Related
Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!
Bricked Cruise
hansdekker said:
Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!
Click to expand...
Click to collapse
First you can try a hard reset!
Here you can download the original shipped rom with installer.
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
kr.,
Frepke
Update
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.
Three colour screen info
Pola100
Spl-1.25.0000
Cpld-2
hansdekker said:
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.
Click to expand...
Click to collapse
Hi
Ths info I posted relates to the Kaiser (kaiser [nearly] equals Polaris in terms of hardware) and the MTTY is from the ELF forum.
"set 16 0" to tell bootloader to boot the OS after reset.
"task 8" to get your device formatted
I suggest the set 16 0 and a reset to see if that helps, I do advocate you searching for these commands and checking they are applicable.
The info was from this KAISER thread
http://forum.xda-developers.com/showthread.php?p=2103884
HTH
Leon
MTTY
Thanks for your advice guys.
I tried the "set 16 0" command + reset. Still same situation.
Any other tips anyone?
Darn
No more reponses?
It is probably bricked then.
So what's my next move...trash it?
hansdekker said:
No more reponses?
It is probably bricked then.
So what's my next move...trash it?
Click to expand...
Click to collapse
try flashing using sd card
Tupac_Shakur said:
try flashing using sd card
Click to expand...
Click to collapse
I think he wrote already that he tried to flash some ROMS using SD card... (POLAIMG.NBH). Not sure though if he tried re Hard-SPL'ing using the SD flash method...
So I would suggest to retry the HardSPL using the POLAIMG.NBH method (just as if the HardSPL's .NBH file was a normal ROM) if this hasn't been tried yet...
Hey you must careffuly read mtty in kaiser thread.....mtty can brick your device for entire life.....my advice to you is pm GSLEON3
he's the master of using mtty and lot of kaiser user saved by him...
Hope this can help you
cheers
The Facts
When I try to hard-spl through the SD-card, it just says "Loading..." and that's where it stays - Even if I leave it till the battery dies. I tried the 2.10 and 1.10 versions on this page.
Are you sure? This Hard SPL suit for Hermes. You have to use this: http://forum.xda-developers.com/showthread.php?t=375338
TB
Hard-SPL through SD
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
How to flash your Polaris using the microSD card [Guide]
hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
Hi,
Try this thread :
http://forum.xda-developers.com/showthread.php?t=384084
How to flash your Polaris using the microSD card [Guide]
TB
It's starting to seem really hopeless
Thanks.
Same result. The screen just says "Loading..." and stays there.
hansdekker said:
Thanks.
Same result. The screen just says "Loading..." and stays there.
Click to expand...
Click to collapse
unplug usb and replug it
hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
1. You can not flash hard-spl with microSD method! (hard-spl flash use jumpspl to ignore cid-lock. But with microSD card method you will not use jumpspl, so you can not flash hard-spl! (and to use microSD method you have to have hard-spl on your pda)
2. If you unzip hard-spl on your pc will be an RUU_signed.nbh. This is the rom file, but you can not to flash it with microSD.
3. Your device is bricked, I think. Take it to repair!
after an unsuccessful flash, u shud never try to flash again, high chance of permanently bricking your pda. go contact GSLEON3, he saved my kaiser from bricking when i made the same mistake as u. helpful fellow. make sure u donate lol
Accepted Defeat
Hi
I accepted defeat and exchanged the unit.
Thanks for all the help.
H
Dear all,
First of all, many congratulations for the great forum and thanks for all the support given here.
Now, I recognise that problems similar to mine have been discussed elsewhere, so I apologise for opening a new post, however with all the material that I could find, I got a little bit lost, so here is the story.
Some 5 days ago, the screen on my HTC Elf stopped responding to any sort of touch. The green, red and action buttons were working but no touch screen.
I have read several posts, and concluded that one possible problem was a corrupted ROM, so I downloaded latest Onyx ROM and installed it. Phone was upgraded successfully and screen started to work again.
However, the first time I switched it off and then turned it on again, it did not boot up. It gets to the point where it displays Smart Mobility and then switches itself off. The orange light then comes on for about 6-7 seconds, then off for 1-2 seconds, and then on again......
Now it does not seem to be able to charge, but if I switch it on with the camera button on I am able to get to the ROM screen (the 'rainbow screen'), so I have hope that it is not dead.
What can I do to attempt to revive the phone please? Is there a sort of 'format' that can be given so that one can start flashing ROM, etc. from scratch?
Many thanks.
PS: Except for the above, I consider myself as a total beginner in this area.
Hearing that the touchscreen started working again after flashing the ROM, I would conclude it's a software-issue.
In the rainbow-screen, what SPL does your phone run? If it ends with 'cmon', you've installed HardSPL. That means you can flash your phone from the rainbow-screen. Given that your phone won't boot, you should try to flash a new ROM from the rainbow-screen. But first, you have to confirm that you've installed HardSPL.
Good luck!
@mrqips - many thanks for your reply.
The screen says that:
IPL 2.20.0002
SPL 1.11.0000
xumiking said:
@mrqips - many thanks for your reply.
