Related
Hi All,
I too have a strange WiFi issue. Here goes:
My phone is able to connect to free WiFi stations and the WiFi station at my parent's place. When I try to connect at home, it connects but I am unable to browse.
I previously used WEP encryption and have also tried removing all encryption...but no luck.
Here are my current router settings:
Band 2.4 GHz B+G
Mode AP
Channel 9
Authentication Open
Preamble type Long
Broadcast SSID Disable
Encryption None
Use 802.1x Authentication Disabled
Phone Details
HTC Touch
Browser Netfront/IE
My laptops, DS Lite, Wii can connect and work with the router...
Any help will be highly appreciated
Check that you don't have MAC ADDRESS FILTERING at the router. It may be hidden under Filter settings, like my D-Link is. This may sound trivial, but more than once I forgot about the MAC filtering.
If that doesn't help you, then just to narrow it down, at my home I use WEP and disable SSID broadcast also, and my Touch can connect fine, and fast.
Scratch the last post! I had the same problem with my TOUCH..Just put the power level to the max (i.e. go Start -> Settings -> Connections -> Wireless LAN -> Power Mode -> and slide all the way LEFT to Best Performance) and all hail ..your problem solved
I also use a Touch. I put the slider all the way to the right (Best Battery) and I connect fine. You people must have a big house, or a crap router?
HTC Touch wireless lan connection problems
hi,
Im having the same problem. No MAC filtering & no encryption on ADSL router.
HTC touch can connect to the router at 192.168.1.1. But it does not connect to any other web page.
Message shown is: "Page cannot be found. Check the name and try again."
Any other tips.
Thanks in advance.
dbmayur said:
Hi All,
I too have a strange WiFi issue. Here goes:
My phone is able to connect to free WiFi stations and the WiFi station at my parent's place. When I try to connect at home, it connects but I am unable to browse.
I previously used WEP encryption and have also tried removing all encryption...but no luck.
Here are my current router settings:
Band 2.4 GHz B+G
Mode AP
Channel 9
Authentication Open
Preamble type Long
Broadcast SSID Disable
Encryption None
Use 802.1x Authentication Disabled
Phone Details
HTC Touch
Browser Netfront/IE
My laptops, DS Lite, Wii can connect and work with the router...
Any help will be highly appreciated
Click to expand...
Click to collapse
hencre said:
hi,
Im having the same problem. No MAC filtering & no encryption on ADSL router.
HTC touch can connect to the router at 192.168.1.1. But it does not connect to any other web page.
Message shown is: "Page cannot be found. Check the name and try again."
Any other tips.
Thanks in advance.
Click to expand...
Click to collapse
Same problem I am having now. I can connect now wifi, but get same error.
??????
Wifi Problem!
Hi guys,
I've got a problem and I'm hoping you can help me out..
I've got a HTC TOUCH and when I got it the Wifi connection was working just fine.. I could connect to any WIFI network and Browse the internet.
After a month or two, my phone wouldn't connect to my home wifi network anymore. And neither would it connect to any other wifi networks (I tried!)..
I've been all over the internet trying to figure out what could have happened and if someone else was having these problems to.
I just can't find the answer and I feel like I already tried everything I could think of..
Hope some of you knows what to do..
I'd suggest looking at the Touch forum... I've got no experience of Touch devices, but it may be a Radio ROM issue...
kinda same issue I am facing ! donno
MY HTC TOUCH never connects to NETGEAR WIRELESS ACCESS POINT
but finds LINKSYS routers in a jiffy :O
are Wireless Access Point and.. Wireless routers different
they both emit diff. signals ?
I have the same issue with a TYTN II, can connect to the wireless, but can't open any web pages.
problem with htc & WPA-PSK passkey 25 characters
My htc tilt connects almost everywhere, but i have a problem with wpa-psk at work. The password is from 25 characters, I read some articles what WM cannot handle such length. Maybe it's possible to edit somehow the registry?
I have the same problem guys, what can we do to find a solution i tried everthing i could, and i even tested it out with my 2 wireless routers, and at public places it connects (at home it doesnt connect though).
shirreer said:
Scratch the last post! I had the same problem with my TOUCH..Just put the power level to the max (i.e. go Start -> Settings -> Connections -> Wireless LAN -> Power Mode -> and slide all the way LEFT to Best Performance) and all hail ..your problem solved
Click to expand...
