Related
I am having weird problems getting this to work. Last week I messed up my usb port on my phone. GPS has always worked fine on my phone. I've been using the Telus server for months. I got a new XV6800 from Verizon and put the same version rom and radio that I had on the original one with all the same software. I did the aGPS fix and now it doesn't work. On my original phone as soon as something would access the gps hardware it would make a data connection or activate the connection if it was already there. This phone doesn't make a data connection at all. No matter what I do it will not make a data connection. Made the registry and QPST settings exactly the same as the original phone. I even put my battery in the original phone and ran a gps tool and it tried to make a data connection. What could be going on here??? I am out of ideas.
Can you get a data connection with IE. If not you need to do a hard reset and then try again.
My friend had an XV6800 AND got a new one from Verizon a week before me and has the same exact problem. Yeah, I can get a data connection fine with IE. GPS just doesn't initiate a connection anymore on this phone. Its like it doesn't even try to use agps. The only differences I could find are these. Not sure if this matters:
New Phone
PRL Version: 51433
PRI Version: 2.03_002
Old Phone
PRL Version: 51345
PRI Version: 1.35_002
Are you running the stock MR1 or MR2 rom
Nope, using the same rom and radio that I used all along on the old phone.
DCD 3.2.6
Radio 3.42.30
isn't there a verision cab file you have to run to fill in the network and password info to access the data network?
typhoonk said:
isn't there a verision cab file you have to run to fill in the network and password info to access the data network?
Click to expand...
Click to collapse
I never said I was having an issue with a data connection at all. I fixed the issue already. The new rom that the phone came with had a PRI version that blocked GPS. I had to flash an older Verizon radio and rom and then flash the new radio and dcd rom to fix it. Phone is fine now.
I just flashed my Sprint Mogul 6800 with wm6.5 build 21501. Google maps worked perfect yesterday. Today google maps can't find a gps and tries to connect with the internet sharing connection I setup last night. Anybody have any ideas?
Thanks in advance.
mnetwork said:
Nope, using the same rom and radio that I used all along on the old phone.
DCD 3.2.6
Radio 3.42.30
Click to expand...
Click to collapse
From what I've read in the Upgrading section even if it came with MR1 or MR2 you must first flash to a stock Verizon ROM that is PRE MR1, then flash your custom ROM, then set up your aGPS settings in QPST and then it should work fine again.
Hope that helps.
EDIT: It may be a pre-GPS (no GPS support) Verizon ROM that you need to flash with. I don't have Verizon so I am no 100% sure.
unL33T said:
From what I've read in the Upgrading section even if it came with MR1 or MR2 you must first flash to a stock Verizon ROM that is PRE MR1, then flash your custom ROM, then set up your aGPS settings in QPST and then it should work fine again.
Hope that helps.
EDIT: It may be a pre-GPS (no GPS support) Verizon ROM that you need to flash with. I don't have Verizon so I am no 100% sure.
Click to expand...
Click to collapse
Look up two posts above yours.
mnetwork said:
Look up two posts above yours.
Click to expand...
Click to collapse
Ah yes. I fail at reading I guess.
unL33T said:
Ah yes. I fail at reading I guess.
Click to expand...
Click to collapse
Np. Thanks anyway.
Don't know if it helps in this case... But I had the same problem today... I used my GPS 2 days ago and then for seemingly no reason I could not get a lock today. I soft and hard reset 3 times with no luck. About 30min later I remembered that I installed one of those stealth programs (in case you lose or get you phone stolen you can sms your phone and it will send you the GPS coords of where it is) so I uninstalled it and Voila! I had a lock in seconds. Is it possible that you are getting a compatibility issue with a program that you thought nothing of at the time of install?
Just a thought, hope it helps
What program were you using??
mnetwork said:
What program were you using??
Click to expand...
Click to collapse
Not sure if you were asking me, but if so it was Smart Phone Tracker 1.37.0.0
I am having similar issues.
The GPS will lock... but takes forever and is not using data to do it.
I have checked and double checked everything, but its exactly as the wiki says it should be.
