Hi,
I purchased a MBW-200 Bluetooth Watch for use with my new X10 only to find that I cannot pair it with it like it says to do so in the instructions.
I was wondering if anyone here had managed to do so or knew if there was any reason why it didn't work?
It seems I cannot send the watch back as now it is opened so the only way I can send it back is if it is faulty. So if it is meant to pair with my X10 then it is faulty and I can send it back.
Thanks in advance.
It does not work with android 1.6. Just wait for the 2.1 update to pair.
Search for OpenWatch in the forum to know more
Thanks. I will check it out.
Related
Hi friends I am using ORange SPV3100 device[Hermes] I got a nokia bluetooth headset, but I could not able to use it as my device couldn't able to find it. I dont know what things I need to do to get this accessory work for me. I am helpless as there is no guide available for this problem. My Device supports BT 2.0 with A2DP. Which company headset works best with this phone & anything more. Thanx
Saksham Katyal
You might wanna post this in the HERMES ACCESSORIES forum?
Junner2003 said:
You might wanna post this in the HERMES ACCESSORIES forum?
Click to expand...
Click to collapse
Sorry in a hurry I forget to put it in a right place. I did search & found most of similar queries posted here. Any moderator can do that for me. Any solution about my problem?
Usually you have to set the bluetoon headset device to pairing mode, then you phone can find it.
how to do that will very from device to device. You need the manual or call Nokia about it.
If you already did that double check to make sure you did it right. If that not it, I dought any of us are going to know how to fix it. Return/excannge get a different device.
Good luck...
Cant get it working, paired but not connected...any ideas anyone ? driving me nuts
Bury Take and talk universal bluetooth cradle
Thanks for all your help (sarcasm)
Done some digging and the phone sees the car kit as headphones, any idea how to change bluetooth profiles on the hero?
Not sure how to help you but just to let you know that it's possible: it worked out of the box on my car - both as phone and as music player.
I''m not sure you can. The car kit is obviously not providing the hero with the correct bluetooth type id so that it can load the correct profile. I think I remember this on older Nokia phones as well. I have a Nokia car kit and the hero works great (except that I have to manually connect it each time!)
Sorry can't be more help.
puckoon said:
Thanks for all your help (sarcasm)
Done some digging and the phone sees the car kit as headphones, any idea how to change bluetooth profiles on the hero?
Click to expand...
Click to collapse
Thanks for the replies guys
Hands free manual just says change profile on phone, not giving in just yet, have connected six different phones to this kit with no problems,
Surely must be able to change profile on a brand spanking new phone, swapping the sim into my old htc prophet for the next two years is not going to be fun!
Hello everybody!
I been always having difficulties pairing HTC devices with my AUDI A6 (2005) hand-free using bluetooth (HTC Diamond, HD, and now HD2). The phones will pair but neither contacts or recent calls would appear in my car's display (MMI)
I used to solve the problem using a software extension for the bluetooth stack called JETWARE MOBILE, but HD2 uses WIDCOMM's bluetooth stack instead of Microsoft's one, and JETWARE software won't support it.
I've found a thread about pairing with a volvo hands-free where have been found a solution (changing WIDCOMM registry key "SupportedFeatures" and others)
Anyway it appears to be a volvo's specific solution so it doesn't work for my AUDI (I still can't get any contacts, recent calls, etc. transfered to my car using those)
Does anybody have an idea?
Thanks in advance
Sounds like Audi does not support the handsfree profile HD2 uses. What about using sap (sim access)?
The best way would be to ask your Audi Partner about a solution.
I bet they have an own SAP bluetooth device as i read that Audi uses Handsfree on default and SAP as an option for more money.
It is always a matter of the cars software and not of the HD or HD2.
I own the Mercedes CLC 2008 and i need to buy an extra utility (SAP bluetooth dongle SLR design) for more than 300 €.
Didnt do it till today but i got a new job and def. will buy it when i get the first money.
With SAP it will definately work - also confiremd by several forums i found via google.
