Database Users

MT3G Fender w/ wrong bootloader!! No skateboarding androids!! PLZ HELP!!!!

Let me explain to you the whole story. I obviously know im going to get flamed for this one. I will give you the short short version
I had a rooted MT3G fender with this Rom installed
http:/forum.xda-developers.com/showthread.php?t=669911
It worked all good until i started messing with stuff. I wanted this rom installed
http:/forum.xda-developers.com/showthread.php?t=673394
Since it said 32a and MT3G fender is 32a i assumed that it will install and no problems. So i used the gold card to change radio and spl to the 3.22 series. only to find out that they dont work for my phone. based on this post
"You are now screwed with a downgraded SPL and radio that do not work on this phone YAAAAAAY." -crypysmoker-
[THUNK AND FIXED] Rooting Mytouch Fender LE 32a/ Mytouch 1.2 DONT!!
http:/forum.xda-developers.com/showthread.php?t=622530
So now im thinking great i didnt catch that so let me just move back to where i was before. using the last section of that previous thread to install the stock radio and spl. i have done this already and know it works. so i install the stock radio and spl and the custom recovery. Boot up into recovery and restore nandroid. everything is going ok utill.....it locks up in a boot loop. i then boot back up into recovery and erase data. after that i tryed another nandroid restore and to my wonderful surprise i now lost the ability to mount the sdcard. i restarted and tryed many different cards and all failed. I then boot up into hboot restore with the goldcard and it then locks up at system.
Great now im looking for something to fix this whole mess. after that i try to reinstall the original spl and radio. I then have an error "signature verify failed." Now im thinking WTF!!!!!
I then find a thread about the RUU and how to turn off "S-on" if i install this official HTC app. However come to find out its the asia version. WONDERFUL FOR ME!!! I then found the Official T-mobile MT3G RUU, installed it and now i have a fastboot installed with a memchip with a red circle around it, not the 3 skate droids, and cant boot into HBOOT ,with the volume down button. All that i see is "RUU USB." I have adb but now get the error "remote not allowed." it used to be "signature verify failed." i have no recovery, no HBOOT, just fast boot with RUU USB.
How to i fix this mess up and get back to this?
T-Mobile MyTouch 3g Fender Edition Stock ROM with ROOT!
http:/forum.xda-developers.com/showthread.php?p=5451898&posted=1#post5451898
This is what i have and show
Sapphire pvt 32a ship s-on G
Hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
RUU USB
This is definitely a snowball effect right here.
Oh also i cant go and exchange the MT3g fender because im past my 14 days and i already did it on the first day. LOL

I actually am stuck on the same screen with the same phone. I hope someone has been able to get this fixed

Damn, not trying to be mean, but you screwed up a lot.
I have the same version device as you, and I upgraded my radio/SPL. and did a lot of stuff, i semi-bricked it, but i got it working again. I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Try following this theunlockr[DOT]com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/

The problem is that the phone is stuck in a bit of an interesting state. You can't flash from an RUU at this point because the engineering SPL used to root the phone is version 2.53.x, while the RUU's ROM is 2.10.x. You also cannot flash any images to the phone because the SPL is locked (S-ON). So the only way to fix the phone at this point would be to somehow get an HTC-signed 2.53+ ROM for the SAPP31000 (mytouch 3g 1.2/fender) or find a way to unlock the SPL. I had a nice chat with some of the Modaco guys and we went through a lot of options with none of them working. The phone's basically in a bit of a chicken vs. egg state. So personally, I will be building a serial cable to manually unlock the SPL so that I can flash images back on manually.
So, while I wish it was as easy as just re-flashing the phone, you can't do that with a locked SPL and no HBOOT mode available. Onward to a serial/TTL cable advendure!
Once I get the parts in to build it, I'll follow up here with my results
shintokun said:
I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Click to expand...
Click to collapse

[Solved] So I screwed up [CyanogenMod to modded Rogers]