Running Custom build off of the 21042 Kitchen... 3.42.50 Radio
For anyone who cares, I solved my problem.
http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
step 12... I changed the Position Calculation from PDE to mobile, as per some notes I found from Shadow-Tech.
http://forum.ppcgeeks.com/showthread.php?t=36377&highlight=soft+key
Awesome find, mine did not work until I changed my settings to mobile. Thanks alot
I am on the 3 Network(UK), my phone is branded, no lagfix, no root, im on froyo 2.2 oficial upgrade through kies.
Can someone please give me a simple step by step guide on how to upgrade to the JPY 2.2.1 firmware please, i have the 3 button recovery option btw.
Thank you in advance.
Simple: flash with odin (read the stickies...)
Simpler: apply Kies registry hack http://forum.xda-developers.com/showthread.php?t=835628&highlight=kies+registry+hack Product Code XEU
GMH24 said:
Simple: flash with odin (read the stickies...)
Simpler: apply Kies registry hack http://forum.xda-developers.com/showthread.php?t=835628&highlight=kies+registry+hack Product Code XEU
Click to expand...
Click to collapse
I'd go for a custom rom jpy based like docs or darkys and install through clockwork or you can go to samfirmware to download jpy and use odin to flash it up to you or just do as above and use patcher but jpy is definetly worth it.
The first time i tried the kies patch utility i got a messags saying there were more than 1 phone folders which threw me a bit, but managed to sort it in the end.
So now on ....
2.2.1
I9000xxjpy
2.6.32.9
[email protected] #1
froyo.xxjpy
Whoooohhooooooooo
Would you please share how you did it
jaytwo said:
The first time i tried the kies patch utility i got a messags saying there were more than 1 phone folders which threw me a bit, but managed to sort it in the end.
So now on ....
2.2.1
I9000xxjpy
2.6.32.9
[email protected] #1
froyo.xxjpy
Whoooohhooooooooo
Click to expand...
Click to collapse
Hi Jaytwo,
I have the same rom version as you on 3UK. I'm also trying to upgrade to 2.2.1. Could you please share you you did the upgrade. what values do i need to select from the registry patcher.
Thanks in advance for you help.
Kayno9 said:
Hi Jaytwo,
I have the same rom version as you on 3UK. I'm also trying to upgrade to 2.2.1. Could you please share you you did the upgrade. what values do i need to select from the registry patcher.
Thanks in advance for you help.
Click to expand...
Click to collapse
Hi Kayno
Set the "Enable Spoof" to True
Set "Spoof product code as" to XEU from the list
Then click on the Write Regstry button in the bottom right
Thats all you have to do, then voila when you start kies and connect your phone you should have a popup saying a firmware upgrade is available.
Good luck
jaytwo said:
Hi Kayno
Set the "Enable Spoof" to True
Set "Spoof product code as" to XEU from the list
Then click on the Write Regstry button in the bottom right
Thats all you have to do, then voila when you start kies and connect your phone you should have a popup saying a firmware upgrade is available.
Good luck
Click to expand...
Click to collapse
Thanks for the prompt repy Jaytwo.
I'll have a go and keep you updated.
jaytwo said:
Hi Kayno
Set the "Enable Spoof" to True
Set "Spoof product code as" to XEU from the list
Then click on the Write Regstry button in the bottom right
Thats all you have to do, then voila when you start kies and connect your phone you should have a popup saying a firmware upgrade is available.
Good luck
Click to expand...
Click to collapse
Also did you save the Rom through Kies. Was a bit confused when i read this part on the Kies Registry patcher thread.
By the way hows your experience with the new firmware been so far. Is 3G and WIFI working correctly. Have you tried the app market. Hows the overall speed of the phone and is gps working better now.
Sorry for all these questions but i just wanted to determine whether the risk of updating is worth it.
cheers
Thanks
Kayno9 said:
Also did you save the Rom through Kies. Was a bit confused when i read this part on the Kies Registry patcher thread.
By the way hows your experience with the new firmware been so far. Is 3G and WIFI working correctly. Have you tried the app market. Hows the overall speed of the phone and is gps working better now.
Sorry for all these questions but i just wanted to determine whether the risk of updating is worth it.
cheers
Thanks
Click to expand...
Click to collapse
No, i didnt save the Rom, 3g and Wifi are working fine but you will lose the My3 app because you will be basicly debranding your fone(if you are on contract), but if you start the default browser it takes you direct to My3 .
