Related
Hello,
Does anybody know if there is already an official HTC Dutch shipped ROM available for the HTC Touch Cruise?
I would like to try some of the ROMs available in this forum, however I want to be able to switch back to the original Dutch ROM in case of problems.
Peter
I second that.
Eager to try those light and clean ROMs
I need one too...anyone has an idea how to dump your own ROM?
That makes four of us in need for a dutch ROM...
reken mij ook in 't rijtje...heb helaas ook geen dump gemaak
Please add me to the list.
I could dump the rom if someone tells me how to.
(orgineel draait nog)
--------------------------------------------------------------
Misschien via dit topic: http://forum.xda-developers.com/showthread.php?t=371533
I have raw files for you and maybe in a few days a complete ROM.
Can someone provide me some FTP access or webspace?
How much space do you need for the FTP?
Het is al opgelost:
Dumped Polaris NL (Dutch) Files:
(1.25.404.1 - if i'm correct)
Part 00: http://rapidshare.com/files/94263502/Part00.raw.html
Part 01: http://rapidshare.com/files/94264009/Part01.raw.html
Part 02: http://rs31.rapidshare.com/files/94262811/Part02.raw
Part 03: +100 MB, can't upload to rapidshare
The Part02 file is the file you are interested in.
Using this file you can create your own ROM.
Use this guide: http://www.modaco.com/content/HTC-H...rebuilding-and-restoring-your-HTC-HERMES-ROM/
!!! beware it does not describe a procedure specific for the Polaris . !!!
Have fun.
hartstikke bedankt
can someone with the (original) dutch version check what their spl number is if its still not hardspl-ed?
(hold camera button and press the reset button while still holdhing camera button)
I've managed to made a flashable Dutch rom. I've used the original WWE ruu_signed.nbh as donor and the files from Session. But although it's working, there are many things not installed: HTC Home as well as several icons are missing in the settings.
The new ruu_signed.nbh is about 17Mb smaller then the donor. If I extract the wwe nbh file it also produces a 17mb unknown.nb file. How can I add this to the os-new.bin? Using nbmerge didn't worked (i might be doing something wrong though).
tamAyT said:
I've managed to made a flashable Dutch rom. I've used the original WWE ruu_signed.nbh as donor and the files from Session. But although it's working, there are many things not installed: HTC Home as well as several icons are missing in the settings.
The new ruu_signed.nbh is about 17Mb smaller then the donor. If I extract the wwe nbh file it also produces a 17mb unknown.nb file. How can I add this to the os-new.bin? Using nbmerge didn't worked (i might be doing something wrong though).
Click to expand...
Click to collapse
Strange.
I also have the HTC Home problem (reinstalled HTC Home, problem gone). No icons missing as far as i can tell.
The HTC Home problem also exists in other custom ROMS I tried (WWE WM6.1).
But the WM6.0 NL ROM is slow as hell compared to a WM6.0 WWE.
Maybe an experienced cook can help us with this. I only tried one weekend and got this far.
tamAyT said:
can someone with the (original) dutch version check what their spl number is if its still not hardspl-ed?
(hold camera button and press the reset button while still holdhing camera button)
Click to expand...
Click to collapse
SPL-1.25.0000
CPLD-2
session said:
Strange.
I also have the HTC Home problem (reinstalled HTC Home, problem gone). No icons missing as far as i can tell.
The HTC Home problem also exists in other custom ROMS I tried (WWE WM6.1).
But the WM6.0 NL ROM is slow as hell compared to a WM6.0 WWE.
Maybe an experienced cook can help us with this. I only tried one weekend and got this far.
Click to expand...
Click to collapse
So you're missing the HTC Home to by default. And the icons I'm missing for instance is for example 'Device Information' (but then the Dutch translation of course).
Heeleven: thanks for the info
Any news about a flashable dutch rom?
Yzord said:
Any news about a flashable dutch rom?
Click to expand...
Click to collapse
The Dutch Rom Flashable is here: This one is the Original
http://rapidshare.com/files/96783810/Dutch_Dump.rar.html
I was unable to post my rom to the xda ftp site.
Somehow the ftp is broken and I can't log in properly. When that's done I'll post the latest rom image I pulled out of my device about a week ago.
Rom version I have is 1.27.405.1 NLD
Rroet
Dumped the rom to Rapidshare because ftp of xda seems to be broken.
Rom 1.27.405.1 NLD
Rroet said:
Dumped the rom to Rapidshare because ftp of xda seems to be broken.
Rom 1.27.405.1 NLD
Click to expand...
