Database Users

MMS and SMS in different folders? ArcSoft MMS

Hi!
Once I installed a version of Arcsoft MMS that had MMS and SMS folder, everytime I received a MMS were moved to MMS folder and SMS to SMS folder.
Now I lost the CAB file and I don't know what version had this feature.
Can you help me?
Regards

TiGuy82 said:
Hi!
Once I installed a version of Arcsoft MMS that had MMS and SMS folder, everytime I received a MMS were moved to MMS folder and SMS to SMS folder.
Now I lost the CAB file and I don't know what version had this feature.
Can you help me?
Regards
Click to expand...
Click to collapse
What device?
Where did you get the download from?
Also, it makes sense that two different mail types are stored in two different folders. Why does this cause an issue?

The problem is the version I installed now don't have this feature.
I receive all in the same folder (SMS/MMS).
And I wanted to received them in each folder.
I have a HTC Wizard and I'm using Alex ArcSoft MMS 5.0.31.7 Build

You need 4.2... in order to have separate folders.
Here

Thank you for the reply!
I'm going to test it

does arcsoft mms work on sprint phones (mogul)? cause i was under the impression it no longer worked for sprint users... just wanna make sure i didn't miss something here, thanks...

I also have a Wizard, and had the SNN diamond ROM but a few hours ago flashed the OS 19588 ROM, which is much much faster. I found a cab file of Arcsoft 4.2.8.1 but when i install it the SMS and MMS folder are still combined. There is no way (like before) where I can go to Tools>Options and then change the MMS settings either (or view the 'About' page for Arcsoft).
What can I do? I would like to keep this ROM as it is so much faster, but need the Arcsoft 4.2 working!

delude said:
I also have a Wizard, and had the SNN diamond ROM but a few hours ago flashed the OS 19588 ROM, which is much much faster. I found a cab file of Arcsoft 4.2.8.1 but when i install it the SMS and MMS folder are still combined. There is no way (like before) where I can go to Tools>Options and then change the MMS settings either (or view the 'About' page for Arcsoft).
What can I do? I would like to keep this ROM as it is so much faster, but need the Arcsoft 4.2 working!
Click to expand...
Click to collapse
Did you try soft reseting? There is also possibility that the rom has Inbox extender cooked in and it's conflicting with older versions of arcsoftmms. In your message menu do you have options "Mark all as read" and "delete all"?

This is the link to the ROM I am using: http://forum.xda-developers.com/showthread.php?t=395173
It is the fastest so far, and I just hope I can sort the Arcsoft business out!
It does not appear with the current SMS/MMS configuration that there is the option to 'Mark all as read' or 'Delete all'.
Is there anything else I can do?
Thanks very much

Can nobody help? This is so important to me.

MMS on Sprint Mogul
orlandojumpoff said:
does arcsoft mms work on sprint phones (mogul)? cause i was under the impression it no longer worked for sprint users... just wanna make sure i didn't miss something here, thanks...
Click to expand...
Click to collapse
A friend of mine was asking me if I could enable MMS on his Sprint Mogul, and I was hoping to just find an Arcsoft sofware that you can just install and done!! Sorry for a nooby question on this, but I don't know anything about Sprint or non-GSM phones, not sure how that works.
Anyone knows how to do that or kindly direct me to the answer, have been searching but I don't find anything about Sprint in USA.
Thx.

A note to the Chefs out there

Hi all.
Having been a member of this forum for a while and used some of the excellent ROMs provided by the chefs here (notobly RickWyatt's V24 full for Excalibur and ROMeOS for Raphael). One problem I have noticed intermittently between the ROMS is the inability to recieve WAP Push messages when using cooked ROMs and I could never figure out why this was untill I started trying my hand at ROM cooking myself.
In the SYS folder (using the Rapheal ROM kitchen) of an extracted ROM there is a folder/package that handles the PPG (Proxy Push Gateways). This is called 'ppgprov' and as a polite request could I ask that people leave this package in their ROMs as in my line of work (Mobile Application Development) we Use WAP push messages to send the clients a link to the application download page and without this package the WAP Push messages are not delivered to the handset.
Cheers all and sorry if it has been covered before (I havent found a solution for this before so I dont think It has)
B4PJS

