I just got a HTC Magician, and i don't know how to connect to wireless networks or how to search for them, can someone post a step by step guide please? or if the same question was previously asked please tell me where i searched for more then an hour.
Thanks
If you mean WIFI, you can`t. Magician does not have WIFI capabilities.
Some SD-Wifi adapters are supposed to work, but I don`t know the details.
i have been told that i can connect to wireless internet with it
Maybe Wireless internet via the gsm network (as in mobile internet)... no WiFi here.
http://pdadb.net/index.php?m=specs&id=134&c=o2_xda_ii_mini_htc_magician
there are also other options as in internet through bluetooth (and activesync) but Wifi is a big no go unless you have a Wifi SDIO card.
i understand thanks for the informations
the magician doesn't have a WIFI(GPS) installed. So you can do what you want, but it will never connect to WIFI.
supersaiyan said:
the magician doesn't have a WIFI(GPS) installed. So you can do what you want, but it will never connect to WIFI.
Click to expand...
Click to collapse
WIFI=/=GPS
don't know why you wrote "WIFI(GPS)"
Only 2G wireless connections and USB or BT tethering internet..
Related
hi guys,
i just bought an XDA II mini, and i heard there are a lot of problems with wireless lan, so im confused, can i use the sandsick wifi card with that phone and access the internet ? does it work well or do i have to trick somethign ? and what kind of card does work ? thank you for the help.
should be possible of cause you need something to connect to
so you need a wifi router or have access to a wifi hotspot somewhere
My MDA Compact works perfectly well with the SanDisk Wifi with 256Mb memory. I didn't experience any problems, except setting it up! :lol: But now I know what to do, its perfect.
ah ok, so wifi and wireless lan are the same but ? meaning as long as theres a wireless lan internet hotspot around, i can use it right ?
yep you got it in one.
well if the hotspot let you
if it's a private wifi network then unly if they dident make it secure
and if it public hotspot they may want to charge you for using it
yeah i know that, how bout security keys ? can the card handle 64/128 bit encryption when i know the key ?
looking at sandisks site would give the answer to that question i think
i got the card, and it was installed fine, also fins my wireless network, but i cant sue internet explorer, it always says i have no connection, and under modem settings i cannot choose wireless, only dial in or bluetooth/gprs settings
if you mean surf and not sue
then try choosing the connection
under advanced when you want to suft using wifi
you have to sellect that connection insted of the GPRS which is the std connection picked there
i tried that, but then in the modem settings there is no wifi option to choose, only gprs, bluetooth and a few others
Guys i have searched over 1 hour in the Internet but no solution sorry but still i cant get connected.
If someone please Post Step by step procedures i would be very thankful
here is some useful but not completed websites:
The Best one seems to be this but it is very old:
http://www.microsoft.com/windowsxp/using/networking/expert/bowman_september24.mspx
Result from other Sites:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=453&more=1
http://www.modaco.com/index.php?showtopic=237804
Drop it. No way to do it. I've posted here just a few weeks ago, tried everything, with no luck. It simply isn't possible with the latest ActiveSync 4.1, and the older one 3.8 which has the wifi functionality, is not compatible with WM 5.0.
So forget about it. You can connect through wifi, but no synching...
Thank you very much but what is the benefith to connect through wifi?? i cant even send a file or connect to internet!!! At list give me a clue to conect Internet through WiFi & PC. but i think if we do the right Setting for IP in WiFi we would get connected some how....
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
krale said:
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
Click to expand...
Click to collapse
Resco File Explorer will let you add "share drives" also. You can add directories or drives.
Upss...
It seems that sharing internet connection through wifi is NOT possible with WM5... They have just ruined everything with this stupid upgrade of activesync!
Anyone aware of a work arround so my PC internet connection works on my PPC connected to it with ad-hoc wifi?
as i said i think with IP configuration there might be a way to share it. or i think XDA fellow should program a Stack for this issue on activesyns4.x
Internet over Wi-Fi
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Perhaps you are right Acer, since I was not able to fully test it with your specs.
I have a company cable network LAN, and a wireless adapter on the laptop which is free. But unfortunatelly, I was not able to set up internet sharing of the LAN, since it goes over a Network Bridge. Anyone now how this could be enabled?