BTW: The brother of my wife has a new Volvo V50 and he cant pair his Nokia phone with the cars system but my old HD as my new HD2 too can pair without any problem. I can shuffle through my contacts where he got the same issue as u - but with his nokia phone.
I'm not sure if you've updated the MMI software in your Audi. I had a older software version in my 05 A6 there are 2 disks that will get you to the latest version. I have flawless phone access now. It's like a ROM upgrade for the car.
You can read more about it at www.audiworld.com and check the C6 forum.
rsacipher said:
I'm not sure if you've updated the MMI software in your Audi. I had a older software version in my 05 A6 there are 2 disks that will get you to the latest version. I have flawless phone access now. It's like a ROM upgrade for the car.
You can read more about it at www.audiworld.com and check the C6 forum.
Click to expand...
Click to collapse
I don't really think I've got any MMI updates. I don't even know what version I've got...
I'll ask my dealer to find out.
Thanks
pitaXDA said:
I don't really think I've got any MMI updates. I don't even know what version I've got...
I'll ask my dealer to find out.
Thanks
Click to expand...
Click to collapse
I doubt your dealer will fix it for you unless you are still in warranty and you are having an issue with it.
My dealer didn't want to touch it because like one of these phones if you mess up the upgrade you can brick it.
If you want to take a picture of the SW version and post it or send it to me I can tell you what you have.
Are you in the US?
I forgot to mention if you fry the MMI it is about $2,000 to fix. I was able to get the lastest software installed in about 2 hours.
rsacipher said:
I doubt your dealer will fix it for you unless you are still in warranty and you are having an issue with it.
My dealer didn't want to touch it because like one of these phones if you mess up the upgrade you can brick it.
If you want to take a picture of the SW version and post it or send it to me I can tell you what you have.
Are you in the US?
Click to expand...
Click to collapse
I'm from Spain, little far away from US...
When I took my car to its last service (55.000 miles) they told me they were supposed to apply a software update (I was in a hurry so I told them to came back later... 8 months ago...).
May be that update will also apply to the MMI?
Anyway I'll take the picture and show you the SW version.
Thanks
pitaXDA said:
I'm from Spain, little far away from US...
When I took my car to its last service (55.000 miles) they told me they were supposed to apply a software update (I was in a hurry so I told them to came back later... 8 months ago...).
May be that update will also apply to the MMI?
Anyway I'll take the picture and show you the SW version.
Thanks
Click to expand...
Click to collapse
It's hard to say what they wanted to update, it could have been the ECU or MMI. I found that since I had an early model 05 my software was really out of date. Once I updated it the phonebook and connection worked so much better.
Audi usually supply the latest firmware as part of the navigation disk updates (they auto update when you first put them in).. this is the case for the older RNS-E's and probably the case for MMI too..
rsacipher said:
I doubt your dealer will fix it for you unless you are still in warranty and you are having an issue with it.
My dealer didn't want to touch it because like one of these phones if you mess up the upgrade you can brick it.
If you want to take a picture of the SW version and post it or send it to me I can tell you what you have.
Are you in the US?
Click to expand...
Click to collapse
Hello again
Here I'm posting the pictures of my MMI. It's my first time uploading images so I hope it works.
Thanks again
khughes said:
Audi usually supply the latest firmware as part of the navigation disk updates (they auto update when you first put them in).. this is the case for the older RNS-E's and probably the case for MMI too..
Click to expand...
Click to collapse
May be... but I don't have navigation in my MMI. I actually have the MMI Plus but the navigation module was too much for the value (Tomtom gives me the same except MMI integration for less than 1/10 of the price)
Thanks anyway
dameon12 said:
I own the Mercedes CLC 2008 and i need to buy an extra utility (SAP bluetooth dongle SLR design) for more than 300 €.
With SAP it will definately work - also confiremd by several forums i found via google.
Click to expand...
Click to collapse
apologies to OP, this is slightly off topic...
