Hi,
I got this problem with the phone canvas not showing up. I'm wondering if there's some easy fix for this. Been searching all over and haven't come across any post related to this.
Oh, it's not really blank though. When I press where the contacts or recent numbers usually are, they would pop up.
Thanks.
Check if it is enabled with Advanced Configuration Tools.
Phone => Phone skin => Enabled (advised)
scooper said:
Hi,
I got this problem with the phone canvas not showing up. I'm wondering if there's some easy fix for this. Been searching all over and haven't come across any post related to this.
Oh, it's not really blank though. When I press where the contacts or recent numbers usually are, they would pop up.
Thanks.
Click to expand...
Click to collapse
This usually happens when you forget to cook a dependancy of the dialer. For example, with the Oboe dialer, you need 3 other packages as well...
thecrazyman64 said:
Check if it is enabled with Advanced Configuration Tools.
Phone => Phone skin => Enabled (advised)
Click to expand...
Click to collapse
Thanks for the suggestion.
kristofpetho said:
This usually happens when you forget to cook a dependancy of the dialer. For example, with the Oboe dialer, you need 3 other packages as well...
Click to expand...
Click to collapse
Playing around for a while and finally found that Phone Canvas needed PTT package.
Thanks!
Related
Hi all my friends,
I have got a problem..
Installing xplode-HTCHome.v2_1_1005722_s0-all_device.cab , on the today screen I get no "Favorite People" tab.
I hard resetted and reinstalled the cab but no luck... As far as I remember an older version I was using time ago showed the tab correctly...
Is this a known problem with this version? I used this because it seems to be the latest available..
Is there a workaround or a solution for this "little" problem?
Thank you all so much in advice,
Eth
Make sure your "Favorite people" tab is enabled
Start-->Settings-->Today-->HTC Home (bottom tabs)
There should be a checkmark on the favorite people tab.
PoGa
Yes mate, It is checked. That's the strange thing...
Thank you,
Eth
Are you using WM6 with the cube? The favorite people tab will not show up on Home if the cube is also used.
szfjcr said:
Are you using WM6 with the cube? The favorite people tab will not show up on Home if the cube is also used.
Click to expand...
Click to collapse
Yes WM6 with FTouchFlo (also if I deactivate it, people won't show up).
Any workaround?
Thank you,
Eth
I had the same problem, and I had the cube installed. As soon as I uninstalled the cube, the favourites came back (after a reboot I think).
Hope this is of some use.
Do a search their is a mask Registry setting that you must delete for this. I am running the cube and home with all options active and working.
i uninstalled HTC cube and the favorites still do not show up. even uninstalled and reinstalled HTC home and same thing. everything shows up except for the favorites.
szfjcr said:
Are you using WM6 with the cube? The favorite people tab will not show up on Home if the cube is also used.
Click to expand...
Click to collapse
I've the same problem...
I'm not able to set any favorite people on the HHC tab....
Also if I hit "+" nothing happens....
So the problem is releated to the Cube??
And if I kill the Cube... Do you think that I'll solve the problem??
flaviopac said:
I've the same problem...
I'm not able to set any favorite people on the HHC tab....
Also if I hit "+" nothing happens....
So the problem is releated to the Cube??
And if I kill the Cube... Do you think that I'll solve the problem??
Click to expand...
Click to collapse
Yeah, the cube removes the favorite tab from htc home. It's not a problem though. Simple solution - DELETE THE FOLLOWING REGISTRY KEY;
HKEY_LOCAL_MACHINE/Software/OEM/MASD/QuickDial
illusion8088 said:
Yeah, the cube removes the favorite tab from htc home. It's not a problem though. Simple solution - DELETE THE FOLLOWING REGISTRY KEY;
HKEY_LOCAL_MACHINE/Software/OEM/MASD/QuickDial
Click to expand...
Click to collapse
Damn.....
That registry key doesn't exist.....
I think that I deleted it sometimes ago.....
Could you copy yours and send it to me?
I wanna try if with that registry key, the favorite people tab would work...
Thank you...
EDIT:
I HAVE JUST FOUND IT!
It is in HLM/Software/OEM. Not in /MASD
There I've found a key called Quickdial...
It's the same you were talking about or not??
RE-EDIT:
Ok, now I've understood that in the past I moved that key to another folder...
In fact now, after I've moved that key to /MASD, I'm not able to see the favorite people tab.....
