Flash failed [Samsung Galaxy S] - Galaxy S I9000 General

Hi,
Yesterday i tried to flash my Samsung Galaxy S, and during the flash with Odin i see problem. Flash failed.
Now when i try to boot my phone i can see a picture with a phone and computer join with exclamation panel.
Can I repair the phone? What should I do?

Hold the Volume -, Power and Home Button until you see the "Downloading..." screen with a yellow Android.
Connect the phone to your PC and try to flash the ROM again.
What OS do you use? Which ROM do you want to flash?

Same issue, I try to flash DXJF4 to DXJG4, please help me how to fix it....
Thanks a lot for your helpp

Thread moved in Galaxy S I9000 General.

Related

help samsung gt-i5800 dead

hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
manuel80 said:
hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
Click to expand...
Click to collapse
Try flashing. Look at the link in my sig.
Its nothing big
The same happened to me. I then searched the net and found this wonderful site. I flashed the original rom, then got bolder and started flashing froyo roms and am now happily flashing custom roms ! I can say I enjoy my phone more now!!. Flash your phone too!!
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
manuel80 said:
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
Click to expand...
Click to collapse
You can try to factory reset it... Follow the following
Press Vol Up + Vol Down Key (Press in middle so that both are pressed)
Press Home Key
Now Press Power
GT I5801 logo will appear
Leave the keys and your phone will boot into recovery
Try wiping cache first and if not working factory reset it
If after this it doesnt work, Install Kies...It will install drivers
Follow the above steps except press vol down key instead of both
Phone will go into download mode.... Plug in USB and flash it
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Just flash your phone with new rom. For this use Odin and OPS file and rom .
Boot into download mode of gt-5800 by using vol - , power and home button all at a time. Then you can flash new firmware from Odin , use one package or other option specific to rom and your phone will start working again. Hope this helps.
Post any problem while flashing.
manuel80 said:
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Click to expand...
Click to collapse
Did the phone hung during upgrade process or Kies hung during download process?
If phone hung during upgrade process and now you cannot boot that means your phone is hard bricked. This is because when you upgrade the phone through kies, it updates the boot loader and when phone hung during the process means bootloader is corrupted. In this scenario, you need to take the phone to service center and get hardware replaced
then I guess I'll have to bring your cell phone service ... damn ..
Grazzi guys for the help anyway .. I just know you know the developments of the case ..
hello
have you ever tried anything like flashing before? if not take it to samsung service centre and say it is not switching on.

[Q] flashing Samsung Galaxy S (i9000)

Hi guys:
I'm really new with the galaxy, and was trying to upgrade and flashing my galaxy, but this not working and now is not working any more . If I push the power on button, nothing happen, if I try to turn the galaxy in recovery mode (vol+, home and power on) not works, the only can I do is power on in mode "downloading...", I was reading in several internet pages several instruction in order to connect the pc to the galaxy trough Odin (v 1.3), this looks start working but then stop on SBL.bin and nothing happen later.....
Could somebody tell me a process in order to recovery my galaxy please??????
Thanks a lot!
I believe you're looking for this forum:
http://forum.xda-developers.com/forumdisplay.php?f=656
Search and read before posting!!

After Flashing Stock 4.3 Black Screen!

