Related
I posted a thread asking for help on cooking for older devices, but no one seemed to have an answer for it. I figured I would give this thing another shot and the device gets past the first screen, but it never gets out of the second boot splash. I have attached the kitchen that I am using with SYS already ported.
Without further ado, here is my attempt to a kitchen (based off on sun_dream's 28230 kitchen)
http://hotfile.com/dl/36427122/da04c1f/HTC_BlueAngel_WM6.5.3_23112.rar.html
Any help will be appreciated!
did you recmod any of the files in sys? or ext? ive never cooked for blue angel but im sure it doesnt have a native 6.5 nk.exe and that means you need to recmod some files for kaiser i always recmodded my whole ext folder, and all modules in browsing, browsingcore, browsingie...give that a try and see if it helps
twopumpchump said:
did you recmod any of the files in sys? or ext? ive never cooked for blue angel but im sure it doesnt have a native 6.5 nk.exe and that means you need to recmod some files for kaiser i always recmodded my whole ext folder, and all modules in browsing, browsingcore, browsingie...give that a try and see if it helps
Click to expand...
Click to collapse
Hey twopump,
I tried recmodding the modules that you described there (which I also saw on another thread that you replied to). As far as the ones in the EXT folder (my kitchen has a OEM folder, which I think is the same), they were all recmodded by sun_dream. BTW, you are absolutely correct about the BA not having a native 6.5 nk.exe.... that is usually the downfall of a 5 year old device , but I know that it can be done since there are newish roms out there for the BA (28230 being one of them).
There is no way you can look at my kitchen and tell me what's wrong is there, is there? (I guess the answer is no, but it is always worth asking).
Thanks for the help.
ok i took a look at your kitchen, and im pretty sure i know whats wrong. the first thing i did was open up your sys folder to check if you had recmodded browsing, browsingie, browsingcore, and you hadnt they all still had the modules in them....except you didnt even have browsingie in your rom only the 0409 pkg lol. then i noticed that you deleted the netcf pkg from sys as well, that will cause your rom not to boot. here is my solution to your problems, start over with a fresh complete sys, only delete the things that arent needed, then convert every module in browsing, browsingcore, browsingie to a file. make sure you have netcf and cook you should have a booting rom
twopumpchump said:
ok i took a look at your kitchen, and im pretty sure i know whats wrong. the first thing i did was open up your sys folder to check if you had recmodded browsing, browsingie, browsingcore, and you hadnt they all still had the modules in them....except you didnt even have browsingie in your rom only the 0409 pkg lol. then i noticed that you deleted the netcf pkg from sys as well, that will cause your rom not to boot. here is my solution to your problems, start over with a fresh complete sys, only delete the things that arent needed, then convert every module in browsing, browsingcore, browsingie to a file. make sure you have netcf and cook you should have a booting rom
Click to expand...
Click to collapse
Thanks for the advice. I honestly cannot put browsingie and netcf at the same time simply because the BA only has 32 mb for rom and the kitchen essentially errors out before getting to the end. The other issue is that the rom will not even boot if I take either one of them out. I did recmod all that you suggested, but still nothing...
egzthunder1 said:
Thanks for the advice. I honestly cannot put browsingie and netcf at the same time simply because the BA only has 32 mb for rom and the kitchen essentially errors out before getting to the end. The other issue is that the rom will not even boot if I take either one of them out. I did recmod all that you suggested, but still nothing...
Click to expand...
Click to collapse
can I be of some help?if I get u correctly u want to cook a rom OS 23112 for blue angel.right ?if so must one use the kitchen u have posted?or any kitchen ?
regards
deepankerjha said:
can I be of some help?if I get u correctly u want to cook a rom OS 23112 for blue angel.right ?if so must one use the kitchen u have posted?or any kitchen ?
regards
Click to expand...
Click to collapse
I would appreciate all the help that I can get . The kitchen that I posted is a modified version of a 28230 kitchen by sun_dream. Basically, I ported the XIP and the SYS folders from 23112 into the 28230 kitchen. Originally, I had included the same exact components in the SYS that sun_dream had included in his kitchen (his is fully functional btw), so I am at the point where I am running out of ideas on what I could be doing wrong. I know that you cook for the Nike, so the way of cooking will be completely different, but some of the core knowledge is still the same. Any suggestions are welcome
egzthunder1 said:
I would appreciate all the help that I can get . The kitchen that I posted is a modified version of a 28230 kitchen by sun_dream. Basically, I ported the XIP and the SYS folders from 23112 into the 28230 kitchen. Originally, I had included the same exact components in the SYS that sun_dream had included in his kitchen (his is fully functional btw), so I am at the point where I am running out of ideas on what I could be doing wrong. I know that you cook for the Nike, so the way of cooking will be completely different, but some of the core knowledge is still the same. Any suggestions are welcome
Click to expand...