So first some background:
I have an original 1.5 Rogers HTC Magic phone. I applied the 911 update to it when it was pushed out from Rogers. It was then flashed following the CyanogenMod6.0-RC directions from their Wiki and had been working well enough up until recently.
Rogers released their 2.1 and so I decided to give it a whirl.
Downloaded RCMagic Rogers RUU 3.54.631.3 Android 2.1 for magic+ ( [Rom][NR][32A]RCMagic v5 710Mhz OC WIFI Working |Rogers 2.1[Oct 10] ) and attempted to apply it via the ClockworkMod Recovery. Am now stuck at the HTC MAGIC splash screen. It just sits there. So I tried flashing the CyanogenMod zip I had left on my SD card and am having the same issue.
Booted up in fastboot and have the following info
Code:
SAPHIRE UNKNOWN 32a ENG S-OFF H
HBOOT-1.33.2005 (SAP50000)
CPLD-12
RADIO-3.22.20.17
Apr 20 2009, 15:30:43
I suspect I screwed the pooch somewhere, though I'm thankful I can still get into both fastboot and Clockwork Recovery.
And of course, I was silly and didn't make a nandroid backup once I got everything in place the first time.
So how do I get myself back to a working phone? I couldn't find anything that would get me going where I needed, and really am just more confused.
If it makes a difference I'm running Windows7 on my PC (it's always been a pain using HTC/Rogers RUUs due to that).

Did you do a full wipe first? data/cache/dalvik?

I hadn't before I posted, no. But I just performed both Wipe options in Clockwork and I'm still hanging at the HTC MAGIC splash.
I'd be willing to bring the phone back to stock and work up from there if necessary. At least I'd be somewhere!

babillon said:
I hadn't before I posted, no. But I just performed both Wipe options in Clockwork and I'm still hanging at the HTC MAGIC splash.
I'd be willing to bring the phone back to stock and work up from there if necessary. At least I'd be somewhere!
Click to expand...
Click to collapse
you have wrong radio... for that rom u need 6.35 radio...
check this: http://forum.xda-developers.com/showthread.php?t=794450

I noticed that last night before I went to bed.
I tried running that program as well, in fact. Though it failed to put the new radio over.
Any attempt to use it resulted in a failure message. fastboot shows that it is receiving the package but once everything gets to the phone the Switcher shows it as failed.

Update! After using the Radio Switcher Tool at work on an XP machine all is now well.
For some reason the updates wouldn't push to the phone from my Windows7 machine but then again, I've always had finicky issues like that with it.
So I'm not running the new mod and everything is working wonderfully.

[Q] Have i killed my htc magic? *radio rom update failure*

Hi,
I am not all that new to rooting / flashing i've had a lot of experience but i think i've made a school boy error.
I rooted a HTC Magic last night and added the 1.5 Hero Rom.
this morning i looked for a later ROM and i found one from the unlockr.
the issue with this was that it required a radio flash. My 32B Magic is now flashed to 32A and i cannot even get into recovery mode OR re-flash the radio.img i had originally through fastboot.
Upon boot the Magic just comes up with the Mytouch 3G spash screen and nothing else.
Details:
Rooted using gold card method, fine.
Hero rom installed: fine.
Updating the ROM however, the radio was flashed to 32A and now i cannot get back into recovery mode.
Is there anything i can do? has anyone seen this before? I really don't want to keep using the motorola dext, sorting this magic out will make me happy.
Please help.
thanks.

you cant go in fastboot mode???

[edit]No, I can get to fastboot, i can get the opening my touch splash up but nothing is working from there. i've tried the arab rom but i can't get my pc to recognize. there has to be a way to flash this back...
[edit] update - Attempted to flash stock 32B Radio to get rid of the 32A that i think's causing the issue - fastboot flash radio.img... Sends radio OK but hangs on Writing radio, I get a black screen on the device. didn't work.

