Red earpiece - EVO 4G General

So, i was REALLY in to the red earpiece...or speaker...whatever...that they originally had on the EVO, so i decided to buy a sharpie and do it myself, turned out pretty well! Any imperfections are UNDER the hole punched metal piece, or are just reflections from lights in my room learned that after drawing on it a couple times. If anyone is interested in doing this, warning, it probably voids warranty, but you could probably get it off fairly easily if you use a paper clip and a napkin with some type of remover on it though. Also note, if you do this, you need the fine point sharpies, and need to press in to the corners a bit to shape the tip to them, won't get all of it otherwise. Pictures:
NOTE: it has been proven that this can be removed using a q-tip and rubbing alcohol:
Geniusdog254 said:
[*]The stuff does come off quite easily with a Q-TIP dipped in alcohol (GermX works too, it's 95% alcohol after all lol)
Click to expand...
Click to collapse
use this type of sharpie!:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pictar 1
Lol'd at the ghetto system i had for taking the picture, had my old phone as the weight on the back arm of the webcam too .
pictar 3
pictar 4

wow, turned out better than I would have imagined. I suppose the color choices would be endless given the wide array of sharpie colors available. hmm, the possibilities.

cesjr02 said:
wow, turned out better than I would have imagined. I suppose the color choices would be endless given the wide array of sharpie colors available. hmm, the possibilities.
Click to expand...
Click to collapse
I agree, but with the metal being more grey and not white, you might have problems with colors like yellow or pink. Otherwise, i think you would be good to go, the darker, the better i would say. But, thanks .

Wow that came out really nice, I might have to pick up a red sharpie today

i always envied the incredible because of this...sweet....

Hm I'm def. gunna buy a red sharpie today!
One thing I'm worried about though is removing it. Has anyone actually tried to get it off how the OP mentioned? If it comes off fine I'll definitely be doing it!
EDIT: Also, how does the LED look with this? Does it get miscolored at all?

very nice.

Looks great. Id be too scared though lol.
Doesn't come off meaning warranty is pointless

Is the visibility of the led affected?
From Team HTC Evo.

I would love to hear the reason for denying a warranty claim due to this...but that being said I'm sure a Q-Tip SLIGHTLY moistened with Goof-Off would take it right off.

Coloring the vent doesn't affect the warranty, as it does not change anything in respect to operation and functionality.

Rubbing alcohol will easily remove sharpie. Less of a chance screwing something up with that vs. goof-off.

Sharpie also makes paint pens if you are interested in a more permanent solution.

Going to have to get s sharpie now.. I've also liked the red piece as well. Don't see why they changed it in the first place.
Like others have asked.. does the LED still light up fine?
Sent from my PC36100 using XDA App

jkinnison90 said:
Like others have asked.. does the LED still light up fine?
Click to expand...
Click to collapse
No effect at all works fine

Awesome xD. Gonna have to do this now.
Sent from my PC36100 using XDA App

Alright, against my better judgement I did this myself. Here's my results:
First off, its REALLY difficult to get the very corners. I ripped up the end of my Sharpie in the process
The stuff does come off quite easily with a Q-TIP dipped in alcohol (GermX works too, it's 95% alcohol after all lol)
Its also damn near impossible to get it out of the very top corners (assuming you can get it there to begin with) but it can be done
The amber LED isn't impeded at all, but there is a center stripe on mine where the green LED is slightly blocked.
Here's a pic of mine: http://twitpic.com/29iq8a

To all those questioning if the LED is affected, no, it isn't, works like a charm! There is absolutely no downside to this in my opinion, even if it didn't come off, i would simply tell the guy at the sprint store it came that way if need be. And to the guy above, you used a fine tip one right? i mean all i did was push it in to one corner to shape the tip, thenwent all around, even the inner corners on each end work fine when you really push it in there(that's what she said). I tried a regular sharpie originally, and it DOES NOT WORK, i was worried if i pushed it in too hard, some of the ink would saturate out of the tip and in to the actual internals with a regular sharpie, so if you guys want to do it easily, use a fine point sharpie.