Click to collapse
well mate we can ddo two things. I can give u my sys/common folder of 23112 and u can try that .i have cooked with 23112 for nike and neon both.
2nd u will have to provide me the stock rom so that I can give a try using my kitchen to cook for u .
btw which kitchen is posted in ur link
regards
deepankerjha said:
well mate we can ddo two things. I can give u my sys/common folder of 23112 and u can try that .i have cooked with 23112 for nike and neon both.
2nd u will have to provide me the stock rom so that I can give a try using my kitchen to cook for u .
btw which kitchen is posted in ur link
regards
Click to expand...
Click to collapse
Original kitchen by sun_dream here
My modified kitchen is the one posted above
Link for the stock rom can be found here
I will certainly appreciate any help I can get
egzthunder1 said:
Original kitchen by sun_dream here
My modified kitchen is the one posted above
Link for the stock rom can be found here[/ucouldn'trl]
I will certainly appreciate any help I can get
Click to expand...
Click to collapse
sorry,u didn't get me,or I couldnt put right words.is that evk kitchen or some other.2ndly would u like to try my sys 23112 ?
deepankerjha said:
sorry,u didn't get me,or I couldnt put right words.is that evk kitchen or some other.2ndly would u like to try my sys 23112 ?
Click to expand...
Click to collapse
No, these are "old style kitchens" I am pretty sure that EVK will not work with these kind of roms (they are of the nbf type and not nbh). If you would like to send me your SYS, I would not mind taking it for a spin.
egzthunder1 said:
No, these are "old style kitchens" I am pretty sure that EVK will not work with these kind of roms (they are of the nbf type and not nbh). If you would like to send me your SYS, I would not mind taking it for a spin.
Click to expand...
Click to collapse
ok I will upload the common folder for u once I am home,say within an hr
deepankerjha said:
ok I will upload the common folder for u once I am home,say within an hr
Click to expand...
Click to collapse
Thank you. I will post my findings after I test it.
egzthunder1 said:
Thank you. I will post my findings after I test it.
Click to expand...
Click to collapse
sorry for being late 23112
I would give atry to Recmod all EXT packages as TPC said.
Your FWUPDATE and SQM in sys folder are dummy or M$ originals?
You need absolutly Net and Browsingie as TPC said ,at least delete some useless apps in OEM packages.
I made a 23112 SYS within only the needed and already recmoded plus the dummy fwupdate and sqm, you must put them in an EXT folder or convert them in OEM.
http://www.4shared.com/file/7miAPvVw/SYS_XIP_DUMMY_23112.html
af974 said:
I would give atry to Recmod all EXT packages as TPC said.
Your FWUPDATE and SQM in sys folder are dummy or M$ originals?
You need absolutly Net and Browsingie as TPC said ,at least delete some useless apps in OEM packages.
I made a 23112 SYS within only the needed and already recmoded plus the dummy fwupdate and sqm, you must put them in an EXT folder or convert them in OEM.
http://www.4shared.com/file/7miAPvVw/SYS_XIP_DUMMY_23112.html
Click to expand...
Click to collapse
I believe I have the real FW and SQM folders in there. It is truly weird though, if you take a look at the original sys folder of the 28230 kitchen, sun_dream has no netcf nor browsingie in there, and he has no recmodded files in the browsing folders either, yet his kitchen spits out a working rom...
At this point, I am beginning to think that my xip might be bad...
egzthunder1 said:
I believe I have the real FW and SQM folders in there. It is truly weird though, if you take a look at the original sys folder of the 28230 kitchen, sun_dream has no netcf nor browsingie in there, and he has no recmodded files in the browsing folders either, yet his kitchen spits out a working rom...
At this point, I am beginning to think that my xip might be bad...
Click to expand...
Click to collapse
You dont need netcf to build a ROM. Ofcourse most of our programs these days wont run unless you install it after...
I do agree that it doesnt make sense...
ai6908 said:
You dont need netcf to build a ROM. Ofcourse most of our programs these days wont run unless you install it after...
I do agree that it doesnt make sense...
Click to expand...
Click to collapse
NetCF can be installed post flash either by hand or some customization method (sdcustomization, uc, sashimi, etc)
Let me go a little deeper into the world of the BA. The process is pretty much the same as it is with all devices... flash a rom, hard reset, and reboot. Depending on the packages that I am adding to the SYS, the rom will either get stuck while hard resetting (which is the same as getting stuck in the tri-colored screen (keep in mind that for the BA, the tri-colored screen is *not* bootloader, but the first bootsplash)), or will go through the first screen and get stuck in the second bootsplash (here is the kicker, if you connect the device to a computer, Activesync will see it and try to connect, which means that some of the windows OS components are loading...)
