Unroot Cyanogenmod6 - EVO 4G General

Itried different way by the forum to unroot but seem doesnt work
- I wiped data and davin then flash the PC36IMG for 147.651.1 - Nothing
- Cyanogen6 doesnt have HTC Sync which i cant use the RUU STOCK.exe , i tried alone and giveme errors 171 and 140
- I followed step by step by this forum (Bottom) http://forum.ppcgeeks.com/showthread.php?t=123714 and i cant go after step 5L because show # (rooted) and not $(not rooted), I think that why
Please any suggestion to get back in stock in a easy way. I need bring back to sprint tomorow or after for exchange
thanks in advanced.

Flash a Sense enabled ROM like Fresh then run the RUU.

criccio said:
Flash a Sense enabled ROM like Fresh then run the RUU.
Click to expand...
Click to collapse
What you mean flash a sense?, Sorry for the Noob question.
Got a xda link to follow?

Some ROMs include Sense in them...that is HTC's overlay (launcher). Some ROMs don't. CM's does not have Sense in it.
So...if you are still rooted...flash Fresh's ROM since the other poster says it includes Sense. Then go from there.
(I am only interpreting and you'll need to go find Fresh in the dev section.)

cocobongo77 said:
What you mean flash a sense?, Sorry for the Noob question.
Got a xda link to follow?
Click to expand...
Click to collapse
You have the know-how to flash CyanogenMod but you can't flash Fresh? Something isn't adding up here....
http://forum.xda-developers.com/showthread.php?t=726090

criccio said:
You have the know-how to flash CyanogenMod but you can't flash Fresh? Something isn't adding up here....
http://forum.xda-developers.com/showthread.php?t=726090
Click to expand...
Click to collapse
Im worrking in it , right now trying flash with the fastboot.exe and the recovery-ra.img Will see if i an configure the fastboot open and dissapear. Im noob

I cant flash with flash_image recovery /sdcard/recovery-evo.img
I got this error : error writiing recovery: No space left on device . Im so confused
any help