Hi everybody.
Today i wanted to go for 4.3. I've tried flash it from ODIN 3.09. It says flashed successfully but when i reboot, it doesnt boot. Shows "Samsung Galaxy S4" and then no boot animation or anything. Just blank black screen. I need your help because i have to meet my friends. :crying:
If someone find the solution i will give him a little surprise Please answer...
More info...
deadirony said:
Hi everybody.
Today i wanted to go for 4.3. I've tried flash it from ODIN 3.09. It says flashed successfully but when i reboot, it doesnt boot. Shows "Samsung Galaxy S4" and then no boot animation or anything. Just blank black screen. I need your help because i have to meet my friends. :crying:
Click to expand...
Click to collapse
We need more info:
Which file dit you flash?
Dit you flash one file in PHONE?
or mulitple files, like PIT+BOOTLADER+PDA?
Also it is a good idea to check the MD5 before you flash to make shure the download is not corrupt.
Can you stil go into download mode? Volume Down + Power + Home
Can you go into recovery? Volume UP + Power + Home
Also you can retry with Odin3 v1.85.
re: booting issues
deadirony said:
Hi everybody.
Today i wanted to go for 4.3. I've tried flash it from ODIN 3.09. It says flashed successfully but when i reboot, it doesnt boot. Shows "Samsung Galaxy S4" and then no boot animation or anything. Just blank black screen. I need your help because i have to meet my friends. :crying:
Click to expand...
Click to collapse
Here is my suggestion, reboot the phone into recovery mode. (it's ok if its a stock recovery)
After going into recovery do a "factory reset" and see if the phone starts up normally.
There is at least a 50/50 chance that it will.
If it still does not boot then you need to go to SamMobile: http://www.sammobile.com
and get the stock official ODIN flash firmware for your specific phone model.
I would have given you the exact download link for your specific phone if you would
have been more SPECIFIC and added the EXACT model of your phone in your post.
(i9500-i9505-i9505G and so on)

[Q] NOTE 3 , flash with mobile odin = Blue Logo

dear All
I did something wrong today.......!!
I flashed a new kernel ( beeing using the last echoe rom..) and immediatly ( even before the flashing process ..this is my impression..) the screen appeared Black with a very sad blue android logo
no way to restart in recovery nor in download mode....
this is the first time a face such a problem
thanks in advance to all of you that could provide me any suggestion to try to come out from this issue.....
NOTE Bricked !!!
tower5 said:
dear All
I did something wrong today.......!!
I flashed a new kernel ( beeing using the last echoe rom..) and immediatly ( even before the flashing process ..this is my impression..) the screen appeared Black with a very sad blue android logo
no way to restart in recovery nor in download mode....
this is the first time a face such a problem
thanks in advance to all of you that could provide me any suggestion to try to come out from this issue.....
Click to expand...
Click to collapse
additional info :
when I try to put the device in recovery mode, nothing happen , only few seconds of the white " Samsung GALAXY Note 3 N9005 " and on the top-left part of the screen the bleue sentence: " RECOVERY BOOTING ....".....and after this ...only the Blue Android logo
the same happens if I try to reboot in download mode...
and if I connect the usb cable...no reaction....not visible by the PC....
Reading is the key
@tower5
I can only recommend to read before you flash anything. I don't really know your real issue cause you didn't post any information on your phone. I need to know your version (which rom/android 4.3/4.4/modem/bootloader etc). Next I need to know what you did/how you flashed exactly (you got a custom recovery?)
What I can say is that you did something wrong along the process so the issue is caused by you not the kernel. Please remember that before you start to report a bug

NEED HELP - I think I bricked my s7 edge

I tried installing a flash rom for the first time, followed instructions, i dont know what i did wrong, but i think i bricked my s7. Right now all i got is a blue screen with the message "An error has occured while updating the device software. Use the emergency recovery function in the Smart Switch PC software"
But i downloaded Smart switch but it doesnt recognize my phone, it says its not supported. I also tried putting in download mode again but its not working.
Please Help!!
UPDATE
After a lot of time holding vol down + Power + home i got into download mode again, but im trying to use odin again but its not doing anything, i think its not recognazing the usb connectoin or something
rkuyy said:
I tried installing a flash rom for the first time, followed instructions, i dont know what i did wrong, but i think i bricked my s7. Right now all i got is a blue screen with the message "An error has occured while updating the device software. Use the emergency recovery function in the Smart Switch PC software"
But i downloaded Smart switch but it doesnt recognize my phone, it says its not supported. I also tried putting in download mode again but its not working.
Please Help!!
UPDATE
After a lot of time holding vol down + Power + home i got into download mode again, but im trying to use odin again but its not doing anything, i think its not recognazing the usb connectoin or something
Click to expand...
Click to collapse
Here's a thread with the firmware and guides you'll need.
http://forum.xda-developers.com/showthread.php?t=3382679
"And on that bombshell!"
Sent from my Stunningly Beautiful Echoe Powered G935F

Categories

Resources