Click to collapse
Did you dump this rom before or after you were getting reception difficulties?
I am using ervius to build a rom, Everything works according to the kitchen except that it could not find the ppchanger. But that shouldn't be an issue. However, whenever I load it to the phone. It becomes stuck at boot. What am I doing wrong? Here's the build log.
Update: I moved the wincenls_wwe to my oem to no avail. still stuck at touch pro screen. Here's the latest build log after recmodding some files:
Everything seems to be ok and if it stucks in the first splash screen is issues related to XIP check your OEMxipkernel all the modules.... same format! check the MSXIPkernel all the modules same format!
i see you are addin manila but i couldn saw any manila pkg in OEM or EXT cause you dont have nothing in EXT and you just have OEM and SYS.. where did you get all of this OEm SYS and addons?
Thanks for your reply. All I did was dump a shipped rom. Then I tried to add a 6.5 build. The shipped rom had manila within the oem.
ok... first of all... wich device is it? wich rom was the original rom? 6.1 or 6.5? did you checked 6.5 real aku on the kitchen?
and yes dont forget to check the thread of how to make rom bootable..
+ Que PPC said:
ok... first of all... wich device is it? wich rom was the original rom? 6.1 or 6.5? did you checked 6.5 real aku on the kitchen?
Click to expand...
Click to collapse
Well I tried the Verizon XV6850_MR1_Upgrade_v2.0 for the Touch Pro. I am trying to create the rom for CDMA device (herman correct?) The original rom is 6.1 and I am trying to put the 21903 build. Yes I checked the aku 6.5. I've read the threads from others with the similiar issues. I've tried the recmod.exe in the Ervius tools folder, and I've also tried the recmod auto zip. I've downloaded and went through the list of sys files that can be recmodded with no luck. What steps exactly do I take to make sure that the oemxipkernel and msxipkernel are the same format?
Hi well it seems that you need to know this, if your dumped rom was 6.1 your kernel is not real aku 6.5 so you dont check that box in the kitchen
+ Que PPC said:
Hi well it seems that you need to know this, if your dumped rom was 6.1 your kernel is not real aku 6.5 so you dont check that box in the kitchen
Click to expand...
Click to collapse
oh... so even if I am using 6.5 sys & xip.bin if I am bringing over the oem kernel from the base rom then I should NOT check it... Is that what you are saying?
Exactly!
If you dump the 6.1 STOCK ROM you will have xip.bin payload rromhdr.bin and OEMXIPKERNEL V6.1 and you will not check the the real aku6.5 on the kitchen
If you dump a 6.5 STOCK rom you will have everything in 6.5Version so you can check that checkbox... Why you dont take a look into the main stickie in repositories maybe you can find your Native 6.5 OEMXIPKERNEL and send to the hell the 6.1 version
+ Que PPC said:
send to the hell the 6.1 version
Click to expand...
Click to collapse
+1...man its been probably about 2 yrs since I used a 6.1 ROM! lol
+ Que PPC said:
Exactly!
If you dump the 6.1 STOCK ROM you will have xip.bin payload rromhdr.bin and OEMXIPKERNEL V6.1 and you will not check the the real aku6.5 on the kitchen
If you dump a 6.5 STOCK rom you will have everything in 6.5Version so you can check that checkbox... Why you dont take a look into the main stickie in repositories maybe you can find your Native 6.5 OEMXIPKERNEL and send to the hell the 6.1 version
Click to expand...
Click to collapse
So it doesn't matter if the 6.5 stock rom is not for cdma touch pros? As long as I choose the right dpi and of course remove gsm stufff then I can create a build for it? Am I right in my thinking?
yes the thing that makes the GSM or CDMA rom is in your OEMXIPKERNEL things and in your OEM folders
Wow!! This is some amazing stuff. Ok one more question, of late most builds do not include the oemxipkernels, and I've learned that you can generate this with xipport button in ervius. If i was to use this, and i port the os.payload & the build's xip.bin, should I check the box that this is a native 6.5 kernel?
Touch pro is the FUZE isnt it?
Why you dont ask in Da_G thread for the Native 6.5 TOUCH P kernel
i cant remember well but i guess i saw it
you dont need to do that the kitchen ports the xip.bin payload bal bla bla autopmatically for you
Just want to say thanks for your help. I find your insight very helpful. I will start from scratch and see what happens. Thanks again.