I flash already with Fresh 1.0 Nice rom
Thnanks

Related

Rooting Mytouch3g 32b(t-mobile/voda) Without goldcard

Guide To rooting mytouch 3g 32b (Even if you have 1.6 update)
Propz to:Amon_RA, andreev2001, Cyanogen, and any one else sources I used
Ok after Searching the forums and finding all types of ways to root a Mytouch and having some/no luck I decided
to created a thread that goes into complete detail(or try to at least) about each step that is guaranteed to work if done correctly.
READ
This guide does not require a goldcard or adb . I am also not responsible for bricked/broken phones. Now since that's out of the way happy rooting!!
IF your phone is currently running 1.5(cupcake) already then skip to step 3
1.First of all we can't really do anything with 1.6 so we must downgrade to 1.5 by downloading this sappimg.nph and installing it
2.Once downloaded put it on your sdcard and reboot and go into hboot mode (Hold END+VOLUME DOWN). Preform the update
3.Once update is COMPLETLY finished and it asks you to reboot. Do so, then load your phone up fully and download this apk here (flashrecovery.apk) then run it.
Skip these steps and go to step 4 if you know how to install a apk
3a.to install this apk you have to enable the install unkown source in your settings. To do this hit menu >Settings>Applications>Unkown Soruces(check this).
3b. After this go to the market and download a app called "Astro" (the description should mention somthing about file manager) or you could use another apk installer but I prefer this one.
4. After installing the apk run it and click on “backup recovery image” let it do what it does then click on “Flash Cyanogen Recovery 1.4″.
5.Once that is done you want to download the SPL by clicking here, then put it on your sdcard. After that download any ROM(If you dont know what a ROM is search, I cant tell you everything ) of your choice and rename it "update.zip" without quotes then place it in your sdcard
6.Reboot your g1 and hold down the "HOME" key and it should bring up the flash image recovery screen. Choose apply any zip from sd and then choose "update.Engineering-SPL-HBOOT-1.33.2005-signed.zip". It finishes almost immediately with message saying successfully flashed(if it doesn't you prolly ate to much chicken ).
7. Then after it is installed select the restart option and then load into fastboot mode (Hold "BACK" arrow key while its restarting). Once fastboot is loaded the SPL info should say HBOOT-1.33.2005 (SAPP30000). If it does congrats almost there!!!!! If it doesn't, you did somthing wrong and you need to retrace you're steps.
8.Exit fastboot by hitting the "GREEN" button and before the phone boots up hold the "HOME" button and then go to "apply sdcard:update.zip". Let it install and VOL LA you installed your ROM. Preform a reboot and you will now have a rooted phone with a custom ROM
1) thanks for posting, ive tried to follow other instructions over the past few days to no avail
2) any chance of hosting the sappimg.nph file somehwere else? I cant access rapidshare from my phone. I would greatly appreciate it.
OMG SOOO EASY!!!! Mods should sticky this as the new root / rom upload process
I was running android 1.6 on tmobil mytouch 3g with perfected spl 1.33.2006
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
Thanks for posting - much appreciated. Can I ask what the benefit of changing the SPL is? Is this required?
My concern is regarding warranty - if I flash a new SPL, it is my understanding that I will not be able to flash my current one back, and hence return the phone to stock if the need arises.
ParanoiaPersonified said:
Can I ask what the benefit of changing the SPL is? Is this required?
Click to expand...
Click to collapse
Yes, it is required. You cannot root with the MT3G SPL, so you need to change the SPL.
ParanoiaPersonified said:
My concern is regarding warranty - if I flash a new SPL, it is my understanding that I will not be able to flash my current one back, and hence return the phone to stock if the need arises.
