'm going to be able to get support for this in the US from Qtek? (I bought it in the UK), new
Thanks in advance.
-Steve
RE
Have you try taking out the battery, leave it for a while, put back the battery and do a hard reset?
It may work
Re: RE
FOSA said:
Have you try taking out the battery, leave it for a while, put back the battery and do a hard reset?
It may work
Click to expand...
Click to collapse
Unfortunately, no such luck
I'd tried that before, but the battery was only out for a short time. This time it was been out for at least 15 minutes.
Does anyone know if there's any kind of hardware or diagnostic test mode it can be booted into?
-Steve
How about updating/upgrading thr ROM?
This might work. you'll have to reinstall everything again, though
Jorgee said:
How about updating/upgrading thr ROM?
This might work. you'll have to reinstall everything again, though
Click to expand...
Click to collapse
Thanks - I may try that tomorrow. However, I'm a little concerned that updating it with a new ROM might invalidate the warranty (especially if it's not a QTEK ROM)
I was hoping that there was some kind of hidden 'diagnostic mode' I could try first, before taking that step. I've also been looking everywhere on the web, and I can't find anyone else that this has happened to. This makes me think it may be a hardware problem, though the way it just 'happened' seems more like s/ware.
Anyway, I'm out today so this will have to wait until tomorrow. My biggest concern at the moment is how I'm going to get any warranty support in the US. All I have at the moment is a very expensive brick!
-Steve
Have you tried entering bootloader mode?
BACKLIGHT BUTTON + POWER BUTTON + RESET HOLE
Then the screen will go blank then show the words SERIAL but you have to look real good because the backlight will be off when the serial is displayed. If it does go there, try hard resetting from there:
__ + __ + RESET HOLE
Hope this helps. WHat's your ROM verison/language anyway?
Jorgee said:
Have you tried entering bootloader mode?
BACKLIGHT BUTTON + POWER BUTTON + RESET HOLE
Then the screen will go blank then show the words SERIAL but you have to look real good because the backlight will be off when the serial is displayed. If it does go there, try hard resetting from there:
__ + __ + RESET HOLE
Hope this helps. WHat's your ROM verison/language anyway?
Click to expand...
Click to collapse
Thanks - but no improvement. I do get the 'serial' screen (with v1.00 displayed at the bottom), but when I do _+_+reset from there, it just goes back to the 'normal' Qtek boot screen and sits there.
Unfortunately, not having access to the OS, I don't know exactly the ROM versions etc. However, the info displayed in red text on the Qtek boot screen (where it hangs) is as follows. How do you interpret this?
R 1.03.00
G 42.36.P8
D 1.13.64 WWE
Thanks for your help - I'm hoping I can get this resolved without having to find out how to get support from Qtek!
-Steve
thefixer said:
Jorgee said:
Have you tried entering bootloader mode?
BACKLIGHT BUTTON + POWER BUTTON + RESET HOLE
Then the screen will go blank then show the words SERIAL but you have to look real good because the backlight will be off when the serial is displayed. If it does go there, try hard resetting from there:
__ + __ + RESET HOLE
Hope this helps. WHat's your ROM verison/language anyway?
Click to expand...
Click to collapse
Thanks - but no improvement. I do get the 'serial' screen (with v1.00 displayed at the bottom), but when I do _+_+reset from there, it just goes back to the 'normal' Qtek boot screen and sits there.
Unfortunately, not having access to the OS, I don't know exactly the ROM versions etc. However, the info displayed in red text on the Qtek boot screen (where it hangs) is as follows. How do you interpret this?
R 1.03.00
G 42.36.P8
D 1.13.64 WWE
Thanks for your help - I'm hoping I can get this resolved without having to find out how to get support from Qtek!
-Steve
Click to expand...
Click to collapse
You have a WWE (English QTEK ROM) but since you cannot enter bootloader mode, I don't think you will be able to update. You might have to return your device to where you bought it
Jorgee said:
You have a WWE (English QTEK ROM) but since you cannot enter bootloader mode, I don't think you will be able to update. You might have to return your device to where you bought it
Click to expand...
Click to collapse
Jorgee,
I notice (in the HTC 'confidential' manual I just downloaded) that there is a diagnostic program. Apparently, I put it on an SD card, and do Power+Backlight+reset to invoke it.
Do you know if that diagnostic tool is available anywhere on here, or elsewhere on the web?