I am finishing charging up my BA and I will flash deep's SYS and will let you all know what comes out of it
If I look in your common folder I see Chome is still in, that's a huge memory eater, not sure what you are cooking and if you need it.
Another thing; if I take out NETCF in my rom device setup starts looping in a continue circle and I get a warning about AutoVer.exe.
I hope this is of any help.
egzthunder1 said:
NetCF can be installed post flash either by hand or some customization method (sdcustomization, uc, sashimi, etc)
Let me go a little deeper into the world of the BA. The process is pretty much the same as it is with all devices... flash a rom, hard reset, and reboot. Depending on the packages that I am adding to the SYS, the rom will either get stuck while hard resetting (which is the same as getting stuck in the tri-colored screen (keep in mind that for the BA, the tri-colored screen is *not* bootloader, but the first bootsplash)), or will go through the first screen and get stuck in the second bootsplash (here is the kicker, if you connect the device to a computer, Activesync will see it and try to connect, which means that some of the windows OS components are loading...)
I am finishing charging up my BA and I will flash deep's SYS and will let you all know what comes out of it
Click to expand...
Click to collapse
deepankerjha said:
sorry for being late 23112
Click to expand...
Click to collapse
Thanks... I tried it but no dice I ran out of space (the BA only has 32 MB available for the ROM)
Here is a very very n0000000000000000b question for Chef Central, sorry if I annoy the masters .
I have Installed EVK 1.8.2 as well as osKithcen 1.25 and also dumped HTC Asia ROM (official) for my Touch2 T3320 its 21854 Build.
Now I want to make a ROM with a new build, so I have downloaded
SYS_23638_XIP.rar
SYS_23638_Common.rar
SYS_23638_96DPI_0409.rar
Click to expand...
Click to collapse
After unzipping the files, how should I incorporate them into my ROM using EVK (or osKitchen).
P.S. Please do not go by my number of posts, most of them were used in appreciating the great work from chefs of Vox & Gene.
Help please
well...
this is not for gene or vogue or whatever... is for hermes but as an examnple to know wich pkgs goes where?? you can take a look in this pictures of this tutorial hope it can helps you the info is kinda old thats why I told you just see the pics...
http://forum.xda-developers.com/showthread.php?t=533423
And i know its not your languaje but take a look at this videos you will se the estructure perfectly for the EVK
part 1 http://www.youtube.com/user/moonspell83?feature=mhw5#p/u/12/wt5rdOrQ9_Y
part 2 http://www.youtube.com/user/moonspell83?feature=mhw5#p/u/11/724u0LKhvfo
part 3 http://www.youtube.com/user/moonspell83?feature=mhw5#p/u/10/j7FeQ7YFgP4
part 4 http://www.youtube.com/user/moonspell83?feature=mhw5#p/u/9/5uYye3uShSM
Any questions.. here please
+ Que PPC said:
well...
this is not for gene or vogue or whatever.......
Click to expand...
Click to collapse
Thanks a lot! You are really really very helpful .
Will have a look.... and bug you again
Yes no prob thats why i made that tutorials but because my english spoken is toooooo baaaaad i just do the videos in my native spanish lang
Where to find newer sys builds? I downloaded one from htcpedia, but its .dio file. Don't know what do do with it
EDIT:
Found it in Da_G's thread, just need to start from the last page .
here in the same sub forum http://forum.xda-developers.com/showthread.php?t=650783
ceesheim said:
here in the same sub forum http://forum.xda-developers.com/showthread.php?t=650783
Click to expand...
Click to collapse
I guess they are not compatible with OSKitchen, I tried one of them using Import Sys option, and it said that it is not a valid dump to parse.
Any idea ?
OsKitchen? are you in oskitchen or ervius?
.dio file needs to be dumped with Xidump tool search there on the Da_G thread there are so many tools to dump .dio files
Addicted2xda said:
I guess they are not compatible with OSKitchen, I tried one of them using Import Sys option, and it said that it is not a valid dump to parse.
Any idea ?
Click to expand...
Click to collapse
i think the OS kitchen import build feature is designed for the "rollup" builds...all pkgs inside a single folder. the ones you tried are divided into language, dpi, ect for ervius visual kitchen. all you have to do is open each of those folders and copy/paste all of them into one single folder, then run the import on OS kitchen i think it should work.
Are you in Erivius Kitchen or OS Kitchen
Click to expand...