Click to expand...
Click to collapse
You can flash it back to the original SPL. You would then be unrooted. Look at Amon_RA's original rooting process with Gold Card. At the bottom, he gives directions on how to return your phone to the unrooted state in case you need to do that.
Thanks, I thought with one-click-root, once you'd got the recovery rom flashed, you were done - that you had root and could flash what you liked.
For the record, I'm Voda 32B, but have perfected SPL .0007.
[EDIT] Yes, that thread has a file to return to stock, but only for MT3G, which is why I am hesitant to flash a new SPL to my device.
I've still seen in lots of places mind, that suggest this process works without the flashing of a new SPL. Such as: http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
[EDIT]
What happened to the ability to format and
and put partitions from the recovery? I just got another Mytouch and rooted it and no ability to put the partions from the recovery mode? I think I had version 1.2 and now I have 1.4
FenderGuy said:
and put partitions from the recovery? I just got another Mytouch and rooted it and no ability to put the partions from the recovery mode? I think I had version 1.2 and now I have 1.4
Click to expand...
Click to collapse
You still can, but not with the recovery img ur using wirch is cyanogen 1.4. Just flash amans new recovery img and you will be able to partion
4. After installing the apk run it and click on “backup recovery image” let it do what it does then click on “Flash Cyanogen Recovery 1.4″.
backup failed:I received that could not run command
cparekh said:
Yes, it is required. You cannot root with the MT3G SPL, so you need to change the SPL.
Click to expand...
Click to collapse
I have rooted my myTouch3G with the 1-click method (twice actually, needed to take it to the store), and I have the perfected SPL 1.33.2006.
The main issue with this SPL is that it does not allow you to use fastboot. As far as I know, this has nothing to do with root access.
Can confirm that I've performed the OP's procedure but *without* flashing a new SPL, and everything is working fine.
Now running CyanogenMod 4.2.2 w/ CM Recovery 1.4.
Does anyone have the link to the partitions recovery? I tried to put the Hero recovery on and it does not want to come on and I still show the Cyanogenmod v1.4 +jf....someone help
Also in the top it has Andriod system recovery (2)? I did it twice, how do i take one off?
kryptik06 said:
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
Click to expand...
Click to collapse
Any word on rehosting? I know its a pain but my phone is my only internet connection.
acis said:
Any word on rehosting? I know its a pain but my phone is my only internet connection.
Click to expand...
Click to collapse
here you go sorry for the wait
http://www.4shared.com/file/145083511/5ffeb21d/SAPPIMG.html
vodafone htc magic 32b gives error to ur method
error "update fail model id incorrect "
i think this sappimg is for the mytouch and not for htc magic vodafone. so it gives this error.
do you have any solutions for this.
thank you
kryptik06 said:
here you go sorry for the wait
http://www.4shared.com/file/145083511/5ffeb21d/SAPPIMG.html
Click to expand...
Click to collapse
Flashed last night, worked perfectly. I had no idea it was going to be this much faster. Thankyou.
I am looking for a rom that has a wifi tether app!
yes I am to the step where u download a rom and I am looking for a rom that has WIFI TETHER for my laptop...
much will be appreciated if u can help=D
- THANKS
well i guess right now i just want my phone rooted...
i just want a rooted phone cuz i can download a wifi app i just need a rooted phone....thanks for your post though....much much much much appreciated...nice and simple...other post or vids ive seen go to far in to detail about it and i forget what step im on .lol
-THANKS