Click to collapse
Thanks a lot!
I had exactly the topic problem with manilla rom on my kaiser, could not use wifi any more. But with just sliding the meter to 'Best Performance' as suggested, wifi it once again works like a charm.
HTC Touch wifi solve
I had the same problem with my htc in WEP it dosen't browse, I changed the router to a better wifi protection like WPA-PSK, connected and worked fine, for some reason it only work's fine for a couple of minutes, I readed this post to put the sidebar in best performance and now everything works fine. An advice don't use WEP it's not secure at all.
http://en.wikipedia.org/wiki/Wireless_security maybe you fine this interesting and helpful.
I'm running into a problem were I can connect to an AP at work and surf the net fine but when I disassociate I cant connect to it again for a whole day. The AP must be saving some info and therefore will wait for the DHCP lease time to finish before allowing the touch to re-connect. I tried my laptop and was able to connect 3-4 times and never have a problem so it is isolated to the touch and windows mobile 6.1. To find some more info out I was able to clone the mac of the touch and use it as the laptops wifi cards mac. It connected fine on 3 consecutive tries.
Maybe windows mobile is missing some commands when disassociating from an AP and as a result leaving info out in nowhere land confusing the router.
Thanks for any help!
ok, here's me joining the club... dunno what happened... working one day, getting crap the next.
exact same problem as everyone else...connects to the wireless network, then when you try to surf, page cannot be found...
Exact same problem here.
In the beginning everything fine. Connecting to my home WiFi and using the internet without problems (weather, stocks, opera, email, google maps, even skype voip).
Then, last month, all programs are unable to find anything on the internet, although the device reports it is connected to my (unchanged) home WiFi.
All these programs work fine when the device is connected to the internet through activesync (usb cable).
Also this whole time I have been using my home WiFi with a laptop from both Vista and Ubuntu, with no problems, so I guess it's not the router.
Also have read in other fora about these wifi working - wifi not working "cycles" other people have had, with various WM devices. And various tricks like shutting wifi off and immediately on again.
I even hard reseted the device. Problem still there.
WTF?
Connected once only
Connected once only for a few minutes to my home router dir 310 D-Link, worked fine and fast. After that I closed the connection. Next day I tried to connect but my HTC Touch 3G doesn't see the router. I see any other routers, but I do not see mine. I connected to some friends routers with WEP and WPA encription just to be sure the phone working. During this I didn't changed the router or the phone settings. It is very strange. The problem maybe comes from the router.
I'm having the same issues with my HD2. Looking all over the place and seems to be a common fault, but thus far with no cure, I tried the power save mode
From new it worked like a dream, but then one day it would connect to AP's but act as if not connected. I flashed my ROM with the VERY impressive Merlion Leo v 2.66 and it all started working again. Then yesterday, it stopped again. I don't want to reflash, so I'm working hard to find a cure, and will report as soon as I find one.
---EDIT---
I've found a cure (for mine at least), not sure if it will work for everyone, and haven't managed to test it at any other AP's except for my home Router, but all I did was set the network card properties (Broadcom 802.11 DHD Network Adapter) to 'Use server-assigned IP address' instead of 'Use specific IP address'. I'm not sure why this worked as there was no IP address conflicts because there were no other devices connected to my router when I had problems, but it works for me, hopefully permanently
Good luck.
Try this. Its work perfect for me!
http://forum.xda-developers.com/showpost.php?p=10035476&postcount=10
Hi, I have HTC Touch HD New. I have home wireless secured router DHCP with (WPA2 Mixed) with paraphrase While trying to connect I ran through wizard to connect to my wireless no luck. Then gave static IP , changed WPA2 to WPA/TKP, changed channel from 5 to 11 no response, stopped Firewall, anything what can be done with router did…..no connection. The HD sees the network, but refuse to connect. Although, I am able to connect to an unsecured networks. All other media that connected to my wireless network works fine. Also I have noticed that wile running wizard the: "Use IEE8021x network access control" is checked and gray so I am unable to uncheck it. Maybe here is the problem.. no clue. Appreciate any suggestion.
