Related
Ok so.. I finally after months flashed my second rom
HAd some trouble, I have to admit..
DC~~
I had trouble and I did some wiping and messing with my SD chip and that was the only way I could functionally get a flash..
I just spent a day and a half setting my phone up to my liking and its become apparent apps2sd isn't working and my SD card only has one 1.5 partition out of 2 gb.
Sorry if there are posts with directions of how to work from this point to keep everything while enabling apps2sd and transfering
I dont know where to start searching.
Thanks guys.
"The noob"
get a app called dconfig, it has an option to move your apps so they're on the card.
other than that im not sure what youre asking.
it might be simpler just to flash your phone, format your card and start from scratch.
Cloned2 said:
Ok so.. I finally after months flashed my second rom
HAd some trouble, I have to admit..
DC~~
I had trouble and I did some wiping and messing with my SD chip and that was the only way I could functionally get a flash..
I just spent a day and a half setting my phone up to my liking and its become apparent apps2sd isn't working and my SD card only has one 1.5 partition out of 2 gb.
Sorry if there are posts with directions of how to work from this point to keep everything while enabling apps2sd and transfering
I dont know where to start searching.
Thanks guys.
"The noob"
Click to expand...
Click to collapse
do some searching on here, goggle & ppcgeeks for how to root, flash a recovery image, partition your sd card and flash a rom. just make sure the guide you are using and the rom you use is for a cdma based hero.
http://forum.ppcgeeks.com/showthread.php?t=90380 heres good guide to get you started.
I'm rooted I might just need to flash the Rom with the SD card.formatted correctly... I'm going to try to re find where the apps are stored and save them... id love to just be able to correct my SD config and set up apps2sd and move em over so I can keep my home screen set up as well as the info supplied in my apps and todo lists..
Thanks for the info ... on the road right now (passenger.seat )
Maybe I'm not a newb, I'm just stupid... I rooted using ubuntu karmic and I had apps2sd working before I moved to damage control
Sent from my HERO200 using Tapatalk
hmm.. Damage control rom comes with Dconfig and it has apps2sd enabled and move apps to sd checked.
Ok heres the thing..
I had a Modaco rom before and with apps2sd enabled and the SD formatted properly.
Plugging my phone into a computer would open up 2 drives... One 1 designated to be 1.5 gb and another .5 gb
How ever now I only see one.. the 1.5 gb
My memory is running low as if everything i've installed is in the phone.
searching through the phone i can't seem to find where these apps are being saved...
Are they on the elusive .5 gb partition I can't seem to see??
i think not... I just rebooted and my available space is 63.74mb
It's all becoming a no brainer that i should reflash the rom with the correct specifications to the SD chip...
But what I want to know, is there a way around this. ( I don't see any options, but I'd love to reformat my SD correctly and get apps2sd working on my own, moving all my apps over there while keeping any stored data intact...) <--- is this possible??
[maybe i should learn how to communicate clearly LOL]
For the moment, Ill back up my SD contents and hunt down how to partition correctly.. then I'll see if I can't find the folders where it is storing downloaded apps... then I'll disable then enable the apps2sd setting in dconfig and download an app... if all goes well i'll start pushing my apps over and do the whol "fix apk uid" in the recovery menu...
Hell maybe ill even decide to get a newer recovery besides 1.2.3 while im at it hahah.. any suggestions would be appreciated
# cd /data/app
# pwd
/system/sd/app
# cd /data/app-private
# pwd
/system/sd/app-private
Click to expand...
Click to collapse
So... Why is my memory so low???
I'm about to take my SD chip out and see if I cannot access the contents of these folders without it in...
MY APPS2SD IS WORKING AND HAS BEEN WORKING
Sorry guys... somethings just up[or rather DOWN] with my memory and my SD card reads differently...
Cloned2 said:
Being a newb SUCKS!
Click to expand...
Click to collapse
There's only one way to stop being a n00b: Learn.
You're doing fine. My suggestion is to not take it all on at once. Focus on one problem, fix it, learn from it and move on to the next one. You'll be a pro in no time.
I would guess that you need to repartition the SD card when moving from one ROM to the next, but I've never really played with apps2sd. See? You know more about it than I do!
download app: quick systems info
to see if your a2sd is working and how much is being used.
use the dconfig to make sure you have dalvik cached moved to sd... reboot the phone.
i am guessing at this....
you say you had a2sd working before with Madaco and could see 2 drives... that sounds wrong to me. if a2sd was working, then you should not see the 2nd drive. you are only able to see the main larger drive and that is it.. the others are used by android and not available to us.
now that you can not see the 2nd drive. sounds like a2sd is working. the app i suggested should confirm for you.
