Hello my friends,
I have cooked a rom with the last EXT packages from the OObe Rom, and, when i wand turn ON the wifi, it don't turn ON.
Have you an idea fof this problem ?
Thanks a lot,
regards,
Nixeus
Related
Hi all,
i've a problem and i think that this is the only plase where find one possible solution!!
My Citroen have a bluetooth module that work fine with an HTC Tytn but Cruise.
With my new Cruise, the bluetooth are able to accept fine only the first call: after this, the next will switch off the audio (in fact i need to put my phone on my ear!!)
i've tried to change firmware and some radios without results! Can anyone help me??
I had this problem a few times with my Cruise working with the stock rom (WM6) and my Parrot CK3100, after upgrading to WM6.1 (udK Diamond) i never had the problem again. Im still working with my stock radio rom btw.
Thanks!! Can you send me link for downloading rom that you say, traslate in italian??
Ok...i've installed udK Diamond R4 WWE and i've saw some changes on my car but....voice calls have the same problem!
So, if i've undestood right, the problem is on the s.o. firmware and not on radio firmware??
fabrysious said:
Ok...i've installed udK Diamond R4 WWE and i've saw some changes on my car but....voice calls have the same problem!
So, if i've undestood right, the problem is on the s.o. firmware and not on radio firmware??
Click to expand...
Click to collapse
Wait a little while until WM6.1 official for polaris is available that will hopefully solve all problems with bt...
uh?? WM6.1 will be released?? When??
But do you think that is the version of WM that create my problem? I've tried with a TYTN with WM6.0 and it is working fine!
Did you try your offical rom with the new HTC bluetooth fixes?
http://forum.xda-developers.com/showthread.php?t=400752
NO!! Thanks!!!
Where can i find official rom for my italian cruise?? Or i can apply those patches to all firmware?
Offical HTC ITA rom
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
I suggest first try the fixes with the offical rom....
If it works, try them with the cooked roms...
...it didn't work!! I've installed original rom and after i've applied those two fixes without any result!
Do you have another idea for me? i'm desperate!
Hi,
I had a almost same issue with original ROM and with SONY MEX-BT2500 autoradio. It works fine with handsfree BT profile but with A2DP (stereo via BT) it worked only on first connect (disconnect after engine stop and start). I found 2 solutions:
1) after "engine restart" press number 6 on radio - it connects again to Cruise
2) flash ROM to Bepe 0.67 - it reconnect automaticaly.
...now I flashed ROM to udK Diamond R4 and I am using 1)
Hello guys!I have a problem: when I install a cooked rom on my HTC HD2 like axlor v7,axlor v8,axlor v9,arthemisv7,michy's pure1.1,leon 1.4,after the hard spl and the correct radio,the proximity sensor doesn't work and during a call the screen turns off and I can't use the dialer(incall menu).I don't have this problem with original rom 1.66.Why?
Thank's to all!
pie9860 said:
Hello guys!I have a problem: when I install a cooked rom on my HTC HD2 like axlor v7,axlor v8,axlor v9,arthemisv7,michy's pure1.1,leon 1.4,after the hard spl and the correct radio,the proximity sensor doesn't work and during a call the screen turns off and I can't use the dialer(incall menu).I don't have this problem with original rom 1.66.Why?
Thank's to all!
Click to expand...
Click to collapse
i have same problem need to press button to activate screen.its like the sensor deactivates
hello everyone,
i was cooked same wm 6.5 roms for htc opal qvga divace. i fixed all basic bugs but i cant fix bluetooth notification.how to i fix this bug pleas help me.
thanks in advance******
mehulkarate said:
hello everyone,
i was cooked same wm 6.5 roms for htc opal qvga divace. i fixed all basic bugs but i cant fix bluetooth notification.how to i fix this bug pleas help me.
thanks in advance******
Click to expand...