[ROM] [HP iPAQ 900c] [WWE] 28011 alternative 6.5.x

Kitchen see here
Hebrew support see here
Rom based on Montecristo v5.3, this rom is aimed for non-WWE users who need to install their own sip for input. However the user interface is still in English so anyone can still use.
since I don't own a 91x device, if the test is successful I welcome anyone to take over the kitchen and maintain themselves
notes: currently all vpn/domain enrolling function are not included in the rom, i may add them back if people wish to
all roms have 16mb pagepool
no gmap
-removed google map as requested by EREZYAD
download: mediafire
test 2:
-add back missing wmp skin
-convert more modules into file to increase the chance of switching to new installed sip
mediafire
brsbox
test 1:
changes that are common to both files are:
-replaced incorrectly used 192 dpi with 96 dpi for several packages
-removed the useless bth_watch package
-recmod some dlls to avoid sip switch issue
-remove ipsec,entrepise,Transcriber, packages
-added ADC, bubble breaker, msn weather & money widget ,IRDA
for 91x_WWE_28011_test.rar only:
-removed google map and search
-added gps18030 packages (including simsun.ac3 compressed font)
-replace WWE wince.nls with CHS
brsbox
for 91x_WWE_28011_test_no_simsun.rar only
-added RingsAndAlerts,SampleMusic
-replaced WWE wince.nls with CHT
mediafire

reserved for later 1

reserved for later 2

downloading test 2
tnx 4 everything

tnx keyx 4 your rom it looks great with your 96dpi settings
there are some menus that looks like 128 dpi like gprs popup menu (top bar)
email the "to" option is 2 big or when replying the "edit ..." is big but i think i can set it all by reg
when i do so i will issue a cab file 4 fixing it
now vertual keys on the lower bar looks ok
had some issues selecting fingur keyboard
but the only way it worked was by entering fingKB settings and appyling diffrent settings (i removed RUS support) after thet the fingur kb worked and now i can enable the rus support
will check the rom over the week (push mail ,igo8....)
must say one more time tnx a lot!!! waiting 4 your next rom

there is no "EXIT" option in the "wireless manager"
how can i fix that?
tnx
btw when using wm IE6 over heb internet pages only i get gray page
do u get that in other lang? (like chinese )
if so how do u fix it?

EREZYAD said:
tnx keyx 4 your rom it looks great with your 96dpi settings
there are some menus that looks like 128 dpi like gprs popup menu (top bar)
email the "to" option is 2 big or when replying the "edit ..." is big but i think i can set it all by reg
when i do so i will issue a cab file 4 fixing it
now vertual keys on the lower bar looks ok
had some issues selecting fingur keyboard
but the only way it worked was by entering fingKB settings and appyling diffrent settings (i removed RUS support) after thet the fingur kb worked and now i can enable the rus support
will check the rom over the week (push mail ,igo8....)
must say one more time tnx a lot!!! waiting 4 your next rom
Click to expand...
Click to collapse
you need to post screenshot since i don't have 91x..
but then text size is probably personal preference/
there is no 128dpi in the rom, so if it looks big it is microsoft design for the new build (compare to 218xx) to make it more finger friendly
EREZYAD said:
there is no "EXIT" option in the "wireless manager"
how can i fix that?
tnx
btw when using wm IE6 over heb internet pages only i get gray page
do u get that in other lang? (like chinese )
if so how do u fix it?
Click to expand...
Click to collapse
the X should either close it or hide in background depend on whether showcase is working. (Montecristo's rom does not have wktask i believe so you won't able to notice whether an app is closed or hided unless you open task manager)
for gray page, you need to show me screenshot or give me a link let me try on 61x. I have no problem with chinese for my 61x after adding font and registry but then the setup is a bit difference since the 91x rom is based on Montecristo's.

excellent alternative rom
thanks keyx for re-build the montecristo rom... very excited for sip keyboard fixed.
no problems so far with test2 rom, great job
could you add software from your rom into this rom? maybe we will have much choice of programs from you or from monte..

