Database Users

Phone switch problem

When asked by customer service to enter the ## insert number here # code to bring up the menu when trying to swap phones on an account the Shift only brings up contacts. This wasn't a problem until the phone was rooted. If anyone can shed light onto as why this would be happening this would be appreciated.

imwillzillla said:
When asked by customer service to enter the ## insert number here # code to bring up the menu when trying to swap phones on an account the Shift only brings up contacts. This wasn't a problem until the phone was rooted. If anyone can shed light onto as why this would be happening this would be appreciated.
Click to expand...
Click to collapse
what ROM are you using?

riggsandroid said:
what ROM are you using?
Click to expand...
Click to collapse
I bet an AOSP one. Those dialer codes only work in roms with Sense framework. And if I'm not mistaken, not Sense ports either. At least not all of them.
Sent from my Speedy Shift.

What if you install the epst.apk? Someone did this and said it works
Sent from my PG06100 using XDA App

Motorola Field Utils

So has anyone used this app since the 3.2 update? From what I can see, it has more capabilities to available then I seem to remember from before(though I could be wrong) and the sim slot can read sim cards now(at least it read my T-Mobile sim card). I did change my network in the settings to GSM/UTMS/EvDO/CDMA and in the phone information test area it now says GSM/CDMA Auto PRL just like my Nexus S does on T-Mobile, even after rebooting. Sadly I don't know if this even matters, or if all the changeable settings would allow the use of GSM. Nor do I know enough to attempt to make this work. Just thought I'd share my "findings", and if they are in fact useless I'm sorry for wasting peoples time.
Sent from my Xoom using XDA App

hmm where would i get that app? sounds interesting!
Sent from my Xoom using XDA App

Hold the volume up and down buttons as you turn the xoom on. You will see cold booting linux in the top left of the screen, followed by,more text like LTE off. Once the xoom is finished booting, in the app drawer there will be a Field Utils app with the Motorola logo. The codes will be 000000
I guess I'm really wondering if we can unlocked this device like we can phones.
Sent from my Xoom using XDA App

using a wifi only model. the unit has the field utils app however the six zeroes (000000) do not work for the spc password.

Yeah i saw this in the app list but never knew what it was. Cant do anything with it and dont see the apk in the usual directories. Dont think wifi only version would be able to get the cell network working as type hardware for it should be missing. Maybe there is hardware somewhere and maybe some day there may be guide how to install it and get it working.

marctronixx said:
using a wifi only model. the unit has the field utils app however the six zeroes (000000) do not work for the spc password.
Click to expand...
Click to collapse
had the same issue myself, tried all 5's as some websites said it was, also nothing.

Were can I find this app
Sent from my Xoom using XDA App

c1808us said:
Were can I find this app
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
Read post #3 in this thread......

yes when i get into the radio part it runs tests and says "CANT FIND NONE" LOL.. however there is a screen test and program (or some such) test that the wifi unit could still benefit from..
would like to know the correct SPC to at least try the other tests...
Tiger62651 said:
Dont think wifi only version would be able to get the cell network working as type hardware for it should be missing. Maybe there is hardware somewhere and maybe some day there may be guide how to install it and get it working.
Click to expand...
Click to collapse