I did get everything working and my memory remains the same when I install applications.... perhaps I could see the second drive because I'm running Linux and/or the way I formatted the sd or the extension...
Sent from my HERO200 using Tapatalk
I think what you are describing is your SD-EXT partition (the a2sd partition you made). If you have a 2GB card and partitioned your card to be .5GB EXT, then it will appear your SD is 1.5GB. You get what I'm saying?
I used to be able to see 2 partitions as well. I think it was only with 1.5 ROMs.
If you want to mount both partitions then all you need to do is reboot into recovery and select the USB mount. Then both partitions will show up.
But you really don't need to mess with that second partition. Go to the market and download Titanium Backup. That will backup all your apps and settings. Restoring is a little annoying to do since you have to click for every app but if you buy the donate version then you don't have to do that.
centran said:
I used to be able to see 2 partitions as well. I think it was only with 1.5 ROMs.
If you want to mount both partitions then all you need to do is reboot into recovery and select the USB mount. Then both partitions will show up.
But you really don't need to mess with that second partition. Go to the market and download Titanium Backup. That will backup all your apps and settings. Restoring is a little annoying to do since you have to click for every app but if you buy the donate version then you don't have to do that.
Click to expand...
Click to collapse
I perfer Backup For Root Users... does the same thing but is free and is one-click one-shot deal.
hi i think i made a crazy mistake... i just rooted my phone..used rom manager, flashed clockwork recovery.. went back into rom manager and did a backup for the stock shipped tmobile software... i decided to partition my sd card not even thinking that all my backup info would be on my SD card... i thought it would go to the internal memory... so now when the phone comes on, the bottom soft keys light up but the phone doesnt come on. please let me know if corrupted my phone or is there a way to fix?
please get back to me. this is scary
stepinmyworld said:
hi i think i made a crazy mistake... i just rooted my phone..used rom manager, flashed clockwork recovery.. went back into rom manager and did a backup for the stock shipped tmobile software... i decided to partition my sd card not even thinking that all my backup info would be on my SD card... i thought it would go to the internal memory... so now when the phone comes on, the bottom soft keys light up but the phone doesnt come on. please let me know if corrupted my phone or is there a way to fix?
please get back to me. this is scary
Click to expand...
Click to collapse
The black screen with lit up touch buttons is just the vibrants way of bootlooping. The problem with using clockwork to partition the SD card is /sdcard is the internal memory. /sdcard/sd is the card itself. Clockwork is actually formatting the internal memory. Might want remove the external sd and partition it back to 1 fat32 drive and see if that will help.
bahnburner said:
The black screen with lit up touch buttons is just the vibrants way of bootlooping. The problem with using clockwork to partition the SD card is /sdcard is the internal memory. /sdcard/sd is the card itself. Clockwork is actually formatting the internal memory. Might want remove the external sd and partition it back to 1 fat32 drive and see if that will help.
Click to expand...
Click to collapse
ok i am going to attempt to do this thank you
bahnburner said:
The black screen with lit up touch buttons is just the vibrants way of bootlooping. The problem with using clockwork to partition the SD card is /sdcard is the internal memory. /sdcard/sd is the card itself. Clockwork is actually formatting the internal memory. Might want remove the external sd and partition it back to 1 fat32 drive and see if that will help.
Click to expand...
Click to collapse
partitioning it back to fat32 didn't work. still just lit bottons and black screen after it has booted up. I think i erased eveything when i partitioned the sd card. i wonder has anyone else ran into this.
Just download jac's nandroid and put on sd card assuming you can still get into recovery..
Sent from my SGH-T959 using XDA App
bildo said:
Just download jac's nandroid and put on sd card assuming you can still get into recovery..
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I can get into recovery but the recovery doesn't access anything besides the internal memory. I can't access the internal memory if if i can't use usb... it doesn't access SD card so placing a file on the card wouldn't help me.
Clockwork does not even access the external sd. You partitioned your internal. You might be able to repartition it from adb if you connect after loading clockwork recovery.
Sent from my SGH-T959 using XDA App
kopykatkiller said:
Clockwork does not even access the external sd. You partitioned your internal. You might be able to repartition it from adb if you connect after loading clockwork recovery.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
nah.. i did chose clock work recovery,partition sd card 564 swap and 30mb i think... i am not sure.. but it did that... i tried to be reboot, it goes by the tmobile logo, then makes the tmobile noise as its on the samsung S part and then it goes to a black screen and lit up soft keys....
im guess stuck. i guess i can confirm this as bricked. ugh
i dont even know how to use adb.. it's difficult
Go into recovery and then use adb to connect and repartition.