TickLe MY eLMo said:
To all those questioning if the LED is affected, no, it isn't, works like a charm! There is absolutely no downside to this in my opinion, even if it didn't come off, i would simply tell the guy at the sprint store it came that way if need be. And to the guy above, you used a fine tip one right? i mean all i did was push it in to one corner to shape the tip, thenwent all around, even the inner corners on each end work fine when you really push it in there(that's what she said). I tried a regular sharpie originally, and it DOES NOT WORK, i was worried if i pushed it in too hard, some of the ink would saturate out of the tip and in to the actual internals with a regular sharpie, so if you guys want to do it easily, use a fine point sharpie.
Click to expand...
Click to collapse
I used a fine tipped Sharpie, it was the kind that clicks like a pen too, but it was definitely the fine point. There's tiny part ~.5mm in each corner I couldn't get that you can only see if you look straight at the phone, but it isn't that big a deal.

That's flippin sweet. I'm going to pick me up a sharpie tomorrow.

Related

Pimp My MDA VArio!

Today I though,.... hmmmm What would I do with my vario since there is no more Tmobile guarantee for me ..
WELL.. I though my phone looks like crap
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.ahuntjens.nl/dev/VARIO/IMG_1459.JPG
So why dont I make it prettyer
I started to strip the vario first
then, I spraypainted it
Now I am just waiting for the paint to dry,... So I start testing the vario without any Housing
http://www.ahuntjens.nl/dev/VARIO/IMG_1484.JPG
http://www.ahuntjens.nl/dev/VARIO/IMG_1483.JPG
http://www.ahuntjens.nl/dev/VARIO/IMG_1485.JPG
+ I cleaned the inside + Screen!
http://www.ahuntjens.nl/dev/VARIO/IMG_1478.JPG
then I cleaned the Slide mechanism...( wich was not clicking anymore)
http://www.ahuntjens.nl/dev/VARIO/IMG_1479.JPG
And I have ome previews for you guys
http://www.ahuntjens.nl/dev/VARIO/IMG_1481.JPG
http://www.ahuntjens.nl/dev/VARIO/IMG_1482.JPG
http://www.ahuntjens.nl/dev/VARIO/IMG_1480.JPG
Tomorrow update with new pix
Looks great!!! Would love to see the final pics! Great job!
Is that an electronic butt plug in your second photo?! Pimp'd indeed!
Looking forward to the finished result...
V
nnnnnniiiiiiiiiiiccccccccceeeeeeee...
UPDATE: Hmm.. I took a second look on your pictures, I wonder how do you tend to paint over the buttons? Or, probably you can live with the top two button being icon-less, but it wouldn't be that great if the bottom green/red phone buttons are all covered in paints. Gives a close shots on how you handle the buttons
That's really cool, man! I haven't seen anyone do anything like that to a Vario yet. Right on.
update
I am still not happy with the result. I couldnt wait for the paint to fully dry... So I allready put it together, and I think I damaged the paintjob now with my fingerprints....
but... Its allready better then before
Im going to redo it soon
The Pimpin' looks good but I am wondering what is on the pad below the phone..... I have been twisting my laptop around trying to get the best angle to see things, but to no avail..... your handwriting is not the best!!
bilbo_28 said:
The Pimpin' looks good but I am wondering what is on the pad below the phone..... I have been twisting my laptop around trying to get the best angle to see things, but to no avail..... your handwriting is not the best!!
Click to expand...
Click to collapse
haha its Dutch.... AND My handwriting is not so good
Think you need to rub the whole phone down with wet and dry sandpaper, very very fine paper you can get from car repair shops. once that is done and its silky smooth, then apply the paint in thin layers, leave 20 minutes between each layer and do 3 or 4
Then leave for 24 hours and then apply a coat of clear laquer, again 3 to 4 coats with gaps of 20mins, that should leave it finished to the same standard as a car :>
Hmm.. you have seems seriously spoilt your paint job. I did a search, and it seems that sanding your paint with rough and then ultra fine paper may do the job. Take a look at this
http://www.bit-tech.net/news/2006/09/27/Scratched_up_DS_Lite_Mod/