Click to collapse
Well I have downloaded both, since I am new to this stuff.. want to check out both. And will ultimately adapt to the one which I am more comfortable with (i.e. get more help on )
Now I have downloaded these three files
21898_Rollup_All_Packages.7z
21898_XIP.BIN_MSXIPKernel_SYS_QVGA_WQVGA_VGA_WVGA_0409_041D_0414.7z
21898_XIP.BIN_MSXIPKernel_SYS_QVGA_WQVGA_VGA_WVGA_0409_0419.7z
Click to expand...
Click to collapse
from Da_G's thread
Now here is what I did:
1. Unzipped all the files in a single folder named 21898 , it had two folders SYS and XIP.
2. Copied the SYS folder under EVK and renamed it to 21898.
3. Copied the content of the XIP folder to "C:\Ervius\Tools\xip.bin_new"
Now the problem is when I am trying to cook a ROM with this (Oh that kitchen is based on WM 6.5 Stock ROM (WWE ASIA) for Mega, it stops saying that I am using 6.1 NK.exe with 6.5 XIP and since the number of modules are too many, it will make an unbootable ROM. But I guess WM 6.5 have 6.5 nk.exe?
Where did I do wrong?
EDIT:
Even after deleting the existing kitchen and re dumping the stock wwe asia ROM, it is still saying that nk.exe is of 6.1!
Addicted2xda said:
Are you in Erivius Kitchen or OS Kitchen
Well I have downloaded both, since I am new to this stuff.. want to check out both. And will ultimately adapt to the one which I am more comfortable with (i.e. get more help on )
Now I have downloaded these three files
from http://forum.xda-developers.com/report.php?p=6017583
Now here is what I did:
1. Unzipped all the files in a single folder named 21898 , it had two folders SYS and XIP.
2. Copied the SYS folder under EVK and renamed it to 21898.
3. Copied the content of the XIP folder to "C:\Ervius\Tools\xip.bin_new"
Noup...
1.- Unzipped all files and put them togheter is just for oskitchen import sys feature... if you want it in EVK style you must to use the packer.jar... is floating arround is friendly to use and easy.
you dont need to modify nothing in Tools folder... dont touch it
From the pkgs you extract you just need to msxipkernel folder... that must be in C:\Ervius\ROM\shared\21898\
Click to expand...
Click to collapse
Now the problem is when I am trying to cook a ROM with this (Oh that kitchen is based on WM 6.5 Stock ROM (WWE ASIA) for Mega, it stops saying that I am using 6.1 NK.exe with 6.5 XIP and since the number of modules are too many, it will make an unbootable ROM. But I guess WM 6.5 have 6.5 nk.exe?
Where did I do wrong?
Click to expand...
Click to collapse
What is your device??? does it has native kernel 6.5???
tell us more about your device and if you can... upload your current EVK to give it a shot
Click to expand...
Click to collapse
Click to expand...
Click to collapse
+ Que PPC said:
Addicted2xda said:
Are you in Erivius Kitchen or OS Kitchen
What is your device??? does it has native kernel 6.5???
tell us more about your device and if you can... upload your current EVK to give it a shot
Click to expand...
Click to collapse
I have Touch2/ Mega T3320 (Not T3333), which have native 6.5 Kernel (it came preloaded with 6.5). The problem is I am constantly travelling ... So I have to use GPRS / Edge for surfing and browsing and ...... Bugging . so you can understand - I won't be able to upload the kitchen. Even to download the SYS etc, it takes me around 5-6 hours! But ... what to do??
EDIT:
I have even deleted the Existing EVK folder and redumped the HTC WWE Asia ROM for Touch2 / Mega but still EVK is telling me that nk is of 6.1!
But osKitchen says its 6.5 (which I guess is right)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
mmm in fact you must to say to the kitchen if is or not a 6.5 in OSK... well... in evk you just need to be sure where to put ROM cause i see you dont know how to arrange the XIP in EVK look in the tutorials
+ Que PPC said:
mmm in fact you must to say to the kitchen if is or not a 6.5 in OSK... well... in evk you just need to be sure where to put ROM cause i see you dont know how to arrange the XIP in EVK look in the tutorials
Click to expand...
Click to collapse
Sorry, I am must be appearing to be lazy, but I am not . At the moment I am downloading the videos from Youtube and will check them out ASAP. Also have saved your tutorial and will take a printout to read it properly. Sorry I can not focus on Monitor .
Will study it tomorrow and revert back for clarifications .
Yeah no prob we know that this is just hobbies... we all had real life to attend firstly
+ Que PPC said:
Yeah no prob we know that this is just hobbies... we all had real life to attend firstly
Click to expand...