Sent from my SGH-T959 using XDA App
kopykatkiller said:
Go into recovery and then use adb to connect and repartition.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
lol yall say this like it's that simple. i wish someone had a little time to direct me to a post on this because one word sentences wont help me. i appreciate the response though. my device isn't even found when i try to so it from adb.
it's ok... im frustrated and been doing this for about 3 hours trying to fix the phone. thanks again
Not that this is a real fix, but try going to T-mo and telling them you have no idea what happened and that it just won't turn on. With any luck you'll get a nice sales rep and they'll give you a new phone.
Sent from my SGH-T959 using XDA App
vinnydakid said:
Not that this is a real fix, but try going to T-mo and telling them you have no idea what happened and that it just won't turn on. With any luck you'll get a nice sales rep and they'll give you a new phone.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Why not just use odin and install a rom.
psychoace said:
Why not just use odin and install a rom.
Click to expand...
Click to collapse
because:
the only access i have is booting into recovery. I can't access the sd card to update it.. there is nothing on the phone. how does partitioning your sd card wipe both the phone and the sd? i backed up the rom via clockwork/rom manager so maybe it was all stored on the sd card and when i went to wipe, it wiped everything.
stepinmyworld said:
because:
the only access i have is booting into recovery. I can't access the sd card to update it.. there is nothing on the phone. how does partitioning your sd card wipe both the phone and the sd? i backed up the rom via clockwork/rom manager so maybe it was all stored on the sd card and when i went to wipe, it wiped everything.
Click to expand...
Click to collapse
Can't you access download mode? You don't need the sd card for that.
psychoace said:
Can't you access download mode? You don't need the sd card for that.
Click to expand...
Click to collapse
please let me know what to press
Installing a rom is not going to fix a repartitioned internal sd issue.
kopykatkiller said:
Installing a rom is not going to fix a repartitioned internal sd issue.
Click to expand...
Click to collapse
yeah i have to probably return the phone. i did download stock shipping software just to try it out maybe
If you have the USB drivers installed, You can use ADB to push files to the sdcard, although it won't be incredibly fast to push an entire nandroid backup over (you may need to mount /sdcard/ and push.
stepinmyworld said:
please let me know what to press
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=728698&highlight=odin
first post
First you need to install ADB. You can find the instructions in the top sticky post on the forum. Once it's installed, download http://www.mediafire.com/?kqaulorzx5f6dyq and unzip it into a folder in your adb folder. (ex: c:\androidtools\tools\) Keep track of the file names in the zip file. Open a command prompt in your adb directory and type "adb devices" to make sure your device is connected. I'm on my phone so I don't have my adb cheat sheet but I think you will type "adb mount /sdcard". Then you will want to push each file to the sdcard. You may be able to do the folder at once but I don't remember. That will be something link "adb push whateverfilename".
These are obviously not the best or most detailed instructions but I'm on my phone... You can read the adb tutorial to find what you are supposed to type exactly. You should be able to figure it out from here.
Hi!
I forgot to format my SD card when I installed android, so I was thinking doing it now (just in case, it might get a little better). Do I connect the phone and do the formating through ''My PC'' ? (I don't have a SD Reader or adapter) Or i will have a problem with that?
I've installed Frankstine, and its very good, but I want to test a few so I choose wich one I keep is there any other cool rom? (I'm looking for some rom with Sense )
Thanks!
you can simply format it from android or CWM. if you format it from windows however make sure you keep FAT32 file system, android doesn't recognize ntfs
Some ROMS write files to the sd card for use with the ROM,so formatting it may cause the ROM to stop working properly.
You should really format your sd card BEFORE you install a new ROM.
After you format it you want to make sure you have the correct partition for the ROM you want to install.
ALWAYS BACK UP YOUR SD CARD BEFORE YOU DO ANYTHING TO IT.
P.S. check my sig for a good sense ROM
Yeah keep backup of everything that you want in a folder on your PC. Do you know what program you need to create an Ext partition with? If you do well then its easy.
But I suggest you buy a card reader - they're not too pricey and they will always come in handy. The easiest way to do it is through MAGLDR (supposedly buggy but I've never had any problems personally) or CWM. I've found that using CWM I would regularly get 'Bad Disk' on Minitool after using it though. Don't do it when you're booted up in a ROM as it might mess up the ROM, and some ROM's that use Data2SD make sure you don't mount your SD card while using it as it will most likely cause your phone to reboot and it won't mount, so its useless basically.