[GUIDE] How to manually change the PRL on the Galaxy S III

For anyone interested in changing their PRL, the method is as simple as ever.
This is on a Sprint phone but should work with any CDMA carrier.
*I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE*
1. Be rooted!
2. Find your MSL. I had a hard time getting my phone to give the numbers using the terminal for some reason. It's much easier just to use "Get My MSL," which can be found in the Play Store for free.
EDIT: This app worked for me the first time using it, but no longer does. Download Terminal Emulator from the Play Store, type in "su" and enter it, then try typing "getprop ril.MSL" (capitalization is important)
3. Make sure you have downloaded the phone's drivers onto your computer.
4. Open your phone's dialer and type *#7284#"
5.PhoneUtil should now be open. Click on "Qualcomm USB Settings" and select "DM + Modem + ADB." Remember to change this back after you change your PRL.
6. Plug your phone into your computer; let your phone recognize the phone.
7. Download your preferred PRL from the internet. I usually use 11115, but you can use whichever one you find best.
8. Open "Device Manager" on your computer; click on "Ports" and see which COM port your phone is connected to on your PC.
9. Use the program "CDMA Workshop" to connect to your phone by selecting the correct COM port, clicking "Connect," and then clicking "Read."
10. Go to the "Security" tab and put in your MSL into the box under "SPC." Click the "SPC" button and click "Send." It should say that the phone is unlocked.
11. Under PRL, click "Write" and select the PRL you want to switch to.
12. It should say that it successfully wrote; exit the program and let it reboot the phone when it asks.
13. Enjoy your new PRL!
Sent from my SPH-L710 using XDA

elfhater said:
2. Find your MSL. I had a hard time getting my phone to give the numbers using the terminal for some reason. It's much easier just to use "Get My MSL," which can be found in the Play Store for free.
Click to expand...
Click to collapse
Are you saying this actually works for you?

You can use this method to update prl without a computer also....
http://forum.xda-developers.com/showthread.php?t=1660740
Sent from my Galaxy Nexus using Xparent ICS Blue Tapatalk 2

nabbed said:
Are you saying this actually works for you?
Click to expand...
Click to collapse
It's funny you say that; it worked for me the first time I used it, but now that I checked again it can't find it. Any idea why?

Epix4G said:
You can use this method to update prl without a computer also....
http://forum.xda-developers.com/showthread.php?t=1660740
Sent from my Galaxy Nexus using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
I cannot get this to work. What am I doing wrong? I followed the instructions and tried TEST.prl and Test.prl, and I'm using any cut 1.0.
---------- Post added at 10:21 AM ---------- Previous post was at 09:48 AM ----------
EDIT: This any cut thing doesn't really work, does it?

i have tried both methods and they both work.
question i have is.
have any of you actually been able to force roam?
i have managed to change the prl quite easily but thin phone will not roam for the life of me which sucks because i live in a 1x area...

dtr145r said:
i have tried both methods and they both work.
question i have is.
have any of you actually been able to force roam?
i have managed to change the prl quite easily but thin phone will not roam for the life of me which sucks because i live in a 1x area...
Click to expand...
Click to collapse
I haven't tried force roaming, however I have successfully roamed on the Verizon network (at least according to the "Netmonitor" app).

Any way to get MSL without root? It's just good to have it "just in case". Only time I ever actually used it was to completely deactivate and remove info from my Epic 4G once I had my SGS3 activated.

What is PRL?
Sent from my SGH-T999 using xda app-developers app

rakeshchn said:
What is PRL?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Preferred Roaming List; it tells the phone when and where to roam whenever there isn't sufficient service coverage from Sprint.

Apex launcher - it doesn't work.
TW launcher - it does.

Please see carrier specific instructions in Develpment section
Thanks
FNM

use it for wifi only

Is there a way to use the phone with a rom for wi-fi only use? I don't want my phone number associated with the phone, I did a factory reset and installed CM on it but it still shows my phone number.

davida72 said:
Is there a way to use the phone with a rom for wi-fi only use? I don't want my phone number associated with the phone, I did a factory reset and installed CM on it but it still shows my phone number.
Click to expand...
Click to collapse
If its activated, then it will show your phone number, that info is stored in a separate partition from /data (this is cleared with a "factory reset") and from /system (this is where roms are installed to)

Either use the Ubersonic Inactive Device ROM or cancel/deactivate the phones cellular account.

