I posted a thread asking for help on cooking for older devices, but no one seemed to have an answer for it. I figured I would give this thing another shot and the device gets past the first screen, but it never gets out of the second boot splash. I have attached the kitchen that I am using with SYS already ported.
Without further ado, here is my attempt to a kitchen (based off on sun_dream's 28230 kitchen)
http://hotfile.com/dl/36427122/da04c1f/HTC_BlueAngel_WM6.5.3_23112.rar.html
Any help will be appreciated!
did you recmod any of the files in sys? or ext? ive never cooked for blue angel but im sure it doesnt have a native 6.5 nk.exe and that means you need to recmod some files for kaiser i always recmodded my whole ext folder, and all modules in browsing, browsingcore, browsingie...give that a try and see if it helps
twopumpchump said:
did you recmod any of the files in sys? or ext? ive never cooked for blue angel but im sure it doesnt have a native 6.5 nk.exe and that means you need to recmod some files for kaiser i always recmodded my whole ext folder, and all modules in browsing, browsingcore, browsingie...give that a try and see if it helps
Click to expand...
Click to collapse
Hey twopump,
I tried recmodding the modules that you described there (which I also saw on another thread that you replied to). As far as the ones in the EXT folder (my kitchen has a OEM folder, which I think is the same), they were all recmodded by sun_dream. BTW, you are absolutely correct about the BA not having a native 6.5 nk.exe.... that is usually the downfall of a 5 year old device , but I know that it can be done since there are newish roms out there for the BA (28230 being one of them).
There is no way you can look at my kitchen and tell me what's wrong is there, is there? (I guess the answer is no, but it is always worth asking).
Thanks for the help.
ok i took a look at your kitchen, and im pretty sure i know whats wrong. the first thing i did was open up your sys folder to check if you had recmodded browsing, browsingie, browsingcore, and you hadnt they all still had the modules in them....except you didnt even have browsingie in your rom only the 0409 pkg lol. then i noticed that you deleted the netcf pkg from sys as well, that will cause your rom not to boot. here is my solution to your problems, start over with a fresh complete sys, only delete the things that arent needed, then convert every module in browsing, browsingcore, browsingie to a file. make sure you have netcf and cook you should have a booting rom
twopumpchump said:
ok i took a look at your kitchen, and im pretty sure i know whats wrong. the first thing i did was open up your sys folder to check if you had recmodded browsing, browsingie, browsingcore, and you hadnt they all still had the modules in them....except you didnt even have browsingie in your rom only the 0409 pkg lol. then i noticed that you deleted the netcf pkg from sys as well, that will cause your rom not to boot. here is my solution to your problems, start over with a fresh complete sys, only delete the things that arent needed, then convert every module in browsing, browsingcore, browsingie to a file. make sure you have netcf and cook you should have a booting rom
Click to expand...
Click to collapse
Thanks for the advice. I honestly cannot put browsingie and netcf at the same time simply because the BA only has 32 mb for rom and the kitchen essentially errors out before getting to the end. The other issue is that the rom will not even boot if I take either one of them out. I did recmod all that you suggested, but still nothing...
egzthunder1 said:
Thanks for the advice. I honestly cannot put browsingie and netcf at the same time simply because the BA only has 32 mb for rom and the kitchen essentially errors out before getting to the end. The other issue is that the rom will not even boot if I take either one of them out. I did recmod all that you suggested, but still nothing...
Click to expand...
Click to collapse
can I be of some help?if I get u correctly u want to cook a rom OS 23112 for blue angel.right ?if so must one use the kitchen u have posted?or any kitchen ?
regards
deepankerjha said:
can I be of some help?if I get u correctly u want to cook a rom OS 23112 for blue angel.right ?if so must one use the kitchen u have posted?or any kitchen ?
regards
Click to expand...
Click to collapse
I would appreciate all the help that I can get . The kitchen that I posted is a modified version of a 28230 kitchen by sun_dream. Basically, I ported the XIP and the SYS folders from 23112 into the 28230 kitchen. Originally, I had included the same exact components in the SYS that sun_dream had included in his kitchen (his is fully functional btw), so I am at the point where I am running out of ideas on what I could be doing wrong. I know that you cook for the Nike, so the way of cooking will be completely different, but some of the core knowledge is still the same. Any suggestions are welcome
egzthunder1 said:
I would appreciate all the help that I can get . The kitchen that I posted is a modified version of a 28230 kitchen by sun_dream. Basically, I ported the XIP and the SYS folders from 23112 into the 28230 kitchen. Originally, I had included the same exact components in the SYS that sun_dream had included in his kitchen (his is fully functional btw), so I am at the point where I am running out of ideas on what I could be doing wrong. I know that you cook for the Nike, so the way of cooking will be completely different, but some of the core knowledge is still the same. Any suggestions are welcome
Click to expand...