Havnt tried GPS , dont use it tbh.
The speed of the phone is so much smoother imo, im so glad i upgraded.
Hope that helps
jaytwo said:
No, i didnt save the Rom, 3g and Wifi are working fine but you will lose the My3 app because you will be basicly debranding your fone(if you are on contract), but if you start the default browser it takes you direct to My3 .
Havnt tried GPS , dont use it tbh.
The speed of the phone is so much smoother imo, im so glad i upgraded.
Hope that helps
Click to expand...
Click to collapse
Thats great news. Can you still use the three services though? Because i'm paying a lot of money for contract don't want to be losing my data allowance
Thanks for help again. I'm about to flash it. Fingers crossed.
Kayno9 said:
Thats great news. Can you still use the three services though? Because i'm paying a lot of money for contract don't want to be losing my data allowance
Thanks for help again. I'm about to flash it. Fingers crossed.
Click to expand...
Click to collapse
Jaytwo,
My installation failed. Did you manage to flash it on the first go. I did exactly as you said. The thing is it finishes downloading in about 15 mins then fails installation. I also had the multiple folder detected problem. I clicked on ok on the registry patcher to delete the folder and re-started keys with the sgs connected.
The phone disconnects and after about couple of minutes is says Failed to convert to upgrade mode. Please try later.
Does anyone else know how to fix this? Am i doing anything wrong
thanking you in advance
Yes it flashed first time for me.
When the phone disconnected did you do anything?
I noticed when i flashed that the phone disconnected but i didnt touch anything and left it to carry on, it took a while but all went well in the end.
Try flashing again, just to check do you have the 3 button recovery option on your phone?
jaytwo said:
Yes it flashed first time for me.
When the phone disconnected did you do anything?
I noticed when i flashed that the phone disconnected but i didnt touch anything and left it to carry on, it took a while but all went well in the end.
Try flashing again, just to check do you have the 3 button recovery option on your phone?
Click to expand...
Click to collapse
Hi Jaytwo,
I have not touched the phone when it disconnected as i remember from a previous upgrade to Froyo from Eclaire when it disconnected and then reconnected before completing the upgrade.
I have the 3 button recovery i checked it. The wierd thing is the phone did not reboot to downloading mode where the yellow android digging man picture appears. The phone stays as it is. I wonder whether samsung changed anything recently.
kingconnought, on the main registry patcher thread also mentioned he is experiencing the same problem.
Can anyone else help.
Thanks again
I dont understand why your phone will not go into download mode as that is part of the flashing process.
Try doing a factory reset through settings on your phone, then try flashing again, apart from that im not sure what else you can do apart from flashing thru odin?
jaytwo said:
I dont understand why your phone will not go into download mode as that is part of the flashing process.
Try doing a factory reset through settings on your phone, then try flashing again, apart from that im not sure what else you can do apart from flashing thru odin?
Click to expand...
Click to collapse
Thanks Jaytwo,
I will try factory restting. See if is works although i will have to go throught the pain of reinstalling all apps again.
By the way did you lose all your apps and data after the upgrade?
Kayno9 said:
By the way did you lose all your apps and data after the upgrade?
Click to expand...
Click to collapse
No, thats the reason i wanted to upgrade thru kies as it keeps all your settings and apps, the only app i lost was the My3 one.
Hope its second time lucky for ya
jaytwo said:
No, thats the reason i wanted to upgrade thru kies as it keeps all your settings and apps, the only app i lost was the My3 one.
Hope its second time lucky for ya
Click to expand...
Click to collapse
LOL... This will be my 5th time.
By the way i thought il tell you this. If you ever want to for God knows whatever reason re-brand your phone to 3 then select the H3G product code and it should Flash your phone to the latest 3 branded Froyo which is JP5.
If i have to resort to Odin then i might as well wait for 3 to update their version to 2.2.1 as im too scared to Flash via Odin as there is too many risks associated with it. Or who knows Samsung may decide to release another version which might work.
Thanks
I got a quick question about this subject. Ik have no experience without android firmware flashing. Do ik need to backup stuff like imei number? For when the **** hits the fan. And if so how do ik do that?