THX keyx......i can use chinese sip now !!!!!!!!!!!!!!!!!!

hi keyx
im still trying 2 work out some things
i have add fix in my heb thread
as 4 the IE when i add only fonts it works but when using RTL support i have issues (the id of heb is 1037 and 4 eng it is 1033 when switching settings i have some issues ) working on it
as 4 font size the popup menus are big but good 4 the use of a finger so it will stay as is
on my device
it can be fixed from reg ,but i will try 2 get into it also ...4 other users
4 now tnx a lot your rom is very good and fast

it is possible that you may need _CS(ComplesScript support package) as listed here
i.e
Webview_CS - IE 6on6 RenderCore component for OS use, arabic - replaces Webview
Riched20_CS - Rich HTML Editor support - Arabic builds - replaces Riched20
may be i will try build one with those packages later if you still can't manage to fix it yourelf

Testing 28011 alternative 6.5.x for 910c/912c/914c
I installed and tested the re-build rom and I must say it works very well, with the other montecrito rom could not have the garmin software and Windows Live Messenger running simultaneously because the garmin was abruptly aborted, with this rom it does not, both work perfectly so silmuntanes. Although there are some menus that appear at 128 dpi but I guess that finally was resolved by Microsoft in the upcoming version, everything else works perfect.
Thanks for this rom alternative. Good job keyx !!!!

keyx said:
it is possible that you may need _CS(ComplesScript support package) as listed here
i.e
Webview_CS - IE 6on6 RenderCore component for OS use, arabic - replaces Webview
Riched20_CS - Rich HTML Editor support - Arabic builds - replaces Riched20
may be i will try build one with those packages later if you still can't manage to fix it yourelf
Click to expand...
Click to collapse
how do i get this packages nd do u know how 2 install them?
tnx

you can probably find them in the rollup package by da-g
however i believe you need to cook them into rom so basically you need to use the kitchen replace appropraite folders with those and cook again

keyx said:
you can probably find them in the rollup package by da-g
however i believe you need to cook them into rom so basically you need to use the kitchen replace appropraite folders with those and cook again
Click to expand...
Click to collapse
found this post but didnt see any heb...
im downloading the all pack 2 check if there will be something
anyway we do have heb support that u can buy so there must be also a solution without cooking the rom
but it will be great 2 have one rom with heb support (RTL) in it
will keep u updated

no heb resources files (i.e heb user interface) but in the rollup there are those complex script support packages.
i don't know if you can make it work without cooking, you can always try recmod the module into dll and use quickcab to make a cab to put them in windows directory

MDM
Hi Keyx,
In this thread you mentioned that VPN/Domain Enroll are disabled.
Could you explain me the steps to take te reenable this functionality?
Thanx
Sjefke

sjefke007 said:
Hi Keyx,
In this thread you mentioned that VPN/Domain Enroll are disabled.
Could you explain me the steps to take te reenable this functionality?
Thanx
Sjefke
Click to expand...
Click to collapse
I believe you need to cook in the following 2 packages:
Enterprise - IPSec, l2TP and Winscard support?
IPSECVPN - IPSec VPN Support

keyx said:
I believe you need to cook in the following 2 packages:
Enterprise - IPSec, l2TP and Winscard support?
IPSECVPN - IPSec VPN Support
Click to expand...
Click to collapse
It seems that I also need FWUPDATE, but I can't find it in you kitchen. Do you you where to find this for 28011?
**edit
This package contains some more dll's: http://wiki.xda-developers.com/index.php?pagename=FWUPDATE
**/edit
BR
Sjefke

I kinda doubt you need FWUPDATE because I think it is for image update system...anyhow you can find them here or extract them from the origina 28011 flash.dio posted by people in the da-g thread

Android - Share Contacts by SMS - [2011-03-20]