Click to collapse
But it is becoming an Addiction
welcome to real XDA and late night and prepared to drink so much coffee
Finally finished your great tutorial... but the thing is even with the stock ROM of Mega as base, EVK says that nk.exe 6.1 and not 6.5.
I simply dumped the Stock ROM and recooked it, no changes nothing. BTW I did got the nbhutil.xml with mega settings though...
Is there any other setting that needs to be changed So that EVK recognizes the nk as a native 6.5???
P.S. clicking on the Native check box does have no effect
i guess it isnt another settings the kitchen reads what you have in the nk.exe
wich build is your Original rom?
is 6.5?
+ Que PPC said:
i guess it isnt another settings the kitchen reads what you have in the nk.exe
wich build is your Original rom?
is 6.5?
Click to expand...
Click to collapse
Yeah, its WM 6.5 ROM,
RUU_Mega_hTC_Asia_WWE_1.28.707.3_Radio_Signed_61.41t.25.31_3.48.25.27_Ship
downloaded from http://forum.xda-developers.com/showthread.php?t=578915
???
I am going to give chef'in a try and as I have never done it before I would ask you to be patient with me.
I have the HTC Leo with Radio 2.10.50 and HSPL installed.
Im using oskitchen and so far I have updated a Stock rom to 6.5.5. Nothing difficult there I hear you say ! But hey, its my first working ROM.
Now I have 2 questions that I hope you can help me with.
Q1. When I flashed the ROM to my phone all worked as you would expect apart from the main screen looked like it had dropped down about 10 pixels. Top and bottom bars looked OK but the middle looked wrong (Screen coming if needed)
Q2. Can someone instruct me on how to set the default wallpaper from oskitchen ?
I have an image called HTC_BG.png and I would like to cook it into the ROM as the default wallpaper.
Ive looked on the forums for help with these questions but I am unable to find them.
Any help / links would be helpfull
Once I have this info, I will proceed to cook my ROM and eventually post the results on the forums along with a complete tutorial as I go along, for those who are looking for similar info.
I have any problems with the buttons and the prefrence folders.
I have create a clip how can you see this problem.
h**p://youtube.com/watch?v=qmDQOzCIWu8
I hope i exist a fix, or what are the right kitchen for the Leo??
BoTTeR1337 said:
I have any problems with the buttons and the prefrence folders.
I have create a clip how can you see this problem.
h**p://youtube.com/watch?v=qmDQOzCIWu8
I hope i exist a fix, or what are the right kitchen for the Leo??
Click to expand...
Click to collapse
From what I know dumping and rebuilding a Leo ROM works correctly on both oskitchen 1.30v3 and 1.31beta3 so you probably changed something that broke that stuff. Always try if a clean dumped ROM rebuilds fine before doing changes that may break it.
Okay... I think im not so Stupid to do this.
I go this way:
1. I Install (extract) OS Kitchen on a folder into my Harddrive (C:/OS)
2. Then i Load the original Rom, extract this to get the RUU_Signed_0407.nbh
3.I Start OSKitchen and klick on Import-> Import a new ROM file.
4. I Select my Model, HTC Leo (HD2) and type the pfad of the RUU_Signed_0407.nbh and go to next (Waiting a minute)
5. I klick on start bulding, and os kitchen go throte without errors..
I Flash the Rom...
And the Taps didn't work. I Have a Windows XP OS and the OS Kitchen Version is 1.31.alpha4
BoTTeR1337 said:
Okay... I think im not so Stupid to do this.
I go this way:
1. I Install (extract) OS Kitchen on a folder into my Harddrive (C:/OS)
2. Then i Load the original Rom, extract this to get the RUU_Signed_0407.nbh
3.I Start OSKitchen and klick on Import-> Import a new ROM file.
4. I Select my Model, HTC Leo (HD2) and type the pfad of the RUU_Signed_0407.nbh and go to next (Waiting a minute)
5. I klick on start bulding, and os kitchen go throte without errors..
I Flash the Rom...
And the Taps didn't work. I Have a Windows XP OS and the OS Kitchen Version is 1.31.alpha4
Click to expand...
Click to collapse
Update to 1.31beta3 because anything before the beta1 had issues with HD2
like Shaddex I am looking into creating ROM's from scratch (for HD2 Leo also!), first for personally use and maybe for general if I can get a ROM to look nice.
My question is, is there a kitchen which work's best for the HD2? Or are all basically generic and just "cook" in different ways?
Sorry to hijack your post Shaddex I hope you get an answer soon, wish I could help
And back on topic
Ok. I extracted Oskitch again, added "RUU_Leo_HKCSL_WWE_1.72.831.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship"
as the base ROM.