Hi,
I've done research on the forum here and found that to unlock the full 576 RAM in HD2 you need two things from the TMOUS ROM. The Radio and nk.exe. I've managed to download the appropriate Radio to unlock the memory but cannot for the life of me understand how to get the nk.exe.
I am using osKitchen Kitchen v1.25 to cook my roms. It uses the following structure under the Sources folder:
EXT
MSXIPKernel
NK
OEM
Other
ROM
SYS
Replacing the NK folder in the TMOUK kitchen from the TMOUS ROM simply does not work the resultant ROM does not boot and just hangs the device.
Could one of our chefs please explain how to port the nk.exe from the US build to unlock the memory in the T-Mobile UK ROM 1.72.
Using the following 576-enabled Radio
RUU_Leo_Radio_15.34.50.07U_2.08.50.08_2
Many thanks in advance
Mod edit: SOLVED
thecrater said:
Hi,
I've done research on the forum here and found that to unlock the full 576 RAM in HD2 you need two things from the TMOUS ROM. The Radio and nk.exe. I've managed to download the appropriate Radio to unlock the memory but cannot for the life of me understand how to get the nk.exe.
I am using osKitchen Kitchen v1.25 to cook my roms. It uses the following structure under the Sources folder:
EXT
MSXIPKernel
NK
OEM
Other
ROM
SYS
Replacing the NK folder in the TMOUK kitchen from the TMOUS ROM simply does not work the resultant ROM does not boot and just hangs the device.
Could one of our chefs please explain how to port the nk.exe from the US build to unlock the memory in the T-Mobile UK ROM 1.72.
Using the following 576-enabled Radio
RUU_Leo_Radio_15.34.50.07U_2.08.50.08_2
Many thanks in advance
Click to expand...
Click to collapse
For the 576MB patch you need only to replace these folders from an 2.07 or 2.02 Stock-Rom:
Rom\XIP\OEMXIPKernel\nk.exe
OEM\OEMDrivers
OEM\OEMDriversHigh
Then you need to replace again with this folder
OEM\OEMDrivers\ddi.dll
with an older Base than 2.07/2.02 (1.72 in your case is recommended)
patensas said:
For the 576MB patch you need only to replace these folders from an 2.07 or 2.02 Stock-Rom:
Then you need to replace again with this folder
OEM\OEMDrivers\ddi.dll
with an older Base than 2.07/2.02 (1.72 in your case is recommended)
Click to expand...
Click to collapse
Why ddi.dll ? mine works fine with new 2.13/2.11/2.10 ddi.dll
patensas said:
For the 576MB patch you need only to replace these folders from an 2.07 or 2.02 Stock-Rom:
Rom\XIP\OEMXIPKernel\nk.exe
OEM\OEMDrivers
OEM\OEMDriversHigh
Then you need to replace again with this folder
OEM\OEMDrivers\ddi.dll
with an older Base than 2.07/2.02 (1.72 in your case is recommended)
Click to expand...
Click to collapse
Thank you very much indeed for your kind help. It worked perfectly
Hi, I'm a newbie for ROM cooking, experienced cookers, please advise.
I'm using HD2/Leo phone, I learned how to use HSPL, flash a cooked ROM, so I'm start thinking of cooking the ROM my own, and what all I need is retain original 1.66 707.1 Asia WWE version of stock ROM, but only to enable 576MB RAM.
I found a kitchen, oskitchen zero 1.31, use the GUI and extracted the stock ROM, and stop here, because I don't know how to cook the ROM...
Experienced cookers, please advise, thanks in advance!!!
patensas posted like 2 posts up from yours which files you need to replace.
which means that i just copy all the folder need, then paste inside the osKitchen Zero folder, and finally click "Start building button" to cook my ROM...?
I also want to know why ddi.dll need to be remain old version?
OEM\OEMDrivers\ddi.dll
hello fellow chefs
i am trying to make a verry smooth rom in dutch for soem friends of mine
it is working out quite well but i want to enable the 576 ram tweak
in patensas his post he says i need to change things from a tmous rom
if i use the tmous 2.13.531.1 as base rom do i still need to change those folders?
thanks in advance
sorry to ask but coul some one upload the files to make the 576 mb tweak?
i have 2.13 tmous as base in the kitchen and it would save me a download and dump
thanks in advance
All you need is in the 2.13 TMOUS.
pkoper said:
All you need is in the 2.13 TMOUS.
Click to expand...
Click to collapse
then i dont get it:-o
i installed Leo_RADIO_15.34.50.07U_2.08.50.08 on the phone but no 576 mb tweak:S
Using 2.13 base you should have 576 anyway.