I was fascinated by Google Android platform and about one year ago I bought my first Android phone (HTC Magic). Well the platform was not that much mature at that time and my phone was lacking many features. With time it matured and evolved. After waiting a long time and spending a lot of hours to search a application which could send business cards and receive them as well, I couldn't find one which could fulfill my needs. So I decided to create one for me.
Here I present my first android application - Share Contacts
Minimum Requiremet:
Android 2.1
Features:
Send contacts by SMS
Pick up contact information from saved contracts
Send Customized information
Retrieve contact information from SMS
Save retrieved Contact Information in Phone Contacts
Application APK file is attached here.
Please give it a try and provide your feedback (if possible)
THANKS
Version 1.0 [2010-02-02]
Send contacts by SMS
Pick up contact information from saved contracts
Send Customized information
Retrieve contact information from SMS
Save retrieved Contact Information in Phone Contacts
Customize business Card before sending /saving
Integration with Phone/Contacts Application for sharing contact
Version 1.1 [2011-02-28]
Add Contact with Sync Facility (with Google only) - If no account configured then saved with "Phone only"
Fixed some spell mistakes
Version 1.2 [2011-03-02]
Modified Manifest file to allow Android 2.1 user. android:minSdkVersion="7"
Note: User with Android 2.2 or above need not to upgrade to this version, No other changes in this version.
Version 1.3 [2011-03-12]
Added new Icon - More descriptive what application does. Hope you like it.
NOTE: For version 1.4 update, Please un-install previous version (if applicable) before update. Otherwise previous version will not be replaced.
Version 1.4 [2011-03-18]
Fixed the issue with Character Encoding (e.g. Cyrillic alphabet)
"NOTE" in received business card Message will be saved successfully [limitation only one note can be processed]
Version 1.5 [2011-03-20]
- Application Available to Android Market.
- Fixed force close issue due to missing Name/First name
- Fixed internal bugs to improve performance
To Install Scan image or just click from Phone:
From Android Phone:
market://search?q=pname:isoftmagic.share.contact
Android Web Market:
https://market.android.com/details?id=isoftmagic.share.contact&feature=search_result
Please, Post your response and if you liked it "click thanks" and Tweet...somehow it encourages me. Thanks for your support!!!
Thanks "mic_888" for recognition and post on XDA - Portal!!!!

what your app name in market?

I didn't published to market thatz why i shared the apk file with post
Sent from my HTC Magic/Dream using XDA App

Is this open-sourced?
er.vikas said:
I was fascinated by Google Android platform and about one year ago I bought my first Android phone (HTC Magic). Well the platform was not that much mature at that time and my phone was lacking many features. With time it matured and evolved. After waiting a long time and spending a lot of hours to search a application which could send business cards and receive them as well, I couldn't find one which could fulfill my needs. So I decided to create one for me.
Here I present my first android application - Share Contacts
Minimum Requiremet:
Android 2.0
Features:
Send contacts by SMS
Pick up contact information from saved contracts
Send Customized information
Retrieve contact information from SMS
Save retrieved Contact Information in Phone Contacts
Application APK file is attached here.
Please give it a try and provide your feedback (if possible)
THANKS
Click to expand...
Click to collapse

Beach_Head said:
Is this open-sourced?
Click to expand...
Click to collapse
Till now I didn't uploaded it to any source-code sharing site...may be in near future... based on users response

Okay. Well, I think I'll give it a try...
er.vikas said:
Till now I didn't uploaded it to any source-code sharing site...may be in near future... based on users response
Click to expand...
Click to collapse

This AWESOME! Its seems to be working flawlessly on my Nexus One on CM7 nightly rom. Will update more observations soon. God bless you for this.
Aside : I wish others with programming skills would make such amazingly meaningful apps instead of eye candy themes. I hope I learn android programming soon.

Can I see your permissions from your manifest file? LOL

why you need that ?.... anyway... here is list of permission:
android.permission.GET_ACCOUNTS
android.permission.READ_CONTACTS
android.permission.WRITE_CONTACTS
android.permission.READ_SMS

Contact saved from received vcard goes into 'phone only, unsynced' group. This cannot be synced with Gmail.
Can you please provide options to choose where/which account to save the contact in?
This would make it perfect!!