Btw, good to see you getting Android working or your HD2 haha.
Sent from my HTC Vision using XDA App
I recently installed CM 7 to emmc after running it from sd for a year. When I first did the emmc install I used mirage 3/4 but when 7.2 was released I decided to try it. Now I want to install the new mirage kang but when I copy the file to my sd card it's not there when CWM looks for it. I wiped data and cache but every time I have CWM look for the file to install it only finds CM 7.2. Any thoughts?
I tried to search but not being able to search for exact phrases makes it hard to find anything.
[edit] When I get home I'll try reinstalling from the eyeballer card I made. Should I format my non-recovery sd card? I didn't need to use the eyeballer card to install 7.2. What's going on here?
irisclara said:
I recently installed CM 7 to emmc after running it from sd for a year. When I first did the emmc install I used mirage 3/4 but when 7.2 was released I decided to try it. Now I want to install the new mirage kang but when I copy the file to my sd card it's not there when CWM looks for it. I wiped data and cache but every time I have CWM look for the file to install it only finds CM 7.2. Any thoughts?
I tried to search but not being able to search for exact phrases makes it hard to find anything.
[edit] When I get home I'll try reinstalling from the eyeballer card I made. Should I format my non-recovery sd card? I didn't need to use the eyeballer card to install 7.2. What's going on here?
Click to expand...
Click to collapse
Which SD did you put the mirage file on? If you were still using the SD from your SD install, it is not partitioned right to be using with CWM. CWM is expecting just a plain vanilla SD. You may have the mirage file on partition 4 which CWM cannot see.
It was the card from my sd install but I had formatted it when I originally did the emmc install. Also, I used a different card for the emmc install.
What I don't understand is how I updated to 7.2 by putting the file on the sd card and installing it from CWM but when I did the same thing to install the latest Mirage kang it didn't work. I tried toggling the signed requirement in CWM since Mirage isn't signed but it didn't make any difference. Even now that I deleted data and caches and installed Mirage from CWM card the 7.2 file is still on my main sd card and I can't delete it. Do I need to use the CWM card every time I do an update? Could TiBU be causing this?
irisclara said:
It was the card from my sd install but I had formatted it when I originally did the emmc install. Also, I used a different card for the emmc install.
What I don't understand is how I updated to 7.2 by putting the file on the sd card and installing it from CWM but when I did the same thing to install the latest Mirage kang it didn't work. I tried toggling the signed requirement in CWM since Mirage isn't signed but it didn't make any difference. Even now that I deleted data and caches and installed Mirage from CWM card the 7.2 file is still on my main sd card and I can't delete it. Do I need to use the CWM card every time I do an update? Could TiBU be causing this?
Click to expand...
Click to collapse
Do you have your emmc and SD card swapped in CM? You may think you have it on SD but really have it on emmc. And CWM can't see emmc.
No, at least I didn't set it that way. I skipped that part of mr72's guide. Not only that but I tried putting a copy each on my emmc and my sd and it disappeared from the card and wasn't seen on the emmc.
I redid the whole install earlier. I'm going to try putting a Mirage file on the card now and see if CWM sees it.
irisclara said:
I recently installed CM 7 to emmc after running it from sd for a year. When I first did the emmc install I used mirage 3/4 but when 7.2 was released I decided to try it. Now I want to install the new mirage kang but when I copy the file to my sd card it's not there when CWM looks for it. I wiped data and cache but every time I have CWM look for the file to install it only finds CM 7.2. Any thoughts?
I tried to search but not being able to search for exact phrases makes it hard to find anything.
[edit] When I get home I'll try reinstalling from the eyeballer card I made. Should I format my non-recovery sd card? I didn't need to use the eyeballer card to install 7.2. What's going on here?
Click to expand...
Click to collapse
OP, I've tried to help but really, I can't understand your issue, especially this: "I have CWM look for the file to install it only finds CM 7.2"
What else do you expect it looks for and finds?
Anyway, pls do list as much as info so we can help. I don't want to guess.
1. What is your current system? Is it still running fine?
2. I understand you want to update Cm7. Which version?
3. Since you are running CM7 from eMMC, let just focus on 1 uSD, called "flashable CwM Recovery" uSD. Version 3.2.0.1 is preferred.