Click to collapse
well mate we can ddo two things. I can give u my sys/common folder of 23112 and u can try that .i have cooked with 23112 for nike and neon both.
2nd u will have to provide me the stock rom so that I can give a try using my kitchen to cook for u .
btw which kitchen is posted in ur link
regards
deepankerjha said:
well mate we can ddo two things. I can give u my sys/common folder of 23112 and u can try that .i have cooked with 23112 for nike and neon both.
2nd u will have to provide me the stock rom so that I can give a try using my kitchen to cook for u .
btw which kitchen is posted in ur link
regards
Click to expand...
Click to collapse
Original kitchen by sun_dream here
My modified kitchen is the one posted above
Link for the stock rom can be found here
I will certainly appreciate any help I can get
egzthunder1 said:
Original kitchen by sun_dream here
My modified kitchen is the one posted above
Link for the stock rom can be found here[/ucouldn'trl]
I will certainly appreciate any help I can get
Click to expand...
Click to collapse
sorry,u didn't get me,or I couldnt put right words.is that evk kitchen or some other.2ndly would u like to try my sys 23112 ?
deepankerjha said:
sorry,u didn't get me,or I couldnt put right words.is that evk kitchen or some other.2ndly would u like to try my sys 23112 ?
Click to expand...
Click to collapse
No, these are "old style kitchens" I am pretty sure that EVK will not work with these kind of roms (they are of the nbf type and not nbh). If you would like to send me your SYS, I would not mind taking it for a spin.
egzthunder1 said:
No, these are "old style kitchens" I am pretty sure that EVK will not work with these kind of roms (they are of the nbf type and not nbh). If you would like to send me your SYS, I would not mind taking it for a spin.
Click to expand...
Click to collapse
ok I will upload the common folder for u once I am home,say within an hr
deepankerjha said:
ok I will upload the common folder for u once I am home,say within an hr
Click to expand...
Click to collapse
Thank you. I will post my findings after I test it.
egzthunder1 said:
Thank you. I will post my findings after I test it.
Click to expand...
Click to collapse
sorry for being late 23112
I would give atry to Recmod all EXT packages as TPC said.
Your FWUPDATE and SQM in sys folder are dummy or M$ originals?
You need absolutly Net and Browsingie as TPC said ,at least delete some useless apps in OEM packages.
I made a 23112 SYS within only the needed and already recmoded plus the dummy fwupdate and sqm, you must put them in an EXT folder or convert them in OEM.
http://www.4shared.com/file/7miAPvVw/SYS_XIP_DUMMY_23112.html
af974 said:
I would give atry to Recmod all EXT packages as TPC said.
Your FWUPDATE and SQM in sys folder are dummy or M$ originals?
You need absolutly Net and Browsingie as TPC said ,at least delete some useless apps in OEM packages.
I made a 23112 SYS within only the needed and already recmoded plus the dummy fwupdate and sqm, you must put them in an EXT folder or convert them in OEM.
http://www.4shared.com/file/7miAPvVw/SYS_XIP_DUMMY_23112.html
Click to expand...
Click to collapse
I believe I have the real FW and SQM folders in there. It is truly weird though, if you take a look at the original sys folder of the 28230 kitchen, sun_dream has no netcf nor browsingie in there, and he has no recmodded files in the browsing folders either, yet his kitchen spits out a working rom...
At this point, I am beginning to think that my xip might be bad...
egzthunder1 said:
I believe I have the real FW and SQM folders in there. It is truly weird though, if you take a look at the original sys folder of the 28230 kitchen, sun_dream has no netcf nor browsingie in there, and he has no recmodded files in the browsing folders either, yet his kitchen spits out a working rom...
At this point, I am beginning to think that my xip might be bad...
Click to expand...
Click to collapse
You dont need netcf to build a ROM. Ofcourse most of our programs these days wont run unless you install it after...
I do agree that it doesnt make sense...
ai6908 said:
You dont need netcf to build a ROM. Ofcourse most of our programs these days wont run unless you install it after...
I do agree that it doesnt make sense...
Click to expand...
Click to collapse
NetCF can be installed post flash either by hand or some customization method (sdcustomization, uc, sashimi, etc)
Let me go a little deeper into the world of the BA. The process is pretty much the same as it is with all devices... flash a rom, hard reset, and reboot. Depending on the packages that I am adding to the SYS, the rom will either get stuck while hard resetting (which is the same as getting stuck in the tri-colored screen (keep in mind that for the BA, the tri-colored screen is *not* bootloader, but the first bootsplash)), or will go through the first screen and get stuck in the second bootsplash (here is the kicker, if you connect the device to a computer, Activesync will see it and try to connect, which means that some of the windows OS components are loading...)