Hi,
I can confirm I have the same problem.
Not only with Touch HD but also with HTC Rapheal.
If I find a solution I will let you know.
I had this problem too. In the wizard you have to specify it as a 'worknetwork', not 'internet'. The 'internet' option is for public (secured) networks like on a café. Then again, maybe you did this already. I have a WEP encryption.
You might also want to check, if your HD connects at all by turning off encryption in your WLAN router.
If your HD connects fine, then check in Advanced Config under the "Network" section, if you have WPA authentication enabled. My ROM had this disabled. After I enabled this option and made a soft-reset, my HD could connect to my WPA2(AES) secured network.
If everything else fails, you might try this free supplicant: http://www.securew2.com/products/
Please, report back if and how you resolved the problem !
None of the sugestions here (post #3, #4 and #5) solved my problem.
It's still not possible to connect to a secured network.
Tried without MAC filtering and vissible network but no joy.
I use WPA-PSK with a network key.
Unsecured it connects fine.
spasovxda said:
If everything else fails, you might try this free supplicant: http://www.securew2.com/products/
Please, report back if and how you resolved the problem !
Click to expand...
Click to collapse
I had the same problem with my Linksys Wrt54g Router using WPA-PSK, no matter what I tried it just would not connect. Without encryption or WEP encryption it worked just fine. Did set Wifi to performance oriented on the HD since that seems to have helped others but still no success.....
Here's the rub: I had installed Schaps Advanced Config tool before and had enabled WPA authentication under network. In a last attempt I set WPA Auth. to disabled, did a soft reset.....activated Wifi, entered my (27 character) passphrase and...my HD connects to my router using WPA-PSK and MAC-filtering without a problem...so that might be worth checking as well...
i hav no problem conneting my blackstone to my linksys wrt610 router using wpa2-aes. maybe you hav ur mac adres filtering turned on
just my 2 cents
Ditto post #8..
I have just connected for the first time to my work network, WPA-PSK(AES) and it connected fine without any problems.
Switched on CM, waited for the phone to list the networks, selected the one I needed and then choose "work" for connection and entered our passphrase. Sync'd up without a hitch.
Just to put this out there - do not connect your phone to the pc when trying to go wifi. It is disabled when activsync is... active.
Hi,
Thanks for the help.
Yes MAC filter is enabled but I've added the adress of HD to the list so it should work.
Today I've changed the channel in my Zyxel router to channel 11 and ques what....
IT WORKS FINALLY !
Channel 11 I choose because that's what the Touch HD chooses in WLan settings.
Maybe this helps for other people as well.
Edit;
A small update to mention.
I have two devices here, Touch Pro and Touch HD.
They both connect fine now.
Also the Touch Pro seems to pick channel 11 as default channel !
I would love to see someone confirms this because it was a real bugger to me.
Edit 2;
With MAC filter enabled both devices won't connect.
Weird thing is, both devices have the same MAC adres !
playboy4u2nv said:
i hav no problem conneting my blackstone to my linksys wrt610 router using wpa2-aes. maybe you hav ur mac adres filtering turned on
just my 2 cents
Click to expand...
Click to collapse
Laurentius26 said:
...Weird thing is, both devices have the same MAC adres !
Click to expand...
Click to collapse
Are you sure you're seeing it correctly??? MAC addresses are unique, just as telephone numbers are unique to the phone system. Same concept. No two wifi devices are supposed to have the same mac address...
I was having the same issue: not being able to connect my HD to my wireless network. Very frustrating... Then I remembered I use a controlled Access List, on my wireless router, based on MAC addresses. Once I put my HD's MAC in the list, I was able to connect.
I made a mistake.
I connected both devices to the desktop with Active sync to find out MAC.
If I give the command 'IPCONFIG /ALL' both WM devices have the same physical adress,
but after I succesfull made a wifi connection (without MAC filter) with both devices,
I noticed that the MAC adresses are different on both devices in the router config window.
I've added both adresses to MAC filter and enable.
Now everything is up and running !