What did you change?
pkoper said:
Using 2.13 base you should have 576 anyway.
What did you change?
Click to expand...
Click to collapse
to be honest i have no idea why it aint working
when you got the settings tab and scroll down to device info
there you choose hardware info it should also say 576?
the thing i did is dump the tmous 2.13 rom with ervius
then i took out the 0409 folder in oem and replaced it with the the one i use for blackstone(maybe the fault is here) then i replaced the ext packages with the ones i use i blackstone kitchen(compared wich are unnesacary and left those out) and then recooked the rom
i also decided today that i am gonna rebuild the entire kitchen from scratch without copy pasting the 0409 folder in oem and set everything up from there and remake the initflash.dat the way i want it
i havent changed the ddi.dll so that might be the trick why it aitn working
on side note:
wish i whasnt in the middle of moving and had the actual device for a few days
that would definetly make things easier for me
ps: what do you think is the best base to use to build the kitchen on with ervius kitchen
tmous 3.14? it would sound logical that newer is better although there are differences between the american and european leo's
Hi all !
I'm trying to cook a personal custom rom I just want to change the build from 6.5 to 6.5.X of the official htc 3.14 italian rom. I would also like to enable the 576 mb of ram. I have already installed on the phone the 2.15 radio, what files I need to change inside the kitchen ( I use oskitchen ) ? I have a t-mobile.uk hd2 ( I have bought it from england.
so I think that it's the european version )
light_n_roses said:
Hi all !
I'm trying to cook a personal custom rom I just want to change the build from 6.5 to 6.5.X of the official htc 3.14 italian rom. I would also like to enable the 576 mb of ram. I have already installed on the phone the 2.15 radio, what files I need to change inside the kitchen ( I use oskitchen ) ? I have a t-mobile.uk hd2 ( I have bought it from england.
so I think that it's the european version )
Click to expand...
Click to collapse
Take the nk.exe(from oemxipkernel) from 2.13 tmous.I think also the nk.exe from 3.14 tmous should be ok but I havent try it.
Could someone just post an attachment with the modules needed to enable the extra RAM? I'm sure it would make it easier for everyone. I'd do it, but I don't have an hd2.
Farmer Ted said:
Could someone just post an attachment with the modules needed to enable the extra RAM? I'm sure it would make it easier for everyone. I'd do it, but I don't have an hd2.
Click to expand...
Click to collapse
The way that the European Leo device gets the 576 ram enabled is the following:
Replace the nk.exe with the nk.exe from TMOUS rom (in Sources\Devices\HTC Leo\Profiles\default\OEMXIPKernel folder for oskitchen, or \ROM\LEO\build number\OEMXIPKERNEL for ervius kitchen).
I attach the 2.13 tmous and 3.14 tmous nk.exe modules.Both do the trick or enable the 576 ram (for those who believe it).
Personally in my Leo I didnt see any difference with the 576 ram enabled.
Hey, there, guys...
It's me, little old Bruno, the Iolite and Mega Chef...
I just bought a Leo and I'm cooking for it, but the most advanced base I can have is a 1.80 based Kitchen...
If I have any other than that, for some stupid reason, I can't boot after the RUNCC reboots my device...
It hangs at the welcomehead screen with the light a little dimmed IF I HAVE THE SD CARD INSERTED...
Otherwise it will boot fine...
Obviously I have read many threads and used search, but it appears no one else is having this issue... Only the FM Radio and Wireless issues that come from using the 2.14 / 3.04 Drivers bundle.
I know this is a driver issue and I was wondering if you have got a working 2.14 or 3.04 based kitchen that I can have so I can start my cooking...
On a quick note:
I am using the 3.04 EXT Packages + 3.04 OEMDrivers, OEMDriversHigh, OEMMisc folders + 2.14 nk.exe only
Best regards,
billabongstaff said:
Hey, there, guys...
It's me, little old Bruno, the Iolite and Mega Chef...
I just bought a Leo and I'm cooking for it, but the most advanced base I can have is a 1.80 based Kitchen...
If I have any other than that, for some stupid reason, I can't boot after the RUNCC reboots my device...
It hangs at the welcomehead screen with the light a little dimmed IF I HAVE THE SD CARD INSERTED...
Otherwise it will boot fine...
Obviously I have read many threads and used search, but it appears no one else is having this issue... Only the FM Radio and Wireless issues that come from using the 2.14 / 3.04 Drivers bundle.
I know this is a driver issue and I was wondering if you have got a working 2.14 or 3.04 based kitchen that I can have so I can start my cooking...