I am finishing charging up my BA and I will flash deep's SYS and will let you all know what comes out of it
If I look in your common folder I see Chome is still in, that's a huge memory eater, not sure what you are cooking and if you need it.
Another thing; if I take out NETCF in my rom device setup starts looping in a continue circle and I get a warning about AutoVer.exe.
I hope this is of any help.
egzthunder1 said:
NetCF can be installed post flash either by hand or some customization method (sdcustomization, uc, sashimi, etc)
Let me go a little deeper into the world of the BA. The process is pretty much the same as it is with all devices... flash a rom, hard reset, and reboot. Depending on the packages that I am adding to the SYS, the rom will either get stuck while hard resetting (which is the same as getting stuck in the tri-colored screen (keep in mind that for the BA, the tri-colored screen is *not* bootloader, but the first bootsplash)), or will go through the first screen and get stuck in the second bootsplash (here is the kicker, if you connect the device to a computer, Activesync will see it and try to connect, which means that some of the windows OS components are loading...)
I am finishing charging up my BA and I will flash deep's SYS and will let you all know what comes out of it
Click to expand...
Click to collapse
deepankerjha said:
sorry for being late 23112
Click to expand...
Click to collapse
Thanks... I tried it but no dice I ran out of space (the BA only has 32 MB available for the ROM)
hello
I Have This issue When cook any rom:
I can't play any video When build the rom in any kitchen
it skips mp3s fast and videos too
I've cooked mediaOs
builds Using :
23566
23529 was working but now not
21898 was working but now not
23648 was working
23651 was working
23568
cheers and thanks in advance
edit: changed this topic because it's my fault
magawa said:
hello
I've moved to ervius kitchen because it better than Vistang kitchen
My friend port it to work with omnia and it works
roms boot without any problems BUT, see down \/ ...
This Is My Problem :
Some times , some app are corrupted and some times Microsoft app are corrupted.
in Vistang kitchen rom work and all apps are worked when I built the Rom
any body have any idea why some files are corrupted (when using ervius kitchen) in the rom but in fact they are working .
sorry , But I like ervius ( easy , simple and very fast )
builds Using in the ervius kitchen :
23566
23529
21898
23648
23651
cheers and thanks in advance
Click to expand...
Click to collapse
can u please tell me the setup for vistang kitchen??
i want to use it..
What setup ?
ahh I understand know see here http://www.modaco.com/content/i900-general-omnia-rom-discussion/295395/visual-kitchen-by-vistang/
you will find update in page 28 I think
I dont know how Vistang kitchen works but maybe the modules are corrupted for EVK like... No S000 file or bin or DSM or other issues... you must to tell us wich pkgs for wich apps dont works... what the issue in that apps and please if you can pack those apps and attach them we can see whats wrong maybe its just the PKG path not set right to the kitchen
+ Que PPC said:
I dont know how Vistang kitchen works but maybe the modules are corrupted for EVK like... No S000 file or bin or DSM or other issues... you must to tell us wich pkgs for wich apps dont works... what the issue in that apps and please if you can pack those apps and attach them we can see whats wrong maybe its just the PKG path not set right to the kitchen
Click to expand...
Click to collapse
thanks for replay
the corrupted packages are random some sometimes all the rom not working and sometimes all app and sys are working
I don't like to build the rom 5-6 times to get it working 100%
cheers
magawa said:
thanks for replay
the corrupted packages are random some sometimes all the rom not working and sometimes all app and sys are working
I don't like to build the rom 5-6 times to get it working 100%
cheers
Click to expand...
Click to collapse
hey dear have u ever read this fixes
http://forum.xda-developers.com/showthread.php?t=564130
saurabh88 said:
hey dear have u ever read this fixes
http://forum.xda-developers.com/showthread.php?t=564130
Click to expand...
Click to collapse
YES .... Oh from long time
I didn't fully read it
thanks for reply
No Body Can help ................
What About playing videos issue ??
I really Want To solve this problem
BTW: Ive Solve ervius kitchen issue by removing all sys's , packages.txt , Not needed EXT packages , and move it to C:
i have imported the stock Rom both through oskitchen and evk....
but i canNOT FIND the autorun file which is resposible for customisation after rom flashing:as i want to move to xda uc i have to remove this...
but my problem is where is that file?
i searched whole kitchen...
or is it another file which isresponsible?