I don't want to ruin the mood any more than it is now, but I did practically the same thing; flashed 32B radio onto 32A Magic, and it was unrepairable in my country. Sold it for parts a few weeks later and got another one.
No fastboot, no boot at all, nothing. All that I was able to get was the blue led mode (trackball + power), and the only repair method was JTAG, which wasn't available to me.

That sucks.
From what I can gather this very well might be dead but everything I can find tells me as long as i can get into fastboot there must be something i can do.
At the moment I can use fastboot and HBOOT but i'm unable to get to a recovery or flash a stock radio.
so far i've tried every recovery/radio i can get my hands on. Hope i'm missing something and somebody is able to help.
flashing 32B to 32A does make me feel a bit spastic to be honest. it's a mistake I can never repeat with anything!

http://forum.xda-developers.com/showthread.php?t=754565
Try posting your thread again in the correct section.
EDIT: Tis the season and junk. I was about to move this to the TRASH but I took pity on you. I moved your thread to the correct section but the next new post that you create in the Development section that isn't related to development will be trashed. Final warning.

Appreciated, My bad. It's been a long and overly tiring day.

Info if it helps:
Sapphire PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
RADIO-6.35.16.19
Tried flashing official rom, nothing.
I got ID Failed, same when i try usinb sappimg in hboot.
radio now half installs but failes on ID.
Felt i'd add to this in case anyone has any ideas.
cheers.

Hi,
I recommend that you download this switcher (http://forum.xda-developers.com/showthread.php?t=794450&highlight=eyegor). Only to use the files (HBOOT, RADIO and REVOVERY), again ONLY because of the files.
After download reboot on fastboot mode and flash: HBOOT, RADIO and RECOVERY, using this sequence.
Good luck,

I'm not sure if this will deal with 32B Magic that's been flashed to 32A but i'll give it a shot. thanks.

Unfortunately there was no luck with that or the Arabic RRU, The GUI Switcher method to flash the radio failed, now phone won't even turn on.
If it wasn't a brick before, it sure as hell is now. i'll chalk this one up as a mistake i think and just be more careful in future.

A little help would be great.

So my wife just upgraded her phone and i was left with a stock MyTouch 3g with 3.5mm headphone jack and I thought I would expand my Android knowledge base and see what I could do with it. I am not knew to Android and I have a Samsung Vibrant that I can pretty much do whatever I want with. The Galaxy line is extremely easy compared to this device.
So I did my fair share or reading and research and was able to root the phone with Universal Androot and installed busybox via titanium backup. I downloaded ROM manager from the market and flashed clockwork recovery. I used recovery to installl CM 5.0.8 DS and once it reboots in wont load past the mytouch splash.
This is what I started with:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-2.22.23.02
Oct 21 2009, 22:33:27
And this is what it reads now:
SAPPHIRE UNKNOWN 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Jun 2 2009, 17:27:03
I read that Binary said that it is really a 32B not an A so to stick with the B ROMs. I can also access fastboot and recovery.
The easy part with the Vibrant is that if I screw up the phone you can just simply Odin back to stock and start over, but the mytouch is a little more complex than that. So basically I want to get back to stock and start over. There are so many threads and links that say user friendly but I didn't find it quite user friendly. I must just be spoiled with the Galaxy.
Any help would be greatly appreciated. It's not a rush or it's not my daily driver. Just a toy phone now to learn on.
Thanks!

mod edit because of inaccurate information.