Or if you want, you can do a ultra mirror glossy one. There is a tutorial here, seems very difficult, especially Wizard's back un-even surface.
http://www.mnpctech.com/case-mod-paint-computer-pc-case-mod-how-to.html
http://www.xtremesystems.org/forums/showthread.php?t=89422
I wonder how much paint job it the cover can sustain. You don't want it to look like this
http://www.flickr.com/photos/[email protected]/sets/72157594221854345/
i see you have modified the flash as i have posted few months ago haven't you? or yours is like this from the factory?
should have done a glossy black or glossy white instead. that would be sweeet!!! but good work thou even if its appear still rough.. admire your braveness..
On IMG_14884 it shows a very nice app where it shows the processor speed and I belive also shows temperature? well I want it :-D I got to have it :-D now... also my paint is coming off but I think I will take it appart and take it to a car coach work to get it respray it :-D... but I think i'll do it silver colour original because of the buttons...
Also it would look better if you would find and eletrick blue wall paper and I would also suggest you to get the windows live messanger installed there too :-D have you tried it? I can't live without it now ;-)
P.S.
Hum! Holand is my favorite country best people best culture
awesome im not the only one
i just recently painted my 8125. i did it because it was scratched and getting worse no matter how well i took care of it. for some reason the paint chips off constantly. my process was the following
i did not take my phone apart.
1.taped off the screen
2. taped off everything from the bottom of the top lid down.
3. sanded down the phone to a primer look on the top and a bronze look on the side. (i have come to realize if you dont sand you phone like i did not do the first time you will have yourself a flaking monster)
4. SAND THE PHONE IT WILL LOOK HORRIBLE BUT IT WONT FLAKE
5.painted using Krylon Fusion White Satin.
6.Dry for 24hrs
7.Clear coat
8. Dry for another 24 HRs
9 repeat the steps for the back lid and camera lid.
notes
i had to sand down the back lid which has that rubber thing that has been falling off my phone and it finally got lost.
using a exacto knife i could have left the buttons but i was too lazy to do it.if you decide not to take the phone apart like i did then dont go paint happy because you will see the thickness build up. remember one coat of paint and one or 2 light coats of clear seal will make it look authentic.
if you decide to paint your phone black, like i did the first time, for what ever reason its harder to see the screen in light places. but it looked way brighter in the night.
tips what would be cool is if i had plastic model car decals of some cool designs to apply after the white paint and then seal with the clear coat. i couldnt because there isnt a hobby store in town.
i wouldnt had done it had i not seen the casino royale movie where that chick has that white phone.
i will post pics as soon as my back lids are done drying
PATIENCE YOU NEED PATIENCE!!!!!!!
GOOD LUCK!!
digitaly said:
On IMG_14884 it shows a very nice app where it shows the processor speed and I belive also shows temperature? well I want it :-D I got to have it :-D
Click to expand...
Click to collapse
Go and grab it here: http://www.chi-tai.info/cs_BatteryStatus_XDA_Neo_WM5_iM_cs.htm
Wohaa Crazy!
Juicey said:
Go and grab it here: http://www.chi-tai.info/cs_BatteryStatus_XDA_Neo_WM5_iM_cs.htm[/QUOTEl]
what can I say? brilliant!!! fantastic!!! thanks...
Click to expand...
Click to collapse
I've been meaning to paint my k-jam for a while now but have never got around to it. I'm still unsure on exactly what type of paint to use. I don't want to use just normal spray paint, i want something that will make it look like i bought the device like that.
I was also thinking of trying out Alsa Corp's thermal color changing paint. http://alsacorp.com/products/eclipse/showcase/6-l.jpg http://alsacorp.com/products/eclipse/video/eclipse_sink.wmv
I think i'm gonna have to make a trip to a hobby shop and see if they can help me out to find the right type of paint.

X1 Battery Cover - Material?