*edit
found the answer to my own question here: http://forum.xda-developers.com/showthread.php?t=723596
Sent from my GT-I9000 using XDA App
jaytwo said:
No, thats the reason i wanted to upgrade thru kies as it keeps all your settings and apps, the only app i lost was the My3 one.
Hope its second time lucky for ya
Click to expand...
Click to collapse
not a good idea anyway.. there are a multitude of issues after upgrading os and not doing a factory reset...
Kayno9 said:
LOL... This will be my 5th time.
By the way i thought il tell you this. If you ever want to for God knows whatever reason re-brand your phone to 3 then select the H3G product code and it should Flash your phone to the latest 3 branded Froyo which is JP5.
If i have to resort to Odin then i might as well wait for 3 to update their version to 2.2.1 as im too scared to Flash via Odin as there is too many risks associated with it. Or who knows Samsung may decide to release another version which might work.
Thanks
Click to expand...
Click to collapse
Jaytwo,
It was 5th time lucky thanks to your recommendation to factory reset the phone. i factory set the phone again after upgrade and it is taking off like a rocket. Still yet to check everything but i have lost access to My3 as you said. I will let you know if i can manage to get access again.
Thanks for all your help mate. I apreciate it
Does anybody know or has had success flashing a t mobile rom, whether it be stock or customized rom, on a retail Verizon note 3?
I've read reports that flashing using Odin will brick...
But how about using safestrap.
The reason why I want to, is because I would like to completely switch over to tmobile from Verizon. But still keep my phone...
As well has anyone had experience with getting wifi texting/calling to work on a Vz Note 3 retail?
I wish for this thread to be a place where devs, users are able to share and maybe find a solution. Any help or advice would greatly be appreciated
I did flash a t mobile rom on my verizon note 3. I used safestrap. I was getting errors about wifi calling and it would give me a SIM card error every now and then. But over all it worked fine. Just add Verizon's data info in so your text messaging will work.
Cant get tmobile to work
Can someone please point me in the right direction........i am just trying to get my VZ note 3 to get tmo services to work, but no matter what i do, nothing works...
I have tried on the stock rom before rooting or anything following these steps listed in OP== NO DICE
I have rooted, installed safestrap 3.75 b4 and tried the steps again===NO DICE
I have installed a custom rom, specifically jasmine rom 2.0( which requires to flash the NC2 modem afterwards, which i did successfully) in hopes that that would help and====NOOOO DICEEEE
i can't access any service menu listed in this whole WEBSITE, none will work, not even an app from the play store that executes them....
I just keep getting that stupid INVALID SIM error and the bars indication stay blank and nothing happens.....WHAT THE #&@% AM I MISSING????
I HAVE NEVER RAN INTO SO MANY ISSUES BEFORE, im not a newbie in flashing stuff or anything like that, been using XDA since teh Windows Mobile days in HTC's prime, but this has be off the wall.
ANY HELP at all would be appreciated....since im the only asswhole that cant seem to have tmobile work on the VZ Note 3.......
comweasel said:
I did flash a t mobile rom on my verizon note 3. I used safestrap. I was getting errors about wifi calling and it would give me a SIM card error every now and then. But over all it worked fine. Just add Verizon's data info in so your text messaging will work.
Click to expand...
Click to collapse
Which rom did you flash?
Sent from my SM-N900V using xda premium
Ok I would just like to let every one know I managed to get it to work. I odined back to stock and then started the processed all over and now it has come to work ALL OF SUDDEN, as if I didn't try the same crap an hour ago.........think it's my wife playing vudoo games on me....who knows
http://forum.xda-developers.com/note-3-tmobile/development/rom-decepticon-v1-july-1-2014-t2802168
I used this rom here on xda hope I don't get in trouble for posting the link.
Rom is called decepticon.
comweasel said:
http://forum.xda-developers.com/note-3-tmobile/development/rom-decepticon-v1-july-1-2014-t2802168
I used this rom here on xda hope I don't get in trouble for posting the link.
Rom is called decepticon.
Click to expand...
Click to collapse
Thank you. How's you enable data on it?
Sent from my SM-N900V using xda premium
comweasel said:
I did flash a t mobile rom on my verizon note 3. I used safestrap. I was getting errors about wifi calling and it would give me a SIM card error every now and then. But over all it worked fine. Just add Verizon's data info in so your text messaging will work.