4. Do list what else (which files) you have on that uSD. (Using windows)
5. Briefly describe how and what shows on the CwM Recovery window
The more info we gather, the better chance we pinpoint to your problem
update-encore_CM72-MiRaGe-03232012.zip and update-cm-7.2.0-RC1-encore-signed.zip have different file names. When I put the Mirage file on the card CWM doesn't see it. Instead it sees the CM 7.2 RC1 file. That's why I was guessing TiBU, because normally when I flash a file it disappears from the card. I flashed CM 7.2 RC but it won't go away, even if I try to delete it. After conducting the experiment from my previous post I am wondering if my flash card is going bad. I'll do further experiments along that line today.
1. What is your current system? Is it still running fine?
update-encore_CM72-MiRaGe-03232012; occasionally says sd card not installed or available
2. I understand you want to update Cm7. Which version?
I wanted to go to update-encore_CM72-MiRaGe-03232012 which I have now accomplished
3. Since you are running CM7 from eMMC, let just focus on 1 uSD, called "flashable CwM Recovery" uSD. Version 3.2.0.1 is preferred.
yes...
4. Do list what else (which files) you have on that uSD. (Using windows)
I'm not sure I understand what you want here but here's a list of what's on the CWM card: folder (.android secure), folder (Android), folder (DCIM), folder (LOST.DIR),gapps-gb-20110828-signed.zip, mlo, u-boot.bin, uImage, update-encore_CM72-MiRaGe-03232012.zip, update-encore-cwm.emmc-eyeballer.zip, uRamdisk
5. Briefly describe how and what shows on the CwM Recovery window
If you are referring to when I run CWM from this card it installs everything fine.When I wrote this question I was trying to flash the Mirage ROM from recovery and after I selected "install from sd" and "choose which file to install" my only choice was update-cm-7.2.0-RC1-encore-signed.zip rather than the update-encore_CM72-MiRaGe-03232012.zip I expected to see.
Thanks for trying to help. Later today I will try copying my data sd card to another card and see if that fixes the programs saying the card is not available. If it does I will assume the other card is bad. Seem reasonable?
irisclara said:
update-encore_CM72-MiRaGe-03232012.zip and update-cm-7.2.0-RC1-encore-signed.zip have different file names. When I put the Mirage file on the card CWM doesn't see it. Instead it sees the CM 7.2 RC1 file. That's why I was guessing TiBU, because normally when I flash a file it disappears from the card. I flashed CM 7.2 RC but it won't go away, even if I try to delete it. After conducting the experiment from my previous post I am wondering if my flash card is going bad. I'll do further experiments along that line today.
Click to expand...
Click to collapse
a. For less complicated, do just put ONE file in the root folder of your CwMR uSD card, not two. Just put the Mirage there, remove the other.
b. FYI, the latest Mirage is also CM7.2-RC1.
2. I understand you want to update Cm7. Which version?
I wanted to go to update-encore_CM72-MiRaGe-03232012 which I have now accomplished
Click to expand...
Click to collapse
So, you're done? all good? I thought you said you cannot perform the update due to file could be found by CwMR.
4. Do list what else (which files) you have on that uSD. (Using windows)
I'm not sure I understand what you want here but here's a list of what's on the CWM card: folder (.android secure), folder (Android), folder (DCIM), folder (LOST.DIR),gapps-gb-20110828-signed.zip, mlo, u-boot.bin, uImage, update-encore_CM72-MiRaGe-03232012.zip, update-encore-cwm.emmc-eyeballer.zip, uRamdisk
Click to expand...
Click to collapse
Ideally, it should only consist of those files that related for boot such "bold" and those flashable zip files. I don't know why those other folders gotten in there. Have this CwMR card being used on any system as storage b4?
5. Briefly describe how and what shows on the CwM Recovery window
If you are referring to when I run CWM from this card it installs everything fine.When I wrote this question I was trying to flash the Mirage ROM from recovery and after I selected "install from sd" and "choose which file to install" my only choice was update-cm-7.2.0-RC1-encore-signed.zip rather than the update-encore_CM72-MiRaGe-03232012.zip I expected to see.
Click to expand...
Click to collapse
If what you listed on 4) above is all correct, then what you see is the Mirage CM7.2 RC1
Well, I guess I have my answer. I tried to format my 16 GB data card and it wouldn't format. Looks like card failure. Unless someone has a better idea I'm just going to order another card and chalk this up to running the OS off the card for so long. If flash memory only has a limited number of read/write cycles that must have burned through them.
Thanks votinh, leapinlar. Any other advice, suggestions, ideas on the situation will be appreciated.
irisclara said:
Well, I guess I have my answer. I tried to format my 16 GB data card and it wouldn't format. Looks like card failure. Unless someone has a better idea I'm just going to order another card and chalk this up to running the OS off the card for so long. If flash memory only has a limited number of read/write cycles that must have burned through them.
