Has anyone actually got this to work? I'd love to try it out with the blackstone.
The phone isn't recognized when connected to the PC. Currently I'm running Froyo and I tried connecting it to 64-bit windows 7 and 32 bit vista, also using various cables just to be sure.
It is charging though. Does anyone have any idea why it isn't recognized?
It alwasy work.u just need to use driver from xdandroid git
Just figured out that the USB connection only works when you start android with the USB cable connected. Connecting it after booting doesn't work.
It also helps to have the coorect drivers form Android SDK kit and droif explorer. With droid explorer you are abel to copy files to and from your device
Related
My phone doesn't mount when plugged in to a PC
USB debugging is switched on but does not activate when plugged in.
The phone shows its charging but that is it.
I am able to access the SD card normally on the phone but there is no indication of the phone being connected when I plug it into my PC.
I have tried;
plugging it into different PCs
different cables
the unbricking process, several times (even though it doesn't really apply, my card is visible in Android)
flashing to different roms with a wipe in between
Any ideas?
I can't figure it out.
E.E.
***bump***
me too same problem after updating to froyo ... but i'm different than you the it connect after a while .. but now for example when connecting the phone to my car it doesn't read it because it take too long to connect .. any help ?
Have you got a working set for drivers?
This was my main problem, I used to just have to play around with the USB and eventually it would mount after about two or three reboots.
I installed HTC Sync & updated drivers and so far it's been working the way it should be, even if you don't use HTC sync just download it and grab the drivers & then replace files with the the
Code:
HTC Hero driver for 32-bit Windows 7: HTC_Driver_32.zip
HTC Hero driver for 64-bit Windows 7: HTC_Driver_64.zip
That sorted my problem but not sure if it works for everyone.
(I'm using Windows 7 [64bit] Ultimate)
parker09 said:
Have you got a working set for drivers?
This was my main problem, I used to just have to play around with the USB and eventually it would mount after about two or three reboots.
I installed HTC Sync & updated drivers and so far it's been working the way it should be, even if you don't use HTC sync just download it and grab the drivers & then replace files with the the
Code:
HTC Hero driver for 32-bit Windows 7: HTC_Driver_32.zip
HTC Hero driver for 64-bit Windows 7: HTC_Driver_64.zip
That sorted my problem but not sure if it works for everyone.
(I'm using Windows 7 [64bit] Ultimate)
Click to expand...
Click to collapse
I think you are right. it happened to me and it was because drivers.... once windows finalized to install the drivers is sure you will get the option to mount as drive...
Sent from my HTC Legend
No its not the drivers. My PC still connects successfully with the phone when in recovery mode. That's how I was able to complete the USB unbrick process.
E.E.
i have never had any problems with windows vista at all now that i have a new pc it just wont work i installed the 64x drivers on my 64x pc and all i get is installing device driver software. samsung android usb composite device ready to use. cdc abstract control model (acm) installing driver software. s3c6410 android adb installing software. usb mass storage device ready to use and android ums disk usb device ready to use. i waited for ever and its just stuck there i changed from one usb port to another some ports recognize it some did not. if it does it goes threw the same process of installing device driver software and some times give me a fail on cdc abstract controls model (acm) i also downloaded the 32 bit and no budge there. i restarted my pc and all also. i been at this for days just need some help searched the forum and the search results did not help thanks.
thanks guys 19 views and no responce
I'm not exactly sure what you are asking. I had problems getting my epic to show on my pc as well. For me, it wasn't the dr4ivers, but the fact I had it plugged into a usb hub. Try plugging it in a main usb port on the back of your case... these are usually the ones for your keyboard/mouse.
Sent from my SPH-D700 using XDA App
iv had the same issue my friend.... for all my pc epic modding I just use my girls xp netbook
dfitzpatrick said:
I'm not exactly sure what you are asking. I had problems getting my epic to show on my pc as well. For me, it wasn't the dr4ivers, but the fact I had it plugged into a usb hub. Try plugging it in a main usb port on the back of your case... these are usually the ones for your keyboard/mouse.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I haven't been able to get drivers to load at all... I have given up.