The screen says that:
IPL 2.20.0002
SPL 1.11.0000
Click to expand...
Click to collapse
Sorry Buddy.. It seems that you didn't use HardSPL, unfortunately you won't be able to flash any other ROMs..
Yet.. You might be able to use the Gold Card Method.. Give it a try and see what would happen..
Another point is.. I'm very interested to know how did you flash Onyx ROM.. without using HardSPL nor USPL (as obvious from your IPL), I would say that you used the "White Screen Method" which is by the way.. the least safest way..
Hope That Helped...
Thanks for your feedback.
Actually, I happened to be reading the post by @sbettencourt in this thread:
http://forum.xda-developers.com/showthread.php?t=595856&highlight=smart+mobility
Here, a step-by-step approach is given to recover the phone:
"1º [PRJ] Unbricker ROM discovered (wildcard CID and Model ID)
2º Pick any shipped ROM from this thread:
If you have one P3450 -> here
If you have one P3452 -> here
After this, with luck and good work you recover the phone...
3º Then you must do CID_Unlock... You can search how to do it on Wiki or if you want i got one steps how to do it right here and you can see one video with cid_unlock on my signature..." (pasted from the thread)
I did Step 1, and updated it with the unbricker ROM using romupdateutility, and the phone was recovered! It could load, get to Windows Mobile, etc.
Then, unfortunately, when I did Step 2 (mine is a P3450) so I downloaded a ROM from the page indicated, I tried to update the shipped ROM using romupdateutility, but as soon as it got to 2% it failed saying that the vender ID is invalid.
Now, I don't seem to be able to update it with anything - not even the unbrick ROM. What a shame I almost go there.....
xumiking said:
I tried to update the shipped ROM using romupdateutility, but as soon as it got to 2% it failed saying that the vender ID is invalid.
Click to expand...
Click to collapse
You put the shipped ROM in the same folder with RUU??? Why??? You don't need to do that...
You only need to double click on shipped ROM and the installation process begins...
@sbettencourt,
actually yes what I did was to click on the update directly.
I downloaded the file RUU_Elfin_DOPODASIA_WWE_2.20.707.1R_4.1.13.51_03.07.90_RED_Ship_Reduced.exe and executed that directly.
However, now, even this one is stopping at 2%.
Is there any hope, or have I destroyed the phone?
Thanks.
If you can't flash the Shipped ROM, you have now to try the Gold Card... Follow the steps in that Gold Card thread...
Hello everyone,
I finally managed to revive the device, by flashing it with a 'correct' shipped ROM, which did not give any errors on updating. Big thanks for all your support - you are the best!
As this starts to get addictive, and because I am now running a ROM version which dates to 12/11/2007 (2.27.468.1B WWE), what are the suggestions for upgrading the ROM please? My device is an ELF0100.
Thanks again.
Coool Now try to keep him alive
Very true
I managed to flash it with Onyx Ultimate 4.8 (10/07/2009) and it seems to be performing splendidly.
Thanks for all your help.
Good Job
[SOLVED] Help, installed wrong ROM (european), now stuck with "Stick Together" screen
I bought a T mobile USA HTC HD2 phone in the U.S. and tried to install Artemis ROM which is for european phones only.
So now I'm stuck with the pink welcome logo ("stick together").
If I press the volume button and soft reset, I can see the screen with my HSPL.
I tried to do hard reset, but it didn't work.
Please help me how to roll back to original rom, or to install any eligible for T mobile usa rom.
Thank you!
Sweet, so that means you are able to get into bootloader?
Just flash task29 then flash a tmous rom
Thanks for the reply.
Could you please exlpain what task29 is and how to do this? Or where I can find the info.
I am a complete noob in this stuff (obviously).
Thank you
Remove SD Card, and Sim Card....
First get into bootloader by holding down the volume down button and power on the device.
next down load this file and run it as administrator: Follow the prompts and instructions.
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
When it hits 100% get ready to hold down the volume button again.... the HD2 will reboot and holding down the volume button will get you back into the bootloader.
Now get a US compatible rom and flash it the same way you just did the Task29. This time when its done flashing remove the battery and re insert your SD card and Sim.... let the phone boot up and you will be good to go.
Hope that Makes sense lol.
illconn, thank you for detailed answer!
I'll try it when I'm home. The only thing though is where can I find the US compatible ROM?
update
I got, I thought I'd need official T Mobile's ROM from their web site, but I'll be able to use any of the ROMs available in XDA. Right?
to be safe i would use the any of the ones in here:
http://forum.xda-developers.com/showthread.php?t=653114
Once you read up a little more on here, and understand how some of the things work you can see there are a few more roms that you can use.
But before you can do any of that you need to make sure your phone has the right HSPL... there is a SSPL but just do the HSPL its easy.... now if you have already done this then great. If not start by reading here:
http://forum.xda-developers.com/showthread.php?t=653614
GL and welcome to the world of custimization!!
Yeah, I decided to try to understand the process of changin the ROM.
Now I understand that SPL boots the device. And HSPL allows to boot custom ROMs.
So what is task29 for?