THanks for the info Acer, its helpful...
Re: Internet over Wi-Fi
acer175 said:
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Click to expand...
Click to collapse
Dude thanx i have a laptop and i have made an ad-hoc network between my pc and the Prophet, also i have shared my dialup connection but it is not working, if possible would you please explain step by step settings?
do you have Windows XP on your laptop?
acer175 said:
do you have Windows XP on your laptop?
Click to expand...
Click to collapse
yes i am using XP home Edition and my laptop is Averatec 3200 series
Just go to properties on your dial up internet sharing and set share this connection. i thinks thats about it. i've not use it for a long time, but if I remember correctly that's about it. you have to share it with your WI-FI adapter of course.
Some WI-Fi card can configure this automacticly. Like several I seen. You can set it as a router, and you're good to go.
BUMP @ acer175 ..where are you dude??!!!
Hi lover. Sorry, I thought Munyuk81's response was enough.
Anyway, on Windows XP, open Network Connections, right-click on your dial-up/ADSL connection, selet Properties.
Open the Advanced tab, you should have an Internet Connection SHaring section. Enable "Allow other users to connect etc, etc...". Select the wireless network adapter if given the option. Click YES if asked to change the IP.
Next create a wi-fi network using the XP utlities or your card's utilities. Don't touch the IP address of the wi-fi card.
Next on your Prophet, enable Wi-Fi and it should discover the network by itself. If you set a key in the step above, it will ask you to enter it.
@acer175
Do you know how i can share my Lan internet which goes over a Network Bridge? WHen I removed the Lan from the Network Bridge, I could see the options for ICS, but there was no internet to share, as the connection was lost. Adding it back to the network bridge restores the internet connection, but removes the option for sharing it with the other (wifi) card...
Anyone?
i haven't tried it myself, but thinking logically, when you add a connection to a bridge, it loses its individual attributes. You have to check the properties of the bridge, and check if there are ICS options there, however I do not think that XP allows that, but you can try.
ALso see if this may be helpful:
http://www.practicallynetworked.com/sharing/xp_ics/
thanx acer175.
i have connected my PPC to PC but still no internet sharing!! also i have shared some drives and folders in my PC but with resco explorer i cant see any of them
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
acer175 said:
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
Click to expand...
Click to collapse
the file sharing works perfectly (thank you\) but no internet conection when i start IE browser it says : The page cannot be found. check the name and try again ?!!!
what is your settings in
Start.Settings.Connections.ConnectionsAdvanced...Select Networks?
both of them are My Work Network
pleassssse help me ,
i have a laptop with wifi and a DSL internet conection
and i ask
is that possible to access the net (DSL) using my universal
(without using GPRS ) ,via wifi or bluetooth
i mean using my laptop as wireless modem , NOT my universal as modem ,
and thanksssssss
pleaseeeee help
If you're using your laptop on WiFi to access your DSL connection, is there any reason why you don't just use WiFi on your universal?
thanlks for your reply , but my DSL connected via ethernet cable to my laptop ,and my laptop has a wireless lan on it , so can i make my laptop as a wireless modem ?
If you connect the Universal to your laptop it will use the internet connection over the Activesync connection.
:edit: Just reread, but yes you can also set your laptop WiFi connection to Ad Hoc mode to allow WiFi connections to it and use a shared internet connection that way. You better find a HOWTO or something for that though since it is not so straightforward.
dastan said:
pleassssse help me ,
i have a laptop with wifi and a DSL internet conection
and i ask
is that possible to access the net (DSL) using my universal
(without using GPRS ) ,via wifi or bluetooth
i mean using my laptop as wireless modem , NOT my universal as modem ,
and thanksssssss
pleaseeeee help
Click to expand...
Click to collapse
Sure you can - via either a direct, active BT / USB ActiveSync connection OR a Wi-Fi p2p connection or, if you install the Widcomm BT stack, even BT PAN p2p.
Please read my related articles - I've published many articles on all these technologies.
thank u alll
i'll try it and give you my feed back
thanks again
Menneisyys said:
Sure you can - via either a direct, active BT / USB ActiveSync connection OR a Wi-Fi p2p connection or, if you install the Widcomm BT stack, even BT PAN p2p.