Sprint stock rom

Can someone please tell me how to flash back to stock sprint rom
I'm in desperate need of it by Monday... I have to send it back in
crazylegs90 said:
Can someone please tell me how to flash back to stock sprint rom
I'm in desperate need of it by Monday... I have to send it back in
Click to expand...
Click to collapse
check out this link bro.
http://wiki.xda-developers.com/index.php?pagename=CDMA Hero ROMs
i found it in a the roms sticky wiki
You need to RUU. That restores the stock ROM, deletes Amon RA, and destroys evidence of rooting it. Only works on windows.
Just flash the sprint RUU.
http://forum.xda-developers.com/showthread.php?t=559622
bikcmp said:
Just flash the sprint RUU.
http://forum.xda-developers.com/showthread.php?t=559622
Click to expand...
Click to collapse
i tried it but keep getting a usb error can you help ??
You need to copy the ADB.exe from the Android SDK over to the RUU folder.
Or you can install HTC Sync... that also fixes the USB error. However, ADB.exe in the RUU folder would be quicker.
ok iGot the usb drivers for android but after the RUU.exe finishes running my phone continues to boot the custome rom instead of stock Sprint rom

[Q] Can anybody tell me which is the official rom for wildfire ?

Hello All, hope you all are ok
i bought my wildfire 3 months ago and that mean time i had so little knowledge about android and unfortunately i moved stock rom to cm7. and now i want to back in my stock rom (official)
it notice you that i have tried some rom (ruu...exe based) but i think these are not official (i am not sure)
anyway can anybody tell me which one it the official stock rom for hTC wildfire
RUU's are official.
3xeno said:
RUU's are official.
Click to expand...
Click to collapse
Thanks
ok , can you please give me the latest version RUU download link
by the way i have installed "RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_signed_2.exe" is this one latest RUU and official ?
if yes then where is the defaults wallpapers for android which i saw first time
AlphaRev/Revolutionary breaks some functions of official ROM's. So you have two ways to get back:
1) Sense Fix
http://forum.xda-developers.com/showthread.php?t=1156713
2) Remove AlphaRev / Revolutionary S-OFF HBoot and go back to S-ON
http://forum.xda-developers.com/showthread.php?t=1160251
Both will give you back your wallpapers, initial setup wizard, and default homescreens.
but i dont have root
Then use option 2. If you don't have root, I assume you don't wish to install custom ROms and stuff anymore. Going back to S-ON doesn't need root.
3xeno said:
Then use option 2. If you don't have root, I assume you don't wish to install custom ROms and stuff anymore. Going back to S-ON doesn't need root.
Click to expand...
Click to collapse
C:\fastboot>fastboot oem mb 9C068490 1
< waiting for device >
... FAILED (status malformed (1 bytes))
Are you sure you have specifically seletced Fastboot in the HBoot menu? It doesn't look like it.
3xeno said:
Are you sure you have specifically seletced Fastboot in the HBoot menu? It doesn't look like it.
Click to expand...
Click to collapse
ok, thanks i have now s-on
but these wallpapers and sense are not fixed yet...
and i am trying to reinstall the rom but now i am getting
Error 131 Customer ID
on ruu installation...boss please help me
Create a Goldcard and try flashing the RUU again
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
OR, if you want an app that automates most of the process listed above, use this:
http://android.modaco.com/topic/308798-pc-application-goldcardtool/
Dear 3xeno
Plz Short out my problems, currently i'm on CM7 and want to switch over to original ROM
Plz suggest me simple method to roll back on same.
should i go for "RUU version" from shipedrom.com Or Directly go for this
1) Sense Fix
http://forum.xda-developers.com/show....php?t=1156713
Or any other help will be much Appreciated.
Thanks
Sense fix is only for fixing the original ROM's wallpapers and widgets (Which don't display if you have S-OFF'ed using Revolutionary). To go back to your original ROM, you have to install the RUU, or, alternately, flash this ROM like you flashed CM7:
http://forum.xda-developers.com/showthread.php?t=877977
(If you are claiming warranty, then definitely go the RUU way)
Thanks dear for fast reply !
i'ill go for flash the Rom link provided by you.
b/w suggest me that how to save the contacts before going to Flash.
3xeno said:
Create a Goldcard and try flashing the RUU again
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
OR, if you want an app that automates most of the process listed above, use this:
http://android.modaco.com/topic/308798-pc-application-goldcardtool/
Click to expand...
Click to collapse
i have followed the steps to get goldcard and success ( how i know am i right ? )
by the way same problem in installing RUU
Error 131 Customer ID
3xeno said:
Create a Goldcard and try flashing the RUU again
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
OR, if you want an app that automates most of the process listed above, use this:
http://android.modaco.com/topic/308798-pc-application-goldcardtool/
Click to expand...
Click to collapse
unfortunately i am success in goldcard ...now what to do ?
3xeno Man you ROCKS ...many many thanks...i am done
oh..i have another request ...
i want to back 2.1 ( i have the RUU) , last time when i wanted to back 1.6 it was successfull
but now i cant install 2.1...!
it said
Error [140]: Bootloader version error
shemulweb said:
oh..i have another request ...
i want to back 2.1 ( i have the RUU) , last time when i wanted to back 1.6 it was successfull
but now i cant install 2.1...!
it said
Error [140]: Bootloader version error
Click to expand...
Click to collapse
Now you can't. If you wanted Eclair, you should have flashed an Eclair RUU when you were on CM7. To go to 2.1, you have to go the long way, get S-OFF using Revolutionary again, and then, downgrade and get back S-ON. (Basically, the entire thing of rooting again, downgrading, and unrooting)
BUT, There is an alternate method, I am listing the post, but remember, its complex:
http://forum.xda-developers.com/showpost.php?p=13114319&postcount=29
---------- Post added at 11:25 PM ---------- Previous post was at 11:23 PM ----------
Hunk03 said:
Thanks dear for fast reply !
i'ill go for flash the Rom link provided by you.
b/w suggest me that how to save the contacts before going to Flash.
Click to expand...
Click to collapse
There are a lot of ways. If you had your contacts backed up on your Google Account, then you need not save it again. Simply re-sync your phone after installing the new ROM, and it will re-add all your contacts.
Alternately, go to Contacts, Press Menu Key, Select Import/Export, then select Export to SDCard, this will create a VCF file on your SDCard with all contacts. To restore, select Import, and select this VCF File.
Lastly, there are a ton of 3rd party apps available to do this. Just perform an Android market search for "Contact Backup".
well, now i am s-off and installed cm7 again.. successfully now what ?
Now flash the Eclair RUU (WWE 1.37.405.1) and repeat the same steps to get back S-ON. Remember to use the HBoot.nb0 file from your specific RUU.