I too have a 64bit Win7 machine.
I too had the same drama for days on end..
I too read that installing PDA net will get you up and running
so..
I too am suggesting the following:
get PDA net and when it installs, select "samsung" and enjoy being able to plug your phone into your computer
I hope this helps
When booting windows hold F8 key and choose "Disable driver signature",now boot into windows and intall drivers it should work.
If not intall PdaNet tether on ur epic download drivers to ur phone for ur pc(it promts u) install them and ur good to go,dont forget to disable driver signiture and if u on win64 bit than u gotta disable it each time u boot into windows.
I can't seem to get USB tethering to work on my HD2 loaded with Android 2.3.4.
The hotspots work ok but everytime I plug in my phone via USB and choose tether USB, Windows 7 does not recognize it as a RNDIS device. It only sees it as a ADB device.
I tried to uninstall the drivers for ADB device and Install the RNDIS drivers for Windows 7 x32 but it does not recognize the driver for the device.
Is there a fix for this?
Thanks.
theshadow1234 said:
I can't seem to get USB tethering to work on my HD2 loaded with Android 2.3.4.
The hotspots work ok but everytime I plug in my phone via USB and choose tether USB, Windows 7 does not recognize it as a RNDIS device. It only sees it as a ADB device.
I tried to uninstall the drivers for ADB device and Install the RNDIS drivers for Windows 7 x32 but it does not recognize the driver for the device.
Is there a fix for this?
Thanks.
Click to expand...
Click to collapse
Same here - and am using CM7 nightly build. RNDIS device never gets detected (Win 7)...
RNDIS was removed from the EVO kernel by Markinus last year.
And all the main kernels we use for HD2 are based on Markinus' EVO kernel.
I cannot access my samsung intercept phone with 2.2 via my windows NEW 7 usb. I did so with the same device and cable on a previous pc running XP.
When connected, it beeps but the PC says there usb driver is wrong but I have tried all sorts oof usb drivers with no success.
Both samsung and HP (pc vendor) point their fingers at each other.
Any ideas?
Boruchb said:
I cannot access my samsung intercept phone with 2.2 via my windows NEW 7 usb. I did so with the same device and cable on a previous pc running XP.
When connected, it beeps but the PC says there usb driver is wrong but I have tried all sorts oof usb drivers with no success.
Both samsung and HP (pc vendor) point their fingers at each other.
Any ideas?
Click to expand...
Click to collapse
I used to have an intercept months ago and for a minute i had ur same problem. Try some of these options
1. Download samsung phone usb drivers.
2. Get a new usb cord.
3. Dwnload pdaNet from the market and send the drivers from ur phone to ur computer from pdaNet. ( pdaNet will ask if u need drivers) This is actually the way i got my intercept to be recognized by my win7 computer once i bought a new usb cord.
Hope things work out for ya
I have a Nexus 7 that used to be able to be seen (and trnasfer files) on my Win 7 64-bit Ultimate pc. It is not visible in Explorer now- think it happened after upgrade to 4.2.2
I have tried various ways and means from this site and others but still unsuccessful. My pc kept wanting to install MTP USB drivers everytime I plug the N7 into it even when I have it set as PTP; and the drivers always failed.
I downloaded the Universal naked Drivers and tried to install it as well but problem is that my device only show up as MTP USB (under portable devices) instead of as N7; and under that the drivers is always the failed MTP USB drivers. I cannot browse to install Universal Drivers here cos the pc will not accept it.
Really running out of my wits. Any advises please?
Thanks.
I had initial problems connecting to my pc after installing all the drivers from a toolkit. After searching, I followed a tip and installed pdanet on my phone and pdanet for android on my pc. Now I connect exactly like my phone or other storage with full access to the user storage on the n7 from the pc. Win 7 pro 64bit.