So you are saying if I just follow the normal root guide for the fender 1.2 that I should be good?
Sent from my GT-I9000 using XDA App

CBATESY said:
usually any of the 3.5mm jack phones are 32a devices. 32b is the original mt3g. ones with the jack in the top is a mt3g 1.2 or 32a. If you have recovery working you can use that to restore back to factory or installed sapping.img
here something to help you out .
http://wiki.cyanogenmod.com/index.php?title=HTC_Magic
Click to expand...
Click to collapse
NO! Damn it! Listen to me everybody! The 1.2 device (Fender, etc) are a 32A/32B hybrid. The ONLY thing that makes this phone ANY different than the regular 23B MyTouch devices is the additional ram. That's it! You CANNOT fit a 32A ROM on the device because it lacks the internal storage. Even if you COULD the kernel for that rom would require a 32A radio. You cannot use a 32A radio because the 1.33.0013 32A s-ON spl requires the 32B radio. And it requires a 32B radio else it will brick. The 1.33.0013 is the S-ON stock SPL that the phone requires to use the memory map. If you try the Engineering SPL (1.33.2010 32B S-ON) the phone might boot, but you will not have touch screen or the use of the headphone jack because of the different drivers and memory map. When you flash the Engineering SPL it will read 32B because that is what is needed to flash the custom recovery and roms. However your device will not work properly because it's a 32A/32B hybrid. You need the 32A stock firmware (1.33.0013 S-ON) for the phone to operate. You also need the appropriate 32B radio and rom as well.
I have the phone and I've had it since it's release. I started off by making custom roms for it and ports before roms were using VoxLuna's driver patch. Trust me when I say that I know a little about this damn phone!
You know what... to hell with it. Do whatever you want. Don't be sending me private messages begging for help when you brick your device because you think it's a 32A.
custom ported rom #1
custom ported rom #2
custom ported rom #3
custom rom #1
They all require 1.33.0013 S-ON with 32B radio.

offdutyninja808 said:
SAPPHIRE UNKNOWN 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
Click to expand...
Click to collapse
The problem. You forgot to mention that you also flashed a non-perfected SPL at some point before flashing CM 5.0.8. You need to get that fixed. Luckily you can fix it without a goldcard since you've already got S-OFF.
Download these:
hboot.nb0 for myTouch 1.2 only
Amon Ra 1.7.0-G Recovery
Go to this URL and follow the steps to get ADB setup if you don't already have it. Then go here and follow steps 7, 8, and 9. In step 7, you should only need to run:
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
After that just reflash CM 5.0.8, although I'm using CM 6.1 and it's just as good, but with the perks of Android 2.2. I would suggest reading through that thread I linked to get more familiarity.
Lastly, I will warn you that this isn't the easiest way to get your phone fixed, but this is the way that I learned about my phone, so it should help you out in that aspect. I'm sure mumilover or someone else may come along with a simpler solution.
If you have any problems, let us know here.

Binary100100 said:
NO! Damn it! Listen to me everybody! The 1.2 device (Fender, etc) are a 32A/32B hybrid. The ONLY thing that makes this phone ANY different than the regular 23B MyTouch devices is the additional ram. That's it! You CANNOT fit a 32A ROM on the device because it lacks the internal storage. Even if you COULD the kernel for that rom would require a 32A radio. You cannot use a 32A radio because the 1.33.0013 32A s-ON spl requires the 32B radio. And it requires a 32B radio else it will brick. The 1.33.0013 is the S-ON stock SPL that the phone requires to use the memory map. If you try the Engineering SPL (1.33.2010 32B S-ON) the phone might boot, but you will not have touch screen or the use of the headphone jack because of the different drivers and memory map. When you flash the Engineering SPL it will read 32B because that is what is needed to flash the custom recovery and roms. However your device will not work properly because it's a 32A/32B hybrid. You need the 32A stock firmware (1.33.0013 S-ON) for the phone to operate. You also need the appropriate 32B radio and rom as well.
I have the phone and I've had it since it's release. I started off by making custom roms for it and ports before roms were using VoxLuna's driver patch. Trust me when I say that I know a little about this damn phone!
You know what... to hell with it. Do whatever you want. Don't be sending me private messages begging for help when you brick your device because you think it's a 32A.
Click to expand...
Click to collapse
And I thought the Vibrant forums were hostile. I am glad that you have had your phone for so long and I am quite sure you know what you are talking about. Like I stated, this phone is just sitting around the house collecting dust and thought I would mess with it. If I brick it... great. If I make it the fastest MyTouch it can be... great.
Don't get me wrong, I appreciate what you and all the other developers and contributors do for random users like myself, but give a guy a break. You have to admit that this phone is a little dated and it's like knowing how to run Windows Vista and 7 then going back to do the same things on a Commadore.