Afternoon guys n girls,
Just a quick question, can someone confirm the X1 battery cover is aluminium and not titanium etc.
Mine is scratched to hell and I wouldn't mind getting it re-anodised purple or blue providing it is alu.
Thanks
try using the wonders of physics!
go get a magnet and test it
Have tired that already, it's not magnetic so that rules out steel... just wasn't sure if titanium is magnetic or not.
google power ("titanium magnetic")
Doesn't really help though, some people said it is magnetic whilst others said it isn't... there is not a clearly defined answer.
I'd rather not try re-anodise it and get it burnt to **** and THEN find out it isn't alu.
it's definitively not titanium..... the fu.... chassis is build in cheapest plastic but the accu cover is build with titanium......häh
im pretty sure its alu. the whole phone is made of it, why spend more money ona titanium battery cover?
I don't know, I just recall Nokia using Titanium on some of the phones like the...8800?
Ah well, anodising here we come.
good luck
whatever this actualy does hehe but screens are appriciated
Well it's taken a battering so re-anodising it will put all the colour back, get rid of the horrible grey patches.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Will probably do it shiny purple:
im somehow glad now that i got the Silver version. i can barely see my scratches
achmed20 said:
im somehow glad now that i got the Silver version. i can barely see my scratches
Click to expand...
Click to collapse
I was thinking the same. Silver ftw. But on the pics it seems pretty bad handled even for a black X1.
just the battery cover. the rest seems fine.
but i must admit ... the batter cover get scratchy so freckin easy. i just wear it in my pocket or sometimes laying it on my desk. yet i got scratches on it.
i think my silver x1a is made of stainless. i had a hard time drilling thru doing the battery cover reset mod. i was using small new drill bit to drill a pilot hole and it wasnt easy. took me about 5 to 10 minutes to drill thru.
it's aluminum... otherwise, they would have bragged about using titanium in their phones..
besides, the nokia 8800 carbon is made of carbon fiber and titanium and retails for around 1000-1200 bucks.
c_legaspi said:
i think my silver x1a is made of stainless. i had a hard time drilling thru doing the battery cover reset mod. i was using small new drill bit to drill a pilot hole and it wasnt easy. took me about 5 to 10 minutes to drill thru.
Click to expand...
Click to collapse
I don't know what drills you use, but with a common HSS drill it should not take longer than 20 seconds to drill through and make a fine champfer -carbide should do the trick in half of the time.
Paitor said:
I was thinking the same. Silver ftw. But on the pics it seems pretty bad handled even for a black X1.
Click to expand...
Click to collapse
The rest of the phone is 100% fine, it's just that I always put it down on my desk / table and tend to slide it rather than picking it up and moving it so the back has taken a hammering.
Just spoken to my mate who does anodising and he said he'll beadblast it first then re-anodise it for me... mmmmm blue or purple, that is the question now.
[email protected] said:
The rest of the phone is 100% fine, it's just that I always put it down on my desk / table and tend to slide it rather than picking it up and moving it so the back has taken a hammering.
Just spoken to my mate who does anodising and he said he'll beadblast it first then re-anodise it for me... mmmmm blue or purple, that is the question now.
Click to expand...
Click to collapse
I'd prefer purple with a black phone.
Blue would be better for the silver one.
yeah thats what i thought untill i started drilling.
alluminun for sure its not. i thought so too and was thinking i would make quick work out of drilling but it didnt work out that way.
skycamefalling said:
I don't know what drills you use, but with a common HSS drill it should not take longer than 20 seconds to drill through and make a fine champfer -carbide should do the trick in half of the time.
Click to expand...
Click to collapse
[email protected] said:
Have tired that already, it's not magnetic so that rules out any form of steel... just wasn't sure if titanium is magnetic or not.
Click to expand...
Click to collapse
I must confess to total amazement here - normally, I'm extremely good-mannered ... but:
IRON (Fe) is magnetic, together with it's 3+ oxides (Fe3O4 etc)
TITANIUM is a completely different element
I just can't believe it ...