Also - I wqas trying to find exactly how to enter 'bootloader' mode (after I have the 'serial' screen). Should it boot differently from here when doing a hware reset (_+_+reset)?
Regards
Steve
Actually, when you see SERIAL, that means you are already in bootloader mode. One question, what ROM do you wanna update to? QTEK, IMATE, MDA, O2?
Do the following once you get the SERIAL ON THE SCREEN:
1. Open active SYNC, then choose FILE>CONNECTION SETTINGS, then remove the check on the USB option.
2. Connect the phone to the computer with the sync cable. This should change the SERIAL on the device to say USB.
3. Run the ROM Upgrade (whichever it is you chose).
This shoulod update your device. If you are able to enter bootloader mode (SERIAL) this means that probably your ROM (OS) is damaged. Just update it even to the same verison then it should work.
If you get Country ID error while trying to update or any other error, just inform me, i'll walk you through the process.
Jorgee said:
Actually, when you see SERIAL, that means you are already in bootloader mode. One question, what ROM do you wanna update to? QTEK, IMATE, MDA, O2?
Do the following once you get the SERIAL ON THE SCREEN:
1. Open active SYNC, then choose FILE>CONNECTION SETTINGS, then remove the check on the USB option.
2. Connect the phone to the computer with the sync cable. This should change the SERIAL on the device to say USB.
3. Run the ROM Upgrade (whichever it is you chose).
This shoulod update your device. If you are able to enter bootloader mode (SERIAL) this means that probably your ROM (OS) is damaged. Just update it even to the same verison then it should work.
If you get Country ID error while trying to update or any other error, just inform me, i'll walk you through the process.
Click to expand...
Click to collapse
Hi Jorgee,
I'd prefer to go for the QTEK Rom (I'm assuming, from the info I posted above that I currently have 1.13.64 WWE). I'd like to go for the same or later version of this, but looking on the ftp site here I can't see ay QTEK ROM upgraders.
I have checked that when I plug in the USB I get 'USB' appearing on the screen, so I'm hoping that a ROM upgrade will at least work, even if it doesn't fix my problem.
One other thing that concerns me. When I plug into USB (with either a PC or the AC charger) the LEDs aren't lighting to indicate it's charging. Obviously, when during the flash upgrade I should make sure I have a reasonably charged battery. However, I don't know if I do (or even if it's currently charging).
-Steve
I guess leave it charged using the AC adapter for an hours, then here's the QTEK ROM.
ftp://xdaupload:[email protected]/Universal
Under Shipped ROM's you should see the QTEK.
If you cannot find it, tell me, ill send it to you. Trying to avoid this because it is almost 60MB in size
Jorgee said:
I guess leave it charged using the AC adapter for an hours, then here's the QTEK ROM.
ftp://xdaupload:[email protected]/Universal
Under Shipped ROM's you should see the QTEK.
If you cannot find it, tell me, ill send it to you. Trying to avoid this because it is almost 60MB in size
Click to expand...
Click to collapse
Thanks - I'd already found it on the devbuzz site, and am currently giving the unit an hour or two's charge before trying this. Wish me luck!!
-Steve
OK, here's what happened when I tried to update with the same Qtek firmware:
Initial dialog (that shows old and new (to be installed) firmware versions had blanks for all three firmware versions currently installed.
Started the upgrade, and left it running (couldn't bear the tension of watching!). Came back, and found the following error message displayed:
"Error 113: Extended ROM Update Error"
The update tool indicated that I should 'try again'. I'm currently re-charging the unit, and hoping (against hope) that this error was caused by insufficent battery charge.
-Steve
Okay, but maybe it just didn't update the extended ROM but the OS rom has been updated properly. After this error, try the __ + __ + reset button and see if it does boot fine.
Jorgee said:
Okay, but maybe it just didn't update the extended ROM but the OS rom has been updated properly. After this error, try the __ + __ + reset button and see if it does boot fine.
Click to expand...
Click to collapse
No luck.
I've also tried re-flashing a second time, but this time I watched it to see what happens
As the radio firmware is flashing, a message to that effect is shown on the Qtek screen. Once that is finished, the upgrade tool starts the extended ROM flash. At that time the Qtek's screen goes completely blank. The, after a minute or two, the upgrade tool reports that the extended ROM failed to upgrade.
I am assuming that normally, while flashing the extended ROM, there's a message on the phone's screen to say what's going on?