Next installed the "24619_MSXIPKernel_SYS_QVGA_WQVGA_HVGA_VGA_WVGA_0409" so I can use the latest build.
Thats all I did.
No extra EXT packages, Just cooked the ROM and below is what I get.
Anyone shed any light ?
5haddex said:
And back on topic
Ok. I extracted Oskitch again, added "RUU_Leo_HKCSL_WWE_1.72.831.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship"
as the base ROM.
Next installed the "24619_MSXIPKernel_SYS_QVGA_WQVGA_HVGA_VGA_WVGA_0409" so I can use the latest build.
Thats all I did.
No extra EXT packages, Just cooked the ROM and below is what I get.
Anyone shed any light ?
Click to expand...
Click to collapse
The 6.5.3 windows mobile builds have the top and bottom bar of different sizes while Manila is probably calibrated for the WM6.5 bars (indeed there's empty space at the top and overlap at the bottom). There is probably something else you have to do to fix manila after changing the windows mobile build but I'm pretty sure it's not a kitchen problem I've had several people reporting the Leo ROMs dump and build fine with the 1.31 betas.
Is anyone willing to assist me on getting a Stock HD2 rom and upgrading it to 6.5.x without the problems I am seeing ?
5haddex said:
Is anyone willing to assist me on getting a Stock HD2 rom and upgrading it to 6.5.x without the problems I am seeing ?
Click to expand...
Click to collapse
Could you post a screenshot of your problem, and if you upload your background, i will use it to replace the one in HTC Black.TSK (You need OCP CE CAB Manager)
I have posted a screenie of the problem and someone says its because manila is not the correct version for the 6.5.5 im using.
Dont suppose you have a 6.5.5 stock rom ???
So...
Can anyone let me have a oskitchen with 6.5.x + latest manila so I can add to it.
Greetings!
First off, I have little idea what I'm doing, this is my first attempt to create a custom ROM. I've searched around and can't seem to find a solution.
I've got an Xperia X1 and am using osKitchen.
The ultimate goal is to have a Japanese ROM with WM build 25369 with no additional UIs, i never use sense or whatever anyway, just the old today screen with cal, messaging, and time/date items.
I have:
Latest stock ROM for X1 (GENERIC_NAM_R3AA011)
23569_MSXIPKernel_SYS_QVGA_WQVGA_VGA_WVGA_0409 (Just Eng)
initflashfiles-dat-all-langs-updated-feb-24-2010.zip
RUU_Diamond_eMobile_JPN_1.81.881.2_Radio_Signed_Diamond_52.48.25.26_1.09.25.07_Ship.exe (6.1 JPN ROM)
Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65.zip
WM6550-23563-Rollup-All-Pkgs.rar (This has all languages)
Here's what I'm doing, anyone of them (or all) could be very wrong, hopefully I've done at least one thing right:
Imported X1 ROM for OEMDrivers, OEMApps, OEMOperators, oemversion, oem_dpi
Imported 6.1 JPN ROM for OEM Lang 411
-What i did here is i copied everything over from the JPN rom's oem 411 folder into the X1 OEM Lang folder, overwrote any conflicts, deleted any 0409 muis, and copied over the file from initflashfiles zip for 0411.
Replaced OEMXipKernel with the one from Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65.zip and selected custom XIP when making the rom with the one also found in that zip. Put the rest of the files (os.nb.payload, xip.bin, uldr.nb0, romhdr.bin) into the ROM Parts folder.
Then, I Used OS, OSFiles, MSXIPKernel, MSXIPKernelLTK from the 23569_MSXIPKernel_SYS_QVGA_WQVGA_VGA_WVGA_0409 zip, and the rest of the packages i used from the WM6550-23563-Rollup-All-Pkgs rar (because it had 0411 files).
I deleted dpi and lang folders that my device doesn't use (it uses 192dpi 480x800 and 0411) and built the ROM, flashed, and it shows the Sony Ericsson splash screen, and then goes black forever.
I know I must be doing something very wrong, any hints as to what?
Thanks
Pfff, what a big list,
Okay I did it this way, and I make my rom in 12 languages and they are all working.
1. Install oskitchen and import xperia rom
2. After finishing import 23563 build
3. Install another oskitchen and import diamond jpn rom
4. Copy the oem_lang 0411 and the ext packages to your kovsky kitchen be aware you put them in the right place.
5. Open the kovsky kitchen and select the Japanese language and select the packages you wanna use in your rom and you're done.
Regards,
Cool thanks!
That would be for 23563 though right? What if i wanted to use 23569 with 23563 packages? ....No real reason, higher number, figure it's better somehow....that even possible?
nemasu said:
Cool thanks!
