Hello there,
I have a MDA from T-Mobile germany PW10A2 with an RUU version which was probably 3-13-12-GER and a RSU which was probably T360.
I dowloaded 2 update files on the site of T-mobile germany:
http://www.t-mobile.de/shop/handy/1,4855,2963-_50-0-99,00.html
- t_mobile_mda_ppc_update_v3_19_03.exe
- t_mobile_mda_gsm_gprs_update_v3_23.exe
Since I wrotte them an Email, no answer, and the page has been cancelled.
What have I done:
- I installed the PPC 3.19.03 through Activesync: no problem
- I then installed the GSM GPRS update: once it started updating on my MDA at 10% it kept stucked. After 20 mn I decided to interrupt.
Since that day I have the white screen with the litle keyboard down right and that's about it.
My boot loader is V5.15. when it runs it displays "WAIT", and then "GSM ERROR"
As suggested in this Forum, I bought an SD Card, and a card reader writter, I wrote the RUU file NK.nbf contained in the downloaded .exe file from T-mobile. I flashed my room (proposed when I cold reseted the Wallaby) and then : NOTHING HAS CHANGED !!!
I tried again with a cooked Rom flashing a NK.nb1 file and... I got the ROMKitchen splash screen and... nothig else.
The display stays all white, you can read "this ROM was cooked in the ROM Kitchen" all on top af the screen and in the lower right side I still have the keyboard Icon.
Now I'm really worried !
Does any one have a suggestion ?...I believe my problem is realy serious.
Pascal
Hate to tell u that mate, but if your device can't be recognized by ActiveSync, then the only action is to get the device to be repaired by a specialized center or replaced.
However, check this topic carefully .. it might help
http://forum.xda-developers.com/viewtopic.php?t=4123
Good luck
Good news bad news
I have an SX56 with att, I had the same problem. rsupgrade failing at 1%, hard reset, and then the device white screned. First, downgrade the rom. Find the old update program, open it with winzip (or winrar) and you should be able to extract the rom image. get http://wiki.xda-developers.com/wiki/XDAtools place the rom on an sd, softboot while holding down the power button. the device will now offer you the option to load the rom from the sd, do so. once this is done the device should display the old roms ID. If this works, format the SD card, create a directory 2577 copy the program RSUpgrade and associated files, rename it as autoexec insert the card in the phone, and you should be able to reflash the RSU, if this fails.... time to break out the jtag header or be ready to send the unit in
My MDA is dead and buried
Thanks to both of you guys, for your concern.
I had actualy already tried your proposed solutions (I had found in this forum except yours rszasz).
My MDA is less than 2 years old and I took it to a T-mobile shop in germany (during a business trip). They're proposing either to repair it, or to replace it (The guarantee is still runing).
After having flashed a cooked a rom in the kitchen, I still had the same problem, so in the perspective to bring it back to a T-mobile store, I reflashed the faulty file I had downloaded on the T-mobile Web site.
I hoppe they won't find out and make any trouble.
I like this MDA so much, I don't remember how it was without it !
All the best
Pascal
Re: My MDA is dead and buried
Pewinski said:
Thanks to both of you guys, for your concern.
I had actualy already tried your proposed solutions (I had found in this forum except yours rszasz).
My MDA is less than 2 years old and I took it to a T-mobile shop in germany (during a business trip). They're proposing either to repair it, or to replace it (The guarantee is still runing).
Pascal
Click to expand...
Click to collapse
send the phone to me, I could repair for you!
Thank's but it's under guarantee and I get it repaired or a new one for nothing.
Best regards
All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin
YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...
Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!
Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.
Works great on all versions.
Great support from the boys from emeicheck
Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!
Yes you must do it all.
HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?
REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye
Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....
KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.
O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks
I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message
Did you unlock with imei-check? What is your model ID ARTExxxx ?
Yes i did. My Model ID is ARTE100
Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.
Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me
Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX
Hi to everybody.
I would want to set you a very strange problem that has happened to one friend of mine. He has installed the original ROM wm5 and he wants to pass to wm6, once connected the pda to the computer activesync unfortunately it tries to syncronize him but remains to syncronize to the endless (1° strangeness) one.