I'm also wondering whether to have a go at flashing the ROM in one of the other ways?
-Steve
I heard sometimes just flashing the Radio only might work.... Then after that you can flash the rest. Just extract the contents of the ROM to a directory. Take note of the ff:
Radio : radio_.nbf
OS : nk_.nbf
Ext : ms_.nbf
I just rename/move/delete the MS and NK files then run the update
Jorgee said:
I heard sometimes just flashing the Radio only might work.... Then after that you can flash the rest. Just extract the contents of the ROM to a directory. Take note of the ff:
Radio : radio_.nbf
OS : nk_.nbf
Ext : ms_.nbf
I just rename/move/delete the MS and NK files then run the update
Click to expand...
Click to collapse
Thanks Jorgee. Still no real success, but I think I might be getting closer.
I've tried the above (using both the original romupdate_ut.exe and MaUpgradeUt_noID.exe - same results with both).
I've tried each of the three files individually (using the ones from the shipped ROM, as downloaded above)
radio_.nbf always seems to flash ok
ms_.nbf always fails right at the start, and nothing appears on the phone's screen
nk.nbf almost worked. It started, and got up to 87% (tried this 3 times), with the update showing on both the phone screen and PC. Then it failed with error 112, leaving the '87% complete' message on the phone's screen.
Soft or hard reboots still result in us just ending up 'hung' at the boot screen.
Once again, thanks for your help so far. However, I am beginning to give up hope!
-Steve
I have the same problem with my Dopod 900 at post http://forum.xda-developers.com/viewtopic.php?p=207524#207524
But mine is no problem with EXTRom Upgrade
Waiting for your advise!
Thanks
truongia said:
I have the same problem with my Dopod 900 at post http://forum.xda-developers.com/viewtopic.php?p=207524#207524
But mine is no problem with EXTRom Upgrade
Waiting for your advise!
Thanks
Click to expand...
Click to collapse
I wish I had a solution!!! I've spent about 20 hours trying to get this thing to boot!
One question though - how did you get the 'boot option' menu up (allowing you to clear the registry etc). I might try that on mine (I had assumed that a hard reset ALWAYS cleared the registry.
Given that I was playing around with ozvga before this happened, there's a small chance that might help (though I think not; as I can't see how that would also stop the flash update working)
-Steve
please help i have the t-mobile mda compact pm200 and i was removing a cracked version on pocket dos v1.09 from the remove list and it said windows wil need to perform a soft rest yes or cancel i clicked yes and my system restarted but now it just get stuck at the t-mobile screen. i have tried doing the manufatures hard reset but no joy i have take out the battery no joy and i can't even access it through my p.c what can i do to get it up and running again i don't care about the data already on there cuz it is all backed up on my sd cad
When you took out your battery, have you been waiting til the backup battery fully drained out? It takes about 30-60 minutes, better leave a few hours. Try this and post your results...
thank for trying but unfrtunatly it had no effect i tried for two hours then reinserrted it and no joy so i waited a further day but still nothing any other ideas tnx
Is it getting into BootLoader? Then you might try Flashing a new ROM!
how would i go about doing that? my computer won't even recognis3e my phone
I had about the same problem:
I was trying to install the Pocket PC Greek language support (free trial version) from the site http://greek.pocket-pc.penreader.co...der_Greek.html. on my MDA Vario Tmobile when it crashed!! It shows just a white screen and does nothing at all!! I soft and hard reseted the device but after restarting it shows the Tmobile screen and after a few seconds a white screen! Actually I am not so sure that the device is hard reseting because it doesn't ask me for a confirmation of the hard reset. When I startup my device it stops on the same white screen.No windows loading, no other commands accepting, not recognized by my desktop.
Did anybody have the same problem before? Does anybody know how can i get my PPC on working condition again
Thanks dagonist.
I hope somebody can help....
See for ROM upgrades on the forum :wink: if u get some images on the mini then it's not dead! It's just stuck at the bootloader mode, meaning that the OS is somehow damaged.. To solve this prob u must plug the mini into the pc (it will be recognised as an unidentified device, don't worry), then download a ROM upgrade set (u will find these on the net or in the xda-dev ftp). Execute the prog, wait 'till it finished and voila! Ur device will come as new If u encounter problem do a simple search in the forum regards rom - bootloader - upgrade and u willl find a lot of infos :wink:
Hope this helps, MocciJ
Thanks MocciJ.....but my desktop pc doesnot "see" my pocket pc at all!!