JesseW said:
Are you sure you're seeing it correctly??? MAC addresses are unique, just as telephone numbers are unique to the phone system. Same concept. No two wifi devices are supposed to have the same mac address...
I was having the same issue: not being able to connect my HD to my wireless network. Very frustrating... Then I remembered I use a controlled Access List, on my wireless router, based on MAC addresses. Once I put my HD's MAC in the list, I was able to connect.
Click to expand...
Click to collapse
Laurentius26 said:
Channel 11 I choose because that's what the Touch HD chooses in WLan settings.
Click to expand...
Click to collapse
Can this be changed on the Touch HD? I don't seem to be able to change it. And channel 11 is a bit oversubscribed where I am...
razorblader said:
I had the same problem with my Linksys Wrt54g Router using WPA-PSK, no matter what I tried it just would not connect. Without encryption or WEP encryption it worked just fine. Did set Wifi to performance oriented on the HD since that seems to have helped others but still no success.....
Here's the rub: I had installed Schaps Advanced Config tool before and had enabled WPA authentication under network. In a last attempt I set WPA Auth. to disabled, did a soft reset.....activated Wifi, entered my (27 character) passphrase and...my HD connects to my router using WPA-PSK and MAC-filtering without a problem...so that might be worth checking as well...
Click to expand...
Click to collapse
i had the same problem. my hd use to connect fine with my wireless ruter untill yesterday. everything i tryed failed until i red this solution. i've done what razorblader suggested and guess what. it works flawless.
thank you!
it seems that the problem occurs after instaling advanced config 3.3, wich i did yesterday. for some reason it seems it mess the wifi settings.
thanks again!
i still have another problem, wich i have it since i bought the hd
i connect my laptop to my wifi router and it works great. i connect my hd to my wifi router and it works (again) great
but if i connect my hd to my laptop via usb and activesync, my laptop lose wifi connection. i reconnect it, keeps connection for few seconds and it loose it again.
any advice?
thank you!
Confirmed...
Had the same problem, Advanced Config WPA disabled works like a charm, if you enable it it actually disables it...
I connect to a Linksys broadband router with Mac filtering and WEP with no problems. Too lazy to try WPA2 because I'll have to reconfigure 3 PC's and two wireless printers. If I do try WPA(2), I post here.
I have WPA2-PSK with mac filtering and ssid broadcasting disabled. And I never had any problems, my router is linksys wag200 if it matters. Maybe you just do something wrong?
Wi-Fi and Active Sync
noris08 said:
i still have another problem, wich i have it since i bought the hd
i connect my laptop to my wifi router and it works great. i connect my hd to my wifi router and it works (again) great
but if i connect my hd to my laptop via usb and activesync, my laptop lose wifi connection. i reconnect it, keeps connection for few seconds and it loose it again.
any advice?
thank you!
Click to expand...
Click to collapse
Note: This may be in a slightly different place in ActiveSync on XP.
I have Windows Mobile Device Center on Vista and I had the same trouble until I went to Mobile Device Settings > Connection Settings > check "Allow data connections on device when connected to PC"
(see attachment)
Just noticed you said laptop loses wi-fi.... I assumed HD loses wi-fi. My bad.
This may or may not help some of you, but I found out (the hard way) that the WLAN pre-shared key "passphrase" may only be 12 bytes long. Any more and it will not work.
-Valynor
Since I bought the HD2 before 2 month and after 2 Rom upgrade I still have the same Wifi problem. I can connect to my home network and the Router can see the HD2 but I can not connect to the Internet through the Wifi. All other computers and PS3 connect just fine. Ip adress seems also ok.
Please help ?
I did have the same problem a while back, and it occured after I used the wifi router. Have you ever used that, even just to try it?
No I never tried the Wifi Router even once and changed rom twice.
quincy67 said:
No I never tried the Wifi Router even once and changed rom twice.
Click to expand...
Click to collapse
Probably not the same issue then. For some reason I had it trying to give me a static IP address that my router wouldn't allow (I've got MAC forwarding on my router to make sure that nothing other than the 4 things I have can connect to it).
When you connect to the wifi, can you open the router admin on your HD2?