On a quick note:
I am using the 3.04 EXT Packages + 3.04 OEMDrivers, OEMDriversHigh, OEMMisc folders + 2.14 nk.exe only
Best regards,
Click to expand...
Click to collapse
Hello.
Download that kitchen as base and add the 3.04 OEMDrivers, OEMDriversHigh, OEMMisc folders as is it.
http://www.vbnfiles.com/xda/birkoffsjunk/Chucky/ChuckyKitchen.July.23.7z
For the fm radio the solution is here:
http://forum.xda-developers.com/showthread.php?t=618787
For the MAC the solution is to replace the bcmsddhd.dll from 2.14 driver folder.
http://forum.xda-developers.com/showpost.php?p=7293946&postcount=2
That's it. If you have problem's after that then look at your EXT package's or post here.
Thank's.
ausdim said:
Hello.
Download that kitchen as base and add the 3.04 OEMDrivers, OEMDriversHigh, OEMMisc folders as is it.
http://www.vbnfiles.com/xda/birkoffsjunk/Chucky/ChuckyKitchen.July.23.7z
For the fm radio the solution is here:
http://forum.xda-developers.com/showthread.php?t=618787
For the MAC the solution is to replace the bcmsddhd.dll from 2.14 driver folder.
http://forum.xda-developers.com/showpost.php?p=7293946&postcount=2
That's it. If you have problem's after that then look at your EXT package's or post here.
Thank's.
Click to expand...
Click to collapse
Didn't work...
And my custom EXT package works both on Iolite and Mega, so that's not it...
Maybe it's the HTC EXT packages??? I used every EXT packages from 3.04 and only a couple from another build (like Task Manager)... Is there any package I should exclude for it to boot?
I'll upload the build_log.txt...
Build_log here.
Thank you for your help...
Best regards,
Might be notification enhancment. Did you recmod it?
Not sure what kitchen you are using but I would dump the ship ROM in to your kitchen first Recmod NTConfig.dll then try to rebuild the ROM. When successful replace SYS and try again.
I'm personally using 2.14 as a base with EXT from 3.04. Some people have reported problems with the 3.04 base. You can get it to work but as mentioned you have to change out some drivers etc.
What device are the kitchen for ?
Ext packs 3.04 are made for HD2 WVGA basically
I had problem with 3.04 OEMs with "normal" HD2 but did not spend time to investigate further or attempted to fix it, perhaps some of you may help.
Here are a few as I remembered...
The WiFi driver broke the MAC address (which file is it?)
The RAM/device storage size became way smaller.
However, most fo the EXTs are working except very few...
maesus said:
I had problem with 3.04 OEMs with "normal" HD2 but did not spend time to investigate further or attempted to fix it, perhaps some of you may help.
Here are a few as I remembered...
The WiFi driver broke the MAC address (which file is it?)
The RAM/device storage size became way smaller.
However, most fo the EXTs are working except very few...
Click to expand...
Click to collapse
if you use Leo S 3.04, you need to replace nk.exe from earlier rom, say 2.14. I had this prob where all the ram and storage is reduced, someone here pointed it out to me.
HD2Owner said:
to fix the fm-radio (3.xx)
replace oemextdll.dll and oem_misc.dll with the ones from 2.XX-rom
to fix asian wifi (3.04tw):
bcmsddhd.dll from 2.XX-rom
Click to expand...
Click to collapse
to fix the low memory issue:
use nk.exe from 2.xx-rom
to fix tmous-compatibility:
use nk.exe and os.nb.payload from 2.xx-rom
btw:
why did you open two identical threads in different sections???????
Got the same strange problems but only if I'm using OEMDrivers and OEMDriversHigh from ROMs newer than 2.13 ...! OEMXipKernel with patched nk.exe works great but no OEMDrivers! >.<
I have a kitchen out. It's a TMOUS with 2.13 OEM and upgraded EXT's to 3.04. It's an EVK kitchen, here's the link:
[Kitchen] [7-5-10] RSToyGuy's TMO.US EVK 2.07 /\ DIY 3.15 Kitchens
rstoyguy said:
I have a kitchen out. It's a TMOUS with 2.13 OEM and upgraded EXT's to 3.04. It's an EVK kitchen, here's the link:
[Kitchen] [7-5-10] RSToyGuy's TMO.US EVK 2.07 /\ DIY 3.15 Kitchens
Click to expand...
Click to collapse
EXT packages aren't that problem, the problem is OEMDrivers and OEMDriversHigh!