That would be for 23563 though right? What if i wanted to use 23569 with 23563 packages? ....No real reason, higher number, figure it's better somehow....that even possible?
Click to expand...
Click to collapse
Just start with 23563, it's a good package and if you have a working rom you can alway's make the change.
Greetz,
Rataplan said:
Just start with 23563, it's a good package and if you have a working rom you can alway's make the change.
Greetz,
Click to expand...
Click to collapse
Ok sounds good, I was just thinking I probably shoulda tried with something a bit easier haha.....how would i make the change? is my approach correct?
nemasu said:
Ok sounds good, I was just thinking I probably shoulda tried with something a bit easier haha.....how would i make the change? is my approach correct?
Click to expand...
Click to collapse
If you extract the 23569 build, you only have to change the All and Common folder, but in your first post you where talking about a 25369 build and I didn't know what kind off build that was.
Succes buddy,
Make sure you have the proper wince.nls in your build. If you leave it out, the rom won't boot.
Farmer Ted said:
Make sure you have the proper wince.nls in your build. If you leave it out, the rom won't boot.
Click to expand...
Click to collapse
I used the one that came with the Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65 zip.
nemasu said:
I used the one that came with the Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65 zip.
Click to expand...
Click to collapse
I don't think there is any difference between those 2 wince.nls but if you wanna be sure just use the one in the 23563/COMMON folder.
Rataplan said:
I don't think there is any difference between those 2 wince.nls but if you wanna be sure just use the one in the 23563/COMMON folder.
Click to expand...
Click to collapse
Hmm, I've got a wince.nls in:
Sources\Devices\HTC Kovsky\Profiles\default\OEMXipKernel
Sources\Windows Mobile Builds\23569\0411\WinCENLS_Lang_0411
and
Sources\Windows Mobile Builds\23569\Common\WinCENLS_WWE
they are all different sizes....should they all be the same? or only have one? or?
nemasu said:
Hmm, I've got a wince.nls in:
Sources\Devices\HTC Kovsky\Profiles\default\OEMXipKernel
Sources\Windows Mobile Builds\23569\0411\WinCENLS_Lang_0411
and
Sources\Windows Mobile Builds\23569\Common\WinCENLS_WWE
they are all different sizes....should they all be the same? or only have one? or?
Click to expand...
Click to collapse
No I have them also, never take a look at it, only checked the file when I cooked my rom's never changed anything or replaced it with another version or from another build.
Hey,
I have the ROM dump of my HD Mini, wich is WM build 23103. But I was wondering if that should work on a Touch Pro/Fuze too. The Touch Pro/Fuze has another screen resolution. Is that a huge problem?
MadMatt
No you cant do this.
Screen resolution is an huge problem thats why there are differents res for any builds.
Perhaps you can try but i doubt that you will pass the second boot screen.
af974 said:
No you cant do this.
Screen resolution is an huge problem thats why there are differents res for any builds.
Perhaps you can try but i doubt that you will pass the second boot screen.
Click to expand...
Click to collapse
Okay, and can I use the Language Pack from build 23103 (of my HD mini) for build 23146? And will the 23146 build run if I copy the OEMDrivers folder only? Or should I copy other folders as well?
Btw, I'm using osKitchen 1.33
I gave a try with 23146 and Language pack from 21913 and rom worked fine so i guess you can go with 23103 LP.
You need also MSXIPKernel in addiction to OEM Drivers , your rom will boot but you will lack a lot of features like Phone,Wi-FI,Services.If you want a lite but functionally build try to exclude Youtube,Facebook,IME,Opera,Radio and so on,then you can try to leave one by one the other packs that you think useless and see if the rom works fine.
_Madmatt said:
Okay, and can I use the Language Pack from build 23103 (of my HD mini) for build 23146? And will the 23146 build run if I copy the OEMDrivers folder only? Or should I copy other folders as well?
Btw, I'm using osKitchen 1.33
Click to expand...
Click to collapse
af974 said:
I gave a try with 23146 and Language pack from 21913 and rom worked fine so i guess you can go with 23103 LP.
You need also MSXIPKernel in addiction to OEM Drivers , your rom will boot but you will lack a lot of features like Phone,Wi-FI,Services.If you want a lite but functionally build try to exclude Youtube,Facebook,IME,Opera,Radio and so on,then you can try to leave one by one the other packs that you think useless and see if the rom works fine.
Click to expand...
Click to collapse
So, if I understood this good, my ROM won't do much more than booting if I copy the OEMDrivers and MSXIPKernel from old build to new build? And how can I get everything back to work? :s
Sorry, newbie in ROM cooking...