Click to expand...
Click to collapse
have you tried putting in a t mobile sim in the phone to see if wifi calling would work using tmobile service??
comweasel said:
I did flash a t mobile rom on my verizon note 3. I used safestrap. I was getting errors about wifi calling and it would give me a SIM card error every now and then. But over all it worked fine. Just add Verizon's data info in so your text messaging will work.
Click to expand...
Click to collapse
What do you mean by adding Verizon data info?
Sent from my SM-N900V using XDA Free mobile app
lewster291 said:
have you tried putting in a t mobile sim in the phone to see if wifi calling would work using tmobile service??
Click to expand...
Click to collapse
No I have not. T-Mobile is not in my area to try this. Sorry.
---------- Post added at 11:45 AM ---------- Previous post was at 11:30 AM ----------
kevace1 said:
What do you mean by adding Verizon data info?
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
I went in to the Mobile networks Setting and added the APN info for Verizon.
Has anyone ever tried flashing the T-Mobile modem to activate the WCDMA 1700 band? Is that's what's needed to activate this band or is there more to it? I know wih LG devices, by flashing the complete software of a different carrier changes the band settings as well
I'm assuming no one has any interest in doing this? WCDMA 1700 is needed for HD voice for T-Mobile....
Hey guys,
I'm new to the forum so please excuse me if this is the wrong place to post this. I'll start from the beginning. I bought a Galaxy S4 (SGH-I337m) from somebody in my city. They said the phone originally worked with Rogers/Fido, but that they switched the logic board on it so now it works with Bell/Virgin. The thing is though, when I put my Virgin Mobile sim card in the phone, it won't let me send texts or make calls. I checked the IMEI and it's not blacklisted or anything.
It says No Service and has the little circle with a diagonal line showing up in the notification bar and when I try to send a text, it says No Network Connection (No signal found for mobile networks). I find it weird because I still get a notification saying that I have an unheard voicemail.
I've tried resetting the phone multiple times. I've also tried flashing both the Bell and Virgin Mobile Lollipop firmwares and that didn't work either. To be honest, I'm not sure how to tell which one I would need to install. I noticed when trying to flash the Bell firmware, that the phone kinda skips to a black screen quickly every time I close an app. I'm assuming that would mean it needs the Virgin Mobile firmware.
That still doesn't fix the mobile network issue though. If anyone could help me out, I would GREATLY appreciate it!!!! Here is a bit of info, I'm hoping it helps. If you need anything else, please let me know.
Model number: SGH-I337M
Android Version: 5.0.1
Baseband Version: I337MVLUGOC4
Build Number: LRX22C.I337MVLUGOC4
Also, in the "Status" menu, I noticed it says:
Service State
Voice: Out of Service / Data: Out of Service
Not sure if that has anything to do with it or if that's normal. Again, if you have any suggestions, PLEASE let me know. I'm super desperate as I can't afford to lose the money I paid for this. Thanks in advance.
EDIT: Coincidentally my girlfriend has a Galaxy S4 of the same model and with Bell/Virgin. I opened up the ABOUT DEVICE menu in both phones and the only other difference I noticed is on hers it says:
SE for Android Status:
"sepf_sgh-I337M_5.0.1_0013"
And mine says "sepf_sgh-I337M_5.0.1_0009"
Does that have anything to do with it maybe?
TeknikalMusic said:
Does that have anything to do with it maybe?
Click to expand...
Click to collapse
Install this APP and add all screenshots pls .
Okay, will do. I will post the screenshots in about 20 mins. I rooted the phone, installed CWM and am in the middle of flashing the latest firmware again. I forgot to enable USB debugging before flashing originally and I wanted to install CWM to wipe the cache. No idea if that would make a difference but I've been up all night trying anything lol. Thank you for the reply though, will post the screenshots in about 20 mins.
TeknikalMusic said:
Okay, will do. I will post the screenshots in about 20 mins. I rooted the phone, installed CWM and am in the middle of flashing the latest firmware again. I forgot to enable USB debugging before flashing originally and I wanted to install CWM to wipe the cache. No idea if that would make a difference but I've been up all night trying anything lol. Thank you for the reply though, will post the screenshots in about 20 mins.