FINALLY I GOT BOTH AUTORUN AND runcc
my question is i have read whole noonsk thread about cooking xda_uc..but i m not still getting it in my mind..hehas updated it to v2.1 but the packages contain three folders and i really dont know whic to included or whole packages??
plz those rom chef who have used this method help neede as i have tried so many times but no success
check all oemoperators pkgs and the runcc pkg
+ Que PPC said:
check all oemoperators pkgs and the runcc pkg
Click to expand...
Click to collapse
done but no success..
anyone know here how to remove uldr partition in oskitchen for diamond?
saurabh88 said:
done but no success..
anyone know here how to remove uldr partition in oskitchen for diamond?
Click to expand...
Click to collapse
osKitchen 1.25 removes uldr partition
will anyone please explain how to use xda uc for cooking
i think people arecso busy to explain?
Hey All, Im new to cooking ROMs and am trying to make one for TP2 Rhodium US.
Initially I was having issues with .netCF but that is fixed.
Now when I am flashing my ROM, I get no errors, but the HTC sense and Titanium interfaces wont load.
I can open the start menu and see about half of the things i installed, and half missing.
Any ideas?
Im using 23128 Sys and Ext files, Manila 2016, with the official HTC OEM 21887 base.
Sounds like you dont have netcf in the ROM!!
ai6908 said:
Sounds like you dont have netcf in the ROM!!
Click to expand...
Click to collapse
I just did a search, it is located in my Sys>23128>Shared>COMMON folder
I have added many files that I had previously removed to save space, and now I am getting this error when trying to create the build
"692 Modules present; Too many modules.... with 6.1 NK.exe and 6.5 XIP you' ll have non-bootable ROM.... Exiting..."
EDIT: I am now trying to recreate it in osKitchen Zero, and I see that I have SYS Build 21887, but i also have the 23128 file, could this be what is causing issues?
I have one zip file that has 23128 ZIP and SYS folders, and one that has 23128 Shared, MSXIPKernel and 0409... Do i just replace these over the 21887 files?
You need to check that box it says real wm6.5 kernel I think. Its been so long since I used EVK, I forgot what it says exactly.
ai6908 said:
You need to check that box it says real wm6.5 kernel I think. Its been so long since I used EVK, I forgot what it says exactly.
Click to expand...
Click to collapse
Okay, it looks like it is going now, if it doesnt work this time Im guessing maybe im not using the newer 23128 files and folders in the correct place?
Post Deleted
Post Deleted
Does anyone know how aligned the Wi-Fi wizard during the initial setup (OOBE).
Oem 2.13
Rom 2.13
Ext 2.13
Sys 23563 (6.5.5)
Wi-FiWizard_1_45_0_0 (huashan_1.13)
Thanks man, I have replaced two packets. Wi-FiWizard_1_45_2_0 and CMWifiAdvanced_1_0_5_0 (Advanced menu fixed), and it works perfectly now.
Braakie said:
Thanks man, I have replaced two packets. Wi-FiWizard_1_45_2_0 and CMWifiAdvanced_1_0_5_0 (Advanced menu fixed), and it works perfectly now.
Click to expand...
Click to collapse
Is it possible to upload those packages? Tried to replace but nothing works
Thanks
lcd4linux
I'll second that but a couple of questions as well...
In the 3.14 Leo dump there isn't a equivalent 'CMWifiAdvanced_1_0_5_0' package so what does this do? Is it something extra that is added by the 'Wi-FiWizard_1_45_2_0' package? Also I only have 0804 language files from the Huashan, have these been translated to 0409?
Thanks, Andy
lcd4linux said:
Is it possible to upload those packages? Tried to replace but nothing works
Thanks
lcd4linux
Click to expand...
Click to collapse
simply use leo packages and add the following files to 6.5.3 roms:
wifi wizard fix leo.zip
package contains wifinetwork.exe from oboe and two graphics reworked by me to hide progressbar from oboe.
Thanks, after using the provided package it is a bit better, easier to hit "NEXT"
Btw i'm on WM6.5 COM2, maybe this is the prob.
lcd4linux
lcd4linux said:
Thanks, after using the provided package it is a bit better, easier to hit "NEXT"
Btw i'm on WM6.5 COM2, maybe this is the prob.
Click to expand...
Click to collapse
yeah. if you use a com2 build there is no need to fix at all.
ultrashot made position fix for native leo 2.13 wifi wizard (v1.24.2.1).
WiFiNetwork leo 2.13 v1.24.2.1 positionfix by ultrashot.zip
wifi wizard from 3.14.405.2 (v1.24.3.3) has some more position related things.
maybe he will provide a fix for this version too. i asked him already.
thanks alot to ultrashot. enjoy