DonJuan692006 said:
The problem. You forgot to mention that you also flashed a non-perfected SPL at some point before flashing CM 5.0.8. You need to get that fixed. Luckily you can fix it without a goldcard since you've already got S-OFF.
Download these:
hboot.nb0 for myTouch 1.2 only
Amon Ra 1.7.0-G Recovery
Go to this URL and follow the steps to get ADB setup if you don't already have it. Then go here and follow steps 7, 8, and 9. In step 7, you should only need to run:
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
After that just reflash CM 5.0.8, although I'm using CM 6.1 and it's just as good, but with the perks of Android 2.2. I would suggest reading through that thread I linked to get more familiarity.
Lastly, I will warn you that this isn't the easiest way to get your phone fixed, but this is the way that I learned about my phone, so it should help you out in that aspect. I'm sure mumilover or someone else may come along with a simpler solution.
If you have any problems, let us know here.
Click to expand...
Click to collapse
Exactly, all he needs is a custom G recovery (which he should have) and then flash the 1.33.0013 stock spl BACK on. Afterwards, he can flash any 32B rom he wants and it should work as long as it's later than CM-4.2.15.

DonJuan692006 said:
The problem. You forgot to mention that you also flashed a non-perfected SPL at some point before flashing CM 5.0.8. You need to get that fixed. Luckily you can fix it without a goldcard since you've already got S-OFF.
Download these:
hboot.nb0 for myTouch 1.2 only
Amon Ra 1.7.0-G Recovery
Go to this URL and follow the steps to get ADB setup if you don't already have it. Then go here and follow steps 7, 8, and 9. In step 7, you should only need to run:
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
After that just reflash CM 5.0.8, although I'm using CM 6.1 and it's just as good, but with the perks of Android 2.2. I would suggest reading through that thread I linked to get more familiarity.
Lastly, I will warn you that this isn't the easiest way to get your phone fixed, but this is the way that I learned about my phone, so it should help you out in that aspect. I'm sure mumilover or someone else may come along with a simpler solution.
If you have any problems, let us know here.
Click to expand...
Click to collapse
Thank you for the non-violent approach. I know how it is when you have a new guy just blowing his phone up and he goes screaming for help. Not what I was trying to do. Just tinkering with a new device to get some more know-how under the belt.
Much appreciated, Don!
I will let you know what I can get accomplished with your advice.

offdutyninja808 said:
And I thought the Vibrant forums were hostile. I am glad that you have had your phone for so long and I am quite sure you know what you are talking about. Like I stated, this phone is just sitting around the house collecting dust and thought I would mess with it. If I brick it... great. If I make it the fastest MyTouch it can be... great.
Don't get me wrong, I appreciate what you and all the other developers and contributors do for random users like myself, but give a guy a break. You have to admit that this phone is a little dated and it's like knowing how to run Windows Vista and 7 then going back to do the same things on a Commadore.
Click to expand...
Click to collapse
He wasn't fussing at you, he was getting at the other guy for feeding you false information.
Sent from my HTC Magic using Tapatalk

My apologies, Binary. Following forums over time you tend to see so much hostility over pretty much nothing. It's a learning experience. Just as I had to learn my other phone, some things the hard way, I will be able to steer people in the right direction and help others after I get this one down.