Hi Dameon12,
I think this works only with the V3 SAP Mercedes module, and this works only with the newer MB audio units.
I have a 2006 Mercedes with Comand and the V2 SAP module, but no success as yet pairing with the HD2 - but I'm open to suggestions!
Thanks,
Eddie
pitaXDA said:
Hello again
Here I'm posting the pictures of my MMI. It's my first time uploading images so I hope it works.
Thanks again
Click to expand...
Click to collapse
Hello rsacipher
Could you please tell me if those pictures were what you ask me to take?
If I get out the software version to search for I might give it a try...
Thanks
I have connected the MW600 to an iphone and i found out that it reads from the address book and when a call is received the name is displayed, but when i use it with the x10 it doesnt read the phone book and when a call is received it only displays the number. Is there any option that i should check that would make the MW600 read from address book?
I dont beliv so. I cant even get my mw600 work with cals on the x10 atm.
-------------------------------------
Sent from my X10i
how does it work with you then???
Get a Nexus One with the 2.2. update. Then you'll find the full bluetooth function that is available for the MW600.
How do I know? I used my MW600 with my friend's Nexus One 2.2. It finally provides all the Bluetooth functions.
Petition SE to update to 2.2.
I´ve been told that issue is gonna be fit with the 2.1 upgrade. But that seems so far!!! cannot understand how they sell them togheter and don't work fine.
Hi,
I'm havig a very strange problem with my Omnia 7: the bluetooth headsets transmit only noises and/or a "robotic" voice during a call. People on the other side simple can't understand a word a say, although I hear them perfectly. I already tried three different headsets (two bluetooth 2.0 and one older) and the problem is always the same.
Also I noticed that the phone does not find any bluetooth devices if it has wi-fi turned on!
Is anyone experiencing the same problems? Any thoughts on this subject would be very much appreciated. Thanks
Ricardo
I dont know for your problem but I am facing bluetooth issue too...
I am not able to connect it to my car kit (Parot) ... I never had any problem with my preivous phones (HTC HD2, Desire, ...)
I am having exactly the same problem - and have upgraded to official Mango version.. Buetooth Audio is just not working at all. Did you guys ever solve this?
alexd83 said:
I dont know for your problem but I am facing bluetooth issue too...
I am not able to connect it to my car kit (Parot) ... I never had any problem with my preivous phones (HTC HD2, Desire, ...)
Click to expand...
Click to collapse
I had same problem with mine , it wouldnt connect to my Parrot minislim car kit. It was sent abck to Samsubg in UK and they replaced the board and now all works fine. I knew the replaced the board because when i git it back it had only 8GB memory; had to send it back a second time to get it changed to 16GB version. So, get on to Samsung and have that board changed!!
Mango update has broken my bluetooth
Thought I'd add my woes to this thread.
On t-mobile uk, omnia 7.
Got bored waiting for official mango so unbranded the phone and updated. All worked fine.
However bluetooth now wont connect to my car! BMW. (will find other peoples bluetooth phones etc.) This was working fine before the update.
Is the bluetooth a product of the firmware revision which is now 2424.11.8.5
or something else?
Is there going to be samsung specific stuff come out? and how does one get it?
Or whould i go back to t-mobile build (anyone know where to get this?) and wait for official update??!
Cheers
Rob
roblpm said:
Thought I'd add my woes to this thread.
On t-mobile uk, omnia 7.
Got bored waiting for official mango so unbranded the phone and updated. All worked fine.
However bluetooth now wont connect to my car! BMW. (will find other peoples bluetooth phones etc.) This was working fine before the update.
Is the bluetooth a product of the firmware revision which is now 2424.11.8.5
or something else?
Is there going to be samsung specific stuff come out? and how does one get it?
Or whould i go back to t-mobile build (anyone know where to get this?) and wait for official update??!
Cheers
Rob
Click to expand...
Click to collapse
as i posted in the other thread, just me being a numpty. dleting phone from car and readding was what was needed!!