Click to expand...
Click to collapse
Don't flash more things atm for avoid one brick pls :highfive:
Joku1981 said:
Don't flash more things atm for avoid one brick pls :highfive:
Click to expand...
Click to collapse
Okay, I have the app installed. Which screens should I screenshot? I know you shouldn't post your IMEI online, so I'm assuming I skip the "personal" tab or?
Here is 4 of the screenshots I took (I hope this works lol)
Here are the other 2 I took
TeknikalMusic said:
Here are the other 2 I took
Click to expand...
Click to collapse
All seems correct but I think your device works for Bell Mobile (BMC) only but NOT for Virgin Mobile (VMC). Try to use one BELL simcard for verify it.
Joku1981 said:
All seems correct but I think your device works for Bell Mobile (BMC) only but NOT for Virgin Mobile (VMC). Try to use one BELL simcard for verify it.
Click to expand...
Click to collapse
In all my experience, Bell/Virgin are always interchangeable. Same with Telus/Koodo and Rogers/Fido. I tried putting a Bell sim card in though just now and it still has the problem. It doesnt load any of the signal bars or anything. Oddly enough, when there is no sim card in the phone, the bars show up?
TeknikalMusic said:
In all my experience, Bell/Virgin are always interchangeable. Same with Telus/Koodo and Rogers/Fido. I tried putting a Bell sim card in though just now and it still has the problem. It doesnt load any of the signal bars or anything. Oddly enough, when there is no sim card in the phone, the bars show up?
Click to expand...
Click to collapse
Don't doubt it and return it if you can still.
Joku1981 said:
Don't doubt it and return it if you can still.
Click to expand...
Click to collapse
Since it was from Bell, would flashing the Virgin Mobile firmware somehow mess it up? What are the exact steps I would need to take to try to reset it back to stock settings? I'm wondering if I'm missing anything. Or if the APN settings have anything to do with it? I set them to default already and tried adding the Virgin Mobile Canada apn settings as well
http://forum.xda-developers.com/galaxy-s4-att is the proper place to ask your questions regarding your S4, rather than where you originally posted this, the International S4 forum. Since more people with your device will be available at the given link, you may want to ask your questions over there. Or simply be patient, as this thread will be moved over there in due time.
So I know this is a weird issue. I've done my research and tested way too many times before posting this up
OK, so the problem is that I can't send or receive MMS on my LTE network. Also, I believe this causes me to have problems with my GPS as it sometimes it can be detected and sometimes it won't.
The steps I've taken to rectify the problem:
1. Completely unrooted phone and flashed stock firmware from sammobile.com.
2. Checked if MMS and maps were working on the stock firmware and they were. I checked the USSD code using *#1234# in the dialer and it was working.
3. Done the rooting process and flashed new recovery and new ROM.
4. Tried to send MMS and issue persisted again. Also, when I send the MMS it disconnects my LTE and stays disconnected till I reconnect again.
5. I checked the USSD again and it says "Connection problem or invalid MMI code"
6. I have flashed so many different modems and bootloaders and the problem is still there. Unless I unroot and stick to my network provided ROM.
7. I checked APN settings, manually set new ones up using the network APN settings and still nothing.
What is the problem here? Is it my phone? A hardware issue? WHAT THE..
Any help is appreciated :fingers-crossed::fingers-crossed::fingers-crossed:
gspotr said:
So I know this is a weird issue. I've done my research and tested way too many times before posting this up
OK, so the problem is that I can't send or receive MMS on my LTE network. Also, I believe this causes me to have problems with my GPS as it sometimes it can be detected and sometimes it won't.
The steps I've taken to rectify the problem:
1. Completely unrooted phone and flashed stock firmware from sammobile.com.
2. Checked if MMS and maps were working on the stock firmware and they were. I checked the USSD code using *#1234# in the dialer and it was working.
3. Done the rooting process and flashed new recovery and new ROM.
4. Tried to send MMS and issue persisted again. Also, when I send the MMS it disconnects my LTE and stays disconnected till I reconnect again.
5. I checked the USSD again and it says "Connection problem or invalid MMI code"
6. I have flashed so many different modems and bootloaders and the problem is still there. Unless I unroot and stick to my network provided ROM.