Please read my related articles - I've published many articles on all these technologies.
Click to expand...
Click to collapse
thank you
but i cant find your post related to my issue , can you direct me to one of them
i search by your name ,and the result was to much , i cant find anything
thanks again
dastan said:
thank you
but i cant find your post related to my issue , can you direct me to one of them
i search by your name ,and the result was to much , i cant find anything
thanks again
Click to expand...
Click to collapse
See the Wi-Fi / BT p2p links at http://www.pocketpcmag.com/blogs/menneisyys/102005MPPPCGames.asp
thank you veryyyyyyyyyyyyyyyyyyyyyyyyyyyyyy much
i'll try it , thaaaaanks
Is it possible to share my 3G operator connection over my device's WiFi connection, essentially turning my phone into a Wireless Access Point?
This would be a fantastic function, there must be some genius out there who's written a small app to do this.
I'm using a HTC Hermes (TyTn) running Windows Mobile 5.
Waiting in anticipation... Thanks.
As far as I know, it's not possible. You could share it with a notebook or something via USB or bluetooth and then have the notebook act as a wireless AP. Only way I know to do it. Sorry.
This is where I found my solution........
http://www.mobilegadgetnews.com/index.php?showtopic=11455
I just got a Tattoo.. I think new users have always problem.
Somebody help me for the following:
1. I want to access internet at home on my laptop running Windows 7 by TETHERING with my Tattoo GPRS(EDGE). Is that USB connection and selecting 'Mobile Network Sharing'?? But I am still not able to success.
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
thacen said:
I just got a Tattoo.. I think new users have always problem.
Somebody help me for the following:
1. I want to access internet at home on my laptop running Windows 7 by TETHERING with my Tattoo GPRS(EDGE). Is that USB connection and selecting 'Mobile Network Sharing'?? But I am still not able to success.
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
Click to expand...
Click to collapse
Thank you everybody. I resolve my 1st problem. Yes, it is just USB connection and selecting 'Mobile Network Sharing'. My problem was because of not able to install the NDIS driver properly. After resolving the driver problem it is working fine.
But I am still looking for my 2nd problem RETHETING
thacen said:
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
Click to expand...
Click to collapse
I'm not sure if it will work that way... I know with a Windows Mobile device you can, but never tried under Android. Perhaps there is an option somewhere in the HTC Sync program?
There definitely isn't an option in HTC Sync to do this. In fact, I don't know of any way of generically sharing your internet connection over USB. If your work PC has a Wi-Fi card, you could easily share the internet connection over an ad-hoc network.
Edit: In principle, you could also share your internet connection over Bluetooth but I'm pretty sure the Tattoo doesn't support the necessary Bluetooth profile(s) for such connections.
check out this gadget http://usb.brando.com/prod_detail.php?prod_id=00805
Ali 24789 said:
There definitely isn't an option in HTC Sync to do this. In fact, I don't know of any way of generically sharing your internet connection over USB. If your work PC has a Wi-Fi card, you could easily share the internet connection over an ad-hoc network.
Edit: In principle, you could also share your internet connection over Bluetooth but I'm pretty sure the Tattoo doesn't support the necessary Bluetooth profile(s) for such connections.
Click to expand...
Click to collapse
I think Wi-fi ad-hoc connection is for rooted androids only and I don't found any rooted tattoo till date. I tried another option, using Connectify on my Windows 7 laptop and sharing Wi-fi. But still unable to success browsing, eventhough my phone can be connected with my Laptop through this connectify.
Anybody have success browsing it kindly share.
thacen said:
I think Wi-fi ad-hoc connection is for rooted androids only
Click to expand...
Click to collapse
Uh, what? I'm sharing my internet connection over Wi-Fi with my MacBook right now and my Tattoo can connect to it and access the internet just fine.
Edit: You're probably thinking of android-wifi-tether, which lets you share your phone's 3G/2G mobile connection via Wi-Fi or Bluetooth.
Edit2:
MiSSigNNo said:
check out this gadget http://usb.brando.com/prod_detail.php?prod_id=00805
Click to expand...
Click to collapse
That gadget won't help. How is a phone supposed to make use of it?