SEX1 Back/battery cover solution

Hi everybody,
I´m still a student here in this uge high school of tecnology, i learned a lot and know for the firts time i think that i can contribute with something form my one, straight form Portugal.
Well as all the SEX1 (black) user´s I encounterd the back/battery cover problem! It´s scratch very easy... on the second day of use only by putting it in my jeans pocket it was already showing bit´s of aluminium... I had a lot os phones till now and with none something like that happend but also... and i never had one with a aluminium back (chique) ... and front cover so the 600€ maybe not all lost in the process...
Well i found on google a mate that polished his one almost to bronze... but i tougt to myself that it had exist a solution more simpler and i found one... simple and great...
Simply wipe the paint of with a normal soft steel woll swab, those that mom´s use to clean the grease from the pan´s, it doesn´t ruin the aluminium, it doesn´t scratch it, and the aluminium stays with that awsome shape... Really nice! Think almost better that the original black. Heard people saying that the will buy new ones form ebay... the problem will remain the same... they will scratch sone or later...
Cheers|
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks nice man! I have the silver one, and man.. it looks awul..
I'm not understanding..
So you used the pads to basically sand down the aluminum, and then paint it over or something?
Sfkn2 said:
I'm not understanding..
So you used the pads to basically sand down the aluminum, and then paint it over or something?
Click to expand...
Click to collapse
The pads take out the paint, without scratching the surface, and leave de foil naked, witout the black ou grey paint... for me it´s better than as in original
So basically, the entire cover is actually made with black aluminum, and that it's not silver with black painted over?
Edit: What I mean is, how is it that you're taking off the paint, but it's still black in those pictures?
Sorry, I'm just a bit confused.
Sfkn2 said:
So basically, the entire cover is actually made with black aluminum, and that it's not silver with black painted over?
Click to expand...
Click to collapse
Lol it´s silver as seen in the pic´s...
But it´s a dark silver...
I think the color on my monitor is off, but I see it clearly as a dark dark dark black
Anyway, it looks real good after what you did with it.
Sfkn2 said:
I think the color on my monitor is off, but I see it clearly as a dark dark dark black
Anyway, it looks real good after what you did with it.
Click to expand...
Click to collapse
Well in this pic you can see it better lol
Nice one man!! i did the same and ppl were surprised by the results
I was really scared to this, but it really worked! Thanks man!
its not
its not aluminium its titanium. i think this is your answer
looks great! I think I will try it myself. I never thougt it was that easy!! Thanks for the idea
Anyone else tested this? Thought I might try this with my silver cover, but don't know if the result will be as good as this?
Hi, good to know that people from where I live do think of some good things, after all... hehe.
I have a balck one too, bought it on ebay about 9 months ago, and it already came with some scratches on the battery cover.
I thought of buying a new one, but after seeing your post I'll try that instead.
Thanks again.
"Obrigado"
Johev said:
Hi, good to know that people from where I live do think of some good things, after all... hehe.
I have a balck one too, bought it on ebay about 9 months ago, and it already came with some scratches on the battery cover.
I thought of buying a new one, but after seeing your post I'll try that instead.
Thanks again.
"Obrigado"
Click to expand...
Click to collapse
Please come back with info on how it turned out
bobbanswe said:
Please come back with info on how it turned out
Click to expand...
Click to collapse
If someone has done it now, please report back. Still wishing to hear from someone else before doing it
steel wool works too
I did not have brillo, so used a soft steelwool obtainable from any builders merchant/paint shop/hardware store and it works a charm.
Nice uniform dark metal finish, only a couple of shades lighter than the original (unscratched) black - imagine the surrounding metal of the front cover being a shade or two lighter - same finish, sheen and proffessional look!
Shows finger prints, but not scratches!
thanks very much for this!!
I just painted mine candy apple red (inspired from the Satio). The black-red combo looks really, really great.
harveydent said:
I just painted mine candy apple red (inspired from the Satio). The black-red combo looks really, really great.
Click to expand...
Click to collapse
Sounds awesome dude. Wanna upload a pic?
bobbanswe said:
Sounds awesome dude. Wanna upload a pic?
Click to expand...
Click to collapse
As soon as I can get a hold of another camera (the X1 is my only cam, sad, I know) I'll post pics.

