Hi guys
I had a weird problem with the screen of my P3600...
I was using it as a gps with tomtom in a friends car, and that moment i had it screen down and was just supporting it with my hand on my leg. I was holding it gently and had no pressure on it!
I had turned of the screen and since we were on a highway i was just waiting for the exit witch was still a bit far. Around 5-10 minutes latter i turn around the phone and to my surprise the screen had 2 horizontal cracks all the way from one side to the other... The screen is still 100% visible and there were no liquid crystals spill, but 80% of the screen has no touch sensibility.
Resons why this happened? I would assume heat, since it was connected to the car lighter, and was on my leg, and also it was arround 35ºC... But then again, it wasn't unbearably hot, only warm... If it was because of this, i believe it has to be a factory fault. The screen has to be able to sustain more heat than this.
I've send it to RMA, but I'm afraid they just deny it saying it was because of a drop. There are no marks on the phone as it never dropped on the ground!
Anyway... Can you guys point me out to some site that sells spare screens for my P3600? I want to check out the prices so i have a better idea if they decide to charge for the repair, if they are charging too much, and if it's worth doing it myself.
Thanks in advance for any help!
(Sorry about my English )
im really desapointed about it, generally screens cost pretty much, i dont suggest buying new, asumming you have never drop the pda, you have to put press on them to change the screen with the warranty, go to other service poits and ask, they have to change the screen tell them to check everything inseide the phone first ( they can see if enything else is moved ( that means there was a drop) if not, they cant refuse to change the screen)
fixing it by your self seems to be hard.. ... i dont know... try harder making them change it free of charge...
similar problem
Last week when playing a game suddenly the screen went black and a couple of large cracks appeared on the screen. sound and phone were working but no picture.
I got the pda from my company and got it replaced right away, was told it was a known problem(in my company with a couple of hundred P3600 users)
Sorry for OT but I have to say it must be a cool company...
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
Hi folks. I have damaged my topaz but I'm not sure if it's the digitiser or the lcd screen, so I'll describe what happens:
The touch screen will stop responding after I've been using it and if I turn off the screen I can see a small dark patch (where my finger last touched it) with some small tiny 'bumps' surrounding this dark area. If I gently rub the screen with a soft cloth or similar, this dark area disappears and the touch screen starts responding again. However, I am having to do this procedure a lot - I mean like every 10 or 20 seconds if I'm touching the screen a lot or dragging stuff around - heck, it's a 'touch' phone, I can't help but touch it !!!
A new screen is a lot more than a new digitiser, and I figured that since the digitiser sits on top (right ) then it may be this that is u/s ?
Any help, comments or diagnostic clues are much appreciated.
Cheers, peace
Chris
umm, can it be water between the screen and touch sensor layer? Have you brought the phone to highly humid places, or something like that?
Some photos will definitely help identifying the problem.
Sounds like this:
http://forum.xda-developers.com/showthread.php?t=522813
I had it, and my provider repaired it. Unfortunaly I have the problems again... but not that much. When its getting too extreme, I'll send it back once again
^ I'd say that's it, I did find another post with a photo of something similar too.
I think mine happened when my wee girl got a hold of the phone -
I'm still a little unsure as to what component is damaged tho. Maybe a little 'investigation' with a screwdriver is needed ...
Thanks for the replies so far
Peace
Using a screewdriver will defenetly kill your guarantee. Mine was repaired for 0€$ ... I would try this first, as you can still offer it back when they say u have to pay few 100€$.
Hey,
So I noticed a problem with my phone that there's a section right accross the top of the screen that is not reponsive to touch, it's probly about a 1/4 inch or so and don't care what I do seems to solve it. I kinda noticed it from day one before I rooted and put on CyanMod ROM on it but since I never put any games as such on there before cause it would slow it down some I hardly ever had to touch that section of the screen for it to bother or stand out to me. Now I'm rooted and all and put some games on and notice it big time.
So I was wondering if there is something some of the development people here can do to fix it via software or something instead of me having to send it for repair? I called HTC about it and they said I can send it in but it would be for repair (charged) rather than warranty because I've unlocked the bootloader.
What do you more experienced people think? Maybe for some strange reason the touch screen area on my phone was enterred wrong or something so it covers a smaller area and so could just be written to cover the proper area size? Just thinking but I have no clue how that stuff works. I have no other issue with the screen like what I read others complaining about, everything else lines up fine and works fine just this... Any help appreciated!
Is the screen firmly fixed at the top? Does it click at all when you press it?
SC
Seems so, I checked all that but am nervous to try pushing any harder on it to be honest, no clicks
Edit: Even tried pressing that side of the screen outside the touch area and as close to the as possible, still no response and no clicks
The only reason I ask is that someone had an issue like that and used a hair dryer to warm it up and secure it...
Just a thought.. granted a wrong one :/
SC
Was their's unresponsive in the upper part as well or just clicking? I have hot air soldering tools for doing BGA repairs on xbox360's, PS3's and even an iPhone just Friday I repaired. If something like that would work sure have better tools for it than a hair dryer but wouldn't want to do damage anymore than what is already done to make repair costs higher.
Greets all,
I know probably this is the wrong section but I thought I would get a quicker response to my dilema. I was testing out my rom on my Test HD2 phone (I have two of them) and this one has the infamous end key issue, and tested my patience, so I read that if you use a very small flathead screw driver and push a certain place, you can get it to unstick, being that I tried all my methods that usually worked, I decide to try, well, the screwdriver slipped under the button part between the end key and the back key and screwed up my screen where I have all funny colors all over. So I was wondering if any could tell me if this is a LCD problem or a digitizer problem. There is no running liquid on the screen. The screenshot below is exactly what my screen looks like, and I want to buy the replacement, but I dont want to buy the wrong part and waste money, so can someone please let me know what it is that I have to replace? Thanks!
AngelDeath said:
Greets all,
I know probably this is the wrong section but I thought I would get a quicker response to my dilema. I was testing out my rom on my Test HD2 phone (I have two of them) and this one has the infamous end key issue, and tested my patience, so I read that if you use a very small flathead screw driver and push a certain place, you can get it to unstick, being that I tried all my methods that usually worked, I decide to try, well, the screwdriver slipped under the button part between the end key and the back key and screwed up my screen where I have all funny colors all over. So I was wondering if any could tell me if this is a LCD problem or a digitizer problem. There is no running liquid on the screen. The screenshot below is exactly what my screen looks like, and I want to buy the replacement, but I dont want to buy the wrong part and waste money, so can someone please let me know what it is that I have to replace? Thanks!
Click to expand...
Click to collapse
Its definetly an LCD issue, anyways not a major issue, as long as you can dismantle the phone and clear up the area btw the LCD and Keypad, i guess it should be back to normal
When you say Clear up the area, mind clarifying what that means? I can dismantle the phone, at this point it would probably be cheaper then sending for repair especially that its most likely out of warranty anyway.
I'm pretty much under the impression I am going to need to buy a lcd/digitizer combo to fix this. Unless I dont have to, cause like I said there is no bleeding and the phone works fine (minus the touchscreen issue caused by the end key) I can navigate thru the phone using droid explorers Screencast.
well what i intened to say was that there could be particles of dust or debris that is causing the LCD ribbon to come out a little, Coz i had a similar issue with "Dead touchscreen workin hard press end key " , later when i dismantled the phone and put it back again my screen looked exactly like yours, all i had to do was open it again and fix the LCD flex to the Main board properly thats all.
on a side note:
Well the touchscreen issue eventualy died all together, and i now have a replaced LCD from HTC and the screen is dull