offdutyninja808 said:
And I thought the Vibrant forums were hostile. I am glad that you have had your phone for so long and I am quite sure you know what you are talking about. Like I stated, this phone is just sitting around the house collecting dust and thought I would mess with it. If I brick it... great. If I make it the fastest MyTouch it can be... great.
Don't get me wrong, I appreciate what you and all the other developers and contributors do for random users like myself, but give a guy a break. You have to admit that this phone is a little dated and it's like knowing how to run Windows Vista and 7 then going back to do the same things on a Commadore.
Click to expand...
Click to collapse
I'm not trying to be hostile but all of the information is available here in the forums. The developers, senior members and moderators like myself have spent HUNDREDS OF HOURS making sure it can be referenced one way or another. They are in stickies and even in MY SIGNATURE. The only other thing we can do for you is do it ourselves! Yet even with a clean and clear explaination this still comes up. We even get some people that post threads saying that they bricked their phones because they thought for sure it was a 32A and they try to hold me responsible. I will be happy to forward some hateful e-mails to you that I get at least 2 or 3 times a week average because people couldn't find the information... yet... if they followed rule #1 of the forums... they wouldn't have the problem.
Look... at least you got the right information and avoided bricking your phone. But I really hate repeating myself over and over again with the same information so I need to be tougher to get my point across otherwise other members will likely use the wrong information and end up breaking their phones... which I will not be held liable for!

DonJuan692006 said:
He wasn't fussing at you, he was getting at the other guy for feeding you false information.
Sent from my HTC Magic using Tapatalk
Click to expand...
Click to collapse
Right on Don. I'm not angry at you OffDutyNinja808 however the other guy (CBATESY) should be warned that I could give him an infraction for giving out bad information.

Binary100100 said:
Right on Don. I'm not angry at you OffDutyNinja808 however the other guy (CBATESY) should be warned that I could give him an infraction for giving out bad information.
Click to expand...
Click to collapse
On another note, Don, I made a new sticky thread just for this issue.
Feel free to add your wisdom to it.
http://forum.xda-developers.com/showthread.php?t=893004

Okay... so I followed Don's instructions and the phone now says:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23. 02
I tried flashing the same CM and it gets past the mytouch splash but doesn't go past the next loading X screen.
From what you guys said everything is looking right. Any thing look out of ordinary or sound crazy from what i'm saying?
Thanks again!
Sent from my GT-I9000 using XDA App

offdutyninja808 said:
Okay... so I followed Don's instructions and the phone now says:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23. 02
I tried flashing the same CM and it gets past the mytouch splash but doesn't go past the next loading X screen.
From what you guys said everything is looking right. Any thing look out of ordinary or sound crazy from what i'm saying?
Thanks again!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Loading X screen?
What rom are you trying to install?
What kernel?

And now i'm in like tube socks! I just woke up and tried it again and it booted right up.
Binary, it was the same CM 5.0.8-DS. As far as the kernel goes, I didn't flash any separate. The X boot screen I mentioned is the Nexus One load screen (I believe).
The only thing that I did differently this morning was wipe/factory reset, then davlik.
Okay... so from my understanding now:
I have to have a perfected SPL, not an engineering SPL.
I have to use the custom (AMAN RA) recovery and never use ClockworkMod.
Ensure that any other roms I want are 32b.
Now as far as the radio goes, is it best to stay with the radio it came with?
Again, thanks for the advice!
Sent from my GT-I9000 using XDA App

DonJuan692006 said:
The problem. You forgot to mention that you also flashed a non-perfected SPL at some point before flashing CM 5.0.8. You need to get that fixed. Luckily you can fix it without a goldcard since you've already got S-OFF.
Download these:
hboot.nb0 for myTouch 1.2 only
Amon Ra 1.7.0-G Recovery
Go to this URL and follow the steps to get ADB setup if you don't already have it. Then go here and follow steps 7, 8, and 9. In step 7, you should only need to run:
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
After that just reflash CM 5.0.8, although I'm using CM 6.1 and it's just as good, but with the perks of Android 2.2. I would suggest reading through that thread I linked to get more familiarity.
Lastly, I will warn you that this isn't the easiest way to get your phone fixed, but this is the way that I learned about my phone, so it should help you out in that aspect. I'm sure mumilover or someone else may come along with a simpler solution.
If you have any problems, let us know here.
Click to expand...
Click to collapse
Don, two things...
1. I searched through the ROM bible and didn't find any place to download 6.1.
2. When I try to download the Google Apps from the page you sent me the link to yesterday, it asks for a user name and password. I have 5.0.8 up and running, but with no market and things like that.
Thanks!