Later starting the official updating htc downloaded by the site, continuing with the instructions and reaching the prophetic moment in which the pda is disconnected by activesync and puts on in formality bootloader to adjourn from the prophetic error 260 that I have documented and I bring here you him:
Me being a little hacker and almost all knowing the methods to upgrade the ROM I have recommended him to try to put in formality bootloader to extract the content of the original file and to make to depart the file ROMUpdateUtility, but also them error 260. Not giving me for defeated I have tried the last method from me known, the updating from micro sd card.I have dictated him footstep footstep what had to do but not even this time of it to wanted to know to adjourn him (2° strangeness, doesn't know however if has correctly done all finding himself him in the Marche and me in Sicily ). I think that can treat more specifically him of the pc of the operating system, even if he has told me that it has the xp.
Now I put me in your hands, aspect suggestions on as to resolve.
I thank you in advance
And excuse me for mine bad bad..... English
To get your P3300 back to live
Don't worry if things goes wrong sometimes.
1.What you can do is maybe a good option if you have a P3300 without a
provider then you can better going
to the website of Htc register yourself (its free!) Then register
your model of your Htc Product.
Go to the Htc club. you will find your originale udate rom!!! This is also
to find it here.
2. There is a nother option.
copy your RUU_singned img to a sd card and put the sd card bac to
your P3300.
Start the bootloader by pressing the both key rec. and power
and hold em when your do a reset.
You will see a 3 color line on your screen then you will see
the install progres from your img.
wait and follow the instruction on that display.
I had also a problem a month ago but and this option by the sd card
did working fine for me.
Now I update the software and also the dial pad to vista look. That is
realy awesome!
It's working fine and do its job what this model has to do!
Succes and good luck!
PLEASE I need help! I have an htc p3300 and when I try to update it goes up to 3% and turns off. There isn't any rom that I haven't tried but noone worked . Is there anything I can do ? Thanks in advance
...
takes sd card out..
you done uspl.. if not.. click it in my signature..
Hi all. I just got Wing and its my first WM phone. I need help and I'm asking after I did all the searching possible and got some tips but I was unable to fix the problem Im having. I am not exactly what you would call a noob as I have flashed and moded many phones with Moto, Blackberry, Symbian and Linux Mobile OS's. Ok enough bragging haha.
Anyways I have downloaded the Herald-USPL-Beta3 and the NBH file and followed the exact instructions. The USPL is extracted in C:\, the folder is named "upgrade" and the NBH file is extracted to the RUU folder within the USPL folder. I have fresh install on Tmobile branded SPL higher than 4.0 and have installed the .CAB file found in the USPL and have softreseted the phone.
I have done this like 10 times already and every time I try to flash I get this:
The system cannot find the path specified. Then it starts to say 25%, 50%, 75% and then it says I should have the Active Sync icon gray and my phone screen blank. Well that never happens and when I hit Enter anyways it says that its lunching the RUU and two seconds later it tells me its all good to go and to hit Enter and when I do it exits out.
I have also turned the firewall off and hev no antivirus running.
Please help!
I was amazed of how modable this phone seemed but it looks like it going on EBAY and my SIM back in my Blackberry Curve..
Thanks!
ps Today I tried different PC and same thing happened..
wow.. anybody?
I'm starting to think Im either an idiot or I have the only Wing on this forum that wouldnt flash..
I bought a HTC touch with Android on it off ebay for sprint. I did not even know that this phone did not come with android to show how little I know about phones... So I tried to activate it and that worked fine till I got to the part where you enter the ##nnnnnn# number to put in the msid. So ops it dont work. I dont even know how to get files on my phone, when I plu it in it does come up under ky computer. I can put stuff on the memory card but don't know how to use it under android. Some one told some else on this forum that you have to flash it back to windows change it and flash it back. there was another person that said to use a plrgram on the phone called get spc or something like that which I tried but I don't know how to get it from the memory card to the phone or how to run the program off the memroy card with android. I used Astro (don't enen know if that is what astro is for) and tried to launch the program in the phone and it said it didn't know what to do with and exe file. I am so stuck. Sorry to be such a pain.. Can any one help. All I really want to do is change the msid and that msn number or what ever that second number is called.
Thanks everyone.
Randy
Post screen shots+problem details
please
breife with details
Sprint are CDMA no? That means you have an Vogue, not an elf. Whilst your lucky you can have froyo, you have also ended up in the wrong section. Hopefully a mod will move this
Moved to Vogue section.
As for your problem, I personally don't know how to mess with programming settings on Android (I know it can be done via CDMA Workshop, but you need to get the program to do this and even still it isn't easy). Flash back to WM (look for NFSFan's rom, you should be able to flash with no issues as your phone is unlocked). Once you have flashed, you can easily do the PST programming from the Phone Codes folder. You can flash back to Android afterwards.
I hope this helps.