Hero paintjob project

****UPDATE*******
Been thinking about making them for people.
front £12.55
back £4.59
Paint £5
labour £5
designs £10
and if you wanted a design I will be using a qualified fine artist. She is painting two cases now so will post them when she is done.
The front case doesn't come with a digitizer so the area around that will look fine.
*****/update*****
I have owned the Hero since it came out on orange in the UK, but I hate the grey colour so I'm making it nicer.
I have 4 backs to the phone so all will be different designs. Also I will be using the black grill cover for call speaker, black volume/menu buttons from the T-mobile G2.
As I think black will suit the blue better.
All paints are car paints from Halfords.
I started on day one with sanding down the phone then applying a primer(base layer)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Day two
I applied the blue colour
Day three
Went really well sanded down and put the primer on the other backs.
Applied the lacquer, so will be able to rebuild phone tommorow.
The yellow back is halford glow in the dark paint. I do not recommend playing with this(yes it glows like mad) it is really thin. It took 6 layers just to get what you see in the photo.
Day four rebuilding the phone.
Phone rebuild only had one little hic-up. when I put the black grill on the in call speaker didn't put it right so was very quite. Corrected now.
phone is working fine no dust under the screen. looks well smooth.
things I would change.
I would take the digitizer out fully not just use low tack tape.
put all casing on match sticks to get a smoother look on the corners.
apart from that I'm well impressed with my first try at painting. ( didn't even do art in school)
Lots of photos including the glow in the dark case.
Any questions post here or tweet me T- iammodo
Nice work Could you show us a picture of how the finished paint job looks?
wow looks cool
man, crazy idea but if it works it'd be amazing
updated the photos for day three
wont your screen and lcd be filled with loads of smudges and dust when you fix it up all back?cos thats what happened when i did a glass and digitiser swap on a iphone 3g..seems like it works the same way on the hero..dirt and grime is a turn off on the iphone 3g once screen is replaced,so thats why now im on a hero.anyways..nice job!!
screamsoflust said:
wont your screen and lcd be filled with loads of smudges and dust when you fix it up all back?cos thats what happened when i did a glass and digitiser swap on a iphone 3g..seems like it works the same way on the hero..dirt and grime is a turn off on the iphone 3g once screen is replaced,so thats why now im on a hero.anyways..nice job!!
Click to expand...
Click to collapse
Low tack masking tape has been keep on the inside of the screen, and I will be using a cleaning cloth from htc for the screen.
So should be fine
iammodo said:
Low tack masking tape has been keep on the inside of the screen, and I will be using a cleaning cloth from htc for the screen.
So should be fine
Click to expand...
Click to collapse
alrighty then...dust has always been a major problem for me whenever ive done sonething like that..anyways,gd job!wonder if you do a shot of the back cover glowing in the dark
updated day 4
Sorry to break it to you bro, but it looks fugly.
olafos said:
Sorry to break it to you bro, but it looks fugly.
Click to expand...
Click to collapse
Very constructive comment thank you.
love it!!! wish i had the guts to break mine apart a paint it funky green like in your photo's
Haha, do you think you only get constructive comments?
It's not only the colors that are ugly... I mean, that's taste really. You have none, but that's not the point here. It looks really bad... I mean, the part between screen and case. The Hero is such a beautiful device and this just looks cheap after the paint job.
olafos said:
Haha, do you think you only get constructive comments?
It's not only the colors that are ugly... I mean, that's taste really. You have none, but that's not the point here. It looks really bad... I mean, the part between screen and case. The Hero is such a beautiful device and this just looks cheap after the paint job.
Click to expand...
Click to collapse
See the part about the bit around the screen that's constructive well done.
This is why I said next time I will be taking the digitizer out fully.
I will be staining this area black on this case to make it look nicer.
Why would you say I have no taste that's just not very nice and the sort of thing that is bringing down internet forums. I love the colour blue as you can see it even matches my nail varnish.
olafos said:
Haha, do you think you only get constructive comments?
It's not only the colors that are ugly... I mean, that's taste really. You have none, but that's not the point here. It looks really bad... I mean, the part between screen and case. The Hero is such a beautiful device and this just looks cheap after the paint job.
Click to expand...
Click to collapse
Comments like this are a violation of site policy. If you don't like what he did, keep it to yourself. Be respectful of other members, very simple.
not much of a fan of the colour choice,i thought the white of the primer was canny , but good work on the painting! did you wet and dry sand it in between?
Love the colour! Arden blue is the best! The back looks really well done but the front not so much, but probably - as you said - due to working with the digitizer still in; pop it in the oven for 7 minutes @ 60C and it'll come out no problem.
And I was wondering, where did you get the black volume rocker from? I recently swapped my white case for a black unbranded one, but it didnt include the volume rocker and having a really hard time finding one.
Well done for first attempt tho, if you can get the front looking as good as the back then your onto a winner!
I get all my parts from work, not a shop or website sorry.
I will be buying a new front case from work to get a smoother look.
Also maybe this week i will be repainting this case to look better.
sorry i agree with him.Paint job isnt particularly great, you can see alot of wonky bits.Way to ruin a $500 phone imho Great job
Constructive criticism and ideas:
- I don't like the color choices. Most Hero owners would prefer more conservative colors like black, silver, white, gunmetal (dark grey). Try it in these.
- Paint job is very sloppy. I didn't read the entire post but if you're putting tape on it or whatever you're doing while you paint it, do a better job so it looks cleaner/neater.
the glow in the dark back cover is cool..looks rather ghastly..like slimy from ghostbusters...hahaha...that i would put on my hero when bored..but i wouldnt paint the whole phone though..anyways,good job..

