Hey Guys
i bought this BT Keyboard : http://forum.xda-developers.com/showpost.php?p=6520628&postcount=2
It works on Windows Mobile without any "driver", but on every android version atm it don't works (i can just pair it)
There is an App for the Android (on the driver disk of the keyboard), but this don't work -.- even on the Produkt Page is written: "Google Android(1.6+)" bad joke -.-
Already tried "elbrain.bluekeyboard.ime (free version)" but after it tries with "Connecting..." some seconds later it displays "Disconnected."
Does anyone has the same BT Keyboard, and got it work?
Related
I've bought your software MobileNavigon|5 ( This is not cracked version !!!!) . I've installed it on my Pocket PC MDA Compact ( ROM 1.11). I'm using it with BT Rikaline 6031-x7.
Here is a list with all issues / problems I've found in your software:
1. To designate and show the route from i.e. Katowice to Budapest, MN5 needs 117 seconds !!!!!
2. It is impossible to navigate using MN5 because it shows you information from the past. For example, I've stopped my car on crossroad and MN5 software showed me, that I drive my car with 37 km/h !!!!!. This is obviously readout from the past - like 10 seconds old or something.
3. When GPS is started, than MN5 works extremaly slowly and every operation - like pressing button or refreshing the screen - takes about 30 seconds !!!!!!
4. When Pocket PC switches off, you software looses BT/GPS connection. It is required to re-start software again to get it communicate with GPS back.
5. When MN5 starts my bt gps device ( RIKALINE 6031-X7 connected via BT), my Pocket PC cannot perform any other operation. I cannot make or pick up the phone call, cannot start pocket outlook, IE or any other software.
Any idea ?
Regards,
Darek
Is there anybody who can help me ?
I tried also with Socket BT GPS, result is the same.
I found Navigon5 forum, but I don't speak german at all
http://www.pocketnavigation.de/board/bid144-sid.htm
Desperate
Go to www.navigon.com, check international
go to service desk
pick the telephone number of your choice and you will get english speaking people who can help you out
A wired gps instead of bluetooth tends to fix these kind of problems, bluetooth is a great idea but I now always use wired gps for navigation because of the inherent problems with bluetooth.
but this BT GPS works perfectly with TT,Destinator and other navigation software except this f... navigon5.
I tested it with all GPS software ( VisualGPS, GPSTweak, WinFast Navigator) and everything is OK.
I found file spgps.ini file with settings
[Default GPS]
GPS=GGA_VTG
GPS1=GGA_VTG
GPS2=RMC_GGA
[GGA_VTG]
Type=NMEA
Name=GPS with GGA and VTG messages
Device=SerialPort
Input1=GPGGA,utctime,latitude,ns,longitude,ew,quality,satellites,hdop,altitude,,,,,
Input2=GPVTG,course,,,,,,speed,
[RMC_GGA]
Type=NMEA
Name=GPS with RMC and GGA messages
Device=SerialPort
Input1=GPRMC,utctime,,latitude,ns,longitude,ew,speed,course,,,,,
Input2=GPGGA,,,,,,quality,satellites,hdop,altitude,,,,,
speedMultiplier=1.851998
speedOffset=0.0
Preferable=1
[Operation]
OperationTimeOut=1
Autolog=0
Suspended=0
Speed=2.000000
LogDir=
AttemptsNum=3
[Matcher]
IgnoreOneWay=1
[Serial Port]
PortNum=5
Timeout=5
BaudRate=4800
[Parser]
AutoDetectTimeout=30
AutoDetectEnabled=1
AutoDetectInfinite=1
Is there anybody who knows what does it mean? Maybe by changing those lines it possible to start this **** working...
I sent them a lot of emails and still no answer... Their support works like their software
Darek
Hi,
I got a Palm Bluetooth wireless keyboard for Christmas but I can't get it working with my T-Mobile Ameo.
I have installed the keyboard drivers (http://www.palm.com/us/support/accessories/btwirelesskeyboard.html) and get a "wireless keyboard" icon in Programs. But when I click it and tick "Enable keyboard" the Ameo just hangs. The only thing I can do is take the battery out to reset it.
Anyone else found this? or fixed this?
The keyboard won't work via the normal Bluetooth pairing interface either.