Thanks votinh, leapinlar. Any other advice, suggestions, ideas on the situation will be appreciated.
Click to expand...
Click to collapse
Read/write cycle of the flash devices are usually high, 2000+ time, I doubt that you have burnt through.
Anyway, what tool you use to format your uSD?
---------- Post added at 12:04 PM ---------- Previous post was at 12:01 PM ----------
If I was you, b4 purchasing another card, I would try to reformat the card and re-create its flashable CwMR.
If that didn't help, then order new one but note since you only need it for install ROM, 1GB or 2GB is more than enough.
I want at least a 16 GB card for my data and media. I have a 4 GB that I use for CWM and OS testing. I was using the 16 GB card for my OS when I was running off the card. After I installed to emmc I used the 16 GB card for data. The 16 GB is the card that I was having the problem with at the beginning of this thread. Since then I copied everything except my media onto the formatted 4 GB card and everything is running fine. I tried to format the 16 GB card using HPUSBDiskFormat but I got a message "Cannot Format". What program should I be using to format the card?
Other strange things that make me think the 16 GB card was the problem: I recently put some books on the card but they disappeared, one of my apps that is installed on the card keeps disappearing and I have to reinstall it, picture gallery keeps telling me that it can't read the sd, I can't delete files from the card either on the Nook or on my computer.
I hope it isn't the card and you guys know exactly what the deal is but after I put the 4 GB card in place of the 16 GB those problems aren't happening anymore. The final test will be to put an update file on the 4 GB card and boot to recovery. If CWM can see it I can't see how the 16 GB card isn't the problem.
votinh said:
a. For less complicated, do just put ONE file in the root folder of your CwMR uSD card, not two. Just put the Mirage there, remove the other.
Click to expand...
Click to collapse
I am aware of that but I couldn't get the non-Mirage file to delete. I tried but it wouldn't go away.
b. FYI, the latest Mirage is also CM7.2-RC1.
Click to expand...
Click to collapse
I am aware of this. Mirage has different buttons and other tweaks.
So, you're done? all good? I thought you said you cannot perform the update due to file could be found by CwMR.
Click to expand...
Click to collapse
There's CWM on the card and CWM on the Nook. I could not get CWM on the Nook to see the update file on a non-CWM card. Previously it had. I got it to work by reinstalling from my CWM 4 GB card.
Ideally, it should only consist of those files that related for boot such "bold" and those flashable zip files. I don't know why those other folders gotten in there. Have this CwMR card being used on any system as storage b4?
Click to expand...
Click to collapse
This card was formatted with HPUSBDiskFormat before writing CWM to it.
If what you listed on 4) above is all correct, then what you see is the Mirage CM7.2 RC1
Click to expand...
Click to collapse
I am aware of this. The fact that it wasn't working like that is the reason I started this thread.
Thanks for your help.
Now, it's a bit clearer that you have both CwM Recovery.
As I always mentioned and recommended NOT to flash CwMR into eMMC as it causes more headache than good but still many others choose to go that way and report more issue. Anyway, let's put that aside.
First step, reformat your 16GB card using MiniTools Wizard. I wish you luck there, if it can't, toss the card but if it's OK then second step, create a flashable CwMR 3.2.0.1 and put just the Mirage ROM in there.
I'm sure you know what to do.
Let us know how things go.
I may have done a dumb thing in installing CWM to the emmc but I was following a guide and didn't want to screw anything up. The reason I put off the emmc install for so long is that fear of bricking my Nook. So far so good on that front.
That tip about MiniTools is very helpful. I was sure there was something better than what I was using but I didn't know what it was. So far I'm getting very strange results when trying to format the card. The program says that the format worked but the files are still on the card. Surface test didn't show any errors. I tried to remove the old partition and create a new one but while that appeared to work there was no change on the card. I do notice that it wants to format the card in NTFS but I was under the impression that it should be FAT 32.
Is the card trashed? I can't think of anything else to try. I even flipped the lock switch and checked it. Still can't delete anything. I can't even delete a picture that I put on there.
As a last hope I tried putting the 16 GB card in my camera to see if the camera could format it. No luck. If the camera can't do anything with it the card is dead. Oh well, at least I got all my data off of it.