Scraped some paint on the Evo ;)

I don't recommend doing this if you value your manufacturers warranty!
I also do not take credit for the idea, as I saw it on a post on another android forum (linked from the white evo with black battery cover thread in the evo accessory forum).
Either way, just wanted to post some decent quality pics of how well this can turn out. I actually took the pics with my dads evo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What I did was take the battery cover off, and mask over the holes of the phone (don't want any scraps getting into anything, this is a messy project).
Then take a sharp razor blade, and start scraping away at the paint. Don't try to cut into it, rather pull the blade along the edge of the phone.
Start at the bottom so you can get the hang of it (and its less noticeable if you mess up).
I took my time on this, took about 30-45 minutes but I got all the edges and corners perfect.
Be careful around the headphone jack, this was the hardest part for me.
Wow! Looks great
I must say that looks pretty nice.
So the plastic is naturally red?
Sent from my PC36100 using XDA App
gqstatus0685 said:
So the plastic is naturally red?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
yep; dropped my phone last week, exposed some red plastic on the back corner. may go ahead and do this. don't see why this would void the warranty though . . .
So this with a red back would make a limited edition red evo
Sent From My HTC Evo Using Tapatalk Pro!
I'm drooling... I want my phone to look like that.... but...
I would totally screw this up...
jhayes said:
I'm drooling... I want my phone to look like that.... but...
I would totally screw this up...
Click to expand...
Click to collapse
true that.
awesome work man!
Yep all the plastics on the phone are red. Just carefully drag a razor blade along the edges to get the paint off. Like I said, don't try to cut into it, it'll look like crap.
Wow, yes that looks awesome. Makes you wonder why they dont make a completely red evo if the plastic is already red.
I'll try this tonight.
sitlet said:
Wow, yes that looks awesome. Makes you wonder why they dont make a completely red evo if the plastic is already red.
Click to expand...
Click to collapse
It was originally supposed to be, but verizon had claims on the red theme with their incredible, then changed the incredible at the last minute and the evo was stuck with the black facelift. Or something along those lines, don't know the exact story but I had asked about it at my sprint training and thats what I was told
that looks great, very a-team looking!
sitlet said:
Wow, yes that looks awesome. Makes you wonder why they dont make a completely red evo if the plastic is already red.
Click to expand...
Click to collapse
Propanly because HTC values their office customers. A red one would be too playful. A limited edition tho....
Love wat u did yetiguy!
Wow
jus finish my....LOOKS GREAT
Wow looks great!! Unfortunately I use a black silicone case. I may have to order a crystal silicone case just so I can see this mod.
Looks great!
I think I'm going to take mine apart rub away paint using a solvent that way there's no chance of cut in or paint sliver getting into device.
The take apart getting back off is pretty easy
http://www.youtube.com/watch?v=14d41PM8Bzk
Tamper proof sticker re-placement is no big deal did it all the time on my blackberry 9630,s & 9650
very nice!
please post an image of how this turns out if you end up doing it!
sling said:
Looks great!
I think I'm going to take mine apart rub away paint using a solvent that way there's no chance of cut in or paint sliver getting into device.
The take apart getting back off is pretty easy
http://www.youtube.com/watch?v=14d41PM8Bzk
Tamper proof sticker re-placement is no big deal did it all the time on my blackberry 9630,s & 9650
Click to expand...
Click to collapse
looks amazing man but we all know how sprint is yellow right what if they matched it with the yellow and black

Categories

Resources