Even if you cancel /deactivate the account the old number will be shown. The only way to get rid of the number is to remove it with qpst. That is a bunch of work with no real gain. Just don't worry about it and use any rom of your choice.
Sent from my PC36100 using xda app-developers app

Even if the phone was deactivated and then wiped, it would still come up?
The phones number? Not the ESN/MEID

9h0s7 said:
Even if the phone was deactivated and then wiped, it would still come up?
The phones number? Not the ESN/MEID
Click to expand...
Click to collapse
Yes that is what we all have said. Yet you can edit out the phone number in qpst. Then only thing shown on a rom would be the esn/meid.
Sent from my PC36100 using xda app-developers app

davida72 said:
Is there a way to use the phone with a rom for wi-fi only use? I don't want my phone number associated with the phone, I did a factory reset and installed CM on it but it still shows my phone number.
Click to expand...
Click to collapse
Good question OP, it is a somewhat obscure topic.
I'm not going to try and tell you what you should or shouldn't worry about.
Do what you want.
If you decide it to be necessary here is the concept you need that can be done from your phone.
http://www.howardforums.com/showthread.php/1729751-Intercept-Factory-Reset-AND-erase-phone-number
Do this after ##786#
##YourMSL#
Fill both lines (MDN/MSID) with anything.
Menu
Commit Modifications
Reboot
Done
Now check your MDN

looks like the ubersonic rom might be what I'm looking for, going to give it a try!
Thanks for suggesting that.

davida72 said:
looks like the ubersonic rom might be what I'm looking for, going to give it a try!
Thanks for suggesting that.
Click to expand...
Click to collapse
Yeah, that's what I would do.

Just got it installed, looks like that is what I was looking for. Going to use it at work with a generic Pandora login for everyone in my area to use. Thanks again for the suggestion!

Thank you to the OP for this idea... I didn't even think to use my old evo as a wifi pandora radio. I knew I kept this thing around for a reason

What I do is toggle airplane mode "on" then toggle WiFi "on". This shuts off the phones radio and some other things that really drain your battery. I have kept mine on for almost 3 days without it dying.
Sent from my Galaxy Nexus using Tapatalk 2

Hotspot hack

Is there a hotspot hack for the 10 yet?

Check out bad boys rom
Sent from my 2PS64 using Tapatalk

I'm looking for a stock Rom with hotspot unlocked or a tether app that works. Ideas?

Scrufdog said:
I'm looking for a stock Rom with hotspot unlocked or a tether app that works. Ideas?
Click to expand...
Click to collapse
I could put something together if u want to test, this would be a flashable add-on after flashing one of the stock rooted already posted...

OMJ said:
I could put something together if u want to test, this would be a flashable add-on after flashing one of the stock rooted already posted...
*edit* see attatched
Click to expand...
Click to collapse
I'd be interested in a hotspot flashable add-on as well. At least until GPS is up and running on BB rom. Thanks OMJ

OMJ said:
I could put something together if u want to test, this would be a flashable add-on after flashing one of the stock rooted already posted...
*edit* see attatched
Click to expand...
Click to collapse
10 downloads, no responses?
Sent from my unknown using XDA Labs

Appreciate the work OMJ. I never installed the hotspot hack because I went straight to your badboyz rom instead.

so 10 peole that downloaded, did it work? lol geez thanks OMJ for those who didnt tell you

If you want to continue to use stock room, and need hot spot, there is a trick using the app shortcut master from the market where you just have to edit 1 line . It works on LG g2 and g3 (I used it). If anyone wants to try, I'll look for a link to the directions.
Sent from my 2PS64 using XDA-Developers mobile app

scottspa74 said:
If you want to continue to use stock room, and need hot spot, there is a trick using the app shortcut master from the market where you just have to edit 1 line . It works on LG g2 and g3 (I used it). If anyone wants to try, I'll look for a link to the directions.
Sent from my 2PS64 using XDA-Developers mobile app
Click to expand...
Click to collapse
Could you post directions for this.