:? then it isn't yet in bootloader, is just stuck at the beginning of a broken OS! I mean that it tries to load the OS, but then it gets stopped since he read bad ROM (probably deleted in some way since u encountered this prob removing a prog) try to get it in bootloader mode, by pressing together the camera, power and reset buttons.. U will lose all the things in the RAM memory, but in this case u really can't do anything else.. After entering in bootloader, u can easily upgrade it..
MocciJ
Well, I just tried the camera button+power button+reset button....and nothing happens! It reset and comes back to the same white screen...
Any other suggestions??
well, did u tried to make it correctly? I mean: for entering boot loader u havce to press camera + power, and then reset (with camera and power pressed) if u can't still enter the bootloader, then I'm out of ideas, sorry...
MocciJ
I amdoing it write but nothing happens....
In the screen what can u read? If u read serial (it is barely visible) then see if it turn to usb when u connect the cable: if yes, we 're at a very good point...
When it starts up it shows the Tmobile logo and then for a few seconds :
ipl 1.08
spl 1.08
gsm 01.09.10
(something else...)
after a few seconds a white screen without any letters or anything else.
But I cannot see it anywhere on my desktop pc...
:? I can't figure out how you can get it back.. If it displays images and text, then the bootloader is still alive.. It even tells u the correct version of the complete ROM.. but I wonder why it can't access to the bootloader.. u must search in the forum how to reach the bootloader, but I'm sure of the power camera reset combination; when u can read SERIAL or even better USB on the device, u probably have solved most of ur problems, but chances are that u have even bad clusters of ROM, and cannot be restored with an upgrade (it happened to the External Rom of my mini after a bad upgrade)
I suggest to send it to repairs, before doing somewhat wrong, because if there is an original ROM inside they will repair it for sure, free :wink:
MocciJ
Thanks. The problem is that I got the phone from ebay, from a UK seller, and it was locked to Tmobile. So I don't think that I can ask for a factory/guaranty repair....
Thanks. The problem is that I got the phone from ebay, from a UK seller, and it was locked to Tmobile. So I don't think that I can ask for a factory/warranty repair....
seee i tried all of thoose things but i found the main problem was getting the computer to recoginise the thing and the program i put on was a cracked version ( i know i am a naughty boy) so if i send it off they could cause legal problems couldn't it
it depends on what u are meaning by "not recognised" but I assume that windows dosesn't even try to recognise the device (I mean that there aren't bubbles, notifications, or any other changes on the system) for the cracked software, well if u have installed it right into any RAM folder (not in the storage memory) then u can tell the repairing center that ur unit simply doesn't power on correctly.. :wink:
MocciJ
Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
Hello mates,
My i-mate Jasjar doesn't start any longer. Here's how I got here. I tried to flash my jasjar with Crossbow ROM using ROMUpgradeUt.exe but it didn't do anything. So I went into the Country_ID_Error folder on the computer and executed MaUpgradeUt_noID.exe. My jasjar froze after this and everytime I restarted it just hung on the bootscreen that says i-mate.
So I tried using mamaich method using mtty and now I can't even get to the i-mate bootscreen. So nothing just happens when I try to power up the phone (I'm sure the battery isn't dead).
All I can do is just enter the bootloader mode. That is the only thing that I can do that I know.
Please suggest something. I'm lifeless without the i-mate.
Thanks and regards,
Aditya More.
i had this same issue, i task28?'d my device, whatever command that resets the flash structure, then booted into bootloader, and flashed this file:
http://rs507.rapidshare.com/files/184081773/JASJAR_WWE_11353_137_10301.zip
that should fix you up real good, hopefully.
Well thanks a lot. But it doesn't help. It gives me a connection error when everything is fine. USB is connected, ActiveSync USB connection is disallowed.
I forgot to mention, that when I task 28'd my device, nothing showed on the device. It just showed USB at the top and v2.01 at the bottom for ever, which means the task 28 wasn't probably successful or I ain't sure what.
Yeah, I had to ask you how if the above given file will work if the phone is in bootloader mode.
To fill you on more details, my phone somehow strangely starts. I'll explain how.
When the phone is switched off, and when I press the reset button, nothing actually happens, no activities can be observed.