Click to collapse
U have to use phoncanvas and taskbar icon manager from same dump....
i have the same problem
maybe using blutooth pkg from offical 6.1 Build fix the problem
hello fellow chefs
since shortly i became aware that bluetooth isnt working on the hd2 rom i made:-o
the thing i did is download the 1.66 dutch rom and dump it with ervius kitchen(i use this ktichen for rom making)
i changed the ext packages to the ones i use for blackstone and changed a few packages with the original 1.66 packages like dshow, concurrence manager, camera, fm radio and comm manager
then i rebuild it and it looks the same as on my blackstone and almost everything works except bluetooth
when i go to start>settings>bluetooth i get the screen that bluetooth isnt on and if i want to turn it on
when i press yes i get the message that the bluetooth stack cant be started
when i flash a kwbr rom bluetooth works so it isnt a mailfunction of the device
also yesterday before the server crash i posted a thread for this and af974 posted that the bleutooth settings whas a package he had never seen in leo roms although i get it from the dump of the dutch leo rom 1.66 and 1.72 vodafone roms so whats up with this package:S
i atach my buildlog and want to thank for any tips on how to solve it
edit: i just checked with other leo roms i have stored and when i looked at 3.01 wwe rom the oemdriver and oemdriverhigh folders are in total 3 mb bigger then the ones i get from the dutch roms
you think i can change it with those? as i dont quite understand the differnece between the american and european leo's:S
And you also played with SYS.
Best to take a look at a SYS from a stock rom. The HD2 has a few things that are in OEM.
You can definatly removing following from your SYS:
Bluetooth Included -> is in OEM
IRDA -> Leo does not have infa red port
SMS_Providers
WinCENLS_WWE -> in XIP
and a few more, just compare an original with yours
pkoper said:
And you also played with SYS.
Best to take a look at a SYS from a stock rom. The HD2 has a few things that are in OEM.
You can definatly removing following from your SYS:
Bluetooth Included -> is in OEM
IRDA -> Leo does not have infa red port
SMS_Providers
WinCENLS_WWE -> in XIP
and a few more, just compare an original with yours
Click to expand...
Click to collapse
thanks mate
never thought there could be bluetooth there:-o
just took the entire sys/xip folders i use in my blackstone kitchen
hey, i had the same problem as you some time ago. it was because of my modifications in initflashfiles.ini, check if
"Directory("\Windows\AutoStart"):-File("BTTrayCE.lnk","\Windows\BTTrayCE.lnk")"
is in yours or any other app.dat
maybe this will help you
lauchi said:
hey, i had the same problem as you some time ago. it was because of my modifications in initflashfiles.ini, check if
"Directory("\Windows\AutoStart"):-File("BTTrayCE.lnk","\Windows\BTTrayCE.lnk")"
is in yours or any other app.dat
maybe this will help you
Click to expand...
Click to collapse
thanks for the tip
dont have this in the 0413 initflash but i do have it in the english one i have:S
will put it in to be sure
also deletd the files from the sys folder wich i compared to the one from the dumps i have from leo roms
only downside is i forgot to take out cmbluetooth so it didtn work
gues you guys dont use that in the leo rom?
didnt see it in the dumps
miniterror said:
thanks for the tip
dont have this in the 0413 initflash but i do have it in the english one i have:S
will put it in to be sure
also deletd the files from the sys folder wich i compared to the one from the dumps i have from leo roms
only downside is i forgot to take out cmbluetooth so it didtn work
gues you guys dont use that in the leo rom?
didnt see it in the dumps
Click to expand...
Click to collapse
Nope don't use it on the Leo and you need bttrayce to start at bootup to be able to enable bluetooth
hmmm
made sure that Directory("\Windows\AutoStart"):-File("BTTrayCE.lnk","\Windows\BTTrayCE.lnk") whas in the initflash.dat file and took out all bluetooth packages out of sys and ext packages but still no bluetooth:S
gonna try changing to 2.13 base
any one knows of fixes are needed there
What error are you getting when you try to start bluetooth?
EpiphanyNL said:
What error are you getting when you try to start bluetooth?
Click to expand...
Click to collapse
de bluetooth stack kan niet gestart worden
or in english the bluetooth stack cant be started
i am trying to make a dutch rom and i wha slooking at the iniflahs again yesterday and i saw i used the english lines in a dutch rom so that whas a little wrong
yesterday evening i changed base drivers to 2.13 and gonna flash it somewhere today as i dont have the actual device myself
edit:
used 2.13 as a base and bluetooth can start now but i cant make it visible
gonna say to my friends they need to wait and ill redo the kitchen again but with alot less copy pasting
and translate the entire initflash.dat(or use one from 1.66 nld base)
miniterror said:
(or use one from 1.66 nld base)
Click to expand...
Click to collapse
That's what I did
thanks
thnx a ton buddy ur trick worked... feeling so relaxed now....
Hi friends,
My HD2 GPS is not working. I even tried installing android but didn't help.
Any suggestions.
Flash a stock ROM, 3.14 from HTC if that doesn't fix it then you have a hardware fault.