I'm afraid that i dont understand what you wnat to do .
Now you have 23103 build for HD Mini in OsKitchen right?
And you want to do a rom with 23146 build in you Language (German) right?
If it is correct then import build 23146 with OsKitchen and after that go into you windows mobile folder and grab your language folder from 23103 and copy to 23146 folder.
Restart OsKitchen ,select the new builds with German language,select all the EXT package that you had before and start cooking.
Why did you ask about cooking with only OEM Drivers folder if you want a fully functional rom ( like the original i suppose)?
I think you've not understood me good. Okay, I'll clarify myself
I have a HD Mini ROM with build 23103. I want to make a Touch Pro ROM with the build of the HD Mini. Will the thing be okay when I just change the build number in OsKitchen? (because the Windows Mobile builds are all together in the three structure of osK).
PS: It's Dutch, no German
Nope, if you use the Original HD Mini 23103 build you will need the native resolution for Touch Pro (480x640).
My suggestion is:
Dump an original TouchPro rom.
Import 23146 build from OsKitchen (im not sure if you will find any 23103 build )
Change the language folder.
You cant use many of the EXT packages from HD Mini because the low resolution against the TouchPro.
_Madmatt said:
I think you've not understood me good. Okay, I'll clarify myself
I have a HD Mini ROM with build 23103. I want to make a Touch Pro ROM with the build of the HD Mini. Will the thing be okay when I just change the build number in OsKitchen? (because the Windows Mobile builds are all together in the three structure of osK).
PS: It's Dutch, no German
Click to expand...
Click to collapse
af974 said:
Nope, if you use the Original HD Mini 23103 build you will need the native resolution for Touch Pro (480x640).
My suggestion is:
Dump an original TouchPro rom.
Import 23146 build from OsKitchen (im not sure if you will find any 23103 build )
Change the language folder.
You cant use many of the EXT packages from HD Mini because the low resolution against the TouchPro.
Click to expand...
Click to collapse
Okay, but when I download a new build such as 23146, and I want to import it in osKitchen, the kitchen always says "no valid ROM dump in folder"... And indeed, when I look in the folders, the MSXIPKernel contains a lot of folders, but all those folders are empty... And the MSXIPKernelLTK is empty as well. The folder COMMON contains much folders wich aren't empty. But in my dumped stock ROM of Touch Pro, there are a lot of S000 files and S001 and so on. But the download does not have these files... And what should I do to get the newer build over there?
Download the new build.
Extract it.
Run oskitchen and choose import new build and follow what i made in the attached pic,thats always work for me.
_Madmatt said:
Okay, but when I download a new build such as 23146, and I want to import it in osKitchen, the kitchen always says "no valid ROM dump in folder"... And indeed, when I look in the folders, the MSXIPKernel contains a lot of folders, but all those folders are empty... And the MSXIPKernelLTK is empty as well. The folder COMMON contains much folders wich aren't empty. But in my dumped stock ROM of Touch Pro, there are a lot of S000 files and S001 and so on. But the download does not have these files... And what should I do to get the newer build over there?
Click to expand...
Click to collapse
When I do exactly the same I get this...
Thats strange,did you try with other builds?
Post here the link where you downloaded that build so i can try.
I suggest you to post this error in OsKitchen thread otherwise.
_Madmatt said:
When I do exactly the same I get this...
Click to expand...
Click to collapse
af974 said:
Thats strange,did you try with other builds?
Post here the link where you downloaded that build so i can try.
I suggest you to post this error in OsKitchen thread otherwise.
Click to expand...
Click to collapse
Haha, I disabled "Auto detect build number" and it worked Stays strange, but okay for now I'm now building. I hope I won't brick my device, as it's not mine ;D Can I brick it by upgrading 6.1 to 6.5?
Glad that you sorted it.
Nope you cant brick it while upgrading from 6.1 to 6.5 just remember to recmode some modules (oskitchen tell you which one when you dump for the 1st time a new build) otherwise check in TouchPro forum if there is a 6.5 Kernel ready,this should be better for performance.
_Madmatt said:
Haha, I disabled "Auto detect build number" and it worked Stays strange, but okay for now I'm now building. I hope I won't brick my device, as it's not mine ;D Can I brick it by upgrading 6.1 to 6.5?
Click to expand...
Click to collapse
af974 said:
Glad that you sorted it.
Nope you cant brick it while upgrading from 6.1 to 6.5 just remember to recmode some modules (oskitchen tell you which one when you dump for the 1st time a new build) otherwise check in TouchPro forum if there is a 6.5 Kernel ready,this should be better for performance.
Click to expand...
Click to collapse
Okay, Thanks for everything mate!