Votinh, do you know of any guide to removing CWM from emmc? It wasn't the problem in this case but it's not necessary. I didn't really want it but I thought that's how flashing worked on emmc. I see now that I can use ROM Manager for that.
irisclara said:
As a last hope I tried putting the 16 GB card in my camera to see if the camera could format it. No luck. If the camera can't do anything with it the card is dead. Oh well, at least I got all my data off of it.
Votinh, do you know of any guide to removing CWM from emmc? It wasn't the problem in this case but it's not necessary. I didn't really want it but I thought that's how flashing worked on emmc. I see now that I can use ROM Manager for that.
Click to expand...
Click to collapse
Honestly, I chose to never flash CwMR into eMMC so I don't have much experience how to remove it, but I'm sure there is way. Will report back if I stumble across any thread about it. NOTE: having CwMR in eMMC is NOT so bad, it just gets you more headache down the road. A lot of people get it installed.
About your card, it's very itchy, ehhhh
Have you actually hit the format button or done or save whatever? and do so with FAT32, not NTFS.
It's first time I've heard the issue.
Yes, unfortunately. I hit format and then the check mark on the far left which I'm pretty sure is save. It certainly said it was doing something and that it had completed the operation successfully. All the files are still on the card though, after 2 formats, one NTFS and one FAT 32, remove and create, and 1 wipe. The files are all still showing on the card and I can't delete any or add any new.
What brand of your 16GB card is it?
I can't imagine that card was extensive damage like that.
Format many times and files still there, amazing.
The card is a Dane Electric from Newegg. I was surprised that it worked as well as it did for running the OS since it's not a SanDisk.
Just bought the parents some nook colors and I've been trying to rom it up with no luck...
The nook came with 1.3.0
These are the steps i took:
I used Win32DiskImager to write the 1gb_clockwork-3.2.0.1-eyeballer.zip image to the boot SD and booted into CWM.
I removed the SD card and formatted it. Then added the rom zip and gapps zip to the sdcard.
I then reset to factory settings, then installed the rom and the gapps, then i reset factory again.
Then i would remove the sdcard and reboot and the rom would start to load...
I tried 3 different roms, cm7 mirage, phiremod and an ics rom... all 3 do the same thing, extremely slow and practically everything force closes... I cant even reboot to recovery, it seems like it stayed on the sdcard and didnt install to the nook...
Noob questions:
Should I have rooted it first?
Does it have to have an sdcard?
What can I do?
Thanks a million in advance!
I don't think this for the "Android Development" subforum.
Anyways.. unless you have a Sandisk Class 4 MicroSD, or cards with similar performance characteristics, you will see stuff like that if you run from SD card because the card is just too damn slow for small writes.
Look for "4k random write" benchmarks. Get a card that scores high on that. It's important for approximately everything that's not a large video.
You can benchmark yourself under Windows with CrystalDiskMark for example.
Edit: Dedicated topic: http://forum.xda-developers.com/showthread.php?t=1005633
dammit, you're right - i could've swore i was in the Q&A forum... can a mod please move this thread?
also, regarding the sdcard quality, I actually want it installed on the nook itself, i dont want to have to depend on an sdcard...
You don't need to root first. You also shouldn't be booting to CWM after burning the image or reformatting afterwards. Your description is vague so it sounds like you may be trying to make a bootable SD card instead of installing the ROM internally. Certainly the crashing issues sounds like a slow SD card running a bootable ROM.
To install internally start with a freshly formatted card. Burn the 3.2.01 CWM image to the card. Then copy and paste the ROM zip (CM7, CM9, MIUI or whatever) and the Google apps zip files on the card. Do not unzip the files and do not put them in any folder.
Safely eject the card from the pc, insert it into the Nook and power up. Wipe data/system, clear the cache partition, go to advanced and wipe the dalvik cache. This ensures you are totally clean for the ROM.
Next choose install zip from SD card. Then flash the ROM zip. Choose install zip from SD card again and flash the Gapps zip. Then unmount the card in the menu and remove the card and choose reboot. Or you can hold the power button for a few seconds to power down, remove the card and then power up.
You should now be in your new ROM installed to internal memory. Follow the official thread for the detailed instructions.
JP
nando99 said:
dammit, you're right - i could've swore i was in the Q&A forum... can a mod please move this thread?
Click to expand...
Click to collapse
Gotcha covered.
J515OP said:
You don't need to root first. You also shouldn't be booting to CWM after burning the image or reformatting afterwards. Your description is vague so it sounds like you may be trying to make a bootable SD card instead of installing the ROM internally. Certainly the crashing issues sounds like a slow SD card running a bootable ROM.