This may be what he is talking about. Used it also on my LG G2.
Have not tested on HTC 10 though.
http://forum.xda-developers.com/showthread.php?t=2889436.
Sent from my 2PS64 using Tapatalk

fryguy said:
This may be what he is talking about. Used it also on my LG G2.
Have not tested on HTC 10 though.
http://forum.xda-developers.com/showthread.php?t=2889436.
Sent from my 2PS64 using Tapatalk
Click to expand...
Click to collapse
Good work. That is exactly what I was referring to. Thank you. I hadn't seen the request. I have no idea if it would work on HTC 10. But, it doesn't seem like a huge stretch that it would.
Sent from my 2PS64 using XDA-Developers mobile app

scottspa74 said:
Good work. That is exactly what I was referring to. Thank you. I hadn't seen the request. I have no idea if it would work on HTC 10. But, it doesn't seem like a huge stretch that it would.
Sent from my 2PS64 using XDA-Developers mobile app
Click to expand...
Click to collapse
No good. Those values don't show up in shortcut master.
Anyone had any luck with this? I can't find the file that OMJ is talking about to save my life. I don't see any attachments.
I've tried editing my build.prop and I've tried editing the default xml to change the rules and enforcement to 0.
The latter DID let the hotspot start for me. Other devices can connect. But they never get network connectivity.
Can anyone help me confirm what I'm missing?

Fabio Grasso's WiFi Tether app works for me on the 10.
https://sites.google.com/site/wifitetherrouter/

I can't get it to work on mine! I've achieved root, installed the app, matched all the settings up....no internet connection. It's strange, my Ipad can see the network and it says it's connected. As soon as I connect it though I lose internet connection on both devices, can't load a single web page. Did you have this issue at all or would you have any idea what would cause this? I'm at my wits end with it, and I've used this app for 2 years on my M8.

landaile said:
Fabio Grasso's WiFi Tether app works for me on the 10.
https://sites.google.com/site/wifitetherrouter/
Click to expand...
Click to collapse
HAH. I couldn't get it to work with this app (not initially anyway). I turned to his site to check if there were settings already available to use for the HTC 10 because it couldn't auto-detect the wifi adapter name. On his site, it says HTC users need to uninstall "TetherGuard" - system app.
Did that, figured I'd reboot and try the built in tethering which now works beautifully. Got it still within my refund window for Wifi Tether Router.
So some combination of what I posted above plus UNINSTALL TETHERGUARD! And life's good now. Thanks much.

ShadowDrake said:
HAH. I couldn't get it to work with this app (not initially anyway). I turned to his site to check if there were settings already available to use for the HTC 10 because it couldn't auto-detect the wifi adapter name. On his site, it says HTC users need to uninstall "TetherGuard" - system app.
Did that, figured I'd reboot and try the built in tethering which now works beautifully. Got it still within my refund window for Wifi Tether Router.
So some combination of what I posted above plus UNINSTALL TETHERGUARD! And life's good now. Thanks much.
Click to expand...
Click to collapse
It didn't give me the option to uninstall, just disable. I did that and tweaked with a few more things and that seemed to fix it. Fingers crossed!

shaky_handed_surgeon said:
It didn't give me the option to uninstall, just disable. I did that and tweaked with a few more things and that seemed to fix it. Fingers crossed!
Click to expand...
Click to collapse
You can use Titanium Backup to uninstall TetherGuard since you're rooted, instead of just disabling it.

Anyone want to post the specific changes/tweaks they've done? I've done changes to build.prop and default.xml (using the various settings found all over XDA) and also disabled/removed TetherGuard, but I'm still stuck at hotspot enabling but no data connection for any connected devices (data still works for the phone while hotspot is on though).

steelvulture said:
Anyone want to post the specific changes/tweaks they've done? I've done changes to build.prop and default.xml (using the various settings found all over XDA) and also disabled/removed TetherGuard, but I'm still stuck at hotspot enabling but no data connection for any connected devices (data still works for the phone while hotspot is on though).
Click to expand...
Click to collapse
The apns have to be modified, we used to edit the database manually, but now edit in framework-res, I'll post a zip later.
Sent from my HTC 2PS64 using XDA Labs