Thanks,
Tom
Still no luck
I still haven't managed to get this Bluetooth keyboard working. Just thought I'd post some more details in case anyone was interested:
* Keyboard: Palm Wireless Keyboard (3245WW): http://www.amazon.co.uk/Palm-Wirele...4?ie=UTF8&s=electronics&qid=1199552934&sr=1-4
* Palm Keyboard software installed on Ameo: v1.1.0.2.
* Ameo OS: Windows Mobile 5.0.
Anyone know of a bluetooth keyboard that does work with the Ameo?
Replacement
I bought a replacement keyboard - It is the "Freedom Universal Keyboard" which I can report works ok with the Ameo. See http://www.tomfotherby.com/blog/ind...board-dec2007-christmas-present-from-grandpa/ for comments and installation instructions.
I ebayed the keyboard that didn't work (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270203021878).
I thought I'd post an update about the "Freedom Universal Keyboard" keyboard now I've been using it for a while with my Ameo. I no longer recommend it! There are 3 problems with it:
1) I have to pair it every time I turn my Ameo on and pairing is flaky (average of 10 minutes faffing around just to get a working connection). Pairing rarely works first time. You have to turn off other bluetooth devices. Sometimes I have to restart my Ameo multiple times. You get the picture.
2) You can't hold down shift to select text (vital for copy&paste).
3) The Home and End keys don't work (vital if you ever write long sentences).
Anyone found a good bluetooth keyboard yet?
i use the thinkoutside/igo bluetooth keyboard and mouse, i highly recommend them!!
the links below are to the direct website, but you can do a web search and find them much cheaper elsewhere.
the mouse
the keyboard
hope this works better for you, i have no complaints, enjoy!!
Hi!
My DVP bluetooth is not working ! - .. if enter the settings - Bluetooth - status click' - turn ON ' - my DVP find some bluetooth devices (from my closely place)
, when i tap any b. device --> ( tap to pair ) - .. other bluetooths device try to connect my dvp with code numbers / or i add my own pin numbers - whatever ...
enter code - try connect - and my dvp write " couldn't connect or not supported !! - and write again tap to pair " )
please help me !!!! :/ - i tried lot of device ..: ( mobile/cell phone , laptop , notebook , pc , bluetooth headset - all device couldnt connect my dvp ! )
my dvp OS version: 7.10.7720.68
i have the same problem, bluetooth does not pair with anything,
os version 7.0.7392
anyone knows the reason?:/
Don't know why but Microsoft made it to only pair with with windows phones only.
Sent from my GT-I5800 using XDA App
I can connect to my car, PC, and headset with no problem. I synced before mango if that makes a difference.
Sent from my Venue Pro using XDA Windows Phone 7 App
...... :/
can't even pair with a htc dash using windows mobile 6.1
Mine neither.. Is there any solution yet?
Not so much Nexus-7 specifically related, as the problem occurs on both my Droid 4 and my Nexus 7, but I hope someone can help me solve this problem:
Starting from a 'clean' situation with the keyboard unpaired to the tablet, I set the keyboard in pairing mode by pressing the 'connect' button until the bluetooth LED starts flashing rapidly.
I then go to the bluetooth settings of one of the above devices, I select the bluetooth keyboard from the 'available devices' list.
My Android device then prompts me to enter a certain passcode on the keyboard, followed by the ENTER key.
I do this and the keyboard successfully registers in the Android device as a paired device.
At this point I am able to use the keyboard without any problems.
However when I turn off the keyboard, or let it go to sleep, and then turn it back on later, the keyboard connects successfully (I can see 'Connected' in the bluetooth settings screen), but it's not possible anymore to enter any text or use any of the keys.
I try reconnecting several times each time turning the keyboard off in between, but alas, nothing helps.
If I 'unpair' the device from my Android device and re-pair it, it works fine again until the next time I turn it off.
Needless to say it's not really a workable solution having to re-pair the keyboard each time I want to use it.
To rule out the Android devices being the culprit, I have tested the same process with another bluetooth keyboard (Logitech DiNovo Edge) and it doesn't have the problem.
However, using the Rapoo keyboard on a colleagues iphone, everything works perfectly.
I've come across other people having this problem, and some say it used to work fine in Android 2.3, but at this moment I haven't got a device with 2.3 on it to test with.