magic 32b recovery

hey guys everytime i try to flash a recovery in fastboot it comes up
FAILED (remote: not allow)
is there away to fix this issue as most of the spl eng files are no longer downloadable due to sites being closed
You... don't flash it in fastboot? Just a suggestion
Do I not? How do I flash it then as I only have stock recovery?
1. Get root
2. Install rom manager
3. Try to flash recovery from list
P.s. in extra cases there is trouble with flashing recovery through rom manager, so you have to flash it manually (read one of sticked topics in general section)
Sent from my A7-040 using Tapatalk
Rom manager won't install iv already tried that option. Is it anything 2do with hboot?
DanOMac said:
Rom manager won't install iv already tried that option. Is it anything 2do with hboot?
Click to expand...
Click to collapse
No. This mode solves other problems...
You need follow this manual: http://forum.xda-developers.com/showthread.php?t=756918
If you have root already, then do steps 5, 7 and 9
iv already tried everything on the link u posted I'm losing my patiants with this old phone think I will just quit at go back 2playing around with my sensation
DanOMac said:
iv already tried everything on the link u posted I'm losing my patiants with this old phone think I will just quit at go back 2playing around with my sensation
Click to expand...
Click to collapse
Yep, but you did not provide any technical info about troubles, that i can not help you.
What info would u like to no
DanOMac said:
What info would u like to no
Click to expand...
Click to collapse
What is exactly problem, when you are flashing recovery manually?
I try 2push it in fast boot and it says remote not allowed
DanOMac said:
I try 2push it in fast boot and it says remote not allowed
Click to expand...
Click to collapse
And why are you using fastboot?
Because I only have stock recovery and from manager will not install wot other ways are there 2flash it
Manually from adb or a terminal emulator
Or try this app: http://db.tt/VuMG4Owy (don't remember where I got it.. if its a paid app, I will remove it. Link will be removed in ~24 hours)
the app in the link does not work says my device htc magic is not supported
all sorted folks i made a goldcard flashed new spl and got s-off recovery flashed fine after that thanks for ur help