Thanks for your help. No I cannot access the router from the HD2, could it be a proxy issue. I am not using a proxy for the internet
quincy67 said:
Thanks for your help. No I cannot access the router from the HD2, could it be a proxy issue. I am not using a proxy for the internet
Click to expand...
Click to collapse
No worries mate - I hope I can help!
It's not a proxy issue, if you're not using a proxy server. Could you try this and let me know how you get on?
Start your wifi connection
Go to all settings, connection, wifi, wireless networks, network adapters tab
Select the Broadcom DHD adapter
It should be set to use a server assigned IP address, not a static one. It probably is, but it's worth checking.
When I open Wifi settings I can only open advanced no wireless networks or network adapter tab. How do I get there ?
quincy67 said:
When I open Wifi settings I can only open advanced no wireless networks or network adapter tab. How do I get there ?
Click to expand...
Click to collapse
After you've started wifi, go to the settings tab, menu and all settings. Then carry on the instructions in the last post.
Found the all settings, the DHD adapter is set to server assigned. Any other ideas ?
...
Well i think we have the same problem.. If you try to connect your wireless, do you get the failure after pressing get IP: Cannot obtain serverassigned IP....
http://forum.xda-developers.com/showthread.php?t=627654 my thread was this..
I found out that if i you go under WIFI>ADVANCED>press on the NETWORKCARD under the field "SSID"> then go to the networkcard>Broadcom 802.11 DHD network adapter>remove the pin in use serverassigned, and write a static ip: example: IP: 192.168.1.23
UNDERMASK: 255.255.255.0
STANDARDgateway: 192.168.1.1
That helped for me, though i cannot use that fix because my college wont accept the static IP. so it works for like 2 mins and then it disconnect. hehe.
Heh - that would be pretty much my next suggestion.
Try a static IP address and see if that works. It's not a long-term solution, but it would determine whether it's your phone or the router that's having the problem.
Last time I set a static IP address, I liked it and left it like that, but I found (after a couple of days with no internet access) that it tries to assign the same IP address when you use your data connection for internet access. Your service provider is very unlikely to allow you to use the same IP address, so you probably can't connect.
Like I said, it's a test to see if you can connect - not a solution.
Do you know what IP addresses your router will allow you to use? Do you have a specified range of addresses, for example?
I have this exact same problem. I can connect to wifi networks at home, office, etc... But no network access. It connects to the AP's, gives me an IP Address, but I can't ping anything!
This thing gets more and more frustrating daily.
skwizod said:
I have this exact same problem. I can connect to wifi networks at home, office, etc... But no network access. It connects to the AP's, gives me an IP Address, but I can't ping anything!
This thing gets more and more frustrating daily.
Click to expand...
Click to collapse
It also happened to me. Turns out it was the router I was using. I bought a new one earlier today and problem solved!
Hi!
I got a d-link dgl-4300 router, and had problem getting a IP adr. from it. When I gave my HD2 a static IP it worked, but very slow. After I changed from DHD network adapter to NE 2000 compatible ethernet driver it get IP from router and I can browse internet through wifi fast. Maybe it can help u 2.
regards Xes.
On gpc_hd2_gingerbread_v1.6, with any Wi-Fi connection (home or work) HD2 can't connect any site in any browser. Manual setup network with IP address, Netmask, Gateway - no reaction.
If I typing in address line direct IP of any site, e.g. google (74.125.77.147) - WOW! site is loading.
With 2G connection HD2 has no problem.
Were is bug?
Sorry for my bad english...
wifi
wifi is k...
you don't know to set...
i set my wifi and connect to all the rooters...
change chanell on rooter..chose chanell 11.
have a nice day
Some strange things...
After six months of testing android on hd2 not encountered any problems with the Wi-Fi.
And now, with CWM flashing any other build - no problem, Wi-Fi works perfectly.
The strangest thing I have even experienced, and perhaps can save you time and headache.
** Summary (for those not wanting to read the whole story, but just the fix)
If your HD2 Android can connect to your home WiFi but cannot access Internet, check if your WiFi network uses a 192.168.20.x IP subnet address. The HD2 Android's USB port uses the same subnet, causing a conflict. If you change your home WiFi to use any other subnet, it will work fine.