To install internally start with a freshly formatted card. Burn the 3.2.01 CWM image to the card. Then copy and paste the ROM zip (CM7, CM9, MIUI or whatever) and the Google apps zip files on the card. Do not unzip the files and do not put them in any folder.
Safely eject the card from the pc, insert it into the Nook and power up. Wipe data/system, clear the cache partition, go to advanced and wipe the dalvik cache. This ensures you are totally clean for the ROM.
Next choose install zip from SD card. Then flash the ROM zip. Choose install zip from SD card again and flash the Gapps zip. Then unmount the card in the menu and remove the card and choose reboot. Or you can hold the power button for a few seconds to power down, remove the card and then power up.
You should now be in your new ROM installed to internal memory. Follow the official thread for the detailed instructions.
JP
Click to expand...
Click to collapse
thanks, but thats the problem, once i burn the cwm img to the sdcard, i cant add anything else to it... no rom, no gapps... i'm using the Win32DiskImager to burn the cwm img to the sdcard... where am i messing this up? thanks again!
nando99 said:
thanks, but thats the problem, once i burn the cwm img to the sdcard, i cant add anything else to it... no rom, no gapps... i'm using the Win32DiskImager to burn the cwm img to the sdcard... where am i messing this up? thanks again!
Click to expand...
Click to collapse
Are you using an internal card reader to burn the image? Use a cheap usb card reader. And be sure to use win32diskimager in administrator mode.
Sent from my NookColor running ICS and Tapatalk
i'm using a laptop with a built in card reader... and i am using win32diskimager in administrator...
nando99 said:
i'm using a laptop with a built in card reader...
Click to expand...
Click to collapse
What @leapinlar is saying is that the built in reader is part of the problem. Get a little <$5 reader and use that to make the SD card.
The problem is the OP doesn't provide enough info. Before we offer help, pls do tell us what your intention?
1. Install CM? into eMMC (a.k.a. internal memory) or
2. Run CM? from uSD (a.k.a. external memory card).
Provide solid info then you will get more help that lead you to the right direction.
votinh said:
The problem is the OP doesn't provide enough info. Before we offer help, pls do tell us what your intention?
1. Install CM? into eMMC (a.k.a. internal memory) or
2. Run CM? from uSD (a.k.a. external memory card).
Provide solid info then you will get more help that lead you to the right direction.
Click to expand...
Click to collapse
nando99 said:
... I actually want it installed on the nook itself, i dont want to have to depend on an sdcard...
Click to expand...
Click to collapse
And at this point I think he just wants whatever CM will work.
MISRy said:
What @leapinlar is saying is that the built in reader is part of the problem. Get a little <$5 reader and use that to make the SD card.
Click to expand...
Click to collapse
so the internal card reader is the reason i can't copy files to the sdcard after i write an img to it?
votinh said:
The problem is the OP doesn't provide enough info. Before we offer help, pls do tell us what your intention?
1. Install CM? into eMMC (a.k.a. internal memory) or
2. Run CM? from uSD (a.k.a. external memory card).
Provide solid info then you will get more help that lead you to the right direction.
Click to expand...
Click to collapse
I want it installed into eMMC (internal memory)
nando99 said:
so the internal card reader is the reason i can't copy files to the sdcard after i write an img to it?
Click to expand...
Click to collapse
Maybe. Others have had problems using an internal reader. Just try a cheap usb card reader and see.
Sent from my NookColor running ICS and Tapatalk
ok... so i'm i just used an external scard reader and the same thing is happening...
once i write the cwm img to the sdcard it makes it a bootable sdcard and i can access it or move files to it...
I have installed phiremod 7.2 on another nook color and it wants to close android.process.media. Force closes. And it doesn't have the status bar either. When I try to go to Play Store, it force closes android.process.media again. Any help?
Sent from my Nook Color running CM7/Phiremod v7.2, using xda premium
yeah same thing happened 2 me... everything would force close and i had no status bar smh...
Hey nando99, try gryphon101's solution. Couldn't hurt.
gryphon101's solution?
gryphon101 said:
...I had the cwm image on my 8gb sd.. correctly. BUT also had the ROM zip and GAPPS zip on the very same card! somehow the clockworkmod would get stuck. I started over with the cwm image on one card, and the zips on another one... worked fine then.
Click to expand...
Click to collapse
thats how i did it initially... i'd write the img to the sdcard, boot up in cwm no problem... take out the sdcard, format it, put the roms in the sdcard, then put the sdcard back in the NC... install the zips... installed fine... then massive force closes... i will try again, when i get home...
And we are using CWM 3.2.0.1...