Hi, Greetings
Im cookin my own rom, sys 23536 i installed the lang 0c0a and everything works great but im trying to put manila 2.5 and when the phone boot the menu setting from start menu dissappears, only show home tab.
In home tab only show the clock and the appointment, the h-bar with all tab dissappears. i cant change the tabs.
I dont know how to fixed, i would appreciate any helps.
Thanks and sorry for my english.
Edit:
Theres no sliding bar only the button like landscape
Info:
Phone: Htc RhodiumW Touch Pro 2 CDMA-GSM WorldPhone
Kitchen Os Builder 1.1.5
Sys 23563 MULTILANG - ROM-XIP 21887
MSXIPKernel 5.2.21887.5086
MSXIPKernelLTK 5.2.21887.5086
Manila_Sense_2_5_20173921_0
Originaly this kitchen was an 0409 kitchen from indagroove and i inserted the new sys 23563
EDMYJOSE said:
Hi, Greetings
Im cookin my own rom, sys 23536 i installed the lang 0c0a and everything works great but im trying to put manila 2.5 and when the phone boot the menu setting from start menu dissappears, only show home tab.
In home tab only show the clock and the appointment, the h-bar with all tab dissappears. i cant change the tabs.
I dont know how to fixed, i would appreciate any helps.
Thanks and sorry for my english.
Click to expand...
Click to collapse
S i had this problem when i start cooking for a first Time it show only today in start menu... I think thé problem is from Start_Menu_Grid.CPR ...but I did not sure...
This is the reg key for having back WM Settings in Start Menu:
Code:
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo]
"HideSettings"=dword:00000000
Be sure to cook it at least after Manila in your Kitchen.
af974 said:
This is the reg key for having back WM Settings in Start Menu:
Code:
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo]
"HideSettings"=dword:00000000
Be sure to cook it at least after Manila in your Kitchen.
Click to expand...
Click to collapse
Thanks af974
Well, the reg key, works fine, i cooked again the rom but now manila not boot i have to activate from today and stay in tab in screen to boot manila and doesnt matter how much i tap, he never boot, i check the initflashes.dat and everythink is fine
I dont think that this reg key stop Manila booting but anyway you should try to delete it and cook again your rom to see if it boot up.
Did you touch something other apart the reg key?
EDMYJOSE said:
Well, the reg key, works fine, i cooked again the rom but now manila not boot i have to activate from today and stay in tab in screen to boot manila and doesnt matter how much i tap, he never boot, i check the initflashes.dat and everythink is fine
Click to expand...
Click to collapse
af974 said:
I dont think that this reg key stop Manila booting but anyway you should try to delete it and cook again your rom to see if it boot up.
Did you touch something other apart the reg key?
Click to expand...
Click to collapse
Hi.
I only apply the reg key to make appear the setting icon in start menu, my manila just finally booted with the same issues here is an screenshot
I booted from today. well i just add some prgram to oem and add more line to initflashes.dat about to manila and other programs. but i dont know how to fixed.
Thanks for all buddy.
The problem in the attached pics its a missing language file.
Are you cooking for an English rom?
It should be usefull if you post here much more informations and your build log so we can check it.
EDMYJOSE said:
Hi.
I only apply the reg key to make appear the setting icon in start menu, my manila just finally booted with the same issues here is an screenshot
I booted from today. well i just add some prgram to oem and add more line to initflashes.dat about to manila and other programs. but i dont know how to fixed.
Thanks for all buddy.
Click to expand...
Click to collapse
af974 said:
The problem in the attached pics its a missing language file.
Are you cooking for an English rom?
It should be usefull if you post here much more informations and your build log so we can check it.
Click to expand...
Click to collapse
Well my friend. y downloaded an english kitchen who has many build in 0409 for RhodiumW. i find and new sys 23563/xip.bin multilang and i added to the kitchen. and all the files 0409 i change it to 0c0a . every thing works fine. titanium works fine. but i cant make work manila.
I remember in one oportunity i cook in 0c0a and manila work fine but without the lang file, then i installed the lang pack and everything looks normally in 0c0a lang.
I think im missing to do something to make manila work fine.
Thanks for your help
There are 2 folders that contains insided the language folders:
Manila Core and Manila Home.
Now, i bet that you are cooking for 2018 sense?
My suggestion is to import an Original rom with your language and use that Manila for training.
Look here for some original roms http://shipped-roms.com/shipped/ im sure that you will find a 0c0a sense rom here.
Otherwise if you will find 0c0a Sense language for your current rom you will be good.