[Q] whats the easiest way to install android

Hi, I have the hdc hd2 with spl 3.03.0000 xe, and radio 2.15.161.3.
You maybe able to tell by that that im new to this, but want to install android as i dont like windows 6.5. I've managed to install a stock windows rom with the information i've learned here. But now i need help.
I want to install froyo or gingerbread as ive used these before on other phones.
So what is the easies way to do it and wheres the best place to get the rom from.
Please try to make it as simple as possible, Thanks.
It depends, do you want NAND Android or are you happy with running SD Android? Basically, if you want SD Android it couldn't be simpler. Just go to the SD section, download a build, place the Android folder on the root of your SD card and hit CLRCAD then HARET in the file manager. If you want NAND Android it's still pretty straightforward. Follow this guide and you should be fine. If you find even this guide too complex try using the NAND Toolkit. If you can't use that, don't bother flashing NAND Android and stick with SD Android.
Have you tried using Google? <<< I'm flaming.
Why didn't you look for the Newbies' Guides that are floating everywhere? they will guide you from the moment you pay for your phone till you are welcomed with Android's welcome screen. <<<I'm trying to be nice.
Here you go : http://forum.xda-developers.com/showthread.php?t=893948 , from start to finish. <<< I'm being nice.
Choose wisely ...
EDIT:
It always takes more time to write a poem than it does to write an article
You were faster this time, Nigel
Edit v1.1:
lol, I guess you're right, It's a double win . Furthermore, I just couldn't b.a. to look for a recent guide, I simply made a quick google about guides for hd2-android and this came up, didn't really check it
Next time, I'll be faster ..... and use bigger words
Marvlesz said:
Have you tried using Google? <<< I'm flaming.
Why didn't you look for the Newbies' Guides that are floating everywhere? they will guide you from the moment you pay for your phone till you are welcomed with Android's welcome screen. <<<I'm trying to be nice.
Here you go : http://forum.xda-developers.com/showthread.php?t=893948 , from start to finish. <<< I'm being nice.
Choose wisely ...
EDIT:
It always takes more time to write a poem than it does to write an article
You were faster this time, Nigel
Click to expand...
Click to collapse
Muahahahaha, I win Also, you linked an outdated guide for the DFT Stock desire build, so I double win (if that's possible)
Thanks guys after more reading and searching i think i should go the nand root.
This means i need hspl on it it first and i can only install this if i have spl 1.42.0000. Mine says spl-3.03.0000. It also says installing a stock rom will roll this back. I've installed stock win rom yesterday and it didnt touch the spl.
Can i still install hspl with this or do i need it?
Is there a list of available roms on this site?
tradvang said:
Thanks guys after more reading and searching i think i should go the nand root.
This means i need hspl on it it first and i can only install this if i have spl 1.42.0000. Mine says spl-3.03.0000. It also says installing a stock rom will roll this back. I've installed stock win rom yesterday and it didnt touch the spl.
Can i still install hspl with this or do i need it?
Is there a list of available roms on this site?
Click to expand...
Click to collapse
*sigh* did you read Marvlesz's post about Google? Download HSPL4 and use it to flash HSPL 2.08, no ROM downgrade is necessary. Basically after you've done that it's as simple as flashing MAGLDR, CWM and your ROM (and trust me, all of that won't take you more than 30 minutes at the very most).
Marvlesz said:
Next time, I'll be faster ..... and use bigger words [/B]
Click to expand...
Click to collapse
Lol, just got that part
Thanks again got the hepl bit done, downloading a rom now got MAGLDIR113 down and ready.
Having problem getting phone to sync with vista on pc, it just wont do it. Got it to sync on the laptop ok, any ideas with pc problem? Keep getting rapitool errors.
tradvang said:
Thanks again got the hepl bit done, downloading a rom now got MAGLDIR113 down and ready.
Having problem getting phone to sync with vista on pc, it just wont do it. Got it to sync on the laptop ok, any ideas with pc problem? Keep getting rapitool errors.
Click to expand...
Click to collapse
Check your device manager did u see mobile device? and is it working?
if not try to Reinstall the WMDC driver?
I used to have this problem too after i reinstall the driver the phone will be detected again.
However if u still can't connect the phone to your PC (it's driver problem, i think).
Try task 29 Change to cLK for me it fixed everything. (using HD2 toolkit is easiest way)
Sorry for being a bit dumb here but stuck again.
I've downloaded 4 roms-
danik supersonic v1.0 lite
boxmax.s3.5v8.0.magldr
boxmax.s3.5v8.5.magldr
boxmax.s3.5.v8.5.haret.sd
unzipping the first 3 provide no DAF.exe or install.exe, so stuck there.
unzipped the last and copied to sd card and the phone just stalls on the htc quietly brilliant screen.
What can i try next?
tradvang said:
Sorry for being a bit dumb here but stuck again.
I've downloaded 4 roms-
danik supersonic v1.0 lite
boxmax.s3.5v8.0.magldr
boxmax.s3.5v8.5.magldr