But my problem is an other....
When I can see the favorite people tab, I can't it any "+"....
So I can't chose any favorite person....
I CAN SEE THE FAVORITE PEOPLE TAB, BUT I CAN'T HIT ANY OF THE "+" BUTTONS...
If I try to it one of them... Nothing happens...
I don't know if this is important, but I have installed PocketCM, and this program runs instead of the standard contacts one...
How can I solve that??
Noone?.....
flaviopac said:
Noone?.....
Click to expand...
Click to collapse
Hi I gaot exactly the same problem as flaviopac.
@flavio: Did you solve the problem?
Thanx
Thanks for the clue mate..THUMBS UP!!!
By the way, I've got the same problem with the contacts that can't be modified..ANY CLUE???????????!!!!!!!!!!!!!
Fav people tab is showing, i can add people from contacts, but cannot dial directly from there. Secondly if i reboot all the added contacts to fav people tab are goneconfused::mad
rajiminhas said:
Fav people tab is showing, i can add people from contacts, but cannot dial directly from there. Secondly if i reboot all the added contacts to fav people tab are goneconfused::mad
Click to expand...
Click to collapse
Try to add the Favorites in the Cube (they automticly appears in Home Tab) not in HTC Home, that solved the problem on my Device
After i finish call i see about 3 sec delay, and i can't repeat call or any action.
How to remove it delay ??
(please if possible registry tweak)
You can change that setting in Advanced Configuration Tool. In the "Phone" settings, end call delay default is at 3000, hence the 3-second delay. You can lower than number in the settings. Works great.
doesn't work, but i enter 0 sec
Ethermind said:
doesn't work, but i enter 0 sec
Click to expand...
Click to collapse
Did you try 1 second? That's what I have it set to, and seems to be working well.
hmm... doesn't affect...
Ethermind said:
hmm... doesn't affect...
Click to expand...
Click to collapse
One thing to keep in mind is that when changing the setting, you can't just type in the number. If you do that the setting won't stick. Instead, you have to use the up/down arrows to set the value.
Did you reset the device? It works for me.
Works for me too ...set it to zero (by typing in 0) and soft reset ...no more delay ending calls (answers quicker too)
Am using R3AA
works really great! is there also maybe an option where you can get rid of that beep beep beep after a ended call?
Does anyone know the registry key for it?
Mine doesn't have the option in the advanced tab. Just 'Reject call with text messge' & 'Add new phone number to contacts at end of call'
its not in the advanced tab. you have to use Advanced configuration tool...
Use the original winmo dialer not the beautiful one
Im using the dialer from PocketShield which has a pretty nice look in my opinion.
darfri said:
Use the original winmo dialer not the beautiful one
Click to expand...
Click to collapse
LOL you made it sound very unappealing.
Haxxler said:
Im using the dialer from PocketShield which has a pretty nice look in my opinion.
Click to expand...
Click to collapse
The latest pocketshield even suggests to disable the beautiful dialer. Have you done that?
Hi,
I just installed Shaps Advanced Config Tool, but the mentioned option under Phone is not there. Is there another Advanced Config Tool I don't know about?
Thanks
Marc
Figured it out myself =) Used an old version (2.2) instead of the new 3.3.
nevermind =)
wheezzl said:
Hi,
I just installed Shaps Advanced Config Tool, but the mentioned option under Phone is not there. Is there another Advanced Config Tool I don't know about?
Thanks
Marc
Click to expand...
Click to collapse
I downloaded it too and the option was there. 4th option under phone. "End Call Delay"
wheezzl said:
Figured it out myself =) Used an old version (2.2) instead of the new 3.3.
nevermind =)
Click to expand...
Click to collapse
Very good!
Steve_TLS said:
I downloaded it too and the option was there. 4th option under phone. "End Call Delay"
Click to expand...
Click to collapse
4th one down under phone, i have call id match: 8 ??
Is there a way to get more Buttons in the Program tab?
I've tryed to add more button folders in registry:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher]
But the result is,
there are more buttons, but You can't use them
so is there something else I have to change?
Edit:
Added a Screenshot,
-> thats What I got.
but I can't add programs to the last 3 lines.
Use Manilla 2D Customizer (M2DC)
http://forum.xda-developers.com/showthread.php?t=427392
You can have a maximum of 5x9 = 45 buttons
But I have an HTC HD with Manlia 3D
thix sux =(
LewxX said:
thix sux =(
Click to expand...