** The Long Story
Been reading and admiring all the Android developments in XDA-Developers for some time, finally decided it was time to give it a try. Picked one of the more popular and stable MDJ Froyo (Desire HD) for SD and loved it.
Problem is couldn't use the Internet via WiFi from my home. Internet via GPRS works fine, Internet via USB/PC works fine, just not WiFi. The connection to WiFi is successful, picks up a DHCP IP address just fine, but no Internet.
Oh well, perhaps there is a WiFi bug in HD2 Android not reported so never mind.
Wait! On a business trip, when HD2 Android connecting to the hotel's WiFi, Internet works fine! Subsequently in many other places WiFi works also flawlessly.
Must be the WiFi router at home. Not too surprising as I don't use much wireless but wired all my other computers (including notebook PCs), it is faster anyways.
So went back and tested WiFi on a notebook PC (prior to that upgraded the WiFi router's firmware), PC connects and works, but HD2 Android still not. Tried all kinds of WiFi and encryption combination (BGN, BG, G only, WPA2, WPA, WEP), just nothing works for HD2 Android. >> Conclusion: not the WiFi router at home, just HD2 Android working with this particular WiFi router.
Finally (but forgot what app it was), I saw the USB port binding to 192.168.20.x subnet, exactly the same as my LAN subnet in the WiFi router.
Bingo, changed the LAN subnet to something else (really anything is fine because it is inside a NAT so not an issue getting out to the Internet) and HD2 Android works like a charm.
Hope this helps.
sorry, can you explain more where to change in the router settings? i can't find anything to change in my wireless settings
Look up the LAN (local area network setting) in your router, where the IP address for most WiFi router is set to use 192.168.0.1
In my case the WiFi router is set to use 192.168.20.1 (and DHCP to pass out 192.168.20.x IP addresses).
By changing the IP address of the router, most router automatically change the DHCP assignment to corresponding subnet, say from 192.168.20.1 to 192.168.x.1
x can be any of 0 to 255, just not 20 for my case or it causes conflict with HD2 Android.
Hi Dear friend , And Thanks for sharing experiences.
I have the same problem , but my router's setting is :
IP Address : 192.168.1.1
and my Starting IP Address : 192.168.1.100
IP Pool Count : 101
DHCP : Enabled
NAT : Enabled
Default Route : YES
but no webpage loaded , the weather not work . but the meebo messenger
with my yahoo ID just worked .
so how can i fix it ?
tnx
I notice the conflict (with my 192.168.2.x) when I checked the HD2 IP addresses (after connecting to the WiFi). When I see the USB port bound to 192.168.2.x I know the two just conflict with each other.
If something (meebo messenger?) works but not others... could it be your HD2 not getting name resolution (DNS ?). Say if you try opening this do you get the Google page:
http://74.125.153.104/
** This is Google's page without the need to resolve via DNS.
webmice said:
I notice the conflict (with my 192.168.2.x) when I checked the HD2 IP addresses (after connecting to the WiFi). When I see the USB port bound to 192.168.2.x I know the two just conflict with each other.
If something (meebo messenger?) works but not others... could it be your HD2 not getting name resolution (DNS ?). Say if you try opening this do you get the Google page:
http://74.125.153.104/
** This is Google's page without the need to resolve via DNS.
Click to expand...
Click to collapse
hi my friend. I tested it with IP but nothing changed.
but some of the WebSites with SubDomain Loaded. like : http://2.farsihiphop.com
and can u tell me how can I know about the port nimber . like USB port.
i think my Android's Kernels have been changes. maybe i'll can find something like this (equal IP address)
thanks.
I have following problem : At my university i have hidden Wifi network, locked with password.. But, ofcourse, we cracked their password, and now we can use their WiFi.. But i cant use it.. On WM i could use it .. One more thing to mention, there is a proxy u need to setup before u can go on internet trough that Wifi network.. but thats not my concerne yet.. I cant get connected to that Wifi.. I make new conn, with password and other settings, and it keep saying : Connecting... Disconnected...
Any ideas to help me ?
Thanks in advance
I had the same problem. I solved it by updating the radio to version 2.14.50.2. I think this version works best.
For me 2.15.50.14 works, too...