As a said you before , we need your log build for a better check.
EDMYJOSE said:
Well my friend. y downloaded an english kitchen who has many build in 0409 for RhodiumW. i find and new sys 23563/xip.bin multilang and i added to the kitchen. and all the files 0409 i change it to 0c0a . every thing works fine. titanium works fine. but i cant make work manila.
I remember in one oportunity i cook in 0c0a and manila work fine but without the lang file, then i installed the lang pack and everything looks normally in 0c0a lang.
I think im missing to do something to make manila work fine.
Thanks for your help
Click to expand...
Click to collapse
af974 said:
There are 2 folders that contains insided the language folders:
Manila Core and Manila Home.
Now, i bet that you are cooking for 2018 sense?
My suggestion is to import an Original rom with your language and use that Manila for training.
Look here for some original roms http://shipped-roms.com/shipped/ im sure that you will find a 0c0a sense rom here.
Otherwise if you will find 0c0a Sense language for your current rom you will be good.
As a said you before , we need your log build for a better check.
Click to expand...
Click to collapse
Ready i uploaded the buildlog.txt 2 image 1 with the lang pack installed and 2 without lang pack all is in the post #1, you was close im using Manila_sense_2_5_20173921_0
All the original rom i have to downloaded for my rhodiumW cdma-gsm is in 0409, no exist in 0c0a, but for rhodium gsm 1 or 2 is in 0c0a but have manila 2.1. i look in saint google fo an manila 2.5 0c0a and only fina the cab lang pack but not the manila oem.
I will look for other device to see if i can have the complete manila 0c0a.
You can use Rhodium GSM packages as well the most important thing is that you want never use the OEM Drivers or you will brick your phone, EXT packages are pretty the same.
If you did find the cab for language ,oh well, this is not a big problem, i attached a program that converts cab to oem/EXT ..install it in C:\ otherwise it will not works.
Its not easy find your language packages( Spanish?) for sense up to 1922 because for us European this is the only version made from HTC , the others(2012/2014/2016/2018) are from TMOUS and OBOE phones ,so only WWE or Chinese.
I have the same problem as you since im Italian infact my phone is still in English now.
EDMYJOSE said:
Ready i uploaded the buildlog.txt 2 image 1 with the lang pack installed and 2 without lang pack all is in the post #1, you was close im using Manila_sense_2_5_20173921_0
All the original rom i have to downloaded for my rhodiumW cdma-gsm is in 0409, no exist in 0c0a, but for rhodium gsm 1 or 2 is in 0c0a but have manila 2.1. i look in saint google fo an manila 2.5 0c0a and only fina the cab lang pack but not the manila oem.
I will look for other device to see if i can have the complete manila 0c0a.
Click to expand...
Click to collapse
Ready i uploaded the files and add new information in the post #1
I do not understand this
"..install it in C:\ otherwise it will not works."
You mean all the converted files i have to put it in root of the phone or use this program in drive c:\ of my pc. for the converter no problem because i have it with all the kitchen i have donwloaded, and i have converted all the prgrams i usually use, but im waiting to cook my rom good to after add my programs oems
Besides the Manila problem i would change your MXIPKernel with the original 23563 ,mixing SYS and XIP from 2 different builds should cause problems in your rom.
af974 said:
Besides the Manila problem i would change your MXIPKernel with the original 23563 ,mixing SYS and XIP from 2 different builds should cause problems in your rom.
Click to expand...
Click to collapse
Ok, i will change MXIPKernel with 23563 and only left OEMXIPKernel 21887 to see if works
af974 said:
Besides the Manila problem i would change your MXIPKernel with the original 23563 ,mixing SYS and XIP from 2 different builds should cause problems in your rom.
Click to expand...
Click to collapse
i figure out something. in my kitchen exist this folder, donors, ext, oem, rom, sys
in donors i put the MSXIPKernel or xip.bin 23563
ext i put all the oem programs
oem i put oemdriver, OEM_Lang_0C0A and other folders
rom i put xip.bin and MSXIPKernel, MSXIPKerneltk, OEMXIPKernel 21887
sys i put sys 23563
when i click go he automaticaly change MSXIPKernel 21887 for MSXIPKernel 23563.
so everythink works fine but im stuck with manila.
af974 said:
You can use Rhodium GSM packages as well the most important thing is that you want never use the OEM Drivers or you will brick your phone, EXT packages are pretty the same.
If you did find the cab for language ,oh well, this is not a big problem, i attached a program that converts cab to oem/EXT ..install it in C:\ otherwise it will not works.