Click to collapse
If you export and post the Regkey you mentioned above i'll try to have a look at it.
I've done at pocketpc.ch:
here is the link:
http://www.pocketpc.ch/touch-hd-twe...tabs-unter-programme-im-neuen-startmenue.html
I guess you'll understand that language ^^
LewxX said:
I've done at pocketpc.ch:
here is the link:
http://www.pocketpc.ch/touch-hd-twe...tabs-unter-programme-im-neuen-startmenue.html
I guess you'll understand that language ^^
Click to expand...
Click to collapse
Not just a little bit I will take a look there
Wondering
I added the registry entries to allow for more, this all seemed to work, clicked on a button to add the appropriate new link, comes back, no icon. I go into Diamond TF3D Config and can see that the entries are in there, but TFlow3D wont action or show the icons - very confusing, there must be something we are missing and my Swiss German is sadly lacking - any ideas?
mlk said:
I added the registry entries to allow for more, this all seemed to work, clicked on a button to add the appropriate new link, comes back, no icon. I go into Diamond TF3D Config and can see that the entries are in there, but TFlow3D wont action or show the icons - very confusing, there must be something we are missing and my Swiss German is sadly lacking - any ideas?
Click to expand...
Click to collapse
I guess as soon as there is a solution for that LewxX will post it
Sorry, fwt, I thought you and LewxX had solved this with the link to our Swiss friends... looking forward to any solution!
Here is my hybrid. It works but the menu on the hometab does not. If you are like me and can't get 2018 working, this will fix it.
Why am I sharing? Cuz I'm a nice guy
Link: http://www.fileserve.com/file/UhvCHJA
What do you mean the menu on the Home tab? That's a major problem my friend.
If you are talking about the main home menu button how are people going to get to Co0lies Home Tab settings Etc.
I would not call this a working set of packages.
bobsbbq said:
What do you mean the menu on the Home tab? That's a major problem my friend.
If you are talking about the main home menu button how are people going to get to Co0lies Home Tab settings Etc.
I would not call this a working set of packages.
Click to expand...
Click to collapse
This package is better than NO PACKAGE at all. Nothing else would run on my ROM except this combo. 2018 Core with 2017/2016 tabs works on my Rhodium Euro based ROM. If you want to share your WORKING package, please do. I can update the first post.
I was talking to another chef, and it seems the menu button not working is related to other EXT (apparently).
DJGonzo said:
This package is better than NO PACKAGE at all. Nothing else would run on my ROM except this combo. 2018 Core with 2017/2016 tabs works on my Rhodium Euro based ROM. If you want to share your WORKING package, please do. I can update the first post.
I was talking to another chef, and it seems the menu button not working is related to other EXT (apparently).
Click to expand...
Click to collapse
Menu in Home tab not working is due to the number of quicklink slots declared incorrectly. HTC programmers are a bunch of weirdo where their coding is a total mess.
For 2018, the Core package has a registry entry setting the quicklink slots to 16. However some part of the Home package have the number hardcoded. So if you change the number in registry, the menu would not work.
Btw, if you install CHT, you'll have no Menu problem because Co0kie takes care of this.
programatix said:
Menu in Home tab not working is due to the number of quicklink slots declared incorrectly. HTC programmers are a bunch of weirdo where their coding is a total mess.
For 2018, the Core package has a registry entry setting the quicklink slots to 16. However some part of the Home package have the number hardcoded. So if you change the number in registry, the menu would not work.
Btw, if you install CHT, you'll have no Menu problem because Co0kie takes care of this.
Click to expand...
Click to collapse
I am aware that CHT fixes the menu issue. Does anyone have any other solution though? Editing the registry will accomlish this? Thanks!
DJGonzo said:
I am aware that CHT fixes the menu issue. Does anyone have any other solution though? Editing the registry will accomlish this? Thanks!
Click to expand...
Click to collapse
If you use OBEO's version, you must set,
[HKLM\Software\HTC\Manila]
HomeShortcutNum = 0x0c
For other version,
[HKLM\Software\HTC\Manila]
HomeShortcutNum = 0x09
programatix said:
If you use OBEO's version, you must set,
[HKLM\Software\HTC\Manila]
HomeShortcutNum = 0x0c
For other version,
[HKLM\Software\HTC\Manila]
HomeShortcutNum = 0x09
Click to expand...