KoolPal said:
Contact saved from received vcard goes into 'phone only, unsynced' group. This cannot be synced with Gmail.
Can you please provide options to choose where/which account to save the contact in?
This would make it perfect!!
Click to expand...
Click to collapse
Thanks!!!! Nice suggestion, I can try to make it happen....

Any updates?

Perfect! Now it saves contact into default Google account!
Awesome! God bless you for this!!

i am the only with installation problem?
from the device : there was error parsing the package
from adb install..
/adb install aha_signed.apk
1397 KB/s (109332 bytes in 0.076s)
pkg: /data/local/tmp/aha_signed.apk
Failure [INSTALL_PARSE_FAILED_UNEXPECTED_EXCEPTION]
tried to resing the apk, dosent help at all..
google about that and found that may be:
android:versionName="1.1"
can lead to problems (something about digit, which is not understood as digit etc...)
How can i modify AndroidManifest.xml ? ( i have found java -jar AXMLPrinter2.jar , which can "decode" it, but did not found how to "encode" it )
p.s. trying of android 2.1 (aka eclair) "stock" version

peshovec said:
i am the only with installation problem?
from the device : there was error parsing the package
from adb install..
/adb install aha_signed.apk
1397 KB/s (109332 bytes in 0.076s)
pkg: /data/local/tmp/aha_signed.apk
Failure [INSTALL_PARSE_FAILED_UNEXPECTED_EXCEPTION]
tried to resing the apk, dosent help at all..
google about that and found that may be:
android:versionName="1.1"
can lead to problems (something about digit, which is not understood as digit etc...)
How can i modify AndroidManifest.xml ? ( i have found java -jar AXMLPrinter2.jar , which can "decode" it, but did not found how to "encode" it )
p.s. trying of android 2.1 (aka eclair) "stock" version
Click to expand...
Click to collapse
I think you have installed earlier version and now you are trying to install it without un-installing it.
try this:
adb install -r aha_signed.apk
if it doesn't work then un-install it manually and then try...
Good luck

sorry, that didn't mention that
it is first install
have tried the reinstall option too
Sent from my Milestone XT720 using Tapatalk

Please download version 1.2. I have fixed the issue. Now Manifest file has following entry
android:minSdkVersion="7" (Android 2.1)
Sorry for Inconvenience!!!!

thanks
installed now successfully
Sent from my Milestone XT720 using Tapatalk

Hey, another request.
Am using this on Nexus One with a CM7 Nightly Tom.
Currently you need to scroll to select the contact you wish to send.
I use the search key, it pops up, but it does not register any entries and therefore cannot find the specific contact.
Can you please include a search option?
Thanks.

User Manual
KoolPal said:
Hey, another request.
Am using this on Nexus One with a CM7 Nightly Tom.
Currently you need to scroll to select the contact you wish to send.
I use the search key, it pops up, but it does not register any entries and therefore cannot find the specific contact.
Can you please include a search option?
Thanks.
Click to expand...
Click to collapse
There is very easy work around for this.
Open Contacts App -> search contract -> menu -> share -> select "Share Contact" app -> You get the contact in "Share contacts" Application
Please let me know if it works for you

[FIX] Credo Wireless + Custom ROM = no MMS

This will probably not apply to many members of this forum, but for anyone coming here with an ns4g from CREDO Wireless rather than Sprint I have found a potential problem and its solution with using custom ROMs.
If you install a ROM that changes the MMSC URL you will no longer be able to send MMS. You can find your current URL by using the Data Programming dialer code: *#*#3282#*#* then selecting view -> Others -> MMSC URL.
The fix for this is to use the correct url for CREDO of can't post links ask me and I would be happy to share. To edit the url entry you'll need your MSL number from CREDO. I was able to simply call them up and ask for the number I do not know if I got lucky or if this is their standard policy.

I can now post url's so here it is: http://mms.plspictures.com