7. I checked APN settings, manually set new ones up using the network APN settings and still nothing.
What is the problem here? Is it my phone? A hardware issue? WHAT THE..
Any help is appreciated :fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Which custom rom?
Lennyz1988 said:
Which custom rom?
Click to expand...
Click to collapse
Here bro..
Hi,
gspotr said:
4. Tried to send MMS and issue persisted again. Also, when I send the MMS it disconnects my LTE and stays disconnected till I reconnect again.
Click to expand...
Click to collapse
I have no answer to this, but you're not alone.
See : http://forum.xda-developers.com/galaxy-s4/help/i9506-temaseks-unofficial-cyanogenmod-t3204676
As far as I can tell, we're both having the same issue with MMS.
I recently tried various things, including a fresh ROM re-install (with everything wiped) : with the stock ROM, MMS are working fine but with anything CM 12.1 based, they aren't (unless I'm connected to WiFi, as I explained in my post, which points to a data connection management issue).
I also tried the latest modem available (CM 12.1 based roms were using XXUDOC5, I'm now on XXUDOF2), to no avail.
Have a nice day all
Felindril said:
Hi,
I have no answer to this, but you're not alone.
See : http://forum.xda-developers.com/galaxy-s4/help/i9506-temaseks-unofficial-cyanogenmod-t3204676
As far as I can tell, we're both having the same issue with MMS.
I recently tried various things, including a fresh ROM re-install (with everything wiped) : with the stock ROM, MMS are working fine but with anything CM 12.1 based, they aren't (unless I'm connected to WiFi, as I explained in my post, which points to a data connection management issue).
I also tried the latest modem available (CM 12.1 based roms were using XXUDOC5, I'm now on XXUDOF2), to no avail.
Have a nice day all
Click to expand...
Click to collapse
Hey bro, thank you for your reply.
I have the same issue. It works when I'm on Wi-Fi too.. so no solution to this? =(
gspotr said:
Hey bro, thank you for your reply.
I have the same issue. It works when I'm on Wi-Fi too.. so no solution to this? =(
Click to expand...
Click to collapse
http://forum.xda-developers.com/search.php?searchid=388567062
As that rom is based on this rom, search this thread for anything related to mms. If it works on wifi then it's 100% a wrong apn setting or maybe a bug.
Lennyz1988 said:
http://forum.xda-developers.com/search.php?searchid=388567062
As that rom is based on this rom, search this thread for anything related to mms. If it works on wifi then it's 100% a wrong apn setting or maybe a bug.
Click to expand...
Click to collapse
It's definitely a bug. I've already tried everything to do with my providers APN. I installed so many modems as well no luck whatever. I'm pretty sure is an easy, small script that is an easy fix for a developer =/
gspotr said:
It's definitely a bug. I've already tried everything to do with my providers APN. I installed so many modems as well no luck whatever. I'm pretty sure is an easy, small script that is an easy fix for a developer =/
Click to expand...
Click to collapse
I don't think the fix is that easy for them because there are already a few patches applied in the past for MMS. Your best bet would still be to search that thread I gave you and see if someone came up with a fix.
Lennyz1988 said:
http://forum.xda-developers.com/search.php?searchid=388567062
Click to expand...
Click to collapse
Thanks but we cannot use that search link you gave us... ("Sorry - no matches. Please try some different terms. ")
Which thread were you pointing at, please ?
Cheers !
Felindril said:
Thanks but we cannot use that search link you gave us... ("Sorry - no matches. Please try some different terms. ")
Which thread were you pointing at, please ?
Cheers !
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...lop/exclusive-antaresone-alucard24-s-t3066696
Search for "mms".
Lennyz1988 said:
http://forum.xda-developers.com/gal...lop/exclusive-antaresone-alucard24-s-t3066696
Search for "mms".
Click to expand...
Click to collapse
Thanks bro, I'll give it a go when I get home from work tonight..
Lennyz1988 said:
Search for "mms".
Click to expand...
Click to collapse
Thanks a lot, the fix was in there : http://forum.xda-developers.com/gal...lucard24-s-t3066696/post62511742#post62511742
I'm still wondering why that fix that's been added in CM 12.1 since august wasn't in our "custom" CM 12.1 roms but still... IT WORKS !
Have a nice day !