Okay... I am now running FroyoRedux-1.9.5 with the Galaxy theme. Everything is smooth as butter.

I fixed the links in the post I pointed you to and updated them to what you news for CM 6.1
Sent from my HTC Magic using Tapatalk

offdutyninja808 said:
And now i'm in like tube socks! I just woke up and tried it again and it booted right up.
Binary, it was the same CM 5.0.8-DS. As far as the kernel goes, I didn't flash any separate. The X boot screen I mentioned is the Nexus One load screen (I believe).
The only thing that I did differently this morning was wipe/factory reset, then davlik.
Okay... so from my understanding now:
I have to use the custom (AMAN RA) recovery and never use ClockworkMod.
Now as far as the radio goes, is it best to stay with the radio it came with?
Again, thanks for the advice!
Click to expand...
Click to collapse
You can use clockwork. I use it without any problems. Some people like AmonRa better though. If you run CM6 there have been issues about people not being able to flash the recovery for some reason. Just keep trying and it will stick eventually. Just make sure that you flash the one for MyTouch/Ion devices.
Radio - keep the one that your using.
Roms - 32B ONLY

Little help - HTC Magic 32A Rogers

Hello,
I am kind of new to this whole modding thing so I am googling stuff and searching a whole bunch of stuff but it is just leading me in circles.
Allow me to first of all explain my phone. It has the 2.1-update1 from Rogers on it.
Details
SAP PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP50000)
CPLD-12
RADIO-6.35.16.19
And I want to put Yoshi Froyo (or any good android 2.2).
So I looked at a bunch of articles and started following one (http://forum.xda-developers.com/showthread.php?t=756918) and I got my phone rooted (with superuser permissions and all that jazz).
Okay cool, so now I need a recovery image. I installed the one listed (Recovery-RA-hero-v1.6.2.img) and then I restarted my phone and went into recovery just to make sure it worked, and it did.
Okay so now I went to the thread and read it all and found some instructions
"-Make sure you have the .27.08 or .28.25 radio and .0013(d) spl... if not see extras...
-Superwipe twice
-Recovery wipe the list twice
-install ROM
-Enjoy ^__^"
So now I know I don't have a .27.08 radio and I don't know what spl I have, but I assume I don't have that one either. So I go to http://forum.xda-developers.com/showthread.php?t=909900 as it said and read it, but here is where I become confused.
Do I need to downgrade to 1.5 or 1.6? Or can I do it from 2.1? I tried following (http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/) and the SAPPIMG.nbh came up invalid, so then I tried another one and it also came up invalid.
So here is my question, do I need to downgrade in order to install a custom rom? I've read a bunch of conflicting material and I don't have any desire to brick my phone. Some say I do some say I don't.
Any help? thanks!

Well first of all you have a diff radio then most of us cause of rodgers. And the 2708 is a dream radio not magic same with the spl you mentioned. As long as you have root you can custom rom.
And I would recommend cm6.1 stable I find it more stable then yoshi's right now I like yoshi's but I think it still has a little way to go.
Sent from my HTC Dream using XDA Premium App

I know it's a magic cause it does not have a keyboard. I bought it with cupcake on it and then I got the Rogers Sense UI Rom update to android 2.1-update1 and then I got the 911 fix.
Edit: I got HBOOT-1.76.2007 with S-OFF on my phone by following http://forum.xda-developers.com/showthread.php?t=756918
Now I am trying to get the 3.22 rom on it and when I load up fastboot usb it shows the device in my device manager "Android Bootloader Interface" but it won't show up in fastboot.

nvm I had everything I needed already, I simply put on CM6 and it worked.