Ali 24789 said:
Uh, what? I'm sharing my internet connection over Wi-Fi with my MacBook right now and my Tattoo can connect to it and access the internet just fine.
Edit: You're probably thinking of android-wifi-tether, which lets you share your phone's 3G/2G mobile connection via Wi-Fi or Bluetooth.
Edit2:
That gadget won't help. How is a phone supposed to make use of it?
Click to expand...
Click to collapse
If you are talking about tethering, it is OK, I am just satisfied with USB tethering, it is working now, but What I am actually looking for is about RETHETING just converse connection of that tethering. (I know there is no word like RETHETING BUT I don't know what is the right term of just converse connection of tethering.) The problem is, I want to share wired Internet at my working place with my HTC tattoo phone as I have limited GPRS subscription to save some money and to enjoy speed of that wired internet.
I thought running Connectify on my Windows 7 laptop connected to that wired Internet as a Wi-fi hotspot then connected by this android phone (Tattoo) is the right solution.
Yes, it is connected pinging is ok but could not access internet from my Tattoo. May be some firewall problem or something I cannot figure out. If some one have solution it is most welcome.
thacen said:
If you are talking about tethering, it is OK
Click to expand...
Click to collapse
No, I was talking about "retheting"; my MacBook has a wired (ethernet) connection to the internet and is sharing it over Wi-Fi, which my Tattoo can connect to and use.
I did some reading up on Connectify (and was surprised to find that Micro$oft still hasn't quite implemented the feature natively on Windows yet) and it should work. I don't have a Wi-Fi card on my desktop PC so I can't test it myself but perhaps you are having something like a firewall problem.
Ali 24789 said:
No, I was talking about "retheting"; my MacBook has a wired (ethernet) connection to the internet and is sharing it over Wi-Fi, which my Tattoo can connect to and use.
I did some reading up on Connectify (and was surprised to find that Micro$oft still hasn't quite implemented the feature natively on Windows yet) and it should work. I don't have a Wi-Fi card on my desktop PC so I can't test it myself but perhaps you are having something like a firewall problem.
Click to expand...
Click to collapse
I have tried with Connectify and also Virtual Router on my Windows 7 but could not success. I think you are lucky to own a macbook. My Windows 7 is RC so it might be because of that or Tattoo may lack something.
Regarding that android-wifi-tether, it reports as rootted device required and could not help my requirement.
I thought you were talking about an usb internet sharing connections...
If you want to do it via wifi, is pretty easy, since ALL windows have the ad-hoc functionality made by default. Problem is that if you use it with your wifi chipset then you won't be able to conect directly to other wifis if it is your main connect unless you buy another wifi card for this purpose...
in windows 7 you can find this functionality under the connection center... in windows xp is a little bit difficult because you have to configure the adapter into the wifi adapter properties in network connections tabs.
MiSSigNNo said:
I thought you were talking about an usb internet sharing connections...
Click to expand...
Click to collapse
Yes. I actually want that USB internet sharing. But till date no one is seem to success it.. So, while waiting for this solution.. I am just looking for alternative, that sharing through wifi.
If you want to do it via wifi, is pretty easy, since ALL windows have the ad-hoc functionality made by default. Problem is that if you use it with your wifi chipset then you won't be able to conect directly to other wifis if it is your main connect unless you buy another wifi card for this purpose...
in windows 7 you can find this functionality under the connection center... in windows xp is a little bit difficult because you have to configure the adapter into the wifi adapter properties in network connections tabs.
Click to expand...
Click to collapse
I also thought that it should be very easy, and tried all possible means that I know but could not success. One funny thing is, I can get IP address resolved of any URL on my tattoo after wifi connection. It means it can reach DNS server and can resolve IP address but still could not able to browsing. May be some firewall or Antivirus is blocking the browsing on my Windows 7 pc I need to check thoroughly.
If someone have good explanation, it will be very helpful... thanks.
Wifi is working
I was making my laptop complicated by setting 3 static IP networks..as my work place has 3 gateways and I manually change gw when required. I clean it up and set to only one. Now Internet through Wifi of Laptop is OK I am using Connectify on Windows7.
Thx for the patience.
But still waiting for solution on USB "Retheting"