I tested with a colleagues 2.2 Android phone but that one wouldn't even pair.
I will try tonight with my girlfriends 2.3 Moto Defy+ and report back.
Didn't get around to trying this on 2.3 yesterday.
I also sent an email to Rapoo support asking them if they knew any fix for this, and this was what I got in the mailbag this morning:
Dear Customer,
Hello!
Please note that E6300 is specially designed for Ipad.It works with other computers which use Windows or Mac operation system, the shortcut keys for Ipad may be useless.Besides, the only cell phone it supports is Iphone 4 and the the shortcut keys for Ipad may also useless.
Thanks for your support to our products.
Best regards,
Click to expand...
Click to collapse
What a bunch of horse dung...
i have the same problem with my nexus 7 and the rapoo 6300.
i allready tried different kernels and roms.
at first i also had to repair the keyboard once it disconnects. (happens quite fast, sometimes after not typing for some seconds, but sometimes it keeps connected and usable for about 10 minutes)
but i figured out that you don´t have to repair it when it disconnects. when it says "connected" but it is not possible to write something, just wait some seconds, and it will work. (at least at my device, stock kernel @ smooth rom)
still very annoying, but i think it shows that there is a solution for this problem.
After some research i found out that some people had this problem since android 4.0. (worked fine at gingerbread)
but i tested the keyboard at a friends nexus s with jellybean miui rom and it worked fine.
gnomedroid said:
After some research i found out that some people had this problem since android 4.0. (worked fine at gingerbread)
but i tested the keyboard at a friends nexus s with jellybean miui rom and it worked fine.
Click to expand...
Click to collapse
Another observation, when connected to an Ubuntu 10.04LTS (kernel 2.6.32-44-generic) desktop, the same behavior happens.
To repeat, you can pair the keyboard, and after the first sleep, even when it reconnects (pressing the Connect button helps), it does not generate input events for the desktop either.
Same problem here. Tested with a GNEX and a N10. Even with the latest 4.2.2 it shows the same problem … one sleep and you have to pair again. POS!
Any comments on Nexus 7 with CM or AOSP? I heard these mods use a different keyboard driver...
: I tested with a colleagues 2.2 Android phone but that one wouldn't even pair.
I will try tonight with my girlfriends 2.3 Moto Defy+ and report back.[/QUOTE]
I tested Rapoo e6300 against a HTC desire HD with 2.3.1. No chance: it will not pair. Rapoo can not be used with my N7, it just worked ten minutes after it is paired, and then it starts disconnecting. And no input gets through. Waiting a few seconds have no effect, Bluetooth is basically not working.
Got major connectivity issues with Rapoo E6300 here too on Nexus 7 with SmoothROM 4.4 (Cm based on 4.2.1)
Swapped it for a Rapoo E6100: works great! I did get some issue with reconnecting to Nexus 7 after I tried to pair the keyboard to my HTC
One X (which didnt work at all).
Had to reset the whole connection with nexus, but as long as i dont switch off Bluetooth on the nexus it works fine. Switching off or sleepjng the keybord is fine.
Sent from my Nexus 7 using Tapatalk HD
Hi !
I remember I could connect my phone with computer using Bluetooth.
Usually I could choose between 2 profiles :
1) "Music and Audio"
2) "Hands Free"
Now I switched to Windows 8.
When I pair my phone with computer I find these 2 profiles :
1) "Music and Audio"
2) "Remote keyboard and mouse"
Where is the "hands free" profile ? "Remote keyboard and mouse" profile for a phone makes no sense (and it gives an error if I try to connect using it). Is this an error of the broadcom driver ?
I forgot to mention I have an HP BT500 Bluetooth dongle.
I am currently using the last Broadcom driver, I installed it by the new automatic updater (www.broadcom.com).
Otherwise you could suggest me some dongle with a working Hands Free profile in Windows 8.
Hi Dragonide,
same situation by my side also with Win 8. Tried multiple drivers which allowed me to "unlock" some bluetooth features like "file transfer" and "modem" but no way to get the hands free option back. I tried with various phones as well.
Did you manage to find some answers ?
Thanks
I'm using windows 8. And I have the same problem. I still cannot get "hand free" profile from my laptop.