boxmax.s3.5.v8.5.haret.sd
unzipping the first 3 provide no DAF.exe or install.exe, so stuck there.
unzipped the last and copied to sd card and the phone just stalls on the htc quietly brilliant screen.
What can i try next?
Click to expand...
Click to collapse
Which guide did you follow? The one I posted or the one which Marvlesz posted? Use the one I posted because the one he posted is outdated. You install CWM then flash the ROM as a zip file. I really have no clue how somebody can find it so difficult to follow simple instructions: DOWNLOAD A NAND ROM, NOT AN SD ROM. You've said that you want a NAND ROM and then you try to flash an SD build? At least have some common sense, please. Unless you have a problem which cannot be solved by reading in the future I refuse to give any more help, because it appears to be hopeless
thanks again i've learned alot more tonight, got my first flash done just waiting for it to load. Last question before i leave you alone Is there a way to tell the difference between which mods are CWM and which wont work.
tradvang said:
thanks again i've learned alot more tonight, got my first flash done just waiting for it to load. Last question before i leave you alone Is there a way to tell the difference between which mods are CWM and which wont work.
Click to expand...
Click to collapse
Basically all ROMs use CWM, other than the DFT Stock Desire ROM. For everything else, just download the MAGLDR version of the ROM if there is one (many ROMs automate MAGLDR/cLK), change your system partition to the required size and flash the ROM.
hi tried downloading 6 roms now
DFT_LEO_NAND_Android
BoxmaX.S3.5.v.8.5.Magldr
For.user.Nand.v8.x
BoxmaX.S3.5.v.8.5.Haret.SD
BoxmaX.S3.5.v.8.0.Magldr
DFT_LEO_MAGLDR113_DAF
Android_2.3.5_Danik_Supersonic_v.1.0_Lite
Put all of them on the memory card and it only recogognises the Danik one when i go to choose zip from sd card.
When i try to load that it goes through ok till i reboot then it freezes at the HTC screen.
tradvang said:
hi tried downloading 6 roms now
DFT_LEO_NAND_Android
BoxmaX.S3.5.v.8.5.Magldr
For.user.Nand.v8.x
BoxmaX.S3.5.v.8.5.Haret.SD
BoxmaX.S3.5.v.8.0.Magldr
DFT_LEO_MAGLDR113_DAF
Android_2.3.5_Danik_Supersonic_v.1.0_Lite
Put all of them on the memory card and it only recogognises the Danik one when i go to choose zip from sd card.
When i try to load that it goes through ok till i reboot then it freezes at the HTC screen.
Click to expand...
Click to collapse
Screw it, I can't help you if you're this f**king stupid.
Cheers nasty c*nt.
tradvang said:
Cheers nasty c*nt.
Click to expand...
Click to collapse
Is that how you say thanks to those who were trying to help you ?
Follow this : http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7 شبر بـ شبر and you should have Android by the end of its steps.
(btw, post reported)
I've said thanks before for his help. Ive asked for the difference between mods and how to differenciate them, i cant work out out why only 1 out of 6 is recognised. And i've downloaded the magdlr versions as suggested.
Then he calls me f*cking stupid. Think i have every right to be p*ssed off.
What do you mean by "Difference between mods" ? All mods come in a .zip package that is flashed in CWM.
When you download something (any mod, rom, kernel or anything) off the NAND section (this : http://forum.xda-developers.com/forumdisplay.php?f=928 ) it is going to be a flashable CWM. (Unless noted)
But when you download something off the SD section ( this: http://forum.xda-developers.com/forumdisplay.php?f=735) it is going to be ... well ... to be put on the sd without flashing.
Is this what you are asking for ?
Nigeldg said:
Which guide did you follow? The one I posted or the one which Marvlesz posted? Use the one I posted because the one he posted is outdated. You install CWM then flash the ROM as a zip file. I really have no clue how somebody can find it so difficult to follow simple instructions: DOWNLOAD A NAND ROM, NOT AN SD ROM. You've said that you want a NAND ROM and then you try to flash an SD build? At least have some common sense, please. Unless you have a problem which cannot be solved by reading in the future I refuse to give any more help, because it appears to be hopeless
Click to expand...
Click to collapse
tradvang said:
I've said thanks before for his help. Ive asked for the difference between mods and how to differenciate them, i cant work out out why only 1 out of 6 is recognised. And i've downloaded the magdlr versions as suggested.
Then he calls me f*cking stupid. Think i have every right to be p*ssed off.
Click to expand...
Click to collapse
Sorry, but I have every right to call you stupid too. I even posted DOWNLOAD A NAND ROM, and you go on and download ROMs from the SD section? It's frankly pathetic if you can't do that little reading, and if I were you I wouldn't bother flashing anything in the future. You're lucky you have a pretty much unbrickable device, because if you didn't I'm sure you would be sitting right there with a useless piece of hardware right now.
Thanks Marvlesz, thats got me sorted, the problem was when he said just download the "MAGLDR version", i thought anything with that in the name was the correct one. I'm not here to get into a slanging game so i'll just leave it that.
Thanks again.

Categories

Resources