Its not easy find your language packages( Spanish?) for sense up to 1922 because for us European this is the only version made from HTC , the others(2012/2014/2016/2018) are from TMOUS and OBOE phones ,so only WWE or Chinese.
I have the same problem as you since im Italian infact my phone is still in English now.
Click to expand...
Click to collapse
Well if u want i can give you sys 23563 multilang but in manila dont have
I trying to put an tier autoinstaller for when my phone is hard reset install other cabs automaticaly but when i put it he always ask me to select the cabs i want to install. i want after make the first boot he start the customization alone like this, "after booting he said 3,2,1 starting customization", i ben use xda_uc i don like. easy installer cant make work and runcc cant make work, never install the cabs.
Since you said that this is from my kitchen, why not post in my kitchen thread? You will likely get answers from the person who is most familiar with the kitchen you are using (Me) quickest that way.
Anyway, by looking at your build log, I see a few issues right off the bat. First of all, you need to take a look at the packages.sof file that you imported into the kitchen with the new sys. OSBuilder builds first based on packages.sof order, and then .dsm order if packages are not found in packages.sof. You are building packages all out of preferred order, which will not achieve desired results. Take a look at the packages.sof from my preconfigured kitchen, or better yet, download my most recent kitchen and just use that.
Also, I see that you are building in both phonecanvas versions. One version is for com2 and com 5 builds, and the other is for com 3 builds, so that will cause you some issues.
In regards to your manila issue, I believe that the kitchen you are working with likely only contains 0409 manila files, because I think that is the one and only build that I used the manila lang sorter on, and stripped all non wwe manila files from the kitchen. I'm talking about lang files in the manila common folders (which contain over 10 different languages by default -- even though these are supposed to be "common" files. The recent version of the kitchen does contain all lang manila files in common, you just need to add your lang pack.
indagroove said:
Since you said that this is from my kitchen, why not post in my kitchen thread? You will likely get answers from the person who is most familiar with the kitchen you are using (Me) quickest that way.
Anyway, by looking at your build log, I see a few issues right off the bat. First of all, you need to take a look at the packages.sof file that you imported into the kitchen with the new sys. OSBuilder builds first based on packages.sof order, and then .dsm order if packages are not found in packages.sof. You are building packages all out of preferred order, which will not achieve desired results. Take a look at the packages.sof from my preconfigured kitchen, or better yet, download my most recent kitchen and just use that.
Also, I see that you are building in both phonecanvas versions. One version is for com2 and com 5 builds, and the other is for com 3 builds, so that will cause you some issues.
In regards to your manila issue, I believe that the kitchen you are working with likely only contains 0409 manila files, because I think that is the one and only build that I used the manila lang sorter on, and stripped all non wwe manila files from the kitchen. I'm talking about lang files in the manila common folders (which contain over 10 different languages by default -- even though these are supposed to be "common" files. The recent version of the kitchen does contain all lang manila files in common, you just need to add your lang pack.
Click to expand...
Click to collapse
Hello sorry that I have not asked directly to you, do not save the post from which to download the kitchen and honestly I downloaded many kitchen for testing. and good that yours was the most use and I started changing from a few things until the end wanted to put it in my native language is Spanish, q is both the modification that the only thing I did was left of your original rom was the xip of 21 887 rom yet and would change the 21 889 that I previously had the stock rom dump.
Ok and will review these issues you mention about the canvas was originally com2 off but I had to activate q 3 for the full-dialer will see that when I was the only COM5 dialer being cut came out but not approach it because I wanted to do first operational as of manila to accommodate those details later.
I would love to hear a lot that kitchen, cooperation could give me the link to download if not much problem.
Thanks for everything.
EDMYJOSE said:
Hello sorry that I have not asked directly to you, do not save the post from which to download the kitchen and honestly I downloaded many kitchen for testing. and good that yours was the most use and I started changing from a few things until the end wanted to put it in my native language is Spanish, q is both the modification that the only thing I did was left of your original rom was the xip of 21 887 rom yet and would change the 21 889 that I previously had the stock rom dump.
Ok and will review these issues you mention about the canvas was originally com2 off but I had to activate q 3 for the full-dialer will see that when I was the only COM5 dialer being cut came out but not approach it because I wanted to do first operational as of manila to accommodate those details later.
I would love to hear a lot that kitchen, cooperation could give me the link to download if not much problem.
Thanks for everything.
Click to expand...
Click to collapse
http://www.mobileunderground.info/showthread.php?t=12797