Click to collapse
That did not fix my home screen
My quicklinks are uneditable and my Menu softkey still does not work.
Any other ideas? Thanks
DJGonzo said:
That did not fix my home screen
My quicklinks are uneditable and my Menu softkey still does not work.
Any other ideas? Thanks
Click to expand...
Click to collapse
Btw, if you are mixing the Home package files from multiple builds, that would cause the problem you are having now too. As I said earlier, HTC hard coded some part of the code (across multiple files) for the slots number, thus causing the said problem.
programatix said:
Btw, if you are mixing the Home package files from multiple builds, that would cause the problem you are having now too. As I said earlier, HTC hard coded some part of the code (across multiple files) for the slots number, thus causing the said problem.
Click to expand...
Click to collapse
So there is no solution other than using 2018 home tab or CHT?
CHT is too slow to be an option and 2018 breaks landscape.
This sucks.
DJGonzo said:
So there is no solution other than using 2018 home tab or CHT?
CHT is too slow to be an option and 2018 breaks landscape.
This sucks.
Click to expand...
Click to collapse
Umm... edit the lua script?
programatix said:
Umm... edit the lua script?
Click to expand...
Click to collapse
That is what I'm gonna try next.
I just saw your post @ Mobile Underground. I don't roam Mobile Underground a lot but I'm gonna start doing it more often.
Thanks for the help.
Ive used SSPL a few times to change the ROM of my Mini and now when I get a text message my screen doesnt light up while in standby. Is there any fix for this apart from hard reset or reusing SSPL to see if an error occurred?!
It used to light up before with previous installs.
Thanks for any reply.
Use Advanced Configuration Tools.
doesnt seem to work on my mini, installed it onto the storage card - cant see option to change notifications.....
thanks anyway
You must install it in internal memory.
The app contains tweaks.
I used the exe from the developers site - got the cab now.... shall see how it goes; thanks!
my mistake
Okay I couldnt find any option within Advanced Configuration for the screen lighting up when a text is received but there was a lot of options - so if someone can clarify its there I stand corrected!
I also installed BsB Tweaks and there is a SMS wake up option , I activated this and it does what I want!
Thanks again to fighter7139 for pushing me in the right direction - appreciated bro.
By the way, in ACT the option is:
Messaging--->Wake up on new sms.
fighter7139 said:
By the way, in ACT the option is:
Messaging--->Wake up on new sms.
Click to expand...
Click to collapse
Yeah I saw that on a site but it appears not listed on the v3.3 I installed!
ALSO just noticed that all I needed to do was...
Window Icon - Settings - Menu - Sounds & Notifications - Notifications - Message : New Message AND
tick Flash Light
-
Man, I feel dumb for not noticing that!
Fourth option in "Messaging":
http://www.freewareppc.com/utilities/advancedconfigurationtools.shtml
fighter7139 said:
Fourth option in "Messaging":
http://www.freewareppc.com/utilities/advancedconfigurationtools.shtml
Click to expand...
Click to collapse
Yep, Ill try that link - see if its listed ; the download I used honestly doesnt list it weirdly.
brutaled said:
ALSO just noticed that all I needed to do was...
Window Icon - Settings - Menu - Sounds & Notifications - Notifications - Message : New Message AND
tick Flash Light
-
Man, I feel dumb for not noticing that!
Click to expand...
Click to collapse
That's led notification, not waking up screen.
fighter7139 said:
That's led notification, not waking up screen.
Click to expand...
Click to collapse
Ah, okay BsB Tweaks it is then!
Ive attached a screenshot of what I mean about Advanced Config Tool not showing the Wake Up option for SMS sadly....
I installed your link for 3.3 - same issue.
Some options don't appear in your photo.
fighter7139 said:
Some options don't appear in your photo.
Click to expand...
Click to collapse
I removed ACTools now but I assure you the SMS wake up option was not listed; Im unsure why!
I really don't know what to believe!!!
http://forum.xda-developers.com/showthread.php?t=548715
fighter7139 said:
I really don't know what to believe!!!
http://forum.xda-developers.com/showthread.php?t=548715
Click to expand...
Click to collapse
I have no reason to lie bro.
Thanks for your help, Im content to use BsB Tweak for the fix.