Task29 pretty much formats the internal memory.... although putting a new rom on the device erases, it sometimes leave bits and pieces of the old roms.... so its recomended you Task29 before a new rom so that you dont have any complications later. For example some people will have a lot of freezing, or programs crash, once they task29 and reflash problem solved.
HTH
Thank you!
And last thing, just want to make sure everything is ok, not to repeat the same mistake. When I go to the bootloader, I get Red-Green -Blue-White screen with this data:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Serial
That's okay to do the custom ROM, right?
a5med said:
Thank you!
And last thing, just want to make sure everything is ok, not to repeat the same mistake. When I go to the bootloader, I get Red-Green -Blue-White screen with this data:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Serial
That's okay to do the custom ROM, right?
Click to expand...
Click to collapse
Yes that is correct; by it showing "CotullaHSPL" that means you HSPL'd your phone and can download any compatable ROM onto your device, but just as posted above use task29. I was afraid to use it myself but after flashing my phone now about 30 times I've gotten over it.
Here is the link to the stock ROM's :
http://forum.xda-developers.com/showthread.php?t=655653
if you use the 2.10.0 it will be back to stock. (but you can still burn ROM's onto your phone) because it won't erase you HSPL, if you run it from your computer.
Make sense?
Guys! Thank you so much! I installed Kumar's ROM. It works like a charm!
I gained so much experience, and fixed the device. I'm so happy! Thank you again. Thank you
installed the wrong ROM for ATOM
i was looking for a WM 6.5 rom for atom and little did i realized that ive downloaded the ROM for exec. it did installed fine in my ATOM but it always bugs me when it is booting up. it only shows the boot screen with ATOM exec LOGO and suddenly shuts down. i was trying to install back the old rom but it says "The ROM that i am trying to install is not designed to work for this device...". is there any way i could remove the atom exec rom in my device and install my old ROM? i badly need help and this is the last place i could get them. thanks very much! any help will greatly be appreciated. More Power XDA-Dev Gurus.
My Device is: O2 ATOM
wrong ROM: O2 ATOM EXEC
wrong rom
is there anything utility that erases the wrong rom installed for XDA ATom. i installed the wrong rom for ATOM and i cant use the phone because it always reboots when i turn it on.
thanks in advance..
illconn said:
Task29 pretty much formats the internal memory.... although putting a new rom on the device erases, it sometimes leave bits and pieces of the old roms.... so its recomended you Task29 before a new rom so that you dont have any complications later. For example some people will have a lot of freezing, or programs crash, once they task29 and reflash problem solved.
HTH
Click to expand...
Click to collapse
is there anything utility that erases the wrong rom installed for XDA ATom like the Task29?. i installed the wrong rom for ATOM and i cant use the phone because it always reboots when i turn it on.
thanks in advance..
Wow. Number one, triple posting THE SAME QUESTION. Uhm, no. Number two, this is the HD2 or LEO section, NOT THE ATOM ONE. You won' t get any help here, you need to go post in the atom section.
Gotta say....I did the same thing as |OP|....this thread is making me very comfortable to fix my problem. Kudos to you guys for being patient with |OP|...it helped another newbiew
I talked to the number on #1 post and all I got is that I must ship the old one first. I told him about my location that shipment would be problem (from me to them, I can arrange shipment to US address and resend to me). Damn, now I must get it on my own for $50 or how much they cost (no ebay, they are mostly scams). Plus I got no Transformers, the card broke down and I had to format it (didn't help for fixing the freezing issue).
I talked to them over Skype though, because.. well I live in Europe. I'm not sure he understood me well, I have a sore throat and I'm having obstacles talking .
Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!
prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.
Can you explain me? Please step by step... Thanks in advance
prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!
If you can't pay rent, I'm afraid I'll have to ask you vacate the area.
Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..
spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device
original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash
i have shipped original rom, still no luck
not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you
Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,
Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?
Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !
Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.
Hi guys,
I wanted to return to the original W.M 6.5 in order to install new Android NAND, so I formatted my SD card, placed the image and loaded the bootloader. Unfortunately, the installation was interrupted. After that when trying to repeat the procedure bootloader says "Upgrade ROM code error Please try again" . I am trying again, but the same thing happens over and over again. I tried installing it via USB connection, but it installs 1% and gives the same error "000028002 NOT ALLOW".
Does that mean that I have bricked my phone and if not, how am I to fix that and install what I wanted to install?
Message says it all. ROM code error.
Fliashing from SD will remove HSPL so you have no CID bypass.
ROM you are flashing is not matching your devices country ID so you need to find a ROM that is correct to flash via SD or flash via USB & flash a suitable HSPL first.
Before proceeding flashing, check ROM & radios are correct for your device as too many people are bricking their devices by silly mistakes these days.
Thank you!
My phone is an Orange bought form UK. I fount the required ROM (ver. 3.14), but the same thing happens again. I tried to find the original 1.72, but it cannot be foung anywhere. Any ideas?
Flash HSPL via USB then ROM via USB
I managed to install the stock ROM, now I am going to pick a nice NAND Adnroid.
Thanks for the help, much appreciated!