When the phone is switched off and I connect it to the computer via USB, it shows the charging light. Now when I press the reset button with the phone connected to the USB, the charging light goes off and the USB detection sound sounds on the computer and the computer shows "USB Device not recognized". This means the phone started.
But strangely in both the above cases, none of the two lights on the phone indicate anything and display of the phone shows absolutely nothing.
The only thing I can do with the phone now is enter bootloader.
Also, since I compromised so much, is it possible that I can still flash it with WM6? Because going back to WM5 will make me feel miserable.
Thanks.
@cheapusenet:
I tried flashing with that file. It flashed successfully, but the screen is all smudged. I soft reseted the phone too (using reset+two soft keys) but it keeps displaying that same smudged screen.
Good news is it did something.
Bad new is that it didn't make the mate work.
Please help. I'm dying without the phone.
Thanks and best regards,
Aditya More.
is it possible you can get a picture of what screen its showing? I THINK it happened on mine as well, did you let it sit for 10 or so minutes? if i recall the bootscreen was all corrupted but it started into WM5 just fine.
and regarding wm6, i'd attempt to get the device working before you try and get fancy. is the device cid unlocked? mine was and thats what was causing the issues.
Originally Posted by mamaich
if you can enter bootloader - use "task 28 55aa", this would restore DOC to its original layout.
If you cannot - contact service center.
if you didnt run that exact command, it's probably a good idea.
and you could try reflashing that stock imate rom?
This is all that happens.. I have waited for 5 minutes. I'll wait for 20 minutes now.
i waited for 30 minutes.. no go..
yap it did that EXACT same thing to mine.
reflash it, i think that fixed mine.
if that doesnt work, attempt flashing some custom roms.
is it CID unlocked?
i flashed it twice.. no go..
what's CID unlocked?
CID
Read the Wiki on my sig link
cid unlock allows flashing of roms that don't match your device branding.
i don't remember what brought me back from that, i may have flashed a custom rom with the imate cid settings in it? i don't remember.
i'll post a rom that i think may have helped in a few hours, I have slow upload speed. until then, just keep tinkering.
also, you should only be flashing nk.nbf. not the ms, or radio nbfs.
http://milfweed.info/UNI_AKU3_2_WWE_IVAN_beta_4_extrom_public.rar
try that rom.
hey man.. Flashed the rom with Ranju's ROM of WM6.1.. it worked.. But I can get the phone to be turned on. i mean device turns on but I can't make or receive calls or text. Let me check the thread of that rom. Thanks a ton for your support. Really appreciate it.
Hi, i am sure someone will have an answer(even if it is to say...there is nothing that can be done) to the problem with my phone.
I am not a technical person...use the phone with still its original settings...rom etc..
today the internet stopped working (maybe connection issue). so I tried to switch off and switch on again. the phone is not starting again...i have tried soft reset, removing the battery, sim card, memory card etc.. no luck
when i press the power on button..i hear the buzz...then the screen lights up with the HTC logo and some numbers at the bottom..which are
R2.04.50.22__2
G15.26.50.07U
D1.43.70124
And then nothing happens...
i have not yet tried the hard reset option..as would not like to loose the details on the phone...if possible. But if it is the only option, i am willing to try.
I will be grateful for your help, and please explain in plain terms if possible..kindly be patient if i do not understand the technical terms..
thanks in anticipation
Hi,
If read your post correctly you have not made any attempt to alter your phone's ROM and it is still as supplied.
Looking at the radio and ROM installed this is probably outside warranty, which is why you are asking rather than returning to your vendor.
This being the case it does not sound like your phone is booting and a hard reset will make any difference.
Will the phone start in the bootloader mode (achieved by turning the power off completely and holding the vol down button while powering up).
This is a tri-colour screen and is restarted by removing the battery.
It sounds like the ROM is corrupt or damaged.
You could try loading the stock rom from your provider or loading one of the very good cooked rom's from this site if it just corrupt.
This process is a bit long winded and will need extra direction if you have not spent any time on this site.
thanks
thanks for the reply waspsl
u r right, i have not changed the rom
and it is out of warranty
it starts in the bootloader mode..i.e i can see the 4colours(includind white) and the bottom says "serial" and then when connected to computer says "usb"
nothing further happens
when i open windows mobile device center, the phone is not connected
what next do i do?
how do i load the rom?
thanks again
amar
hard reset sorted the problem for now(although i lost the data)
thanks